Evaluation of the enantioselectivity of glycogen-based dual chiral selector systems towards basic drugs in capillary electrophoresis

Several chiral reagents including cyclodextrins (CDs) and derivatives, crown ethers, proteins, chiral surfactants and polymers have been involved in dual selector systems for enantioseparation of a series of chiral compounds by capillary electrophoresis (CE). In comparison to the chiral reagents above-mentioned, there is no report concerning the use of polysaccharides in dual chiral CE system. In this paper we first investigate the enantioselectivity of polysaccharide-based dual selector systems towards some chiral drugs. During our recent work, glycogen belonging to the class of branched polysaccharides has been used as a novel chiral selector in CE. In this study, three glycogen-based dual chiral CE systems have been established for enantiomeric separations of several racemic basic drugs consisting of duloxetine, cetirizine, citalopram, sulconazole, laudanosine, amlodipine, propranolol, atenolol and nefopam. These three dual systems combined glycogen (neutral polysaccharide) with chondroitin sulfate A (CSA, ionic polysaccharide), β-CD and HP-β-CD, respectively. It was found that the dual system of glycogen/CSA exhibited good enantioselective properties toward the tested drugs. More importantly, compared to the single selector systems, synergistic effect was observed when glycogen was used with CSA for most of the analytes. This indicated the enhancement of enantioseparation observed for these analytes in glycogen/CSA system might be due to some favorable interaction effects between glycogen and CSA. Moreover, in order to evaluate the stereoselectivity of glycogen/CSA, the influences of buffer pH and selector concentration on enantioseparation of the studied drugs were also investigated.     

New mathematic model for predicting chiral separation using molecular docking: Mechanism of chiral recognition of triadimenol analogues

The purpose of this paper was to study the enantioseparation mechanism of triadimenol compounds by carboxymethylated (CM)‐β‐CD mediated CE. All the enantiomers were separated under the same experimental conditions to study the chiral recognition mechanism using a 30 mM sodium dihydrogen phosphate buffer at pH 2.2 adjusted by phosphoric acid. The inclusion courses between CM‐β‐CD and enantiomers were investigated by the means of molecular docking technique. It was found that there were at least three points (one hydrophobic bond and two hydrogen bonds) involved in the interaction of each enantiomer with the chiral selectors. A new mathematic model has been built up based on the results of molecular mechanics calculations, which could analyze the relationship between the resolution of enantioseparation and the interaction energy in the docking area. Comparing the results of the separation by CE, the established mathematic model demonstrated good capability to predict chiral separation of triadimenol enantiomers using CM‐β‐CD mediated CE.     

Combined use of hydroxypropyl‐β‐cyclodextrin and ionic liquids for the simultaneous enantioseparation of four azole antifungals by CE and a study of the synergistic effect

A CE method employing a dual system of hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) and ionic liquids (ILs) has been developed for the simultaneous enantioseparation of four azole antifungals for the first time. In this study, three different types of ILs were employed as modifiers and among them dodecyl trimethyl ammonium chloride was found to be the most effective. The effects of the concentration, cations, and anions of ILs on the enantioseparation were investigated. With the developed dual system, all the enantiomers were well separated in resolutions of 3.8, 3.5, 2.8, and 2.5 for miconazole, econazole, ketoconazole, and itraconazole, respectively. The interactions between dodecyl trimethyl ammonium chloride and HP‐β‐CD were also studied using a neutral polyacrylamide coated capillary and ¹H NMR spectroscopy to further explore the synergistic effect involved. It was found that ILs improved the enantioseparation not only by changing the EOF, but also by interactions with HP‐β‐CD that could change its ability of forming inclusion complex with the enantiomers.     

The Use of Dual Cyclodextrin Chiral Selector Systems in the Enantioseparation of Pharmaceuticals by Capillary Electrophoresis: An Overview

Cyclodextrin (CD) derivatives are the most efficient and frequently used chiral selectors (CSs) in capillary electrophoresis (CE). There are situations when the use of a single CD as CS is not enough to obtain efficient chiral discrimination of the enantiomers; in these cases, sometimes this problem can be resolved using a dual CD system. The use of dual CD systems can often dramatically enhance enantioseparation selectivity and can be applied for the separation of many analytes of pharmaceutical interest for which enantioseparation by CE with another CS systems can be problematic. Usually in a dual CD system an anionic CD is used together with a neutral one, but there are situations when the use of a cationic CD with a neutral one or the use of two neutral CDs or even two ionized CDs can be an efficient solution. In the current review we present general aspects of the use of dual CD systems in the analysis of pharmaceutical substances. Several examples of applications of the use of dual CD systems in the analysis of pharmaceuticals are selected and discussed. Theoretical aspects regarding the separation of enantiomers through simultaneous interaction with the two CSs are also explained. Finally, advantages, disadvantages, potential and new direction in this chiral analysis field are highlighted.     

New single isomer negatively charged β‐cyclodextrin derivatives as chiral selectors in capillary electrophoresis

To improve resolution power of chiral selector and enantiomeric peak efficiency in CE, single isomer negatively charged β‐CD derivatives, mono(6‐deoxy‐6‐sulfoethylthio)‐β‐CD (SET‐β‐CD) bearing one negative charge and mono[6‐deoxy‐6‐(6‐sulfooxy‐5,5‐bis‐sulfooxymethyl)hexylthio]‐β‐CD (SMHT‐β‐CD) carrying three negative charges, were synthesized. The structure of these two β‐CD derivatives was confirmed by ¹H NMR and MS. SET‐β‐CD and SMHT‐β‐CD successfully resolved the enantiomers of several basic model compounds. SMHT‐β‐CD provided for a significantly greater enantioseparation than SET‐β‐CD at lower concentrations. This appears to be due to the higher binding affinity of SMHT‐β‐CD to the model compounds and the wider separation window resulting from an increased countercurrent mobility of the selector. Overall, the new chiral selectors provided enantioseparations with high peak efficiency while avoiding peak distortion due to polydispersive and electrodispersive effects. The information obtained from an apparent binding constant study suggested that the enantioseparation of the model compounds followed the predictions of charged resolving agent migration model and that the observed degree of enantioseparation difference were due to the magnitude of differences in both enantiomer‐chiral selector binding affinities (ΔK) and the mobilities of the complexed enantiomers (Δμ_c).     

Investigation of the enantioselectivity of tetramethylammonium‐lactobionate chiral ionic liquid based dual selector systems toward basic drugs in capillary electrophoresis

Recently, chiral ionic liquids (CILs) have received increasing interest in chiral separation by CE. Nevertheless, the lack of deep perception of the specific mechanism about CILs in CE for enantioseparation still perplexes a legion of researchers, despite the strenuous efforts. In this paper, a lactobionic acid based ionic liquid, tetramethylammonium‐lactobionate (TMA‐LA) was applied for the first time in CE to establish dual selector system with clindamycin phosphate (CP) for enantiomeric separation. Compared to single CP system or single TMA‐LA system significantly improved separations of seven tested rameric drugs (propranolol, nefopam, citalopram, chlorphenamine, metoprolol, bisoprolol, and esmolol) were observed in the dual selector systems. Several crucial parameters such as type and proportion of organic modifier, buffer composition and pH, and concentration of TMA‐LA/CP were systematically investigated to achieve satisfied enantioseparation. Meanwhile, molecular modeling was applied to demonstrate the chiral recognition mechanism of the TMA‐LA/CP dual‐selector separation system using the molecular docking software Autodock, which well supported the experimental results. The existence of TMA‐LA/CP complex may give rise to a higher discriminatory ability against the enantiomers, indicating the reason of improved separation in TMA‐LA/CP system. All the influence factors evaluated by means of Statistical Product and Service Solutions (SPSS) to research the influences on the chiral separation system.     

Capillary electrophoretic enantioseparation of m‐nisoldipine using two different β‐cyclodextrins

The methods for the enantioseparation of m‐nisoldipine, a new 1,4‐dihydropyridine calcium ion antagonist, were developed. The elaborated methods of m‐nisoldipine enantiomers separation were successfully performed using an anionic CD–sulfobutyl ether‐β‐CD (SBE‐β‐CD) or carboxymethyl‐β‐CD as chiral selector. However, the results indicated that SBE‐β‐CD was a better chiral selector for enantioseparation of the neutral m‐nisoldipine. Furthermore, comparing the two SBE‐β‐CDs, the derivative with a higher degree of substitution (DS) of 7.0 induced better enantioresolution than the one with low DS (4.0). In addition, possible chiral recognition mechanisms of dihydropyridines were discussed.     

Simultaneous enantioseparation of cyproconazole,bromuconazole, and diniconazole enantiomers by CD‐modified MEKC

An efficient method for the simultaneous enantioseparation of cyproconazole, bromuconazole, and diniconazole enantiomers was developed by CD‐modified MEKC using a dual mixture of neutral CDs as chiral selector. Three neutral CDs namely hydroxypropyl‐β‐CD, hydroxypropyl‐γ‐CD, and γ‐CD were tested as chiral selectors at different concentrations ranging from 10, 20, 30 and 40 mM, but enantiomers of the studied fungicides were not completely separated. The best dual chiral recognition mode for the simultaneous separation of cyproconazole, bromuconazole, and diniconazole enantiomers was achieved with a mixture of 27 mM hydroxypropyl‐β‐CD and 3 mM hydroxypropyl‐γ‐CD in 25 mM phosphate buffer (pH 3.0) containing 40 mM SDS to which methanol‐acetonitrile (10%:5% v/v) was added as organic modifiers. The best separation was based on the appearance of 10 peaks simultaneously, with good resolution (R_s 1.1–15.9), and peak efficiency (N>200 000). Good repeatabilities in the migration time, peak area, and peak height were obtained in terms of RSD ranging from (0.72 to 1.06)%, (0.39 to 3.49)%, and (1.90 to 4.84)%, respectively.     

Equilibrium Studies on Reactive Extraction of α-Cyclohexylmandelic Enantiomers Using Hydrophilic β-Cyclodextrin Derivatives Extractants

β‐Cyclodextrin (β‐CD) is negligibly soluble in organic liquids and can be modified to achieve a higher solubility in water. In this paper, racemic α‐cyclohexyl‐mandelic acid (α‐CHMA) was separated by chiral reactive extraction with aqueous β‐cyclodextrin derivatives. Hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD), hydroxyethyl‐β‐cyclodextrin (HE‐β‐CD), and methyl‐β‐cyclodextrin (Me‐β‐CD) were selected as chiral selectors for reactive extraction of α‐CHMA enantiomers from organic phase to aqueous phase. Factors affecting the extraction efficiency were investigated, including the types of organic solvents and β‐CD derivatives, the concentrations of the chiral selector and α‐CHMA enantiomers, pH and temperature. The experimental results demonstrate that HP‐β‐CD, HE‐β‐CD, and Me‐β‐CD have stronger recognition abilities for S‐α‐CHMA than for R‐α‐CHMA. Among the three derivatives, HP‐β‐CD shows the strongest separation factor for α‐CHMA enantiomers. A high enantioseparation efficiency with a maximum separation factor (α) of 2.02 is observed at pH 2.5 and 5°C.     

CE‐LIF chiral separation of aspartic acid and glutamic acid enantiomers using human serum albumin and sodium cholate as dual selectors

Sodium cholate (SC), β‐CD, hydroxypropyl (HP)‐β‐CD, HSA, and the dual mixtures of them were evaluated for the analysis of aspartic acid (Asp) and glutamic acid (Glu) enantiomers fluorescently tagged with 5‐(4,6‐dichloro‐s‐triazin‐2‐ylamino) fluorescein (DTAF) by CE with LIF detection. Among the investigated chiral selectors and the dual selector systems, the dual selector systems of HSA and SC resulted to be the most useful chiral selectors allowing relatively high chiral resolution. Several experimental parameters such as chiral reagent type and concentration, buffer concentration, and pH, type and concentration of organic modifier were studied in order to find the optimum conditions for the chiral resolution of the two derivatized amino acids in their enantiomers. The effect of different variables that affect derivatization (time, temperature, pH, and DTAF concentration) was studied. Under optimum conditions, the analytes were separated in a short 10.5 min analysis time, and the RSDs for migration time and peak area were less than 0.12 and 2.8%, respectively. The method was applied for the analysis of compound amino acids injection without interference from other amino acids in the sample matrices observed.     

Comparative analysis of the full set of methylated β‐cyclodextrins as chiral selectors in capillary electrophoresis

The chiral separation ability of the full library of methylated‐β‐cyclodextrins towards pharmacologically significant racemic drugs including basic compounds was studied by chiral CE. The syntheses of all the methylated, single isomer β‐cyclodextrins were revised and optimized and the aqueous solubility of the derivatives was unambiguously established. The three most relevant commercially available methylated isomeric mixtures were also included in the screening, so a total of ten various methylated CDs were investigated. The effects of the selector concentration on the enantiorecognition properties at acidic pH were investigated. Among the dimethylated β‐cyclodextrins, the heptakis (2,6‐di‐O‐methyl)‐β‐cyclodextrin isomer (2,6‐DIMEB) resulted to be the most versatile chiral selector. Terbutaline was selected as a model compound for the in‐depth investigation of host‐guest enantiodiscrimination ability. The association constants between the two terbutaline enantiomers and 2,6‐DIMEB were determined in order to support that the enantioseparation is driven by differences is host‐guest binding. The migration order of the enantiomers was confirmed by performing spiking experiments with the pure enantiomers. 1D and 2D NMR spectroscopy was applied to the 2,3‐, and 2,6‐DIMEB/terbutaline systems to rationalize at molecular level the different enantioseparation ability of the dimethylated β‐cyclodextrin selectors.     

Designed combination of chiral selectors for adjustment of enantioseparation selectivity in capillary electrophoresis.

In this study an attempt has been made to explain the reasons for changing the enantioseparation selectivity in some dual cyclodextrin (CD) systems compared to the use of single chiral selectors in capillary electrophoresis (CE). An explanation for selectivity changes is proposed based on the effect of the chiral selector on the mobility of the analyte. In order to support the proposed mechanism, several dual systems were designed on the basis of the known recognition pattern of enantiomers for individual CDs. In most cases the separation selectivity could be adjusted in a designed way. There was no experimental evidence for simultaneous binding of a given chiral analyte with both chiral selectors or of chiral recognition of an analyte complex with one CD by another CD.     

Liquid chromatography with mass spectrometry enantioseparation of pomalidomide on cyclodextrin‐bonded chiral stationary phases and the elucidation of the chiral recognition mechanisms by NMR spectroscopy and molecular modeling

A sensitive and validated liquid chromatography with mass spectrometry method was developed for the enantioseparation of the racemic mixture of pomalidomide, a novel, second‐generation immunomodulatory drug, using β‐cyclodextrin‐bonded stationary phases. Four cyclodextrin columns (β‐, hydroxypropyl‐β‐, carboxymethyl‐β‐, and sulfobutyl‐β‐cyclodextrin) were screened and the effects of eluent composition, flow rate, temperature, and organic modifier on enantioseparation were studied. Optimized parameters, offering baseline separation (resolution = 2.70 ± 0.02) were the following: β‐cyclodextrin stationary phase, thermostatted at 15°C, and mobile phase consisting of methanol/0.1% acetic acid 10:90 v/v, delivered with 0.8 mL/min flow rate. For the optimized parameter at multiple reaction monitoring mode 274.1–201.0 transition with 20 eV collision energy and 100 V fragmentor voltage the limit of detection and limit of quantitation were 0.75 and 2.00 ng/mL, respectively. Since enantiopure standards were not available, elution order was determined upon comparison of the circular dichroism signals of the separated pomalidomide enantiomers with that of enantiopure thalidomide. The mechanisms underlying the chiral discrimination between the enantiomers were also investigated. Pomalidomide‐β‐cyclodextrin inclusion complex was characterized using nuclear magnetic resonance spectroscopy and molecular modeling. The thermodynamic aspects of chiral separation were also studied.     

Enantiomeric separation of some common controlled stimulants by capillary electrophoresis with contactless conductivity detection

CE methods with capacitively coupled contactless conductivity detection (C⁴D) were developed for the enantiomeric separation of the following stimulants: amphetamine (AP), methamphetamine (MA), ephedrine (EP), pseudoephedrine (PE), norephedrine (NE) and norpseudoephedrine (NPE). Acetic acid (pH 2.5 and 2.8) was found to be the optimal background electrolyte for the CE‐C⁴D system. The chiral selectors, carboxymethyl‐β‐cyclodextrin (CMBCD), heptakis(2,6‐di‐O‐methyl)‐β‐cyclodextrin (DMBCD) and chiral crown ether (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid (18C6H₄), were investigated for their enantioseparation properties in the BGE. The use of either a single or a combination of two chiral selectors was chosen to obtain optimal condition of enantiomeric selectivity. Enantiomeric separation of AP and MA was achieved using the single chiral selector CMBCD and (hydroxypropyl)methyl cellulose (HPMC) as the modifier. A combination of the two chiral selectors, CMBCD and DMBCD and HPMC as the modifier, was required for enantiomeric separation of EP and PE. In addition, a combination of DMBCD and 18C6H₄ was successfully applied for the enantiomeric separation of NE and NPE. The detection limits of the enantiomers were found to be in the range of 2.3–5.7 μmol/L. Good precisions of migration time and peak area were obtained. The developed CE‐C⁴D method was successfully applied to urine samples of athletes for the identification of enantiomers of the detected stimulants.     

Enantiomeric separation of glycidyl tosylate by CE: Application to the study of catalytic asymmetric epoxidation of allyl alcohol

A CE method using CDs as chiral selectors was developed and validated to achieve the separation of glycidyl tosylate enantiomers originated by in situ derivatization of glycidol enantiomers obtained in asymmetric epoxidation of allyl alcohol with chiral titanium‐tartrate complexes as catalysts. The effects of the nature, pH and concentration of the buffer, the nature and concentration of chiral selector, the addition of SDS, methanol, ethanol or 2‐propanol, the capillary temperature, the effective capillary length and the applied voltage on the chiral resolution of glycidyl tosylate enantiomers were investigated. The best separation conditions were achieved using a Tris‐borate buffer mixture (50 and 25 mM, respectively) at pH=9.3 with a dual CD system consisting of 2.5% succinyl‐β‐CD and 1.0% β‐CD w/v at 15°C. A baseline separation (resolution～2.0) of the glycidyl tosylate enantiomers was obtained in a relatively short time (less than 12 min). Satisfactory results were obtained in terms of linearity (r>0.99) and intermediate precision (RSD below 8.5%). The LOD and LOQ were 3.0 and 10.0 mg/L, respectively, and the recoveries ranged from 99.8 to 108.8%. Finally, the method was applied to the determination of the enantiomeric excess and the yield obtained in the asymmetric epoxidation of allyl alcohol employing chiral titanium‐tartrate complexes as catalysts after an in situ derivatization of glycidol enantiomers to glycidyl tosylate.     

Separation of brombuterol enantiomers in capillary electrophoresis with cyclodextrin‐type chiral selectors and investigation of structure of selector‐selectand complexes using nuclear magnetic resonance spectroscopy

The major goal of this study was to determine the affinity pattern of brombuterol (BB) enantiomers toward various cyclodextrins (CD) and to evaluate the potential of NMR spectroscopy for understanding fine mechanisms of interactions between CDs and BB enantiomers. Separation of BB enantiomers was performed in a fused‐silica capillary using a phosphate buffer, pH 2.5, at the room temperature in the normal polarity mode. It was shown once again that CE in combination with NMR spectroscopy represents a very sensitive tool for studies of affinity patterns and structure of CD complexes with chiral guests. Although opposite affinity patterns of BB enantiomers were observed toward native β‐ and γ‐CDs, no significant differences between the structures of the complexes of these two CDs with BB were detected by NMR spectroscopy. In contrary to this, the opposite affinity pattern of BB enantiomers toward β‐CD and its two sulfated derivatives, heptakis (2,3‐O‐diacetyl‐6‐sulfo)‐β‐CD (HDAS‐β‐CD) and heptakis (2‐O‐methyl‐3,6‐di‐O‐sulfo)‐β‐CD (HMDS‐β‐CD) was associated with major differences in the structure of the complexes. In addition, it was shown again that HMDS‐β‐CD provides separation of enantiomers without formation of inclusion‐type complex with the chiral analyte.     

Chiral separation of lansoprazole and rabeprazole by capillary electrophoresis using dual cyclodextrin systems

Novel capillary electrophoresis methods using CDs as chiral selectors were developed and validated for the chiral separation of lansoprazole and rabeprazole, two proton pump inhibitors. Fourteen different neutral and anionic CDs were screened at pH 4 and 7 in the preliminary analysis. Sulfobutyl‐ether‐β‐CD with a degree of substitution of 6.5 and 10 at neutral pH proved to be the most suitable chiral selector for both compounds. Various dual CD systems were also compared, and the possible mechanisms of enantiomer separation were investigated. A dual selector system containing sulfobutyl‐ether‐β‐CD degree of substitution 6.5 and native γ‐CD proved to be the most adequate system for the separations. Method optimization was carried out using an experimental design approach, performing an initial fractional factorial screening design, followed by a central composite design to establish the optimal analytical conditions. The optimized methods (25 mM phosphate buffer, pH 7, 10 mM sulfobutyl‐ether‐β‐CD/20 mM γ‐CD, +20 kV voltage; 17°C temperature; 50 mbar/3 s injection, detection at 210 nm for lansoprazole; 25 mM phosphate buffer, pH 7, 15 mM sulfobutyl‐ether‐β‐CD/30 mM γ‐CD, +20 kV voltage; 18°C temperature; 50 mbar/3 s injection, detection at 210 nm for rabeprazole) provided baseline separation for lansoprazole (R_s = 2.91) and rabeprazole (R_s = 2.53) enantiomers with favorable migration order (in both cases the S‐enantiomers migrates first). The optimized methods were validated according to current guidelines and proved to be reliable, linear, precise, and accurate for the determination of 0.15% distomer as chiral impurity in dexlansoprazole and dexrabeprazole samples.     

Combined use of l‐alanine tert butyl ester lactate and trimethyl‐β‐cyclodextrin for the enantiomeric separations of 2‐arylpropionic acids nonsteroidal anti‐inflammatory drugs

In this study, a new CE method, employing a binary system of trimethyl‐β‐CD (TM‐β‐CD) and a chiral amino acid ester‐based ionic liquid (AAIL), was developed for the chiral separation of seven 2‐arylpropionic acid nonsteroidal anti‐inflammatory drugs (NSAIDs). In particular, the enantioseparation of ibuprofen, ketoprofen, carprofen, indoprofen, flurbiprofen, naproxen, and fenoprofen was improved significantly by supporting the BGE with the chiral AAIL l ‐alanine tert butyl ester lactate (l ‐AlaC₄Lac). Parameters, such as concentrations of TM‐β‐CD and l ‐AlaC₄Lac, and buffer pH, were systematically examined in order to optimize the chiral separation of each NSAID. It was observed that the addition of the AAIL into the BGE improved both resolution and efficiency significantly. After optimization of separation conditions, baseline separation (R_s>1.5) of five of the analytes was achieved in less than 11 min, while the resolution of ibuprofen and flurbiprofen was approximately 1.2. The optimized enantioseparation conditions for all analytes involve a BGE of 5 mM sodium acetate/acetic acid (pH 5.0), an applied voltage of 30 kV, and a temperature of 20°C. In addition, the results obtained by computing the %‐RSD values of the EOF and the two enantiomer peaks, demonstrated excellent run‐to‐run, batch‐to‐batch, and day‐to‐day reproducibilities.     

Enantioseparation of chiral aromatic acids by multiple dual mode counter‐current chromatography using hydroxypropyl‐β‐cyclodextrin as chiral selector

This work concentrates on extending the utilization of multiple dual mode (MDM) counter‐current chromatography in chiral separations. Two aromatic acids, 2‐(6‐methoxy‐2‐naphthyl)propionic acid (NAP) and 2‐phenylpropionic acid (2‐PPA), were enantioseparated by MDM counter‐current chromatography using hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) as chiral selector. The two‐phase solvent systems consisting of n‐hexane/ethyl acetate 0.1 mol/L phosphate buffer pH 2.67 containing 0.1 mol/L HP‐β‐CD (7.5:2.5:10 for NAP and 7:3:10 for 2‐PPA, v/v/v) were used. Conventional MDM and modified MDM were compared according to peak resolution under current separation mechanism. The influence of elution time after the first‐phase inversion and number of cycles for MDM were investigated. Peak resolution of NAP and 2‐PPA increased from 0.62 to 1.05 and 0.72 to 0.84, respectively, using optimized MDM conditions. Being an alternative elution method for counter‐current chromatography, MDM elution greatly improved peak resolution in chiral separations.     

Determination of the enantiomeric and diastereomeric impurities of RS‐glycopyrrolate by capillary electrophoresis using sulfated‐β‐cyclodextrin as chiral selectors

A practical chiral CE method, using sulfated‐β‐CD as chiral selector, was developed for the enantioseparation of glycopyrrolate containing two chiral centers. Several parameters affecting the separation were studied, including the nature and concentration of the chiral selectors, BGE pH, buffer type and concentration, separation voltage, and temperature. The separation was carried out in an uncoated fused‐silica capillary of (effective length 40 cm) × 50 μm id with a separation voltage of 20 kV using 30 mM sodium phosphate buffer (pH 7.0, adjusted with 1 M sodium hydroxide) containing 2.0% w/v sulfated‐β‐CD at 25°C. Finally, the method for determining the enantiomeric impurities of RS‐glycopyrrolate was proposed. The method was further validated with respect to its specificity, linearity range, accuracy and precision, LODs, and quantification in the expected range of occurrence for the isomeric impurities (0.1%).