Experimental and Quantum Chemical Studies of 2-Phosphinylphenol Derivatives

Carbon-oxygen bonds ortho to a phosphoryl group in triarylphosphine oxides undergo cleavage when the oxides are either fused with potassium hydroxide or treated with potassium tert-butoxide in refluxing toluene, presumably through a nucleophilic addition-elimination mechanism. Thus, bis(2-hydroxyphenyl)phenylphosphine oxide is produced along with the expected 2-phenoxyphenyl(phenyl)phosphinic acid from 10-phenyl-10H-phenoxaphosphine 10-oxide. The latter starting material is also produced, together with bis(2-hydroxyphenyl)phenylphosphine oxide, when bis(2-methoxyphenyl)phenylphosphine oxide is fused with potassium hydroxide. Fusion of bis(2-methoxyphenyl)phenylphosphine oxide with sodium hydroxide, however, yields 2-hydroxyphenyl(phenyl)phosphinic acid. Ab initio quantum chemical studies confirm that the downfield ³¹P chemical shift that is observed in 2-phosphinylphenols is due to hydrogen bonding to the phosphoryl group.     

Cyclic(arylene ether) oligomers containing the phenylphosphine oxide moiety

A series of cyclic(arylene ether) oligomers containing the phenylphosphine oxide moiety has been synthesized by reaction of bis(4-fluorophenyl)phenylphosphineoxide with dihydroxy compounds 1a–d as well as 1,2-dihydro-4-(4-hydroxyphenyl) (2H)phthalazin-1-one in DMF in the presence of anhydrous K₂CO₃ under high dilution conditions. These cyclic oligomers are amorphous and have high solubility in organic solvents. The MALDI-TOF-MS technique has been used as a powerful tool to analyze these cyclic systems. The cyclic(arylene ether) oligomers readily undergo anionic ring-opening polymerization in the melt at 350°C by using potassium 4,4′-biphenoxide as the initiator, affording linear, high molecular weight poly(arylene ether)s containing the phenylphosphine oxide moiety. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 519–526, 1998     

Evaluation of acylphosphine oxide polymerization initiators using differential scanning calorimetry

This study examines the polymerization of dental monomers catalyzed by synthesized acylphosphine oxides in a differential scanning calorimetry (DSC) cell. This research focuses on establishing a relationship between radicals generated by the acylphosphine oxide photoinitiators and the kinetic reaction rates of methyl methacrylate (MMA) and acrylamide (ACM), a model monomer. The thermal stability of mono- and di-acylphosphine oxides was examined by DSC. Endothermic melting and exothermic polymerization reactions initiated with the two initiators were recorded. The acrylamide model system laid the ground work for the critical evaluation of the synthesized new initiators of mono (2,4,6-trimethylbenzoyl) diphenylphosphine oxide, and bis(2,4,6-trimethylbenzoyl) phenylphosphine oxide. The bis(acyl) phosphine oxide photoinitiator was more reactive than the mono-(acyl) phosphine oxide with methyl methacrylates under laboratory conditions. In exothermic reactions, temperatures rose higher and more rapidly for bis(acyl) phosphine oxide initiated reactions than mono-(acyl) phosphine oxide initiated reactions.     

Synthesis of P,B-containing heterocycles based on bis(α,2-dihydroxybenzyl)phenylphosphine

Conclusions Reaction of bis(,2-dihydroxybenzyl)phenylphosphine and its derivatives with the isobutyl ester of diphenylboric acid, the anhydride of phenylboric acid, and boric acid in the presence of amines forms ammonium 2,8,9-trioxa-1-borata-4-phospha-6,7-benzobicyclo[3.3.1] non-6-enes. Reaction with 2 equivalents of the isobutyl ester of diphenylboric acid gives bis(triethylammonium 2,2-diphenyl-5,6-benzo-1,3,2-dioxaborin-4-yl)phenylphosphine oxide.Deceased.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 946–951, April, 1989.     

含磷聚醚醚酮酮砜的合成与表征

聚芳醚酮(PAEK)具有优良的热性能、机械性能、电绝缘性能及耐化学药品性,在航空航天、电子电器、核能工业以及民用高技术领域有着广泛的应用[1].聚芳醚酮熔融温度高且难溶于一般有机溶剂,不易加工.为改善聚芳醚酮的溶解性和加工性,可采取在主链中引入大的侧基、柔性基团、扭曲的非平面结构和采用共聚等方法[2～5].     

Flame-retardant polyurethanes from phosphorus-containing isocyanates

Phosphorus-containing polyurethanes are synthesized by reacting phosphorus-containing diisocyanates, bis (4-isocyanatophenoxy) phenyl phosphine oxide (BIPPO) and bis (3-isocyanatophenyl) phenyl phosphine oxide (BIPPPO), with various diols. The chemical structures of the obtained monomers and polymers are characterized by IR, ¹H- and ³¹P-NMR spectroscopy. Thermal analysis of the phosphorus-containing polyurethanes reveals that incorporating phosphorus into the polymers increases exothermicity during their decomposition. According to these results, the phosphorus-containing polyurethanes are less thermally stable than conventional polyurethanes. Char yield and LOI measurements demonstrate that incorporating phosphorus into polyurethanes markedly improves their flame retardancy. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1769–1780, 1997     

13C nuclear magnetic resonance of organophosphorus compounds XI—aminophosphines

Natural abundance ¹³C NMR studies have been carried out on a series of organophosphorus compounds possessing P? N bonds. For the first time a one-bond temperature-dependent ¹³C—³¹P nuclear spin coupling was observed for the P-phenyl carbons in bis(N,N-dibenzylamino)phenylphosphine (0-9 Hz) and bis(N,N-diethylamino)phenylphosphine (0–2 Hz). This temperature-dependent behavior can be rationalized in terms of free rotation about the phenyl phosphorus bond with concomitant hindered rotation about the P? N bonds. A conformational preference for the nitrogen and phosphorus lone pairs to exist in the trans orientation is indicated. In the similarly substituted 5-membered heterocyclic ring compound, 1,3-dimethyl-2-phenyl-1,3-diazaphospholidine, the phenyl one-bond coupling increases to (?) 42.1 Hz and becomes temperature independent. These data suggest that ¹J(PC) is very responsive to electronic effects.     

Synthesis and Crystal Structures of Phosphorus-and Selenium-Containing Medium-Sized Heterocycles and Macrocycles

Abstract

New phosphorus- and selenium-containing heterocyclyes, 1,3,2,6-dioxa-phosphaselenacyclooctanes (la-lo), were synthesized in ca. 10% yields from 3-selena-l,5-penta-diol and RP(X)Cl₂ where R = alkoxyl, aroxyl, aryl and X = 0 or lone pair. Three macrocycles 3, 4 and 5, which were expected to be heterodinucleating ligands, were obtained in moderate yields (20–30%) from bis(o-bromomethylpheny1)phenylphosphine oxide 2 and corresponding selenium-containing materials.     

Nickel and iron complexes with N,P,N-type ligands: synthesis, structure and catalytic oligomerization of ethylene

The N,P,N-type ligands bis(2-picolyl)phenylphosphine (), bis(4,5-dihydro-2-oxazolylmethyl)phenylphosphine (), bis(4,4-dimethyl-2-oxazolylmethyl)phenylphosphine () and bis(2-picolyloxy)phenylphosphine () were used to synthesize the corresponding pentacoordinated Ni(ii) complexes [Ni{bis(2-picolyl)phenylphosphine}Cl(2)] (), [Ni{bis(4,5-dihydro-2-oxazolylmethyl)phenylphosphine}Cl(2)] (), [Ni{bis(4,4-dimethyl-2-oxazolylmethyl)phenylphosphine}Cl(2)] () and [Ni{bis(2-picolyloxy)phenylphosphine}Cl(2)] (), respectively. The hexacoordinated iron complexes [Fe{bis(2-picolyl)phenylphosphine}(2)][Cl(3)FeOFeCl(3)] (), [Fe{bis(4,5-dihydro-2-oxazolylmethyl)phenylphosphine}(2)][Cl(3)FeOFeCl(3)] () and the tetracoordinated complex [Fe{bis(4,4-dimethyl-2-oxazolylmethyl)phenylphosphine}Cl(2)] (abbreviated [FeCl(2)(NPN(Me2)-N,N)]) were prepared by reaction of FeCl(2).4H(2)O with ligands , respectively. The crystal structures of the octahedral complexes and , determined by X-ray diffraction, showed that two tridentate ligands are facially coordinated to the metal centre with a cis-arrangement of the P atoms and the dianion (mu-oxo)bis[trichloroferrate(iii)] compensates the doubly positive charge of the complex. The cyclic voltammograms of and showed two reversible redox couples attributed to the reduction of the dianion (Fe(2)OCl(6))(2-) (-0.24 V for and -0.20 V for vs. SCE) and to the oxidation of the Fe(ii) ion of the complex (0.67 V for and 0.52 V for vs. SCE). The cyclic voltammogram of [FeCl(2)(NPN(Me2)-N,N)] showed a reversible redox couple at -0.17 V vs. SCE assigned to the oxidation of the Fe(ii) atom and an irreversible process at 0.65 V. The complexes , and [FeCl(2)(NPN(Me2)-N,N)] have been evaluated in the catalytic oligomerization of ethylene with AlEtCl(2) or MAO as cocatalyst. The nickel complex proved to be the most active precatalyst in the series, with a turnover frequency (TOF) of 61 800 mol(C(2)H(4)) mol(Ni)(-1) h(-1) with 10 equiv. of AlEtCl(2) and 12 200 mol(C(2)H(4)) mol(Ni)(-1) h(-1) with 200 equiv. of MAO. Precatalysts and were the most selective in butenes, up to 90% with 6 equiv. of AlEtCl(2) and 89% with 2 equiv. of AlEtCl(2), respectively, and up to 92% butenes with 400 equiv. of MAO and 91% butenes with 200 equiv. MAO, respectively. The best selectivities for 1-butene were provided by and AlEtCl(2) (up to 31% with 6 equiv.) and with MAO (up to 72% with 200 equiv.). The iron complexes were not significantly active with AlEtCl(2) or MAO as cocatalyst.     

Novel photocurable monomers: The synthesis of difunctional vinyl ethers with a phosphonate group and difunctional 1‐propenyl ethers with a phosphonate group and their photoinitiated cationic polymerization

Phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were prepared by the regioselective addition reaction of glycidyl vinyl ether (GVE) or 1‐propenyl glycidyl ether with diaryl phosphonates with quaternary onium salts as catalysts. The reaction of GVE with bis(4‐chlorophenyl) phenylphosphonate gave bis[1‐(4‐chlorophenoxy methyl)‐2‐(vinyloxy)ethyl]phenylphosphonate in a 68% yield. The structures of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were confirmed by IR and ¹H NMR spectra and elemental analysis. Photoinitiated cationic polymerizations of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were investigated with photoacid generators. The polymerization of vinyl ether groups and 1‐propenyl ether groups of the obtained monomers proceeded very smoothly with a sulfonium‐type cationic photoinitiator, bis[4‐(diphenylsulfonio)phenyl]sulfide‐bis(hexafluorophosphate), upon UV irradiation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3105–3115, 2005     

Synthesis of new macrocyclic aminomethylphosphines based on 4,4"-diaminodiphenylmethane and its derivatives

The reaction of bis(hydroxymethyl)phenylphosphine with 4,4"-diaminodiphenylmethane in DMF afforded 1,1",5,5"-bis[methylenedi(p-phenylene)]di(3,7-diphenyl-1,5-diaza-3,7-diphosphacyclooctane) (1) whose structure was established by X-ray diffraction analysis. Sulfurization and oxidation of macrocyclic tetraphosphine 1 gave rise to products 2 and 3, respectively, compound 3 being obtained as a stable hexahydrate. The reaction of bis(hydroxymethyl)phenylphosphine with bis(4-N-methylaminophenyl)methane in DMF followed by sulfurization yielded monocyclic bis{methylenedi[p-phenylene(N-methyl)aminomethyl]}di(P-phenyl)phosphine sulfide (4).     

Melt-polymerizable bisimido-bisphthalonitriles containing silicon,fluoro, and ether groups: Synthesis,characterization, and NMR study

Various melt-polymerizable bisimido-bisphthalonitrile polymer precursors were synthesized by the reaction of 4-aminophthalonitrile (4-APN) with bis(3,4-dicarboxyphenyl) dimethylsilane dianhydride (SIDA), 4,4′-hexafluoroisopropylidene diphthalic anhydride (6FDA), bis(3,4-dicarboxyphenyl)ether dianhydride (ODPA), and 3,3′, 4,4′-tetracarboxylichenzophen+ne dianhydride (BTDA) in an aprotic solvent. The synthesized monomers showed crystalline melting at 269 and 271°C. Elemental analysis, differential thermal analysis (DTA), infrared (IR), nuclear magnetic resonance (¹H-NMR) and mass spectral studies were carried out to characterize the synthesized monomers. Thermogravimetric analysis (TGA) of the synthesized monomers showed their thermal stability at 410–400°C. A detailed study and NMR investigation of the first step of condensation reaction was carried out and indicated the formation of a transient charge transfer complex. Thermal cyclization of the formed intermediate, however, gave the required monomers. A preliminary study demonstrated that melt-polymerization of the synthesized monomers gave thermallystable, tough polymers.     

Blends of Aromatic Polyethers Bearing Polar Pyridine Units and Their Evaluation as High Temperature Polymer Electrolytes

Aromatic polyethers containing polar pyridine units in the main chain have been synthesized using different difluoride monomers. Copolymers of 2,5-(4′,4″dihydroxy biphenyl)-pyridine and 3,3′,5,5′-tetramethyl-[1,1′-biphenyl]-4,4′-diol with bis(4-fluorophenyl) sulfone or phenyl phosphine oxide difluoride or decafluorobiphenyl (PTMPySF, PTMPyPO, PTMPyDF) were synthesized. These polymeric structures despite their common structural characteristics, showed totally different behavior in terms of solubility and acid doping ability. Blends of these copolymers have been prepared in order to be evaluated in terms of fuel cell relevant parameters like acid doping ability and conductivity. In most cases flexible membranes were obtained by solution casting. The acid doping ability was controlled based on the blend constituents and composition. The doped membranes exhibited high conductivity values, in the range of 10⁻³ S/cm at room temperature which is increased at 2.5 × 10⁻² S/cm at temperatures up to 180 °C.     

Fluoride‐terminated hyperbranched poly(arylene ether phosphine oxide)s via nucleophilic aromatic substitution

A series of AB_x‐type triarylphosphine oxide monomers, bis‐(4‐fluorophenyl)‐(4‐hydroxyphenyl)phosphine oxide ( 4a ), bis‐(3,4‐difluorophenyl)‐(4‐hydroxyphenyl)phosphine oxide ( 4b ), and 4‐hydroxyphenyl‐bis‐(3,4,5‐trifluorophenyl)phosphine oxide ( 4c ) were prepared, characterized, and polymerized under nucleophilic aromatic substitution conditions [N‐methylpyrrolidone (NMP), K₂CO₃] to provide the corresponding hyperbranched poly(arylene ether phosphine oxide)s with number‐average molecular weights ranging from 9200 to 14,600 Da. NMR spectroscopic analysis indicated the presence of highly branched products with an approximate degree of branching of 0.57. The polymers were soluble in a variety of typical organic solvents and displayed excellent thermal stability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1456–1467, 2002     

Polyamides incorporating phosphine oxide groups. I. Wholly aromatic polymers

Five novel polyamides incorporating phosphine oxide groups have been synthesized by the condensation reaction of bis(4-carboxyphenyl)phenylphosphine oxide with a series of aromatic diamines. The thermal properties of these polymers were investigated by differential scanning calorimetry and thermogravimetric analysis. Glass transition temperatures in the 225–254°C range were recorded, together with good thermooxidative stability (5% weight loss occurring at >420°C) and high char yield upon prolonged heating at 650–800°C (24–50%). Also, good solubility in aprotic polar solvents was observed for all polyamides synthesized. © 1996 John Wiley & Sons, Inc.     

Synthesis,photopolymerization and adhesive properties of new hydrolytically stable phosphonic acids for dental applications

Novel monomers 2‐(N‐methylacrylamido)ethylphosphonic acid, 6‐(N‐methylacrylamido)hexylphosphonic acid, 10‐(N‐methylacrylamido)decylphosphonic acid, and 4‐(N‐methylacrylamidomethyl)benzylphosphonic acid have been prepared in good yields for use in dental adhesives. They have been fully characterized by ¹H‐NMR, ¹³C‐NMR, ³¹P ‐ NMR, and by HRMS. All monomers are hydrolytically stable in aqueous solution. Free radical homopolymerizations of these monomers have been carried out in solution of ethanol/water (2.5/1:v/v), using 2,2′‐azo(2‐methylpropionamidine) dihydrochloride (AMPAHC) as initiator. They lead to homopolymers in moderate to excellent yields. Structure of the polymers has been confirmed by SEC/MALLS and ¹H‐NMR spectra. The photopolymerization behavior of the synthesized monomers with N,N′‐diethyl‐1,3‐bis(acrylamido)propane has been investigated by DSC. New self‐etch primers, based on these acrylamide monomers, have been formulated. Dentin shear bond strength measurements have shown that primers based on (N‐methylacrylamido)alkylphosphonic acids assure a strong bond between the tooth substance and a dental composite. Moreover, the monomer with the longest spacer group provides the highest shear bond strength. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7074–7090, 2008     

Synthesis and characterization of new phosphorus and other heteroatom containing aryl cyanate ester monomers and networks

Several aromatic dicyanate monomers have been synthesized bearing para-linked strong electron withdrawing groups, such as phenylphosphine oxide, sulfone, and carbonyl. These groups increased the reactivity of the cyanate functional groups and eliminated the need for curing catalysts. However, an undesirable decrease in the processing window between the monomer melting point and the onset of cure was also generally observed. An arylene ether phenyl phosphine oxide system was designed that displayed several attractive characteristics such as a low softening point, a wide processing window, cure with no catalyst, high T_g and high char yield in air, suggesting that these new thermosets might show good fire resistance. The dicyanate ester monomers were synthesized in high yield by reacting various bisphenols with cyanogen bromide in the presence of triethylamine. The high reactivity of the cyanate functional groups required that the cyanation reaction be conducted at temperature below 0°C in order to prevent imidocarbonate side reactions. Proton NMR and FT-IR were used to characterize these monomers. The cyclotrimerization curing process was monitored by the disappearance of the carbon-nitrogen triple bond stretch (2270 cm⁻¹). An optimal cure schedule was determined and the cured polycyanurate networks were characterized by DSC, DMTA, and TGA. Tg values were typically > 250°C and 5% weight loss values were observed by TGA in air above 400°C. Several of the dicyanate monomers with sufficiently large processing windows were cured into single lap shear adhesive bonds onto titanium 6/4 and the measurements are reported herein. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 977–987, 1997     

Enzyme-promoted desymmetrisation of prochiral bis(cyanomethyl)phenylphosphine oxide

Prochiral bis(cyanomethyl)phenylphosphine oxide has been successfully transformed into the corresponding optically active monoamide and monoacid with enantiomeric excesses ranging from low (15%) to very high (up to 99%) using a broad spectrum of nitrile-hydrolysing enzymes.     

Effect of reaction conditions on the molecular weight and polydispersity of linear poly(arylene ether phosphine oxide)s prepared from an AB monomer

A thorough study of the polymerization behavior of 4‐fluoro‐4′‐hydroxytriphenyl‐phosphine oxide, 2 , under nucleophilic aromatic substitution reactions has been carried out. The synthesis of 2 was achieved in excellent yields by the reaction of bis(4‐fluorophenyl)phenylphosphine oxide, 1 , with one equivalent of potassium hydroxide in DMSO/water. The structure and purity of 2 were confirmed via ¹H, ¹³C, and ³¹P NMR spectroscopy along with elemental analysis. Polymerization reactions of 2 in NMP or DMSO at 180 °C provided the corresponding linear poly(arylene ether phosphine oxide)s, PAEPOs, with number average molecular weights, M_n, ranging from 11,700 to 36,500 Da. All of the polymer samples were completely soluble in chloroform, tetrahydrofuran, DMSO, NMP, and DMAc. The polymerization reactions were accompanied by a competing intramolecular process that resulted in the formation of cyclic oligomeric species that were removed via a final precipitation from methanol. Analysis using ³¹P NMR spectroscopy and size exclusion chromatography (SEC) confirmed that the majority of the lower molecular weight cyclic species were removed via this process. The polymer samples formed tough films when chloroform solutions were slowly evaporated on a glass slide. The PAEPO samples prepared in this study exhibited excellent thermal stability with T_d (5%) values between 503 and 542 in air while the glass transition temperatures ranged from 223 to 237 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2099–2106, 2006     

Synthesis of Aminomethylphosphines with Triazaadamantane Fragments

The reaction of (hydroxymethyl)diphenylphosphine with 7-amino-1,3,5-triazaadamantane, followed by ready oxidation of the initially formed aminomethylphosphine gave diphenyl[(1,3,5-triazaadamantan-7-yl)aminomethyl]phosphine oxide. The reactions of bis(hydroxymethyl)phenylphosphine with 2 mol of 7-amino-1,3,5-triazaadamantane in the absence and in the presence of Paraform provided bis[(1,3,5-triazaadamantan-7-yl)aminomethyl]phenylphosphine and 1,3-bis(1,3,5-triazaadamantan-7-yl)-5-phenyl-1,3,5-diazaphosphorinane, respectively.