Observation of hydrogen adsorption on 6H-SiC(0 0 0 1) surface

We have used coaxial impact-collision ion scattering spectroscopy (CAICISS) and time-of-flight elastic recoil detection analysis (TOF-ERDA) to investigate the adsorption of atomic hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface. It has been found that the saturation coverage of hydrogen on the 6H-SiC(0 0 0 1)√3×√3 surface is about 1.7 ML. Upon saturated adsorption of atomic hydrogen, the √3×√3 surface structure changes to the 1×1 structure. The data of the CAICISS measurements have indicated that as a result of the hydrogen adsorption, Si adatoms on the √3×√3 surface move from T₄ to on-top sites.     

Reactivity of the Cu2O(1 0 0) surface: Insights from first principles calculations

We present a summary of results of systematic first principles calculations of the electronic and geometric structures of the Cu₂O(1 0 0) surface and the process of CO oxidation on this surface (energetics and pathways of adsorption, diffusion and reactions of CO and O₂ on the surface). The (p, T) phase diagram of the Cu₂O(1 0 0) in equilibrium of with gas phase O₂ built using the ab initio thermodynamics approach suggests that the O-terminated surface is preferred over the Cu-terminated one within the entire ranges of pressures and temperatures in which the compound exists. Metastable Cu-terminated Cu₂O(1 0 0) is found to undergo a surface reconstruction in agreement with experiment. We find CO to oxidize spontaneously on the O-terminated Cu₂O(1 0 0) surface by consuming surface O atoms. Our calculations also show that the surface O-vacancies left in the course of the CO oxidation can be easily filled with dissociative adsorption of the gas phase O₂ molecules, which are usually present in reaction environment.     

Ellipsometric detection of GaAs(0 0 1) surface hydrogenation in H2 atmosphere

Optical properties of MBE-grown GaAs(0 0 1) surfaces have been studied by spectroscopic ellipsometry under dynamic conditions of ramp heating and cooling after desorption of passivating As-cap-layer with low pressure H₂ atmosphere (14 Torr) applied to the surface. The temperature dependence of GaAs pseudo-dielectric function with atomically smooth (0 0 1) surface carrying the fixed Ga-rich (4 × 2) reconstruction was obtained for the temperature range of 160–600 °C. It is shown ellipsometrically that GaAs(0 0 1) heating in the molecular hydrogen atmosphere results in the formation of hydrogenated layer on the surface.     

Acetaldehyde photochemistry on TiO2(1 1 0)

The ultraviolet (UV) photon induced decomposition of acetaldehyde adsorbed on the oxidized rutile TiO₂(1 1 0) surface was studied with photon stimulated desorption (PSD) and thermal programmed desorption (TPD). Acetaldehyde desorbs molecularly from TiO₂(1 1 0) with minor decomposition channels yielding butene on the reduced TiO₂ surface and acetate on the oxidized TiO₂ surface. Acetaldehyde adsorbed on oxidized TiO₂(1 1 0) undergoes a facile thermal reaction to form a photoactive acetaldehyde–oxygen complex. UV irradiation of the acetaldehyde–oxygen complex initiated photofragmentation of the complex resulting in the ejection of methyl radical into gas phase and conversion of the surface bound fragment to formate.     

Adsorption of ZnO, (ZnO)2 and (ZnO)3 on MgO(0 0 1)

We have investigated the adsorption of ZnO, atomic Zn, atomic O and (ZnO)_n on the flat MgO(0 0 1) surface by means of density functional calculations. A single ZnO molecule prefers to bind in a position parallel to the surface with the zinc atom above a surface oxygen atom and the oxygen above a magnesium atom. Adsorption of a pair of ZnO molecules leads to the formation of (ZnO)₂ on the surface with geometric parameters slightly distorted from those of the free molecule, providing an indication of surface interaction with the adsorbate. Finally, the trimer forms on the surface with the same general shape as the gas phase trimer, but with angular distortions influenced by surface-molecule interactions. The effects of increasing surface coverage are also explored.     

Use of film thickness and Cu additive to improve (0 0 1) texture in MgO/FePtCu(C) bilayers

A multilayer structure has been proposed that demonstrates improved (0 0 1) texture for FePt-based L1₀ perpendicular media. Achieving a strong perpendicular magnetic anisotropy requires aligning the L1₀ crystallographic c-axis along the film normal. The ordered L1₀ FePt structure is tetragonal with a c/a ratio close to 0.965. This makes discriminating between the three crystallographic variants ([1 0 0], [0 1 0], and the desired [0 0 1]) difficult. Alloying FePt with Cu to reduce the c/a ratio and using a multilayer approach to keep the magnetic layers thin results in a structure with an adjustable M_rt and a strong (0 0 1) texture (rocking curve widths around 2°). This is a remarkable improvement in texture from pure FePt multilayered films or monolithic FePt(X) films. The proposed [MgO(2 nm)/Fe_50−xPt₅₀Cu_x(5 nm)]_×n structure limits grain size in the vertical (perpendicular) direction albeit not in the plane of the film. Carbon can be added to the FePtCu layer to reduce the grain size with minimal degradation of the (0 0 1) orientation.     

Metallization of Ge(0 0 1)-p(2 × 1) surface as result of thermal fluctuations

We present a theoretical study of the metallization of Ge(0 0 1)-p(2 × 1) surface which is observed in experimental data. We have considered the connection between thermal fluctuation of this surface structure and its metallic properties. To this end we have performed long-time MD-DFT simulations. The obtained results show that thermal fluctuation of the Ge(0 0 1)-p(2 × 1) structure may cause its metallization which in not necessary connected with a flip-flop motion of dimer atoms. It was shown that the metallization of the Ge(0 0 1)-p(2 × 1) surface takes place when the dimer buckling angle is reduced to around 11°. In the case of our simulations the considered surface system remained in the metallic state for 25% of the simulation time. We have also found that the metallic state of the fluctuating Ge(0 0 1)-p(2 × 1) surface is built up by dangling bonds of the dimer atoms shifted up (D_up) and down (D_down).     

Density functional calculations for Ni adsorption on Al(1 1 0)

The adsorption of 0.25, 0.5 and 1 monolayer (ML) of the transition metal Ni on the metal substrate Al(1 1 0) was studied using first-principles calculations at the level of density functional theory. The metal–metal system was analyzed with the generalized gradient approximation. Four stable atomic configurations were considered, and the optimized geometries and adsorption energies of different Ni adsorption sites on the Al(1 1 0) surface at selected levels of coverage were calculated and compared. The four-fold hollow site was determined to be the most stable adsorption site with adsorption energy of 5.101 eV at 0.25 ML, 3.874 eV at 0.5 ML and 3.665 eV at 1 ML. The adsorption energies of the four sites slightly decreased as the Ni coverage increased. Work function analysis showed that when Ni is adsorbed on the Al(1 1 0) surface, the work function decreased as the coverage increased due to depolarization. The Mulliken population and density of states were calculated to determine the charge distribution of the adsorption site, confirming that a chemisorption interaction exists between the adsorbed Ni atom and Al(1 1 0) surface atoms.     

Surface alloy formation,short-range order,and deuterium adsorption properties of monolayer PdRu/Ru(0 0 0 1) surface alloys

The formation and structure of monolayer PdRu/Ru(0 0 0 1) surface alloys and their adsorption properties with respect to deuterium adsorption were investigated by atomic resolution scanning tunneling microscopy and by temperature programmed desorption. Surface alloys, prepared by deposition of up to one monolayer of Pd and flash annealing to 1150 K show (i) negligible loss of Pd by desorption or diffusion into the Ru bulk during this procedure and (ii) dominant phase separation into 2D Pd and Ru islands, in contrast to the random distribution in PtRu/Ru(0 0 0 1) surface alloys [H.E. Hoster, A. Bergbreiter, P.M. Erne, T. Hager, H. Rauscher, R.J. Behm, Phys. Chem. Chem. Phys. 10 (2008) 3812]. 2D short-range order parameters and the abundance of specific adsorption ensembles were evaluated for different Pd contents, effective pair interaction (EPI) energies were derived from Monte Carlo simulations. Deuterium adsorption on Pd monolayer films shows a pronounced weakening of adsorption bond, which is attributed to compressive strain and metal–metal interactions between Pd and underlying Ru atoms (‘vertical ligand effect’). Mixed adsorption ensembles containing both Pd and Ru atoms give rise to D₂ desorption in the intermediate temperature regime. The impact of the specific lateral distribution of the two metal species on the chemical surface properties is illustrated by comparison with deuterium adsorption on dispersed PtRu/Ru(0 0 0 1) surface alloys [T. Diemant, H. Rauscher, R.J. Behm, J. Phys. Chem. C 112 (2008) 8381].     

Optical characterization of methanol adsorption on the bare and oxygen precovered Cu(1 1 0) surface

We have studied the adsorption and reaction of methanol on the bare and oxygen precovered Cu(1 1 0) surface at 200 K using reflectance difference spectroscopy (RDS). On the bare and fully oxygen covered surface, the sticking coefficient is close to zero. In contrast, on the partially oxygen covered surface, a sticking coefficient close to unity is obtained. This observation suggests a high mobility of methanol on both bare and oxygen covered Cu(1 1 0) and of methoxy on Cu(1 1 0). Two reaction regimes, an oxygen supply limited and an adsorption site limited regime are identified. The transition between these two regimes occurs for an oxygen coverage of about 0.2.     

Coverage effects on the adsorption of sulfur on Co(0 0 0 1): A DFT study

The adsorption of sulfur on Co(0 0 0 1) was studied using density functional theory calculations at coverage from 0.11 ML to 1.0 ML. Calculated results indicate that atomic S favors in hollow sites with bond S–Co dominated at lower coverage and at higher coverage the strong adsorbate S–S interaction leads to the formation of S₂ species. It was shown that the adsorption energy generally increases (gets weaker) with the coverage in a near linear fashion for the most stable configurations. In addition, modification of the surface electronic properties has been discussed and some discrepancy are found between our calculations and the findings of O adsorption on Au(1 1 1) and Pt(1 1 1) surfaces.     

Near-surface stresses in silicon(0 0 1)

We report here on a detailed atomistic stress analysis of the near-surface stresses on the 2 × 1 surface reconstruction on Si(0 0 1). We find that the surface stresses are spatially periodic with fairly large amplitude. We additionally investigate the stresses in the neighborhood of an S_A-type step.     

Cu dimer diffusion on strained Cu(0 0 1)

Cu dimer diffusion energy barrier on strained Cu(0 0 1) surfaces has been studied with nudged elastic band method (NEB) and embedded atom method (EAM). Dimer exchange and hopping mechanisms are chosen as the initial diffusion paths in the NEB method. It is shown here that the dimer exchange is dominant on tensile surfaces and the dimer hopping is dominant on compressive surfaces. For most strain conditions Cu dimer diffusion energy barrier is lower than Cu monomer diffusion barrier. The concerted movement of the remaining adatom toward the hopping adatom lowers the dimer hopping barrier. The adsorption induced relaxation makes the dimer exchange barriers lower than the monomer exchange barriers on tensile surfaces. Transition state theory is used to calculate the diffusion frequencies as a function of temperature. No surface crowdion is observed on the shear strained surfaces for the dimer diffusion.     

First-principles study of small palladium clusters on NiAl(1 1 0) alloy surface

Theoretical calculations focused on the geometry, stability, electronic and magnetic properties of small palladium clusters Pd_n (n=1–5) adsorbed on the NiAl(1 1 0) alloy surface were carried out within the framework of density functional theory (DFT). In agreement with the experimental observations, both Ni-bridge and Al-bridge sites are preferential for the adsorption of single palladium atom, with an adsorption energy difference of 0.04 eV. Among the possible structures considered for Pd_n (n=1–5) clusters adsorbed on NiAl(1 1 0) surface, Pd atoms tend to form one-dimensional (1D) chain structure at low coverage (from Pd₁ to Pd₃) and two-dimensional (2D) structures are more stable than three-dimensional (3D) structures for Pd₄ and Pd₅. Furthermore, metal-substrate bonding prevails over metal–metal bonding for Pd cluster adsorbed on NiAl(1 1 0) surface. The density of states for Pd atoms of Pd/NiAl(1 1 0) system are strongly affected by their chemical environment. The magnetic feature emerged upon the adsorption of Pd clusters on NiAl(1 1 0) surface was due to the charge transfer between Pd atoms and the substrate. These findings may shade light on the understanding of the growth of Pd metal clusters on alloy surface and the construction of nanoscale devices.     

Metastable helium atom scattering from Ni(1 1 0) surface

The survival probability (SP) of metastable helium atoms (He¹) during scattering from the clean, alkalated and oxygen-adsorbed Ni(1 1 0) surfaces has been examined in the kinetic energy range of 50–400 meV. The measurements were carried out using a time-of-flight technique and a pulsed-discharge type metastable helium atom source. The SP is nearly constant for a kinetic energy (E_kin) of 50–100 meV and decreases exponentially with the increase in E_kin at 100–400 meV. It has been shown that the SP at E_kin=100–400 meV depends on the repulsive part of the He¹-surface interaction potential.     

Structural and magnetic properties of BCC Fe/Co (0 0 1) superlattices

In thin layered Fe/Co (0 0 1), grown on MgO (0 0 1), both Fe and Co crystallize in the body-centered cubic (BCC) structure, as seen in a series of superlattices where the layer thickness of the components is varied from two to twelve atomic monolayers. These superlattices have novel magnetic properties as observed by magnetization and polarized neutron reflectivity measurements. There is a significant enhancement of the magnetic moments of both Fe and Co at the interfaces. Furthermore, the easy axis of the system changes from [1 0 0] for films of low cobalt content to [1 1 0] for a Co content exceeding 33%. No indication of a uniaxial anisotropy component is found in any of the samples. The first anisotropy constant (K₁) of BCC Co is found to be negative with an estimated magnitude of 110 kJ/m³ at 10 K. In all cases, the magnetic moments of Fe and Co have parallel alignment.     

Improved electrical parameters of vacuum annealed Ni/4H-SiC (0 0 0 1) Schottky barrier diode

The reported work has been focused on the improvement of electrical parameters of Schottky diode using vacuum annealing at mild temperature in Ar gas ambient. Nickel Schottky barrier diodes were fabricated on 50 μm epitaxial layer of n-type 4H-SiC (0 0 0 1) substrate. The values of leakage current, Schottky barrier height (?_B), ideality factor (η) and density of interface states (N_SS) were obtained from experimentally measured current–voltage (I–V) and capacitance–voltage (C–V) characteristics before and after vacuum annealing treatment. The data revealed that ?_B, η and reverse leakage current for the as-processed diodes are 1.25 eV, 1.6 and 1.2 nA (at ?100 V), respectively, while for vacuum annealed diodes these parameters are 1.36 eV, 1.3 and 900 pA (at same reverse voltage). Improved characteristics have been resulted under the influence of vacuum annealing because of lesser number of minority carrier generation due to incessant reduction of number of available discrete energy levels in the bandgap of 4H-SiC substrate and lesser number of interface states density at Ni/4H-SiC (0 0 0 1) interface.     

A model for the dissociative adsorption of N2O on Cu(1 0 0) using a continuous potential energy surface

For the first time, a continuous ab initio potential energy surface (PES) taking into account all molecular degrees of freedom is built and used to model the reaction of a polyatomic molecule with a surface. DFT slab calculations are used to sample the configuration space of the system N₂O/Cu(1 0 0), and the PES function is built with a method of Manzhos and Carrington [J. Chem. Phys. 127 (2007) 014103] using dimensionality reduction from only 4300 single-point energies. Molecular dynamics simulations are performed on the PES to calculate the probability of dissociative adsorption.     

Adsorption behaviors of CO on W(1 1 0) and Mo(1 1 0) surfaces in the β-state are still not clear

Adsorption structure of CO on W and Mo at above ～800 K (β-CO) has been extensively studied in the history of surface science. Most of the previous studies concluded that CO is dissociated in the β-CO, and a tilted structure plays a role as a precursor state of the dissociation. We have recently studied valence band spectra of the β-CO on W(1 1 0), oxygen-precovered W(1 1 0) and Mo(1 1 0) using synchrotron radiation. CO-derived states with binding energies close to those of the 4σ-CO can be observed, implying a non-dissociative chemisorption in this high-temperature state. We suggest that still some additional works need to be done in order to understand adsorption structure of β-CO completely.