Probing furanose ring conformation by gas-phase computational methods: energy profile and structural parameters in methyl beta-D-arabinofuranoside as a function of ring conformation

The potential energy surface of methyl beta-D-arabinofuranoside (3) has been studied by ab initio molecular orbital (HF/6-31G) and density functional theory (B3LYP/6-31G) calculations via minimization of the 10 possible envelope conformers. The partial potential energy surface identified that the global minimum and lowest energy northern conformer was E(2). In the HF calculations, (2)E was the most stable southern conformer, while the density functional theory methods identified (4)E as the local minimum in this hemisphere. Additional calculations at higher levels of theory showed that the B3LYP-derived energies of many of the envelope conformers of 3 are dependent upon the basis set used. It has also been demonstrated that B3LYP/6-31+G//B3LYP/6-31G single point energies are essentially the same as those obtained from full geometry optimizations at the B3LYP/6-31+G level. The northern and southern minima of the B3LYP/6-31+G surface are, respectively, the E(2) and (2)E conformers. The B3LYP/6-31G geometries were used to study the relationship between ring conformation and various structural parameters including bond angles, dihedral angles, bond lengths, and interatomic distances.     

New insights into an old reaction. High-resolution x-ray powder diffraction of Wiberg's aminoalane intermediate

In accordance with the procedure described by E. Wiberg, Me(3)Al-NH(3) was heated as a bulk material in inert atmosphere to give a colorless liquid which slowly loses methane. Close to the end of this elimination reaction, the melt crystallized to give a microcrystalline powder of (Me(2)AlNH(2))(x)(). The structure of this intermediate has been solved by the method of high-resolution X-ray powder diffraction. The compound crystallizes in the monoclinic space group C2/c with the cell parameters of a = 15.0047(6) A, b = 8.7500(2) A, c = 24.4702(8) A, and beta = 107.290(2) degrees, with eight trimers (Me(2)AlNH(2))(3) per unit cell. These trimers crystallize in a boat conformation in contrast to the known trimers of the same composition where a twist-boat conformation had been found by single crystal determination. Different conformers of (Me(2)AlNH(2))(3) have been investigated by theoretical methods (HF/6-31G(d), B3LYP/6-31G(d), B3LYP/6-311G(d,p), MP2(fc)/6-31G(d), and MP2(fc)/6-311G(d,p)). The twist-boat and the chair conformer correspond to minima at the potential energy surface, whereas the boat conformer corresponds to a first-order transition state (relative energies of 0.45-2.56 kJ/mol (boat) and 6.66-11.91 kJ/mol (chair)). Relaxed scans of the potential energy surface at the HF/6-31G(d) and B3LYP/6-31G(d) levels have shown that the boat conformer (C(s)() symmetry) connects two enantiomers of the twist-boat form (C(2) symmetry).     

A full conformational space analysis of bilirubin

Ab initio methods were utilized in a gas-phase systematic conformational search of bilirubin conformers. The whole molecule was divided into four fragments. Most stable conformers of them were employed to build 196 conformers of the complete bilirubin molecule. Initial geometries were optimized using HF/3-21G level of theory and the minimum energy conformers were then reoptimized at B3LYP/6-31G(d) level. Ridge-tile conformer was the most stable one, in perfect agreement with X-ray data. We found that while tetrapyrrole backbone shows some flexibility, propionic acid side chains have a greater influence in bilirubin conformation because they can interact through different hydrogen bond patterns with the backbone and between them.     

Quantum chemical calculations based on ONIOM and the DFT methods in the inclusion complex: doxycycline/2-O-Me-β-cyclodextrin

A computational study of inclusion complexes of 2-methyl-βCD with Doxycycline tautomeric (enol and keto form) has been performed with several combinations of ONIOM hybrid calculations. The reliability of the ONIOM2 calculations at the integrated level, ONIOM2 (M05-2X/6-31G(d): M05-2X/3-21G*), ONIOM2 (M05-2X/6-31G(d):HF/3-21G*), ONIOM2 (B3LYP/6-31G(d):HF/3-21G*), ONIOM2 (B3LYP/6-31G(d):B3LYP/3-21G*) and ONIOM2 (B3PW91/6-31G(d):B3PW91/3-21G*) was examined. Their complexation, binding, deformation and stabilization energies, and geometrical data were compared with those of the target geometry structure optimized at the M05-2X/6-31G(d) level of theory. Mixed combinations ONIOM2 (M05-2X 6-31G(d):HF 3-21G*) and ONIOM2 (B3LYP 6-31G(d):HF 3-21G*) reproduces nearly the target geometry structure and provides realistic energetic results at a relatively low computational cost.     

丙酮酸分子结构与振动光谱的密度泛函理论研究

用密度泛函方法BLYP、B3LYP和从头算Hartree-Fock(HF)方法在6-31G*基组水平上对丙酮酸分子的几何结构（甲基的重叠式和交错式两种构象）和振动光谱分别进行了优化和计算,并给出了各种频率所对应的红外强度及拉曼活性,对光谱进行了指认。结果表明：在丙酮酸分子的两种构象中,重叠式比较稳定*B3LYP计算得到的构型参数与实验结果比较一致;在振动频率的计算中,BLYP未标度力场所计算的非CH3伸缩振动基频预测值和实验值的平均绝对偏差为10.4cm-1;而HF标度力场的平均绝对偏差为17.9cm-1。说明两者的结果与实验观测频率比较吻合,但B3LYP的频率计算值偏差（38.3cm-1）较大。根据振动频率的势能分布和红外光谱强度对此分子的振动基频进行了理论归属。     

Structure and conformational stability of CH2CHCH2X (X=F, Cl and Br) molecules—post Hartree–Fock and density functional theory methods

The molecular structure and conformational stability of CH₂CHCH₂X (X=F, Cl and Br) molecules were studied using ab initio and density functional theory (DFT) methods. The molecular geometries of 3-fluoropropene were optimized employing BLYP and B3LYP levels of theory of DFT method implementing 6-311+G(d,p) basis set. The MP2/6-31G^*, BLYP and B3LYP levels of theory of ab initio and DFT methods were used to optimize the 3-chloropropene and 3-bromopropene molecules. The structural and physical parameters of the molecules are discussed with the available experimental values. The rotational potential energy surface of the above molecules were obtained at MP2/6-31G^* and B3LYP/6-311+G(d,p) levels of theory. The Fourier decomposition of the rotational potentials were analyzed. The HF/6-31G^* and MP2/6-31G^* levels of theory have predicted the cis conformer as the minimum energy structure for 3-fluoropropene, which is in agreement with the experimental values, whereas the BLYP/6-311+G(d,p) and B3LYP/6-311+G(d,p) levels of theory reverses the order of conformation. The ΔE values calculated for 3-chloropropene at MP2/6-31G^*, BLYP/6-311+G(d,p) and B3LYP/6-311+G(d,p) levels of theory show that the gauche form is more stable than the cis form, which is in agreement with the experimental value. The same levels of theory have also predicted that the gauche form is stable than cis for 3-bromopropene molecule. The maximum hardness principle has been able to predict the stable conformer of 3-fluoropropene at HF/6-31G^* level of theory, but the same level of theory reverses the conformational stability of 3-chloropropene and 3-bromopropene molecules and MP2/6-31G^* level of theory predicted the stable conformer correctly.     

Conformations of dimethoxymethane: matrix isolation infrared and ab initio studies

Conformations of dimethoxymethane (DMM) were studied using matrix isolation infrared spectroscopy. DMM was trapped in an argon matrix using an effusive source at 298, 388 and 430 K. Experiments were also done using a supersonic jet source to look for conformational cooling in the expansion process. As a result of these experiments, spectrally resolved infrared features of the ground and first higher energy conformer of DMM have been recorded, for the first time. The experimental studies were supported by ab initio computations performed at HF and B3LYP levels, using a 6-31++G** basis set. Computationally, four minima were identified corresponding to conformers with GG, TG, G+G- and TT structures. The computed frequencies at the B3LYP level were found to compare well with the experimental matrix isolation frequencies, leading to a definitive assignment of the infrared features of DMM, for the GG and TG conformers. At the B3LYP/6-31++G** level, the energy difference between the GG and TG conformers was computed to be 2.30 kcal mol(-1). The barrier for conformation interconversion, TG-->GG level was calculated to be 0.95 kcal mol(-1). This value is consistent with the experimental observation that the spectral features due to the TG conformer disappeared in the matrix on annealing.     

Molecular structure and conformational stability of allylisocyanate—post-Hartree–Fock and density functional theory studies

The molecular structure and conformational stability of allylisocyanate (CH₂CHCH₂NCO) molecule was studied using the ab initio and DFT methods. The geometries of possible conformers, C-gauche (δ=120°, θ=0°) (δ=C=C–C–N and θ=C–C–N=C) and C-cis N-trans (δ=0° and θ=180°) were optimized employing HF/6-31G^*, MP2/6-31G^* levels of theory of ab initio and BLYP, B3LYP, BPW91 and B3PW91 methods of DFT implementing the atomic basis set 6-311+G(d,p). The structural and physical parameters of the above conformers were discussed with the experimental and theoretical values of the related molecules, methylisocyanate and 3-fluoropropene. It has been found that the N=C=O bond angle is not linear as the experimental result for both the conformers and the theoretical bond angle is 173°. The rotational potential energy surfaces have been performed at the HF/6-31G^*, and MP2/6-31G^* levels of theory. The Fourier decomposition potentials were analysed at the HF/6-31G^*, and MP2/6-31G^* levels of theory. The HF/6-31G^* level of theory predicted that the C-gauche conformer is more stable than the C-cis N-trans conformer by 0.41 kJ/mol, but the MP2 and DFT methods predicted the C-cis N-trans conformer is found to be more stable than the C-gauche conformer. The calculated chemical hardness value at the HF/6-31G^* level of theory predicted the C-cis N-trans form is more stable than C-gauche form, whereas the chemical hardness value at the MP2/6-31G^* level of theory favours the slight preference towards the C-gauge conformer.     

A computational study of conformational interconversions in 1,4-dithiacyclohexane (1,4-dithiane)

Ab initio molecular orbital theory with the 6-31G(d), 6-31G(d,p), 6-31+G(d), 6-31+G(d,p), 6-31+G(2d,p), 6-311G(d), 6-311G(d,p), and 6-311+G(2d,p) basis sets and density functional theory (BLYP, B3LYP, B3P86, B3PW91) have been used to locate transition states involved in the conformational interconversions of 1,4-dithiacyclohexane (1,4-dithiane) and to calculate the geometry optimized structures, relative energies, enthalpies, entropies, and free energies of the chair and twist conformers. In the chair and 1,4-twist conformers the C-Hax and C-Heq bond lengths are equal at each carbon, which suggest an absence of stereoelectronic hyperconjugative interactions involving carbon-hydrogen bonds. The 1,4-boat transition state structure was 9.53 to 10.5 kcal/mol higher in energy than the chair conformer and 4.75 to 5.82 kcal/mol higher in energy than the 1,4-twist conformer. Intrinsic reaction coordinate (IRC) calculations showed that the 1,4-boat transition state structure was the energy maximum in the interconversion of the enantiomers of the 1,4-twist conformer. The energy difference between the chair conformer and the 1,4-twist conformer was 4.85 kcal/mol and the chair-1,4-twist free energy difference (deltaG degrees (c-t)) was 4.93 kcal/mol at 298.15 K. Intrinsic reaction coordinate (IRC) calculations connected the transition state between the chair conformer and the 1,4-twist conformer. This transition state is 11.7 kcal/mol higher in energy than the chair conformer. The effects of basis sets on the 1,4-dithiane calculations and the relative energies of saturated and unsaturated six-membered dithianes and dioxanes are also discussed.     

Density functional theory investigations on the conformational stability and vibrational spectra of the model compound of vitamin K

Becke 3-Lee–Yang–Parr density functional theory (DFT/B3LYP) using 6-31G(d) and 6-311G(d) basis sets and the scaled quantum mechanics (SQM) force field method are used to study molecular conformations and vibrational spectra of a model compound of vitamin K (VK). In this molecule, there are six conformers on the torsional potential energy map of the dihedral angles C₈C₁₄C₁₅C₁₆ () and C₇C₈C₁₄C₁₅ (β). It is shown that the VK_1 conformer ( = 237.7° and β = 274.2°) is the most stable form. For this lowest energy conformer, the harmonic force fields calculated by B3LYP/6-311G(d) and B3LYP/6-31G(d) methods are scaled with one scale factor of 0.9623 and a set of different scale factors transferred from the previous studies for the other similar molecules, respectively. The vibrational frequencies, IR intensities, and Raman activities are obtained for the lowest energy conformer. On the basis of B3LYP calculations, the normal mode analysis is performed to assign the vibrational fundamental frequencies according to the potential energy distributions. The computational frequencies are in good agreement with the observed results.     

Si~2Cl~6分子的内旋转能垒和振动基频的理论研究

用从头算方法HF/6-31G^*^*和密度函方法B3LYP/6-31G^*^*,对Si~2Cl~6分子的平衡几何构型进行优化,优化的结果与实验结果吻合得较好.并用上述两种不同的方法计算Si~2Cl~6分子的内旋转能垒,结果分别为8.786和6.694kJ/mol,其中DFT方法的计算结果与实验结果4.18kJ/mol吻合得较好.对Si~2Cl~6分子的振动基频进行计算.用HF/6-31G^*^*SQM力场所计算的频率理论值与实验值的平均误差为7.3cm^-^1,用B3LYP/6-31G^*^*未标度的力场所计算的频率理论值与实验值的平均误差为6.0cm^-^1.该密度泛函方法(B3LYP/~6-31G^*^*)的理论计算值比用HF/6-31G^*^*标度后的SQM力场计算的频率与实验值(除Si--Si键扭转振动基频之外的11条振动基频)吻合得更好.并给出了Si--Si键扭转振动基频的预测值。     

2,4,6-三甲氧基苯-1-O-D葡萄糖苷的核磁共振谱的理论研究

The 1H and 13C-NMR of 2,4,6-trimethoxyphenol-1-O-D-glucopyranoside(Compound 1) isolated from Celastrus angulatus (Celastraceae) was calculated theoretically at the both levels HF/6-311+G(2d,p)//B3LYP/6-31G(d) and HF/6-311+G(2d,p)//B3LYP/6-31G(d,p) using the GIAO (gauge-independent atomic orbital) method. Statistical error analysis for theoretically predicted δH and δC values versus those experimentally observed for compound 1 was discussed. The results show that the theoretically predicted δH and δC values of β conformer of compound 1 are more close to the experimentally observed values than α conformer, and the β conformer of compound 1 is more stable than α conformer according to molecular energy theoretically calculated. So compound 1 is assigned to be 2,4,6-trimethoxyphenol-1-O-β-D-glucopyranoside, which is in good consistence with the conclusion deduced by the anomeric proton signal (δH=4.80, J=7.3 Hz) experimentally observed.     

Theoretical calculation of the OH vibrational overtone spectra of 1,5-pentanediol and 1,6-hexanediol

It is well-known that intramolecular hydrogen bonding affects the relative energetics of conformers, as well as the OH stretching peak positions, intensities, and width. In this study we simulated the Δv(OH) = 3, 4 overtone spectra of 1,5-pentanediol (PeD) and 1,6-hexanediol (HD) using the peak positions, intensities, and width calculated from the B3LYP/6-31+G(d,p) method. Furthermore, room temperature free energy calculations were performed using B3LYP/6-31+G(d,p) MP2/6-31+G(d,p), and MP2/6-311++G(3df,3pd) to obtain the relative population of the conformers. From the calculation of 109 and 381 distinct conformers for PeD and HD, respectively, we find that for these long chain diols the intramolecular hydrogen bonded conformers are not the most dominant conformation at room temperature. This is in stark contrast with shorter chain diols such as ethylene glycol for which the hydrogen bonded conformer dominates the population at room temperature. On the other hand, we found that the correlation between the hydrogen bonded OH red shift versus the homogeneous width, Γ = 0.0155(Δω)(1.36), which was derived for shorter chain diols, is valid even for these longer chain diols. We also showed that the intramolecular hydrogen bonded OH initially decays through the CCOH torsion and COH bending mode no matter how long the alkanediol chain length is for 1,n-alkanediols for n up to 6.     

吡啶-BH~3相互作用复合物的理论研究

对吡啶-BH~3复合物分别用MP2/6-31+G^*和B3LYP/6-31+G^*进行理论计算以预测该复合物的构型及解离能，得到四种构型，在MP2优化构型基础上作CCSD/6-31+G^*单点能量计算以验证MP2与B3LYP结果的可靠性，然后用B3LYP作振动频率分析，计算了各构型的垂直电离势，最后用更大基组作单点能量计算和自然键轨道(NBO)分析。结果表明，N-B直接相连的构型最稳定，其解离能为141.50kJ/mol,MP2和B3LYP对N-H接近的构型结果相关较大，另外两种构型稳定性介于二者之间，解离能分别为15.18kJ/mol,14.06kJ/mol(MP2/6-31+G^*)。     

Comparison of Some Computational Methods for Geometry Optimisation of Phosphorus Acid Derivatives

Several economical methods for geometry optimization, that should be applicable to larger molecules, have been evaluated for 19 phosphorus acid derivatives. MP2/cc-pVDZ geometry optimizations are used as reference points and the geometries obtained from the other methods are evaluated with respect to deviations in bond lengths and angles, from the reference geometries. The geometry optimization methods are also compared to the much used B3LYP/6-31G(d) method. Single point energies obtained by subsequent EDF1/6-31+G(d) or B3LYP/6-31+G(d,p) calculations on the respective equilibrium geometries are also reported relative to the energies obtained from the reference geometries. The geometries from HF/MIDI! optimizations were closer to those of the references than the geometries of the HF/3-21G(d), HF/6-31G(d), and B3LYP/MIDI! optimizations. The EDF1/6-31+G(d) or B3LYP/6-31+G(d,p) single point energies obtained from the HF/3-21G(d), HF/6-31G(d), and B3LYP/MIDI! geometries gave a mean absolute deviation (MAD) from that of the reference geometries of 1.4-3.9 kcal mol m 1 . The HF/MIDI! geometries, however, gave EDF1/6-31+G(d) and B3LYP/6-31+G(d,p) energies with a MAD of only about 0.5 and 0.55 kcal mol m 1 respectively from the energies obtained with the reference geometries. Thus, use of HF/MIDI! for geometry optimization of phosphorus acids is a method that gives geometries of near-MP2 quality, resulting in a fair accuracy of energies in subsequent single point calculations, at a much lower computational cost other methods that give similar accuracies.     

Comparison of some representative density functional theory and wave function theory methods for the studies of amino acids

Energies of different conformers of 22 amino acid molecules and their protonated and deprotonated species were calculated by some density functional theory (DFT; SVWN, B3LYP, B3PW91, MPWB1K, BHandHLYP) and wave function theory (WFT; HF, MP2) methods with the 6-311++G(d,p) basis set to obtain the relative conformer energies, vertical electron detachment energies, deprotonation energies, and proton affinities. Taking the CCSD/6-311++G(d,p) results as the references, the performances of the tested DFT and WFT methods for amino acids with various intramolecular hydrogen bonds were determined. The BHandHLYP method was the best overall performer among the tested DFT methods, and its accuracy was even better than that of the more expensive MP2 method. The computational dependencies of the five DFT methods and the HF and MP2 methods on the basis sets were further examined with the 6-31G(d,p), 6-311++G(d,p), aug-cc-pVDZ, 6-311++G(2df,p), and aug-cc-pVTZ basis sets. The differences between the small and large basis set results have decreased quickly for the hybrid generalized gradient approximation (GGA) methods. The basis set convergence of the MP2 results has been, however, very slow. Considering both the cost and the accuracy, the BHandHLYP functional with the 6-311++G(d,p) basis set is the best choice for the amino acid systems that are rich in hydrogen bonds.     

Electronic structure and absorption spectra of supramolecular complexes of a fullerene crown ether with a π-extended TTF derivative

The present work is a theoretical investigation on supramolecular complexes of a fullerene crown ether (A and B isomers) with a derivative of π-extended tetrathiafulvalene (T). The geometry and the electronic structure of seven different conformers of the complex of dibenzo-18-crown-6 ether of fullero-N-methylpyrrolidine with a N-benzyl-N-(4-{[9,10-bis(1,3-dithiol-2-ylidene)-9,10-dihydroanthracen-2-yl]ethynyl}benzyl)ammonium cation were determined. We calculated the complexation energies and the absorption spectra, i.e., the lowest 50 excited electronic states of the complexes have been determined at the ground state optimum geometry. All calculations were carried out employing the density functional theory (DFT) and the time-dependent DFT, using the B3LYP, CAM-B3LYP, ωB97X-D, and M06-2X functionals in conjunction with the 6-31G(d,p) basis set. Various types of van der Waals interactions are observed in the complexes. Conformer complexation energies (CE) range from 2.54 to 2.14 eV in the gas phase and from 1.75 to 1.34 eV in CHCl(3) solvent at the ωB97X-D/6-31G(d,p)//M06-2X/6-31G(d,p) level of theory. There are three major features at about 390, 330, and 290 nm in the calculated absorption spectra of all the conformers. The major peaks correspond to T→T, T→T/F (electron density in both T and the fullerene F of B) and to T→F transitions, depending on the particular conformer. Other charge transfer T→F transitions are observed close to the T→T transition, indicating the possibility of photoinduced electron transfer in all these complexes.     

单嘧磺隆除草剂的晶体构象-活性构象转换的密度泛函理论研究

应用密度泛函理论在B3LYP/6-31G(d)水平上对新型除草剂单嘧磺隆绕脲桥部分两个C—N键的内旋转势能面进行计算, 然后对势能面上的驻点进行构型优化和过渡态搜索, 得到单嘧磺隆4种稳定构象和构象转换过程所涉及的8个过渡态结构. 研究结果表明, 单嘧磺隆晶体构象-活性构象转换过程中涉及4种稳定构象和8条转换途径, 脲桥部分NH基团与嘧啶环上N原子所形成的分子内氢键对于构象的稳定性及转换过程起着十分重要的作用. 应用极化连续介质溶剂模型(PCM)在B3LYP/6-31＋＋G(d, p)水平下进行溶剂化效应计算, 结果表明单嘧磺隆从晶体构象转换成活性构象主要是在水相中进行的.     

Density functional theory study on the structure and vibrational frequencies of glycylglycine

Eleven possible conformers of glycylglycine have been studied by using the BLYP, B3LYP methods of density functional theory and the HF method at the basis set of 6-311++G**. BLYP (using Becke's and Lee-Yang-Parr's correlation functionals), ab initio Hartree-Fock (HF) and hybrid DFT/HF B3LYP calculations have been carried out to study the structure and vibrational spectra of glycylglycine. Glycylglycine crystal structure has been determined by X-ray diffraction analysis. The title compound has been crystallizes in the orthorhombic space group C1, with Z=4. And the unit cell parameters are: a=8.1184(12)A, b=9.5542(14)A, c=7.8192(11)A and V=577.95(15)A(3). Molecular conformation calculations have got 11 possible conformers. In these possible conformers, the most stable one has been selected. The BLYP/6-311++G** and scaled HF/6-311++G** frequencies correspond well with available experimental assignments of the normal vibrational modes. Comparison of the observed fundamental vibrational frequencies of glycylglycine and calculated results by density functional B3LYP and Hartree-Fock (HF) methods indicates that B3LYP is superior to the scaled Hartree-Fock (HF) for molecular vibrational issues.