Amperometric Biosensors for Glucose Based on Layer‐by‐Layer Assembled Functionalized Carbon Nanotube and Poly (Neutral Red) Multilayer Film

Abstract

Multiwalled carbon nanotubes (MWNTs) were treated with a mixture of concentrated sulfuric and nitric acid to introduce carboxylic acid groups to the nanotubes. Conducting polymer film was prepared by electrochemical polymerization of neutral red (NR). By using a layer‐by‐layer method, homogeneous and stable MWNTs and poly (neutral red) (PNR) multilayer films were alternately assembled on glassy carbon (GC) electrodes. With the introduction of PNR, the MWNTs/PNR multilayer film system showed synergy between the MWNTs and PNR, with a significant improvement of redox activity due to the excellent electron‐transfer ability of carbon nanotubes (CNTs) and PNR. The electropolymerization is advantageous, providing both prolonged long‐term stability and improved catalytic activity of the resulting modified electrodes. The MWNTs/PNR multilayer film modified glassy carbon electrode allows low potential detection of hydrogen peroxide with high sensitivity and fast response time. As compared to MWNTs and PNR‐modified GC electrodes, the magnitude of the amperometric response of the MWNTs/PNR composite‐modified GC electrode is more than three‐fold greater than that of the MWNTs modified GC electrode, and nine‐fold greater than that of the PNR‐modified GC electrode. With the immobilization of glucose oxidase onto the electrode surface using glutaric dialdehyde, a biosensor that responds sensitively to glucose has been constructed. In pH 6.98 phosphate buffer, nearly interference‐free determination of glucose has been realized at ?0.2 V vs. SCE with a linear range from 50 µM to 10 mM and response time <10s. The detection limit was 10 µM glucose (S/N=3).     

Fabrication of Bismuth/Multi-walled Carbon Nanotube Composite Modified Glassy Carbon Electrode for Determination of Cobalt

A bismuth/multi‐walled carbon nanotube (Bi/MWNT) composite modified electrode for determination of cobalt by differential pulse adsorptive cathodic stripping voltammetry is described. The electrode is fabricated by potentiostatic pre‐plating bismuth film on an MWNT modified glassy carbon (GC) electrode. The Bi/MWNT composite modified electrode exhibits enhanced sensitivity for cobalt detection as compared with the bare GC, MWNT modified and bismuth film electrodes. Numerous key experimental parameters have been examined for optimum analytical performance of the proposed electrode. With an adsorptive accumulation of the Co(II)‐dimethylglyoxime complex at ?0.8 V for 200 s, the reduction peak current is proportional to the concentration of cobalt in the range of 4.0×10^?10?1.0×10^?7 mol/L with a lower detection limit of 8.1×10^?11 mol/L. The proposed method has been applied successfully to cobalt determination in seawater and lake water samples.     

掺杂多壁碳纳米管改性聚溴甲酚绿膜修饰电极的制备、表征与应用研究

研究了掺杂多壁碳纳米管(MWNT)改性聚溴甲酚绿膜(PBG),以不同修饰方法制备了4种修饰电极,用扫描电镜、交流阻抗及循环伏安法等对电极进行表征。结果表明:4种修饰电极的电活化面积均得到明显提高,其中以层层修饰制备的聚溴甲酚绿膜/多壁碳纳米管复合膜(PBG/MWNT/GC)电极最能发挥MWNT和PBG的电活性。将电极用于8-羟基喹啉(8-HQ)电化学行为的研究,结果表明:4种修饰电极的伏安响应明显提高,且8-HQ在PBG/MWNT/GC上的氧化峰电位负移最多,峰电流最大,约为裸玻碳电极的4.5倍,电催化作用显著增强。8-HQ在PBG/MWNT/GC上电极反应的电子转移数和质子数均为1,是吸附控制的不可逆电氧化过程,氧化峰电流Ip与浓度c在4.0×10-6～3.5×10-4mol/L范围内呈良好的线性关系,r=-0.997 2,检出限(S/N=3)为1.96×10-8mol/L。PBG/MWNT/GC修饰电极可实现8-HQ的快捷、简便测定。     

Electrochemical Detection of Persulfate at the Modified Glassy Carbon Electrode with Nanocomposite Containing Nano‐Ruthenium Oxide/Thionine and Nano‐Ruthenium Oxide/Celestine Blue

The present study describes the fabrication of a sensitive amperometric sensor for the determination of persulfate. The immobilization surface was prepared by modifying a glassy carbon (GC) electrode with a nanocomposite containing ruthenium oxide (RuOx) nanoparticles and thionine (TH) or celestin blue (CB). The modified electrodes indicated excellent electrocatalytic activity toward persulfate reduction at a potential of +0.1 V. The proposed sensor showed detection limits of 1.46 µM for the GC/RuOx/TH modified electrode and 2.64 µM for the GC/RuOx/CB modified electrode. The sensitivities were obtained as 3 nA µM^?1 at a concentration range of 10 µM to 11 mM for the GC/RuOx/TH modified electrode and 1 nA µM^?1 at a concentration range of 10 µM to 6 mM for the GC/RuOx/CB modified electrodes.     

Polyethylenimine Functionalized Multi‐walled Carbon Nanotubes for Electrochemical Detection of Chromium(VI)

Multi‐walled carbon nanotubes (MWCNTs) functionalized with polyethylenimine (PEI) were synthesized and characterized by dispersibility, field‐emission scanning electron microscope (FE‐SEM), FT‐IR and thermogravimetric Analyzer (TGA). The glassy carbon electrodes modified by MWCNT‐PEI composite were used for sensitive and selective detection of chromium (VI). A linear response was obtained over a wide range of Cr(VI) concentrations (0.002–20 µmol L^?1) with the detection limit of 0.0006 µmol L^?1 (S/N=3). The proposed electrodes were used successfully for Cr(VI) detection in three real water samples.     

Immobilization of Xanthine Oxidase on Carbon Nanotubes Through Double Supramolecular Junctions for Biosensor Construction

A novel approach for the noncovalent functionalization of single‐walled carbon nanotubes with enzymes, using a β‐cyclodextrin‐modified pyrene derivative, mono‐6‐ethylenediamino‐(2‐pyrene carboxamido)‐6‐deoxy‐β‐cyclodextrin (Pyr‐βCD), as a molecular bridge for the construction of a supramolecular assembly between the nanotube surface and an adamantane‐modified enzyme, is reported. The Pyr‐βCD derivative was synthesized and its stacking to SWNT through π–π interactions accomplished. The functionalized nanotubes showed low capacity for the nonspecific adsorption of proteins, but were able to immobilize adamantane‐modified xanthine oxidase via host‐guest associations. This double supramolecular junctions‐based approach was employed to modify a glassy carbon electrode with the enzyme/nanotubes complex for designing a biosensor device toward xanthine. The biosensor showed fast electroanalytical response (10 s), high sensitivity (5.9 mA/M cm²) low detection limit (2 µM) and high stability.     

A Comparison of a Nanostructured Enzymeless Au/Fe2O3/MWCNTs/GCE Electrode and a GOx Modified One in Electrocatalytic Detection of Glucose

Acid functionalized multi‐walled carbon nanotubes (f‐MWCNTs) were decorated with Au and Fe₂O₃ nanoparticles (FeONPs) and deposited on glassy carbon electrode (GCE). The resulting hybrid Au/Fe₂O₃/f‐MWCNTs/GCE electrode and the one further modified by glucose oxidase were compared for detection of glucose. FeONPs and Au were deposited on the f‐MWCNTs by sonication‐assisted precipitation and deposition‐precipitation methods, respectively. The morphology and structure of the samples were characterized by transmission electron microscopy, scanning electron microscopy, X‐ray diffraction and Raman spectroscopy. A uniform distribution of FeONPs with an average size of 5 nm increased the surface area of functionalized nanotubes from 39 to 50 m²/g. The electrocatalytic glucose detection on the modified electrodes was evaluated using cyclic voltammetry and chronoamperometry in 0.1 M phosphate buffer solution at pH 7.0. The non‐enzymatic and enzymatic electrodes show sensitivity of 512.4 and 921.4 mA/mM.cm² and detection limit of 1.7 and 0.9 mM, respectively. The enzymatic and enzymeless electrodes retained more than 70 % and 80 % of their cathodic faradic current after 70 days, respectively. The sensing mechanism of the non‐enzymatic biosensor is described through the reaction of glucose with iron (III) ions, while in the case of enzymatic electrode, glucose is oxidized by glucose oxidase.     

Fabrication of Chitosan‐Multiwall Carbon Nanotube Nanocomposite Containing Ferri/Ferrocyanide: Application for Simultaneous Detection of D‐Penicillamine and Tryptophan

We report a simple and effective strategy for fabrication of the nanocomposite containing chitosan (CS) and multiwall carbon nanotube (MWNT) coated on a glassy carbon electrode (GCE). The characterization of the modified electrode (CS‐MWNT/GC) was carried out using scanning electron microscopy (SEM) and UV–vis absorption spectroscopy. The electrochemical behavior of CS‐MWNT/GC electrode was investigated and compared with the electrochemical behavior of chitosan modified GC (CS/GC), multiwalled carbon nanotube modified GC (MWNT/GC) and unmodified GC using cyclic voltammetry (CV) and electron impedance spectroscopy (EIS). The chitosan films are electrochemically inactive; similar background charging currents are observed at bare GC. The chitosan films are permeable to anionic Fe(CN)₆^3?/4? (FC) redox couple. Electrochemical parameters, including apparent diffusion coefficient for the Fe(CN)₆^3?/4? redox probe at FC/CS‐MWNT/GC electrode is comparable to values reported for cast chitosan films. This modified electrode also showed electrocatalytic effect for the simultaneous determination of D‐penicillamine (D‐PA) and tryptophan (Trp). The detection limit of 0.9 μM and 4.0 μM for D‐PA and Trp, respectively, makes this nanocomposite very suitable for determination of them with good sensitivity.     

Direct Electrochemistry of Multi‐Copper Oxidases at Carbon Nanotubes Noncovalently Functionalized with Cellulose Derivatives

This study describes the direct electron transfer of multi‐copper oxidases, i.e., laccase (from Trametes versicolor) and bilirubin oxidase (BOD, from Myrothecium verrucaria) at multiwalled carbon nanotubes (MWNTs) noncovalently functionalized with biopolymers of cellulose derivatives, i.e., hydroxyethyl cellulose (HEC), methyl cellulose (MC), and carboxymethyl cellulose (CMC). The functionalization of the MWNTs with the cellulose derivatives is found to substantially solubilize the MWNTs into aqueous media and to avoid their aggregation on electrode surface. Under anaerobic conditions, the redox properties of laccase and BOD are difficult to be defined with cyclic voltammetry at either laccase/MWNT‐modified or BOD/MWNT‐modified electrodes. The direct electron transfer properties of laccase and BOD are thus studied in terms of the bioelectrocatalytic activities of the laccase/MWNT‐modified and BOD/MWNT‐modified electrodes toward the reduction of oxygen and found to be facilitated at the functionalized MWNTs. The possible application of the laccase‐catalyzed O₂ reduction at the laccase/MWNT‐modified electrode is illustrated by constructing a CNT‐based ascorbate/O₂ biofuel cell with the MWNT‐modified electrode as the anode for the oxidation of ascorbate biofuel.     

N‐(3,4‐Dihydroxyphenethyl)‐3,5‐dinitrobenzamide‐Modified Multiwall Carbon Nanotubes Paste Electrode as a Novel Sensor for Simultaneous Determination of Penicillamine,Uric acid,and Tryptophan

N‐(3,4‐dihydroxyphenethyl)‐3,5‐dinitrobenzamide modified multiwall carbon nanotubes paste electrode was used as a voltammetric sensor for oxidation of penicillamine (PA), uric acid (UA) and tryptophan (TP). In a mixture of PA, UA and TP, those voltammograms were well separated from each other with potential differences of 300, 610, and 310 mV, respectively. The peak currents were linearly dependent on PA, UA and TP concentrations in the range of 0.05–300, 5–420, and 1.0–400 µmol L^?1, with detection limits of 0.021, 2.0, and 0.82 µmol L^?1, respectively. The modified electrode was used for the determination of those compounds in real samples.     

Carbon‐Based Electrodes for Sensitive Electroanalytical Determination of Aminonaphthalenes

The electroanalytical performance of bare glassy carbon electrodes (GCE) for the determination of 1‐aminonaphthalene (1‐AN) and 2‐aminonaphthalene (2‐AN) was compared with GCE modified by a Nafion permselective membrane or multiwalled carbon nanotubes and with other types of carbon‐based materials, carbon film and boron doped diamond. Nafion‐modified GCE gave the highest sensitivity and lowest detection limit (0.4 µmol L^?1) for differential pulse voltammetric determination of 1‐AN. Electrochemical impedance spectroscopy gave information about the processes at the electrode surface. Simultaneous determination of 1‐AN and 2‐AN in a mixture at GCE and their determination in model samples of river water is presented.     

Highly sensitive detection of silybin based on adsorptive stripping analysis at single-sided heated screen-printed carbon electrodes modified with multi-walled carbon nanotubes with direct current heating

A new disposable multi-walled carbon nanotubes modified single-sided heated screen-printed carbon electrode (MWNT/ss-HSPCE) was fabricated. The electrochemical behavior of silybin was investigated by cyclic voltammetry and the probable electrode reaction mechanism was proposed. A simple and cheap direct current heating supplier was used to heating the electrode for adsorptive accumulation of silybin. The square wave voltammetric stripping peak current of silybin at MWNT/ss-HSPCE with an elevated electrode temperature of 50 °C only during accumulation step was dramatically improved compared with that at bare single-sided heated screen-printed carbon electrode (ss-HSPCE) without heating. This enhancement was mainly contributed to the combination of the advantages of multi-walled carbon nanotubes and electrically heated electrodes. Under optimum conditions, two detection linear ranges of silybin were from 1.0 × 10⁻⁹ to 1.0 × 10⁻⁷ M and 3.0 × 10⁻⁷ to 1.0 × 10⁻⁶ M. A detection limit of 5.0 × 10⁻¹⁰ M could be obtained (S/N = 3), which was more than two magnitudes lower than that at bare ss-HSPCE without heating. To the best of our knowledge, this was also at least two magnitudes lower than any others for electrochemical detection of silybin in the literature. Finally, the method was successfully applied to the determination of silybin in pharmaceutical tablets.     

Synthesis of Iridium Oxide Nanotubes by Electrodeposition into Polycarbonate Template: Fabrication of Chromium(III) and Arsenic(III) Electrochemical Sensor

For the first time iridium oxide (IrO₂) nanotubes are synthesized by electrodeposition in a polycarbonate (PC) template. Potential cycling (90 cycles) between 0.0 and 0.9 V is used for the preparation of IrO_x nanotubes onto the PC template with a pore diameter of 100 nm. Field‐emission scanning electron microscopy (FESEM) images show, that IrO₂ nanotubes with uniform diameters of 110±10 nm and an estimated length of 1–3 µm are formed. The electrochemical properties and the electrocatalytic activity of a glassy carbon‐IrO_x nanotube modified electrode toward Cr³⁺ and As³⁺ oxidation are investigated. Finally, the modified electrode is used for micromolar detection of the proposed analytes using differential pulse voltammetry.     

DNA‐Directed Attachment of Carbon Nanotubes for Enhanced Label‐Free Electrochemical Detection of DNA Hybridization

Multi‐walled carbon nanotubes (MWNTs) were used as nanowires, which combined DNA molecules to a carbon paste electrode (CPE). The attachment of MWNT on the electrode surface was controlled by a hybridization assay between adenine and thymine containing oligonucleotides. The appearance of guanine oxidation signal after hybridization with target DNA greatly simplified the specific sequence DNA detection mechanism. Combination of sidewall‐ and end‐functionalization of MWNT provided a significant enhancement in the voltammetric signal of guanine oxidation in comparison with the signals obtained from only end‐oxidized MWNT modified CPE and a bare CPE. A control experiment involving adenine containing polynucleotide (poly(A)) instead of adenine probe modified MWNT was performed. The effect of target and noncomplementary DNA concentration on the guanine signal was also monitored. Discrimination against single‐base mismatch and noncomplementary DNA was achieved by surfactant containing washing solution. The promising conductivity of carbon nanotubes, and the creation of a larger surface area for DNA immobilization by sidewall‐ and end‐oxidation of MWNT provided a detection limit down to 10 pg/mL, which is compatible with the demand of the genetic tests.     

Electrochemical Behavior of K3[Fe(CN)6] on the Electrode Coated with Modified Multi‐Walled Carbon Nanotubes

The electrochemical behavior of K₃[Fe(CN)₆] was studied on an ITO electrode that was coated with β‐cyclodextrin (CD) modified multi‐walled carbon nanotubes (MWNTs) and with carboxyl modified multi‐walled carbon nanotubes (MWNT‐COOHs). MWNT‐COOHs showed an excellent electrocatalytic effect on the redox of K₃[Fe(CN)₆] while MWNT‐CDs had a subdued effect on the electrochemical response of K₃[Fe(CN)₆]. It is probably due to mismatching between K₃[Fe(CN)₆] and cyclodextrin, which hampers the contact of K₃[Fe(CN)₆] with carbon nanotubes. Moreover, the electrochemical behavior of K₃[Fe(CN)₆] on the MWNT‐COOHs coated ITO electrode at various scan rates also was measured. The results indicated that both potential difference between redox peaks and peak current of K₃[Fe(CN)₆] increased with increasing scan rate. A good linearity of peak current versus scan rate was observed.     

Sensitive Detection of NADH by Ferrocenylalkanethiol Functionalized Multiwall Carbon Nanotubes Electrodes

Abstract

The 6-ferrocenylhexanethiol (FcC₆SH) functionalized multiwall carbon nanotubes (MWNTs) modified glassy carbon electrode (FcC₆SH/MWNTs/GCE) was easily fabricated and used for the sensitive detection of NADH. Cyclic voltammetric and amperometric methods were used to study the behavior of NADH on the FcC₆SH/MWNTs/GCE. A broader linear response range to the NADH concentration from 5 µM to 1.5 mM with a correlation coefficient of 0.9982 was obtained. The detection limit was 0.54 µM. The synergetic effects of FcC₆SH and MWNTs make the modified electrode highly sensitive to NADH. In addition, the modified electrode can decrease the fouling of the electrode surface.     

Enhanced Electrocatalysis for the Reduction of Hydrogen Peroxide at New Multiwall Carbon Nanotube Grafted Polydiphenylamine Modified Electrode

A new modified electrode having multiwall carbon nanotube (MWNT) grafted with polydiphenylamine (PDPA) as electrocatalytic layer is fabricated. FESEM image of the modified electrode shows a different morphology indicating the grafting of PDPA over MWNT. This morphology is in quite contrast from the conventional bilayer MWNT/conducting polymer modified electrode. The multiwall carbon nanotube grafted polydiphenylamine (MWNT‐g‐PDPA‐ME) shows excellent electrocatalytic activity towards the reduction of hydrogen peroxide. The combined presence of MWNT and PDPA as a single unit provides better sensitivity than the bilayer configuration (MWNT/PDPA‐ME). This modified electrode shows accelerated electron transfer at the interface with minimized surface fouling and surface renewability. The advantages of MWNT‐g‐PDPA‐ME over the bilayer electrode are demonstrated with chronoamperometric studies. The amperometric response to H₂O₂ obtained at ?300 mV (vs. SCE) is rapid and highly sensitive as evident from the higher (2.83×10^?3 cm³ mol^?1 s^?1) rate constant for the diffusion reduction process.     

Electropolymerized Diphenylamine on Functionalized Multiwalled Carbon Nanotube Composite Film and Its Application to Develop a Multifunctional Biosensor

Diphenylamine (DPA) monomers have been electropolymerized on the amino‐functionalized multiwalled carbon nanotube (AFCNT) composite film modified glassy carbon electrode (GCE) by cyclic voltammetry (CV). The surface morphology of PDPA‐AFCNT was studied using field‐emission scanning electron microscopy (FE‐SEM). The interfacial electron transfer phenomenon at the modified electrode was studied using electrochemical impedance spectroscopy (EIS). The PDPA‐AFCNT/GCE represented a multifunctional sensor and showed good electrocatalytic behavior towards the oxidation of catechol and the reduction of hydrogen peroxide. Rotating‐disk electrode technique was applied to detect catechol with a sensitivity of 1360 µA mM^?1 cm^?2 and a detection limit of 0.01 mM. Amperometric determination of hydrogen peroxide at the PDPA‐AFCNT film modified electrode results in a linear range from 10 to 800 µM, a sensitivity of 487.1 µA mM^?1 cm^?2 and detection limit of 1 µM. These results show that the nano‐composite film modified electrode can be utilized to develop a multifunctional sensor.     

Direct Electrochemistry and Electrocatalysis of Hemoglobin on Aligned Carbon Nanotubes Based Electrodes Modified with Au Nanoparticles and SiO2 Gel

Here we report on the preparation and characterization of new electrodes based on aligned carbon nanotubes (ACNTs) for hemoglobin (Hb) electrochemistry and electrocatalysis. The ACNTs are obtained by a thermal chemical vapor deposition method under normal pressure. Then the electrodes are elaborated by first sputtering a thin Au film (thickness of 200 nm) onto the top of the ACNTs, and then removing the Au layer/ACNTs from the quartz substrate with the aide of hydrofluoric acid (HF) treatment. Field emission scanning electron microscopy (FESEM) demonstrates that after nitric acid (HNO₃) treatment, the nanotubes of the removed Au layer are totally tip‐opened, purified and organized in a perfect vertically aligned architecture. The final ACNTs electrode is obtained by attaching the Au layer of ACNTs onto a glassy carbon electrode. Then the electrode was modified to act as a matrix for hemoglobin (Hb) immobilization and as an electrode for Hb electroanalysis by the assistance of Au nanoparticles (AuNPs) and SiO₂ gel. Due to the individual specific effects of AuNPs, SiO₂ gel and ACNTs, the resulting SiO₂/Hb‐AuNPs/ACNTs electrode showed good direct electrochemistry of Hb with an apparent Michaelis? Menten constant of 0.44 mM. The electrode showed an excellent electrocatalytic activity towards H₂O₂, possessing a linear range from 40 µM to 4 mM and the detection limit was 22 µM based on a signal to noise ratio of 3.     

Simultaneous Determination of Hydroquinone and Catechol at a Glassy Carbon Electrode Modified with Multiwall Carbon Nanotubes

A simply and high selectively electrochemical method for simultaneous determination of hydroquinone and catechol has been developed at a glassy carbon electrode modified with multiwall carbon nanotubes (MWNT). It was found that the oxidation peak separation of hydroquinone and catechol and the oxidation currents of hydroquinone and catechol greatly increase at MWNT modified electrode in 0.20 M acetate buffer solution (pH 4.5). The oxidation peaks of hydroquinone and catechol merge into a large peak of 302 mV (vs. Ag/AgCl, 3 M NaCl) at bare glassy carbon electrode. The two corresponding well‐defined oxidation peaks of hydroquinone in the presence of catechol at MWNT modified electrode occur at 264 mV and 162 mV, respectively. Under the optimized condition, the oxidation peak current of hydroquinone is linear over a range from 1.0×10^?6 M to 1.0×10^?4 M hydroquinone in the presence of 1.0×10^?4 M catechol with the detection limit of 7.5×10^?7 M and the oxidation peak current of catechol is linear over a range from 6.0×10^?7 M to 1.0×10^?4 M catechol in the presence of 1.0×10^?4 M hydroquinone with the detection limit of 2.0×10^?7 M. The proposed method has been applied to simultaneous determination of hydroquinone and catechol in a water sample with simplicity and high selectivity.