Direct electrochemistry and electrocatalysis of horseradish peroxidase immobilized in sol–gel-derived tin oxide/gelatin composite films

Horseradish peroxidase (HRP) was immobilized into a new type of sol–gel-derived nano-sized tin oxide/gelatin composite film (SnO₂ composite film) using a sol–gel film/enzyme/sol–gel film “sandwich” configuration. Direct electrochemistry and electrocatalysis of HRP incorporated into the composite films were investigated. HRP/SnO₂ composite film exhibited a pair of stable and quasi-reversible cyclic voltammetric peaks for the HRP Fe(III)/HRP Fe(II) redox couple with a formal potential of about −0.25 V (vs. SCE) in a pH 6.0 phosphate buffer solution. The electron transfer between the enzyme and the underlying electrode was greatly enhanced in the microenvironment with nano-SnO₂ particles and nanoporous structures. Morphologies and microstructures of the composite films and HRP/composite films were characterized with TEM, AFM. Electrochemical impedance spectroscopy (EIS) was also used to feature the HRP incorporated into composite films. FTIR and UV–Vis spectroscopy demonstrated that HRP in the composite film could retain its native secondary structure. With the advantages of organic–inorganic hybrid materials, the HRP/SnO₂ composite film modified electrode displayed good stability and electrocatalytic activity to the reduction of H₂O₂, The apparent Michaelis-Menten constant was estimated to be 0.345 mM, indicating a high affinity of HRP entrapped into the composite film toward H₂O₂.     

Direct electrochemistry and electrocatalysis of hemoglobin immobilized by methacrylic acid

The direct electrochemistry of hemoglobin (Hb) incorporated in methacrylic acid (MAA) film on a paraffin-impregnated graphite electrode (PIGE) was described. A pair of well-defined and quasi-reversible cyclic voltametric peaks are obtained. The formal potentials (E ^0′) linearly depend on the pH of solution, indicating that the electron transfer was proton-coupled. Ultraviolet-visible (UV-Vis) spectra showed that the secondary structure of Hb in the MAA film was similar to individual Hb. The immobilized Hb retained its biological activity well and exhibited a nice response to the reduction of both NO₂⁻, and H₂O₂, on the basis of which a new biosensor has been developed. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 9, pp. 1079–1086. The text was submitted by the authors in English.     

Direct electrochemistry and electrocatalysis of heme-protein based on N,N-dimethylformamide film electrode

The heme-protein including myoglobin (Mb), hemoglobin (Hb) and horseradish peroxidase (HRP) were immobilized on normal graphite electrode by using N,N-dimethylformamide (DMF). The proteins undergo direct electron-transfer reactions. The current is linearly dependent on the scan rate, indicating that the direct electrochemistry of heme-protein in that case is a surface-controlled electrode process. The E°s are linearly dependent on solution pH (redox-Bohr effect), indicating that the electron transfer was proton-coupled. Ultraviolet-visible (UV-vis) and reflection-absorption infrared (RAIR) spectra suggest that the conformation of proteins in the presence of DMF are little different from that proteins alone the conformation changes reversibly in the range of pH 3.0-10.0. The catalytic activity of proteins were examined by hydrogen peroxide and nitrite.     

Electrochemistry and Electrocatalysis of a Nafion/Nano‐CaCO3/Hb Film Modified Carbon Ionic Liquid Electrode Using BMIMPF6 as Binder

In this paper a room temperature ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) was used as binder for the construction of carbon ionic liquid electrode (CILE) and a new electrochemical biosensor was developed for determination of H₂O₂ by immobilization of hemoglobin (Hb) in the composite film of Nafion/nano‐CaCO₃ on the surface of CILE. The Hb modified electrode showed a pair of well‐defined, quasi‐reversible redox peaks with E_pa and E_pc as ?0.265 V and ?0.470 V (vs. SCE). The formal potential (E°′) was got by the midpoint of E_pa and E_pc as ?0.368 V, which was the characteristic of Hb Fe(III)/Fe(II) redox couples. The peak to peak separation was 205 mV in pH 7.0 Britton–Robinson (B–R) buffer solution at the scan rate of 100 mV/s. The direct electrochemistry of Hb in the film was carefully investigated and the electrochemical parameters of Hb on the modified electrode were calculated as α=0.487 and k_s=0.128 s^?1. The Nafion/nano‐CaCO₃/Hb film electrode showed good electrocatalysis to the reduction of H₂O₂ in the linear range from 8.0 to 240.0 μmol/L and the detection limit as 5.0 μmol/L (3σ). The apparent Michaelis–Menten constant (K_M^app) was estimated to be 65.7 μmol/L. UV‐vis absorption spectroscopy and FT‐IR spectroscopy showed that Hb in the Nafion/nano‐CaCO₃ composite film could retain its native structure.     

Electrochemical behavior of horseradish peroxidase on WS2 nanosheet‐modified electrode and electrocatalytic investigation

In this paper, a WS₂ nanosheet was modified on the surface of a carbon ionic liquid electrode (CILE), and horseradish peroxidase (HRP) was further fixed on the electrode with a Nafion film. Direct electrochemistry and bioelectrocatalysis of HRP incorporated on the modified electrode were investigated in detail. On Nafion/HRP/WS₂/CILE, a pair of well‐defined quasi‐reversible redox peaks appeared on the cyclic voltammogram, indicating that the presence of the WS₂ nanosheet on the electrode surface could provide a specific interface with large surface area for HRP and its direct electron transfer rate was greatly enhanced. The formal potential (E⁰) obtained was –0.179 V, which was the typical feature of heme Fe(III)/Fe(II) in HRP. The electron transfer coefficient (α) and the heterogeneous electron transfer rate constant (k_s) of HRP were calculated as 0.44 and 1.01 s^–1, respectively. This HRP‐modified electrode showed excellent electrocatalytic activity for the reduction of trichloroacetic acid and NaNO₂ with a wide linear range and low detection limit. Real samples were detected by this proposed method, indicating the successful fabrication of a new third‐generation electrochemical enzyme sensor utilizing the WS₂ nanosheet.     

Electrochemical investigations of the reaction mechanism and kinetics between NADH and riboflavin immobilised on amorphous zirconium phosphate

Electrochemical investigations of the reaction mechanism and kinetics between riboflavin immobilised on zirconium phosphate (ZPRib) in carbon paste and NADH showed results yielding reliable information about aspects on the mechanism of the electron transfer reaction between the flavin and NADH. The formal potential (E°′) of the adsorbed riboflavin was −220 mV versus SCE at pH 7.0. A shift about 250 mV towards a more positive potential compared with its value in solution was assigned to the interaction between the basic nitrogen of riboflavin and the acid groups of ZP. The invariance of the E°′ with the pH of the contacting solution and the effect of different buffer constituents were attributed to the protection effect of ZP over the riboflavin. The electrocatalytic oxidation of NADH at the electrode was investigated using cyclic voltammetry and rotating disk electrode methodology using a potential of −50 mV versus SCE. The heterogeneous electron transfer rate constant, k _obs, was 816 M⁻¹ s⁻¹ and the Michaelis-Menten constant, K _M, was 1.8 mM (confirming a charge transfer complex intermediate in the reaction) for an electrode with a riboflavin coverage of 6.8 × 10⁻¹⁰ mol cm⁻². This drastic increase in the reaction rate between NADH and the immobilised riboflavin was assigned to the shift of the E°′. A surprising effect with addition of calcium or magnesium ion to the solution was also observed. The E°′ was shifted to −150 mV versus SCE and the reaction rate for NADH oxidation increased drastically. Received: 22 February 1999 / Accepted: 10 March 1999     

Direct electron transfer of Mb on chitosan/single-wall carbon nanotubes film modified Au electrode and its interaction with cimetidine

Three methods were used to immobilize myoglobin (Mb) on chitosan/single-wall carbon nanotubes (SWNTs) film, and direct electrochemistry of the immobilized Mb was extensively investigated. Immobilized Mb displayed a couple of stable and well-defined redox peaks with the formal potential (E’) is at about −0.27 V (vs. SCE) in 0.1 M phosphate buffer solution (pH 7.0). The E′ was shifted linearly with pH in the range of 3.0 to 9.0 with a slope of −54.1 mV pH⁻¹, denoting that one-electron accompanies with one-proton transfer in electrode reaction process. The FT-IR spectroscopy and UV-vis spectroscopy showed that Mb on the film retained its secondary structure similar to its native state. The experimental results demonstrated that the immobilized Mb exhibited excellent electrocatalytic activity to reduction of cimetidine with a significant lowering of overpotential. The electrocatalytic current was proportional to the concentration of cimetidine over the range from 9.80 × 10⁻⁶ to 1.1 × 10⁻⁴ M; the detection limit is 8.40 × 10⁻⁶ M (signal-to-noise ratio of 3). The proposed method exhibits good sensitivity, stability and reproducibility. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 2, pp. 235–243. The text was submitted by the authors in English     

Direct Electron Transfer of Horseradish Peroxidase in Gellan Gum–Hydrophilic Ionic Liquid Gel Film

A new composite film of microbial exocellular polysaccharide‐gellan gum (GG) and hydrophilic room temperature ionic liquid 1‐butyl‐3‐methyl‐imidazolium tetrafluoroborate (BMIMBF₄) was firstly used as an immobilization matrix to entrap horseradish peroxidase (HRP), and its properties were studied by UV/vis spectroscopy, cyclic voltammetry and electrochemical impedance spectroscopy. The results showed that BMIMBF₄ could promote the electron transfer between HRP and electrode surface, and the existence of GG could successfully immobilize BMIMBF₄ on the electrode surface with improved stability. HRP–BMIMBF₄–GG/GCE exhibited a pair of well‐defined and quasireversible cyclic voltammetric peaks in 0.1 M pH 7.0 phosphate buffer solutions at 1.8 V/s, which was the characteristic of HRP Fe(III)/Fe(II) redox couples. The formal potentials (E°′) was ?0.368 V (vs. SCE) and the peak‐to‐peak potential separation (ΔE_P) was 0.058 V. The peak currents were five times as large as those of HRP–GG/GCE. The average surface coverage (Γ*) and the apparent Michaelis‐Menten constant (K_m) were 4.5×10^?9 mol/cm² and 0.67 μM, respectively. The electron transfer rate constant was estimated to be 15.8 s^?1. The proposed electrode showed excellent electrocatalytic activity towards hydrogen peroxide (H₂O₂). The linear dynamic range for the detection of H₂O₂ was 0.05–0.5 μM with a correlation coefficient of 0.9945 and the detection limit was estimated at about 0.02 μM (S/N=3). BMIMBF₄–GG composite film was promising to immobilize other redox enzymes or proteins and attain their direct electrochemistry.     

Direct Electrochemistry and Electrocatalysis of Hemoglobin Based on Nafion‐Room Temperature Ionic Liquids‐Multiwalled Carbon Nanotubes Composite Film

A robust and effective composite film combined the benefits of Nafion, room temperature ionic liquid (RTIL) and multi‐wall carbon nanotubes (MWNTs) was prepared. Hemoglobin (Hb) was successfully immobilized on glassy carbon electrode surface by entrapping in the composite film. Direct electrochemistry and electrocatalysis of immobilized Hb were investigated in detail. A pair of well‐defined and quasi‐reversible redox peaks of Hb was obtained in 0.10 mol·L^?1 pH 7.0 phosphate buffer solution (PBS), indicating that the Nafion‐RTIL‐MWNTs film showed an obvious promotion for the direct electron transfer between Hb and the underlying electrode. The immobilized Hb exhibited an excellent electrocatalytic activity towards the reduction of H₂O₂. The catalysis current was linear to H₂O₂ concentration in the range of 2.0×10^?6 to 2.5×10^?4 mol·L^?1, with a detection limit of 8.0×10^?7 mol·L^?1 (S/N=3). The apparent Michaelis‐Menten constant (K_m^app) was calculated to be 0.34 mmol·L^?1. Moreover, the modified electrode displayed a good stability and reproducibility. Based on the composite film, a third‐generation reagentless biosensor could be constructed for the determination of H₂O₂.     

魔芋多糖固定化肌红蛋白的直接电化学与电催化

用魔芋多糖(KGM)和N,N-二甲基甲酰胺(DMF)的加合物,将肌红蛋白(Mb)固定在玻碳电极(GCE)上,制备了稳定的Mb-KGM-DMF/GCE修饰电极,并研究了Mb在修饰电极上的直接电化学行为和电催化性能。该电极在pH=7.0的磷酸盐缓冲溶液(PBS)中,-0.38 V(E0′)处有一对氧化还原峰,峰电位差ΔEp=70 mV,该峰正是Mb中血红素辅基FeⅢ/FeⅡ电对的氧化还原特征峰。在0.2~9.0 V/s扫速的范围内,氧化还原峰峰电流大小和扫描速率成正比,呈现出表面控制行为。在pH为5.0~12.0的范围内,式电位和pH值呈线性关系,表明电子传递过程伴随着质子转移。同时,Mb-KGM-DMF/GCE修饰电极表现出良好的电催化性能,对氧、H2O2有显著的催化作用。在4.70~75.0μmol/L的范围内,其催化峰电流大小与H2O2的浓度有良好的线性关系,其线性回归方程i=0.127 0.093C,r=0.9989,表观米氏常数为80.8μmol/L。     

Immobilization of flavine adenine dinucleotide onto nickel oxide nanostructures modified glassy carbon electrode: fabrication of highly sensitive persulfate sensor

A simple method was used to fabricate flavin adenine dinucleotide (FAD)/NiOx nanocomposite on the surface of glassy carbon (GC) electrode. Cyclic voltammetry technique was applied for deposition nickel oxide nanostructures onto GC surface. Owing to its high biocompatibility and large surface area of nickel oxide nanomaterials with immersing the GC/NiOx-modified electrode into FAD solution for a short period of time, 10–140 s, a stable thin layer of the FAD molecules immobilized onto electrode surface. The FAD/NiOx films exhibited a pair of well-defined, stable, and nearly reversible CV peaks at wide pH range (2–10). The formal potential of adsorbed FAD onto nickel oxide nanoparticles film, E ^o′ vs. Ag/AgCl reference electrode is −0.44 V in pH 7 buffer solutions was similar to dissolved FAD and changed linearly with a slope of 58.6 mV/pH in the pH range 2–10. The surface coverage and heterogeneous electron transfer rate constant (k _s ) of FAD immobilized on NiOx film glassy carbon electrode are 4.66 × 10⁻¹¹ mol cm⁻² and 63 ± 0.1 s⁻¹, indicating the high loading ability of the nickel oxide nanoparticles and great facilitation of the electron transfer between FAD and nickel oxide nanoparticles. FAD/NiOx nanocomposite-modified GC electrode shows excellent electrocatalytic activity toward S₂O₈²⁻ reduction at reduced overpotential. Furthermore, rotated modified electrode illustrates good analytical performance for amperometric detection of S₂O₈²⁻. Under optimized condition, the concentration calibration range, detection limit, and sensitivity were 3 μM–1.5 mM, 0.38 μM and 16.6 nA/μM, respectively.     

Direct electron transfer of cytochrome C and its electrocatalytic properties on multiwalled carbon nanotubes/ciprofloxacin films

In this study, stable and homogenous thin films of multiwalled carbon nanotubes (MWCNTs) were obtained on conducting surface using ciprofloxacin (CF, fluoroquinolone antibiotic) as an effective-dispersing agent. Further, MWCNTs/CF film modified electrodes (glassy carbon and indium tin oxide-coated glass electrode) are used successfully to study the direct electrochemistry of proteins. Here, cytochrome C (Cyt-C) was used as a model protein for investigation. A MWCNTs/CF film modified electrode was used as a biocompatible material for immobilization of Cyt-C from a neutral buffer solution (pH 7.2) using cyclic voltammetry (CV). Interestingly, Cyt-C retained its native state on the MWCNTs/CF film. The Cyt-C adsorbed MWCNTs/CF film was characterized by scanning electron microscopy (SEM), UV–visible spectrophotometry (UV-vis) and CV. SEM images showed the evidence for the adsorption of Cyt-C on the MWCNTs/CF film, and UV–vis spectrum confirmed that Cyt-C was in its native state on MWCNTs/CF film. Using CV, it was found that the electrochemical signal of Cyt-C was highly stable in the neutral buffer solution and its redox peak potential was pH dependent. The formal potential (−0.27 V) and electron transfer rate constant (13 ± 1 s⁻¹) were calculated for Cyt-C on MWCNTs/CF film modified electrode. A potential application of the Cyt-C/MWCNTs/CF electrode as a biosensor to monitor H₂O₂ has been investigated. The steady-state current response increases linearly with H₂O₂ concentration from 2 × 10⁻⁶ to 7.8 × 10⁻⁵ M. The detection limit for determination of H₂O₂ has been found to be 1.0 × 10⁻⁶ M (S/N = 3). Thus, Cyt-C/MWCNTs/CF film modified electrode can be used as a biosensing material for sensor applications.     

Nafion/tetraruthenated porphyrin glassy carbon-modified electrode: characterization and voltammetric studies of sulfite oxidation in water–ethanol solutions

In this work, the modification of a glassy carbon electrode with tetraruthenated porphyrins electrostatically assembled onto a Nafion film, previously adsorbed on the electrode surface, is reported. This modified electrode was characterized by scanning electron microscopy–energy-dispersive X-ray, Raman spectroscopy, UV-Vis spectroelectrochemistry, and cyclic voltammetry. The Nafion film onto the glassy carbon electrode shows a smooth disposition; when the tetraruthenated porphyrin is incorporated on the Nafion film, the complex is adsorbed in a homogeneous way. The modified electrode catalyzes HSO₃⁻ oxidation in water–ethanol solutions and shows an enhanced stability compared with the electrode modified with the dip coating method. Rotating disk electrode experiments showed a kinetic limitation to the electron transfer controlled by charge propagation in the film. I/E curves show a Tafel slope of 120 mV/decade corresponding to a first electron-transfer reaction, depending on the potential, as the determining step. Spectroelectrochemical experiments demonstrated that Ru(II) is the active site for the electrocatalysis.     

Direct electron transfer of hemoglobin on dihexadecyl hydrogen phosphate/single-wall carbon nanotubes film modified Au electrode and its interaction with taxol

Direct electrochemistry of hemoglobin (Hb) immobilized on the dihexadecyl hydrogen phosphate (DHP)/single-wall carbon nanotubes (SWNTs) film modified Au electrode is investigated. The immobilized Hb displays a couple of stable and well-defined redox peaks, whose formal potential (E ⁰) is −0.434 V (SCE) in a phosphate buffer solution of pH 7.0. The formal potential of the heme Fe(III)/Fe(II) couple shifts negatively linearly with increased pH with a slope of −42.3 mV/pH, denoting that one electron transfer accompanies single proton transportation. Both SWNTs and DHP can accelerate the electron transfer between Hb and the electrode. Using DHP/Hb/SWNTs-film-modified Au electrode, the interaction between Hb and taxol is investigated. The voltammetric response of Hb decreases with increasing concentration of taxol. The peak currents decreases proportionally to the taxol concentration at 1.4 × 10⁻⁵ to 1.3 × 10⁻⁴ M, the linear regression equation being Δi (A) = 2.9603 − 0.4225 c_taxol (M), with a correlation coefficient (r) 0.9985, and the detection limit 6.95 × 10⁻⁶ M (signal-to-noise ratio of three). Published in Russian in Elektrokhimiya, 2007, Vol. 43, No. 7, pp. 801–807. The text was submitted by the authors in English.     

Hydrogen Peroxide Biosensor Based on the Electrochemistry of the Myoglobin‐TATP Composite Film

Abstract

Direct electrochemistry of the myoglobin‐triacetone triperoxide (Mb‐TATP) composite on carbon paste (CP) electrode is reported. This electrode gives a well‐defined and quasi‐reversible cyclic voltammogram for the Mb Fe^III/Fe^II redox coupled with the formal potential (E?′) of ?0.302 V (vs. Ag/AgCl) in pH 6.92 phosphate buffer. Electronic and vibrational spectroscopies show that the Mb in the composite retains a structure similar to its native form. The enzymatic reactivity to the reduction of H₂O₂ has been studied for the Mb‐TATP film. The analytical performances have been obtained with the linear range of 78.32–1135.64 µM, the detection limit of 55 µM (S/N=3), and the apparent Michaelis‐Menten constant (K _m) of 662.8 µM. This H₂O₂ biosensor based on the electrocatalysis of the immobilized Mb presents a higher stability within two weeks.     

Direct electron transfer of cytochrome c and its biosensor based on gold nanoparticles/room temperature ionic liquid/carbon nanotubes composite film

A robust and effective composite film based on gold nanoparticles (GNPs)/room temperature ionic liquid (RTIL)/multi-wall carbon nanotubes (MWNTs) modified glassy carbon (GC) electrode was prepared by a layer-by-layer self-assembly technique. Cytochrome c (Cyt c) was successfully immobilized on the RTIL-nanohybrid film modified GC electrode by electrostatic adsorption. Direct electrochemistry and electrocatalysis of Cyt c were investigated. The results suggested that Cyt c could be tightly adsorbed on the modified electrode. A pair of well-defined quasi-reversible redox peaks of Cyt c was obtained in 0.10 M, pH 7.0 phosphate buffer solution (PBS). RTIL-nanohybrid film showed an obvious promotion for the direct electron transfer between Cyt c and the underlying electrode. The immobilized Cyt c exhibited an excellent electrocatalytic activity towards the reduction of H₂O₂. The catalysis currents increased linearly to the H₂O₂ concentration in a wide range of 5.0 × 10⁻⁵– 1.15 × 10⁻³ M. Based on the multilayer film, the third-generation biosensor could be constructed for the determination of H₂O₂.     

Direct electrochemistry and electrocatalysis of hemoglobin on chitosan-room temperature ionic liquid-TiO(2)-graphene nanocomposite film modified electrode

TiO₂-graphene nanocomposite was prepared by hydrolysis of titanium isopropoxide in colloidal suspension of graphene oxide and in situ hydrothermal treatment. The direct electrochemistry and electrocatalysis of hemoglobin in room temperature ionic liquid 1-Butyl-3-methylimidazolium hexafluorophosphate, chitosan and TiO₂-graphene nanocomposite modified glassy carbon electrode were investigated. The biosensor was examined by using UV-vis spectroscopy, scanning electron microscopy and electrochemical methods. The results indicated that hemoglobin remained its bioactivity on the modified electrode, showing a couple of well-defined and quasi-reversible redox peaks, corresponding to hemoglobin Fe^III/Fe^II couple. The kinetic parameters for the electrode reaction, such as the formal potential (E^o'), the electron transfer rate constant (k_s), the apparent coverage (Γ), and Michaelis–Menten constant (K_m) were evaluated. The biosensor showed good electrochemical responses to the reduction of H₂O₂ in the ranges of 1–1170 μM. The detection limit was 0.3 μM (S/N = 3). The properties of this composite film, together with the bioelectrochemical catalytic activity, could make them useful in the development of bioelectronic devices, and investigation of electrochemistry of other heme proteins at functional interface.     

Heme protein-gluten films: voltammetric studies and their electrocatalytic properties

Direct electrochemistry and electrocatalysis of heme proteins, such as hemoglobin (Hb), myoglobin (Mb), and horseradish peroxidase (HRP), incorporated in gluten biopolymer films cast on pyrolytic graphite (PG) electrodes, were studied by voltammetry and amperometry. All the three protein-gluten films exhibited a pair of well-defined, quasi-reversible cyclic voltammetric peaks at about −0.28 V versus saturated calomel electrode (SCE) in pH 5.5 buffers, respectively, characteristic of the heme Fe(III)/Fe(II) redox couples, indicating enhanced electron transfer between the proteins and PG electrodes in a gluten film environment. The protein-gluten hydrogel films showed excellent stability. Positions of Soret absorption band of protein-gluten films suggested that the heme proteins kept their secondary structure similar to their native state in the films in the medium pH range. The heme proteins in gluten films were act as a biologic catalyst to catalyze reduction of oxygen or hydrogen peroxide. The voltammetric or amperometric responses of H₂O₂ at the protein-gluten film electrodes could be used to determine the concentration of H₂O₂ in solution.     

Hemoglobin Modified Carbon Paste Electrode: Direct Electrochemistry and Electrocatalysis

Abstract

A new hemoglobin (Hb) modified carbon paste (CP) electrode was fabricated by simply mixing the hemoglobin with carbon powder and paraffin homogeneously. To prevent the leakage of Hb from the electrode surface, a Nafion film was further applied on the surface of Hb-carbon composite paste electrode. Direct electrochemistry of hemoglobin in the paste electrode was easily achieved, and a pair of well-defined quasi-reversible redox peak of heme Fe(III)/Fe(II) couple appeared with the formal potential (E^0′) as ?0.335 V (vs. Saturated calomel electrode; CE) in pH 7.0 phosphate buffer solution (PBS). The fabricated Hb modified electrode showed good electrocatalytic ability to the reduction of trichloroacetic acid (TCA) and H₂O₂.