Shielding effect and emission condition of a screw dislocation near a blunt crack in elliptical inhomogeneity

The shielding effect and emission condition of a screw dislocation near a blunt crack in elastic elliptical inhomogeneity is dealt with. Utilizing the Muskhelishvili complex variable method, the explicit series form solutions of the complex potentials in the matrix and the inclusion regions are derived. The stress intensity factor and critical stress intensity factor for dislocation emission are also calculated. The influences of the orientation of the dislocation and morphology of the blunt crack as well as the material elastic dissimilarity upon the shielding effect and emission criterion are discussed in detail. As a result, numerical analysis and discussion show that the positive screw dislocation can reduce the stress intensity factor of the crack tip (shielding effect) only when it is located in the certain region. The shielding effect increases with the increase of the shear modulus of the matrix and the curvature radius of the blunt crack tip, but decreases with the increase of dislocation azimuth angle. The critical loads at infinity for dislocation emission increases with the increment of the emission angle and the curvature radius of the blunt crack tip, and the most probable angle for screw dislocation emission is zero. The present solutions contain previous results as the special cases.     

INTERACTION OF A DISLOCATION DIPOLE WITH A MODE III INTERFACE CRACK

Interaction between a screw dislocation dipole and a mode III interface crack is investigated. By using the complex variable method, the closed form solutions for complex potentials are obtained when a screw dislocation dipole lies inside a medium. The stress fields and the stress intensity factors at the tip of the interface crack produced by the screw dislocation dipole are given. The influence of the orientation, the dipole arm and the location of the screw dislocation dipole as well as the material mismatch on the stress intensity factors is discussed. The image force and the image torque acting on the screw dislocation dipole center are also calculated. The mechanical equilibrium position of the screw dislocation dipole is examined for various material property combinations and crack geometries. The results indicate that the shielding or anti-shielding effect on the stress intensity factor increases abruptly when the dislocation dipole approaches the tip of the crack. Additionally, the disturbation of the interface crack on the motion of the dislocation dipole is also significant.     

ANALYSIS OF A SCREW DISLOCATION INSIDE A CIRCULAR INCLUSION WITH INTERFACIAL CRACKS IN PIEZOELECTRIC COMPOSITES

IntroductionPiezoelectric materials have potentials for use in many modern devices and compositestructures. The presence of various defects, such as inclusions, holes, dislocations andcracks, can greatly influence their characteristics and coupled behavio…     

INTERACTION OF A DISLOCATION DIPOLE WITH A MODE Ⅲ INTERFACE CRACK

Interaction between a screw dislocation dipole and a mode Ⅲ interface crack is investigated. By using the complex variable method, the closed form solutions for complex potentials are obtained when a screw dislocation dipole lies inside a medium. The stress fields and the stress intensity factors at the tip of the interface crack produced by the screw dislocation dipole are given. The influence of the orientation, the dipole arm and the location of the screw dislocation dipole as well as the material mismatch on the stress intensity factors is discussed. zThe image force and the image torque acting on the screw dislocation dipole center are also calculated. The mechanical equilibrium position of the screw dislocation dipole is examined for various material property combinations and crack geometries. The results indicate that the shielding or anti-shielding effect on the stress intensity factor increases abruptly when the dislocation dipole approaches the tip of the crack. Additionally, the disturbation of the interface crack on the motion of the dislocation dipole is also significant.     

位错偶极子和Ⅲ型界面裂纹的干涉效应

研究了多晶体材料中螺型位错偶极子和界面裂纹的弹性干涉作用.利用复变函数方法,得到了该问题复势函数的封闭形式解答.求出了由位错偶极子诱导的应力场和裂纹尖端应力强度应子,分析了偶极子的方向,偶臂和位置以及材料失配对应力强度因子的影响.推导了作用在螺型位错偶极子中心的像力和力偶矩,并讨论了界面裂纹几何条件和不同材料特征组合对位错偶极子平衡位置的影响规律.结果表明,裂纹尖端的螺型位错偶极子对应力强度因子会产生强烈的屏蔽或反屏蔽效应.同时,界面裂纹对螺型位错偶极子在材料中运动有很强的扰动作用.     

压电双材料界面钝裂纹附近螺型位错的屏蔽效应与发射条件

研究了压电双材料界面钝裂纹附近螺型位错的屏蔽效应与发射条件.应用保角变换技术,得到了复势函数与应力场的封闭形式解,讨论了位错方位、双材料电弹常数及裂纹钝化程度对位错屏蔽效应和发射条件的影响.结果表明,Burgers矢量为正的螺型位错可以降低界面钝裂纹尖端的应力强度因子(屏蔽效应),屏蔽效应随位错方位角及位错与裂纹尖端距...     

Exact solutions for piezoelectric screw dislocations near two asymmetrical edge cracks emanating from an elliptical hole

The interaction between piezoelectric screw dislocations and two asymmetrical interfacial cracks emanating from an elliptic hole under combined mechanical and electric load at infinity is dealt with. The closed-form solutions are derived for complex potentials and generalized stress fields. In the limiting cases, some well-known results can be obtained from the present solutions. Moreover, some new exact solutions are shown. The stress intensity factor and the energy release rate at the right tip due to a screw dislocation near the right interfacial crack are also calculated. The results show that the shielding effect of dislocation on crack expanding decreases with the increase in dislocation azimuth angle and the distance between the dislocation and the crack tip, and the repulsion acting on the dislocation from the other half plane demotes crack propagation. The increasing of the length of the other crack promotes crack growth, but the increasing of the minor semi-axis demotes it.     

穿透夹杂界面的半无限楔形裂纹尖端螺型位错的发射研究

摘要：研究了穿透圆形夹杂界面的半无限楔形裂纹与裂纹尖端螺型位错的干涉问题。应用复变函数解析延拓技术与奇性主部分析方法,得到了位错位于半圆形夹杂内部时,半无限基体和半圆形夹杂内复势函数的解析解。然后利用保角映射技术得到了穿透圆形夹杂界面的半无限楔形裂纹尖端螺型位错产生的应力场以及作用在位错上的位错力的解析表达式。主要讨论了螺型位错对裂纹的屏蔽效应以及从楔形裂纹尖端发射位错的临界载荷条件。研究结果表明正的螺型位错可以削弱楔形裂纹尖端的应力强度因子,屏蔽裂纹的扩展,屏蔽效应随位错方位角的增大而减小。位错发射所需的无穷远临界应力随发射角的增加而增大,最可能的位错发射角度为零度,直线裂纹尖端位错的发射比楔形裂纹尖端位错的发射更容易,硬基体抑制位错的发射。     

压电螺位错与含界面裂纹圆形涂层夹杂的干涉

研究位于基体或夹杂中任意点的压电螺型位错与含界面裂纹圆形涂层夹杂的电弹耦合干 涉问题. 运用复变函数方法，获得了基体，涂层和夹杂中复势函数的一般解答. 典型例 子给出了界面含有一条裂纹时，复势函数的精确级数形式解. 基于已获得的复势函数和广 义Peach-Koehler公式，计算了作用在位错上的像力. 讨论了裂纹几何条件，涂层厚度和材 料特性对位错平衡位置的影响规律. 结果表明，界面裂纹对涂层夹杂附近的位错运动有很大 的影响效应，含界面裂纹涂层夹杂对位错的捕获能力强于完整粘结情况；并发现界面裂纹长 度和涂层材料常数达到某一个临界值时可以改变像力的方向. 解答的特殊情形包含了以 往文献的几个结果.     

增强相/夹杂内螺位错偶极子与含共焦钝裂纹椭圆夹杂的干涉效应

运用弹性力学的复势方法,研究了纵向剪切下增强相/夹杂内螺型位错偶极子与含共焦钝裂纹椭圆夹杂的干涉效应,得到了该问题复势函数的封闭形式解答,由此推导出了夹杂区域的应力场、作用在螺型位错偶极子中心的像力和像力偶矩以及裂纹尖端应力强度因子级数形式解。并分析了位错偶极子倾角 、钝裂纹尺寸和材料常数对位错像力、像力偶矩以及应力强度因子的影响。数值计算结果表明：位错像力、像力偶矩以及应力强度因子均随位错偶极子倾角做周期变化;夹杂内部的椭圆钝裂纹明显增强了硬基体对位错的排斥,减弱了软基体对位错的吸引,且对于硬夹杂,位错出现了一个不稳定平衡位置,该平衡位置随钝裂纹曲率的增大不断向界面靠近;变化 值将出现改变位错偶极子对应力强度因子作用方向的临界值。     

Interaction of a screw dislocation with an interfacial edge crack in a two-phase piezoelectric material

The interaction of a screw dislocation with an interfacial edge crack in a two-phase piezoelectric medium is investigated. Closed-form solutions of the elastic and electrical fields induced by the screw dislocation are derived using the conformal mapping method in conjunction with the image principle. Based on the electroelastic fields derived, the stress and electric displacement intensity factors, the image force acting on the dislocation are given explicitly. We find that the stress and electric displacement intensity factors depend on the effective electroelastic material constants. In the case where one of two phases is purely elastic, the stress intensity factor and image force are plotted to illustrate the influences of electromechanical coupling effect, the position of the dislocation and the material properties on the interaction mechanism. The project supported by the Doctoral Foundation of Hebei Province (B2003113)     

Electro-elastic interaction between a piezoelectric screw dislocation and circular interfacial rigid lines

The electro-elastic interaction between a piezoelectric screw dislocation located either outside or inside inhomogeneity and circular interfacial rigid lines under anti-plane mechanical and in-plane electrical loads in linear piezoelectric materials is dealt with in the framework of linear elastic theory. Using Riemann–Schwarz’s symmetry principle integrated with the analysis of singularity of complex functions, the general solution of this problem is presented in this paper. For a special example, the closed form solutions for electro-elastic fields in matrix and inhomogeneity regions are derived explicitly when interface containing single rigid line. Applying perturbation technique, perturbation stress and electric displacement fields are obtained. The image force acting on piezoelectric screw dislocation is calculated by using the generalized Peach–Koehler formula. As a result, numerical analysis and discussion show that soft inhomogeneity can repel screw dislocation in piezoelectric material due to their intrinsic electro-mechanical coupling behavior and the influence of interfacial rigid line upon the image force is profound. When the radian of circular rigid line reaches extensive magnitude, the presence of interfacial rigid line can change the interaction mechanism.     

螺型位错偶极子与界面钝裂纹的干涉效应

研究了螺型位错偶极子与界面钝裂纹的干涉效应.应用保角变换技术,得到了复势函数与应力场的封闭解析解,讨论了位错偶极子方位、臂长及裂纹钝化程度对位错偶板子屏蔽效应和发射条件的影响.结果表明,与单个螺型位错不同,螺型位错偶极子与x轴夹角在一定范围内时才可以降低界面钝裂纹尖端的应力强度因子(屏蔽效应),屏蔽效应随偶板子臂长的增大而增强,随裂纹钝化程度的增大而增强,屏蔽区域也随裂纹钝化程度的增大而增大;位错偶极子发射所需的临界无穷远加载随偶极子臂长的增加而减小,随位错方位角及裂纹钝化程度的增加而增大;最可能的位错偶极子发射角度为0.螺型位错偶极子的发射比单个螺型位错的发射要困难.本文解答的特殊情况与相关文献给出的解答一致.     

压电螺型位错和共线界面刚性线夹杂的干涉效应

研究了压电材料中压电螺型位错和共线界面导电刚性线夹杂的电弹干涉效应．运用复变函数解析延拓技术与奇性主部分析方法,获得了该问题的一般解答．作为算例,求出了界面含一条刚性线夹杂时两种压电介质区域广义应力函数的封闭形式解．导出了作用在位错上的像力和刚性线夹杂表面剪应力和电位移的解析表达式．讨论了界面刚性线长度,两种材料的剪切模量比和压电系数比对位错力和刚性线表面剪应力的影响规律．为进一步研究该类问题提供了一个基本解。     

Electroelastic interaction between a piezoelectric screw dislocation and a confocal elliptic blunt crack with elliptical inhomogeneity

The electroelastic interaction between a piezoelectric screw dislocation and an elliptical inhomogeneity containing a confocal blunt crack under infinite longitudinal shear and in-plane electric field is investigated. Using the sectionally holomorphic function theory, Cauchy singular integral, singularity analysis of complex functions and theory of Rieman boundary problem, the explicit series solution of stress field is obtained when the screw dislocation is located in inhomogeneity. The intervention law of the interaction between blunt crack and screw dislocation in inhomogeneity is discussed. The analytical expressions of generalized stress and strain field of inhomogeneity are calculated, while the image force, field intensity factors of blunt crack are also presented. Moreover, a new matrix expression of the energy release rate and generalized strain energy density (SED) are deduced. With the size variation of blunt crack, the results can be reduced to the case of the interaction between a piezoelectric screw dislocation and a line crack in inhomogeneity. Numerical analysis are then conducted to reveal the effects of the dislocation location, the size of inhomogeneity and blunt crack and the applied load on the image force, energy release rate and strain energy density. The influence of dislocation on energy release rate and strain energy density is also revealed.     

Interaction of a screw dislocation with a semi-infinite interfacial crack in a magneto-electro-elastic bi-material

The interaction between a screw dislocation and a semi-infinite interfacial crack in a transversely isotropic magneto-electro-elastic bi-material is investigated. The dislocation line is perpendicular to the isotropic basal plane of the bi-material. The elastic and electromagnetic fields induced by the dislocation are obtained through the use of the complex variable method together with the superposition scheme. The stress, electric displacement and magnetic intensity factors as well as the image exerted on the dislocation are given explicitly. We find that the intensity factors are expressed in terms of the so-called effective materials and the radial component of the image force is only dependent on the elastic modulus of the material with the dislocation. As an illustrative example, the bi-material that consists of piezoelectric and piezomagnetic phases is analyzed.     

一维六方准晶中平行螺型位错与有限长裂纹的相互作用

本文采用解析函数理论,利用Muskhelishvili著名的复变函数方法,给出了无限大一维六方准晶中多条平行螺型位错与有限长直裂纹相互作用的解析解,并得到了裂纹尖端的场强度因子和作用在位错上的像力.数值算例讨论了镜像力、场强度因子随位错位置的变化，及位错的位置与分布对广义应力场的影响．     

Electroelastic interaction between a piezoelectric screw dislocation and a circular inhomogeneity with interfacial cracks

A piezoelectric screw dislocation in the matrix interacting with a circular inhomogeneity with interfacial cracks under antiplane shear and in-plane electric loading at infinity was dealt with. Using complex variable method, a general solution to the problem was presented. For a typical case, the closed form expressions of complex potentials in the inhomogeneity and the matrix regions and derived explicitly when the interface containsthe electroelastic field intensity factors weresingle crack. The image force acting on the piezoelectric screw dislocation was calculated by using the perturbation technique and the generalized Peach-Koehler formula. As a result, numerical analysis and discussion show that the perturbation influence of the interfacial crack on the interaction effects of the dislocation and the inhomogeneity is significant which indicates the presence of the interfacial crack will change the interaction mechanism when the length of the crack goes up to a critical value. It is also shown that soft inhomogeneity can repel the dislocation due to their intrinsic electromechanical coupling behavior.     

The interaction between a screw dislocation and a piezoelectric fiber composite with a wedge crack

The interaction problem between a screw dislocation and a piezoelectric fiber composite with a semi-infinite wedge crack is investigated in this paper. The piezoelectric media are assumed to be transversely isotropic with the poling direction along the x ₃ direction. The screw dislocation considered here involves a Burgers vector parallel to the poling direction with a line force and a line charge being applied at the core of the dislocation. Both cases of the screw dislocation located at the matrix and inclusion are observed. The analytical derivation is based on the complex variable and the conformal mapping methods. The exact solutions are obtained to calculate the forces on the dislocation and the crack-tip stress and electric displacement intensity factors. Based on these results, the anti-shielding and shielding effects for different loadings, material combinations, and geometric configurations are discussed in detail.     

The interaction between a screw dislocation and a rigid wedge inhomogeneity with an elastic circular inhomogeneity at the tip

The interaction between a screw dislocation and an elastic semi-cylindrical inhomogeneity abutting on a rigid half-plane is investigated. Utilizing the image dislocations method, the closed form solutions of the stress fields in the matrix and the inhomogeneity region are derived. The image force acting on the dislocation is also calculated. The results were used to study the interaction between a screw dislocation and a rigid wedge inhomogeneity with an elastic circular inhomogeneity at the tip by means of conformal mapping. The results show that an unstable equilibrium point of the dislocation near the semi-cylindrical inhomogeneity is found when the inhomogeneity is softer than the matrix. Moreover, the force on the dislocation is strongly affected by the position of the dislocation and the shear modulus of the semi-circular inhomogeneity. Positive screw dislocations can reduce the SIF of the rigid wedge inhomogeneity (shielding effect) only when it located in the lower half-plane. The shielding effect increases with the increase of the shear modulu of both the matrix and the inhomogeneity and increases with the increase of the wedge angle. The shielding effect (or anti-shielding effect) reaches the maximum when the dislocation tends to the wedge inhomogeneity interface.