An Electrochemical DNA Sensor Based on Electrodepositing Aluminum Ion Films on Stearic Acid‐Modified Carbon Paste Electrode and Its Application for the Detection of Specific Sequences Related to Bar Gene and CP4 Epsps Gene

An electrochemical DNA biosensor was fabricated by immobilizing DNA probe on aluminum ion films that were electrodeposited on the surface of the stearic acid‐modified carbon paste electrode (CPE). DNA immobilization and hybridization were characterized with cyclic voltammetry (CV) by using methylene blue (MB) as indicator. MB has a couple of well‐defined voltammetric redox peaks at the CPE. The currents of redox peaks of MB decreased after depositing aluminum ion films on the CPE (Al(III)/CPE) and increased dramatically after immobilizing DNA probe (ssDNA/Al(III)/CPE). Hybridization of DNA probe led to a marked decrease of the peak currents of MB, which can be used to detect the target single‐stranded DNA. The conditions for the preparation of Al(III)/CPE, and DNA immobilization and hybridization were optimized. The specific sequences related to bar transgene in the transgenic corn and the PCR amplification of CP4 epsps gene from the sample of transgenic roundup ready soybean were detected by differential pulse voltammetry (DPV) with this new electrochemical DNA biosensor. The difference between the peak currents of MB at ssDNA/Al(III)/CPE and that at hybridization DNA modified electrode (dsDNA/Al(III)/CPE) was applied to determine the specific sequence related to the target bar gene with the dynamic range comprised between 1.0×10^?7 mol/L to 1.0×10^?4 mol/L. A detection limit of 2.25×10^?8 mol/L of oligonucleotides can be estimated.     

Voltammetric determination of DNA hybridization using methylene blue and self-assembled alkanethiol monolayer on gold electrodes

An electrochemical DNA biosensor based on the recognition of single stranded DNA (ssDNA) by hybridization detection with immobilized complementary DNA oligonucleotides is presented. DNA and oligonucleotides were covalently attached through free amines on the DNA bases using N-hydroxysulfosuccinimide (NHS) and N-(3-dimethylamino)propyl-N′-ethylcarbodiimide hydrochloride (EDC) onto a carboxylate terminated alkanethiol self-assembled monolayers (SAM) preformed on a gold electrode (AuE). Differential pulse voltammetry (DPV) was used to investigate the surface coverage and molecular orientation of the immobilized DNA molecules. The covalently immobilized probe could selectively hybridize with the target DNA to form a hybrid on the surface despite the bases being attached to the SAM. The changes in the peak currents of methylene blue (MB), an electroactive label, were observed upon hybridization of probe with the target. Peak currents were found to increase in the following order: hybrid-modified AuE, mismatched hybrid-modified AuE, and the probe-modified AuE which indicates the MB signal is determined by the extent of exposed bases. Control experiments were performed using a non-complementary DNA sequence. The effect of the DNA target concentration on the hybridization signal was also studied. The interaction of MB with inosine substituted probes was investigated. Performance characteristics of the sensor are described.     

Electrochemical DNA biosensor for the detection of TT and Hepatitis B virus from PCR amplified real samples by using methylene blue

DNA biosensors based on nucleic acid hybridization processes are rapidly being developed towards the goal of rapid and inexpensive diagnosis of genetic and infectious diseases. Electrochemical transducers are often being used for detecting the DNA hybridization event, due to their high sensitivity, small dimensions, low cost, and compatibility with microfabrication technology. In this study, an electrochemical biosensor for the voltammetric detection of DNA sequences related to the Hepatitis B virus (HBV) and TT virus (TTV) from polymerase chain reaction (PCR) amplified real samples is described for the first time. The biosensor relies on the immobilization of the 21- or 24-mer single stranded oligonucleotides (probe) related to the HBV and TTV sequences and hybridization of these oligonucleotides with their complementary sequences (target) at carbon paste electrode (CPE). The extent of hybridization between the probe and target sequences was determined by using square wave voltammetry (SWV) with moving average baseline correction and methylene blue (MB) as the hybridization indicator. As a result of the interaction between MB and the bound guanine bases of hybrid at CPE surface, the MB signal decreased, when it was compared with the MB signal, which was observed with probe modified CPE. The difference between the MB signals, obtained from the hybrid modified and the probe modified CPE is used to detect the DNA sequences of the infectious diseases from PCR amplified real samples. Numerous factors affecting the target hybridization and indicator binding reactions are optimized to maximize the sensitivity.     

Electrochemical genosensor for the detection of interaction between methylene blue and DNA

Described here are the chronocoulometric and voltammetric parameters for methylene blue [3,7-bis(dimethylamino)phenothiazin-5-ium chloride, MB] on binding to DNA at carbon paste electrode (CPE) surface. MB, which interacts with the immobilized calf thymus DNA was detected by using single stranded DNA modified CPE (ssDNA modified CPE), bare CPE and double stranded DNA modified CPE (dsDNA modified CPE) in combination with chronocoulometry and differential pulse voltammetry (DPV) techniques. The effect of ionic strength to the behavior of MB with dsDNA and ssDNA was also studied by means of voltammetry. These results demonstrated that MB could be used as an effective electroactive hybridization indicator for DNA biosensors. Performance characteristics of the sensor are described, along with future prospects.     

Determination of DNA Hypermethylation Using Anti‐cancer Drug‐Temozolomide

An electrochemical drug‐DNA biosensor was developed for the detection of interaction between the anti‐cancer drug, Temozolomide (TMZ), and DNA sequences by using Differential Pulse Voltammetry at the graphite electrode surfaces. TMZ is a pro‐drug and an alkylating agent that crosses the blood‐brain barrier, so it is mainly used for brain cancers treatment. In this study, we aim to develop a‐proof‐of‐concept study to investigate the effect of TMZ on formerly methylated DNA sequences since TMZ shows its anti‐cancer activity by methylating the DNA. Interaction between TMZ and DNA causes localized distortion of DNA away from an idealized B‐form, resulting in a wider major groove and greater steric accessibility of functional groups in the base of the groove. According to the results, TMZ behaves as a ‘hybridization indicator’ because of its different electrochemical behavior to different strands of DNA. After interaction with TMZ, hybrid (double stranded DNA‐dsDNA) signals decreased dramatically whereas probe (single stranded DNA‐ssDNA) and control signals remain almost unchanged. The signal differences enabled us to distinguish ssDNA and dsDNA without using a label or tag. It is the first study to demonstrate the interaction between the TMZ and dsDNA created from probe and target. We use specific oligonucleotides sequences instead of using long dsDNA sequences.     

ssDNA/十八酸修饰碳糊电极的制备及伏安法表征

将石墨粉与十八酸在80 ℃下混合制成表面富含—COOH的基底碳糊电极(SA/CPE), 然后在活化剂N-羟基琥珀酰亚胺(NHS)和1-乙基-3-(3-二甲基氨丙基)碳二亚胺盐酸盐(EDC)存在下将ssDNA固定到电极表面制备ssDNA修饰电极(ssDNA/SA/CPE). 以亚甲基蓝(MB)为指示剂, 用循环伏安法对SA/CPE和ssDNA/SA/CPE进行电化学表征, 发现其在ssDNA/SA/CPE上较在SA/CPE上的氧化峰电流(i_pa)和还原峰电流(i_pc)分别增大1.9倍和1.7倍, 式电势(E_f)负移8 mV. 把ssDNA/SA/CPE放在互补ssDNA溶液中杂交后, MB的i_pa 和i_pc较在SA/CPE上分别增大1.0倍和0.8倍, E_f负移18 mV. 用0.5 mol/L 的NaOH溶液冲洗使电极表面杂交而成的dsDNA变性洗脱, MB的伏安信号几乎与在ssDNA/SA/CPE上一样. i_pc与SA/CPE上固定的ssDNA质量在1.0×10^－7～5.0×10^－6 g范围内成线性关系, 检测限为2.0×10^－9 g (S/N＝3). 这种既廉价又灵敏的电化学生物传感器有望在转基因植物产品检测研究中得到应用.     

Modeling of DNA hybridization detection using methylene blue as an electroactive label

Mathematical modeling of methylene blue (MB) signal in ssDNA and dsDNA on pencil graphite electrode is described. A DNA biosensor was developed based on MB signal. The probe and target DNAs were 20 mer oligonucleotides corresponding to consensus sequence of HPV major capsid protein L1 gene. Hybrids of various complementary and non-complementary oligonucleotides with the probe were considered as dsDNA with different hybridization degrees. Modeling was developed by incorporation of only the stable forms of dsDNA hybrids. Effect of hybridization degree on current signal in various forms was studied. A factor named AHP (Average Hybridization Percentage) for verifying the hybridization events was defined. Results showed that there is a significant mathematical relation between the calculated AHP and MB signals.     

Impedance‐Based DNA Biosensor Employing Molecular Beacon DNA as Probe and Thionine as Charge Neutralizer

In this paper, we present an impedance‐based DNA biosensor using thionine intercalation to amplify DNA hybridization signal. Beacon single‐stranded DNA (ssDNA) probe and mercaptoacetic acid were self‐assembled onto a Au electrode by forming Au? S bonds. These beacon ssDNAs were hybridized with the complementary sequences around the loop structure. Then thionine was intercalated into the double‐stranded DNA (dsDNA) immobilized on the Au electrode surface. Due to the neutralization of the negative charges of dsDNA by the intercalated thionine, the electronic transfer resistance (R_et) of the DNA modified Au electrode was significantly diminished. Herein, the decreased value of R_et resulted from the thionine intercalating into dsDNA was employed as the hybridization signal. SDS was used to reduce the unspecific adsorption between ssDNA and thionine. Several experimental conditions, including the surface coverage of ssDNA probe on Au electrode, the hybridization temperature and time were all optimized. Moreover, the hybridization reactions of the unstructured linear ssDNA probe and the structured beacon ssDNA probe with their complementary sequences were compared in this work. The sensitivity of the presented DNA biosensor highlighted that the intercalation of thionine into dsDNA was an efficient approach to amplify the hybridization signal using impedance detection technique. Additionally, in this DNA biosensing protocol, beacon ssDNA has a good ability to distinguish target DNA sequences. This results in a higher specificity than using traditional unstructured DNA probe.     

DNA and PNA sensing on mercury and carbon electrodes by using methylene blue as an electrochemical label

Described here are the electrochemical parameters for MB on binding to DNA at hanging mercury drop electrode (HMDE), glassy carbon electrode (GCE), and carbon paste electrode (CPE) in the solution and at the electrode surface. MB, which interacts with the immobilized calf thymus DNA, was detected by using single-stranded DNA-modified HMDE or CPE (ssDNA-modified HMDE or CPE), bare HMDE or CPE, and double-stranded DNA-modified HMDE or CPE (dsDNA-modified HMDE or CPE) in combination with adsorptive transfer stripping voltammetry (AdTSV), differential pulse voltammetry (DPV), and alternating current voltammetry (ACV) techniques. The structural conformation of DNA and hybridization between synthetic peptide nucleic acid (PNA) and DNA oligonucleotides were determined by the changes in the voltammetric peak of MB. The PNA and DNA probes were also challenged with excessive and equal amount of noncomplementary DNA and a mixture that contained one-base mismatched and target DNA. The partition coefficient was also obtained from the signal of MB with probe, hybrid, and ssDNA-modified GCEs. The effect of probe, target, and ssDNA concentration upon the MB signal was investigated. These results demonstrated that MB could be used as an effective electroactive hybridization indicator for DNA biosensors. Performance characteristics of the sensor are described, along with future prospects.     

以乙二胺为手臂分子制备的DNA修饰电极及其伏安性能

Carboxyl was formed on the surface of glassy carbon electrode(GCE) by electrochemical oxidation. Ethylenediamine(En) was used as the arm molecule to link carboxyl with dsDNA using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDC) and N- hydroxysuccinimide (NHS) as the activators to prepare dsDNA modified electrode(dsDNA/En/GCE). It was shown that dsDNA couM be covalently immobilized on the surface of GCE. ssDNA modified electrode(ssDNA/En/GCE) was obtained via the thermal denaturation of dsDNA/En/GCE. The dsDNA/En/GCE and ssDNA/En/GCE were characterized by voltammetry with methylene blue(MB) as the indicator. The results indicated that the currents of the redox peaks of MB at ssDNA/En/GCE were larger than those at dsDNA/En/GCE, and the currents of the redox peaks at En/GCE were the smallest. The peak-currents of MB at the DNA modified electrode had good reproducibility after multi-denaturation and hybridization cycles.     

Label‐Free Bioelectronic Detection of Point Mutation by Using Peptide Nucleic Acid Probes

An electrochemical hybridization biosensor based on peptide nucleic acid (PNA) probes with a label‐free protocol is described. The detection of PNA‐DNA and DNA‐DNA hybridizations were accomplished based on the oxidation signal of guanine by using differential pulse voltammetry (DPV) at carbon paste electrode (CPE). It was observed that the oxidation signals of guanine obtained from the PNA and DNA probe modified CPEs were higher than those obtained from the PNA‐DNA and DNA‐DNA hybrid modified CPEs due to the accessible unbound guanine bases. The detection of hybridization between PNA probe and point mutation containing DNA target sequences was clearly observed due to the difference of the oxidation signals of guanine bases, because the point mutation was guanine nearly at the middle of the sequence. The effect of the DNA target concentration on the hybridization signal was also observed. The PNA probe was also challenged with excessive and equal amount of noncomplementary DNA and also mixtures of point mutation and target DNA.     

Electrochemical detection of DNA hybridization using methylene blue and electro-deposited zirconia thin films on gold electrodes

A novel electrochemical DNA biosensor based on methylene blue (MB) and zirconia (ZrO₂) thin films modified gold electrode for DNA hybridization detection is presented. Zirconia thin films were electrodynamically deposited onto the bare gold electrode in an aqueous electrolyte of ZrOCl₂ and KCl by cycling the potential between −1.1 and +0.7 V (versus Ag/AgCl) at a scan rate of 20 mV s⁻¹. Oligonucleotide probes with phosphate group at the 5′ end were attached onto the zirconia thin films because zirconia is affinity for phosphoric group. The surface density of the immobilized DNA molecules at the zirconia interface was investigated by fluorescence spectroscopy method. Hybridization was induced by exposure of the ssDNA-containing Au electrode to complementary ssDNA in solution. The decreases in the peak currents of MB, an electroactive label, were observed upon hybridization of probe with the target. The cathodic peak current (i_p) of MB after hybridization with the target DNA was linearly related to the logarithmic value of the target DNA concentration ranging from 2.25×10⁻¹⁰ to 2.25×10⁻⁸ mol l⁻¹. A detection limit of 1.0×10⁻¹⁰ mol l⁻¹ of oligonucleotides can be estimated.     

Lable‐Free Electrochemical DNA Sensor Based on Gold Nanoparticles/Poly(neutral red) Modified Electrode

We present a new strategy for the label‐free electrochemical detection of DNA hybridization based on gold nanoparticles (AuNPs)/poly(neutral red) (PNR) modified electrode. Probe oligonucledotides with thiol groups at the 5‐end were covalently linked onto the surface of AuNPs/PNR modified electrode via S‐Au binding. The hybridization event was monitored by using differential pulse voltammetry (DPV) upon hybridization generates electrochemical changes at the PNR‐solution interface. A significant decrease in the peak current was observed upon hybridization of probe with complementary target ssDNA, whereas no obvious change was observed with noncomplementary target ssDNA. And the DNA sensor also showed a high selectivity for detecting one‐mismatched and three‐mismatched target ssDNA and a high sensitivity for detecting complementary target ssDNA, the detection limit is 4.2×10^?12 M for complementary target ssDNA. In addition, the DNA biosensor showed an excellent reproducibility and stability under the DNA‐hybridization conditions.     

Voltammetric Studies on the Recognition of a Copper Complex to Single‐ and Double‐Stranded DNA and Its Application in Gene Biosensor

A mixed‐ligands copper complex [Cu(phendione)(DAP)]SO₄ (phendione=1,10‐phenanthroline‐5,6‐dione, DAP=2,3‐diaminophenazine) was synthesized. Cyclic voltammetry showed that the complex underwent an obvious decrease of redox peak currents and positive shift of formal potential after interaction with double‐stranded DNA (dsDNA), suggesting that the copper complex behaved as a typical metallointercalator for dsDNA, The recognition properties of the copper complex to single‐stranded DNA (ssDNA) and dsDNA were assessed using surface‐based electrochemical methods and the results suggested that the complex had obviously different redox signals at ssDNA and dsDNA modified electrodes. The copper complex was further used as an electroactive indicator for the detection of cauliflower mosaic virus (CaMV) 35S promoter gene.     

Preparation of Luminol-doped Nanoparticle and Its Application in DNA Hybridization Analysis

Introduction The analysis of DNA sequence and DNA mutant detection play fundamental roles in the rapid development of molecular diagnostics and in the anticancer drug screening. Therefor many detection techniques of DNA sequence have been developed in recent years. These techniques mainly depend on the nucleic acid hybridization1 and their sensitivities are related to the specific activity of the label linked to the DNA probe. The degree of hybridization of probe to its complementary DN…     

电化学石英晶体微天平实时表征和定量检测短序列DNA

利用电化学石英晶体微天平(EQCM)这一灵敏的质量和电化学传感器测定特定序列DNA。应用自组装膜技术在压电石英晶振表面自组装一带羧基的α－硫辛酸单层膜,通过盐酸1-乙基-3-(3-二甲基氨基丙基)碳二亚胺(EDC)及N-羟基琥珀酰亚胺(NHS)共价固化寡聚核苷酸为探针,用于测定与其碱基序列互补的DNA。实验中EQCM实时监测了α-硫辛酸的自组装过程、探针固化过程及其与cDNA杂交过程。定量得出了探针固化量及cDNA杂交量。在酸性、中性和碱性条件下,分别对固化和杂交过程进行表征,实验发现探针固化及DNA杂交都受pH影响,本文对此现象进行了解释。同时,利用染料Hoechst33258的电化学活性,使其与双链DNA嵌合,通过测量Hoechst33258的电化学信息进一步验证了DNA杂交关键步骤。     

Determination of Electrochemical Interaction between 2‐(1H‐benzimidazol‐2‐yl) Phenol and DNA Sequences

A benzimidazole derivate, 2‐(1H‐benzimidazol‐2‐yl) phenol (2‐Bip) and its interaction mechanism with sequence specific DNA was examined with Differential Pulse Voltammetry (DPV). We, for the first time, investigated the effect of 2‐Bip on sequence specific DNA with electrochemical methods by evaluating both guanine and 2‐Bip oxidation signal changes. In the study, probe sequences were immobilized to the surface of the electrodes and then hybridization was achieved by sending the complementary target onto the probe modified electrodes. Following the hybridization, 2‐Bip solution was interacted with probe and hybrid sequences to see the effect of 2‐Bip on different DNA sequences. The binding constant (K), toxicity (S%) and thermodynamic parameters, i. e., Gibbs free energy (ΔG°) of 2‐Bip‐DNA complexes were evaluated. K was calculated as 5×10⁵ and the change in the ΔG° was found as ?32.50 kJ mol^?1, which are consistent well with the literature. Furthermore, S% showed that 2‐Bip is moderately toxic to single stranded DNA (ssDNA) and toxic to double stranded DNA (dsDNA). From our experimental data, we made four conclusions (i) 2‐Bip affects both ssDNA and dsDNA, (ii) 2‐Bip interaction mode with DNA could be non‐covalent interactions, (iii) 2‐Bip could be used as new DNA hybridization indicator due to its distinct effects on ssDNA and dsDNA, (iv) 2‐Bip could be used as a drug molecule for its DNA effect.     

Detection of short oligonucleotide sequences using an electrochemical DNA hybridization biosensor

An electrochemical DNA hybridization biosensor was developed for the detection of DNA hybridization using MDB and proflavine as electrochemical labels. The biosensor was based on the interaction of 7-dimethyl-amino-1,2-benzophenoxazi-nium Meldola’s Blue (MDB) and proflavine with double stranded DNA (dsDNA) The electrochemical behaviour of MDB and proflavine as well as its interaction with double stranded (dsDNA) were investigated by cyclic (CV) and square wave voltammetry (SWV) and screen printed electrodes (ScPE). Furthermore, DNA-hybridization biosensors were developed for the detection of hybridization between oligonucleotides, which was detected by studying changes in the voltammetric peaks of MDB (reduction peak at −0.251 V) and proflavine (reduction peak at 0.075 V). MDB and proflavine were found to intercalate between the base pairs of dsDNA and oligonucleotides. Several factors affecting the dsDNA or oligonucleotides immobilization, hybridization and indicator preconcentration and interaction time, were investigated. As a result of the interaction of MDB with dsDNA and hybridized oligonucleotides, the voltammetric signals of MDB increased. Furthermore, guanine’s oxidation peak (at 0.901 V) was decreased as MDB’s concentration was increased. As a result of the interaction of proflavine with dsDNA and hybridized oligonucleotides, the voltammetric signals of proflavine decreased. These results were similar for carbon paste and screen printed electrodes. A comparison of the performance between CPE and ScPE was done. Our results showed that lower concentrations of MDB and proflavine were detected using screen printed electrodes. Moreover, reproducibility was better using screen printed electrodes and the detection was faster (regarding the experimental steps), but they are more cost effective.      

Investigation of Metal Ion Effect on Specific DNA Sequences and DNA Hybridization

In this article, we investigated the sequence specific interaction of single (ssDNA) and double stranded (dsDNA) with silver ions (Ag⁺) with electrochemical methods. We, for the first time, examined the effect of base sequences, base content and physiochemical properties of different DNA sequences on interaction with Ag⁺ in detail. We used different base contents to show how the composition of nucleic acid influences the electrochemical signals. We first immobilized ssDNA probes on bare graphite electrodes. Then, we showed the sequence effect on oxidation signals of AgDNA complex by sensing Ag⁺ to the probe coated surfaces to interact with different ssDNA sequences. Furthermore, we investigated the effect of Ag⁺ on dsDNA. We measured the oxidation signals obtained from Ag⁺‐ssDNA and Ag⁺‐dsDNA complex at approximately 0.2 V and 1.0 V (vs Ag/AgCl), respectively with Differential Pulse Voltammetry (DPV). We showed that the oxidation signals of the AgDNA complex obtained from dsDNA‐modified electrodes is higher than the electrodes modified with ssDNA. More importantly, we showed that Ag⁺‐ssDNA and Ag⁺ ion‐dsDNA exhibit different electrochemical behaviors.     

Development of a Novel Electrochemical Biosensor for Detection and Discrimination of DNA Sequence and Single Base Mutation in dsDNA Samples Based on PNA‐dsDNA Hybridization – a new Platform Technology

In spite of the extensive attention paid on the development of various DNA detection strategies, very few studies have been reported regarding direct detection of DNA sequence and mutation in dsDNA. Here, we describe the feasibility of detection and discrimination of target DNA sequences and single base mutations (SBM) directly in double‐stranded oligonucleotides and PCR products without the need for denaturation of the target dsDNA samples. This goal was achieved by employing a peptide nucleic acid (PNA) chain, self‐assembled on the gold electrode as a probe, which binds to dsDNA and forms PNA‐dsDNA hybrid.