A disposable impedance sensor for electrochemical study and monitoring of adhesion and proliferation of K562 leukaemia cells

A polyaniline-modified screen-printed carbon electrode (PANI/SPCE) was prepared by electropolymerization for the construction of a novel disposable cell impedance sensor. The conductive polymer improved greatly the electron transfer of SPCE and was very effective for cell immobilization. The adhesion of cells increased the electron transfer resistance (R_et) of redox probe on the PANI/SPCE surface, producing an impedance sensor for K562 leukaemia cells with a semilogarithm linear range from 10⁴ to 10⁷ cells ml⁻¹ and a limit of detection of 8.32 × 10³ cells ml⁻¹ at 10σ. The proliferation of cells on the conductive polymer increased the R_et, leading to a novel way to monitor the growth process of cells on the PANI/SPCE. The electrochemical monitoring indicated K562 leukaemia cells cultured in vitro on the PANI surface were viable for 60 h, consistent with the analysis from microscopic imaging and MTT assay. This method for monitoring the surface proliferation and detecting the number of viable cells was simple, low-cost and disposable, thus providing a convenient avenue for electrochemical study of cell immobilization, adhesion, proliferation and apoptosis.     

Mucin 4 detection with a label-free electrochemical immunosensor

Mucin 4 (MUC4) is a useful biomarker for endometriosis and cancers of the pancreas, esophagus and breast. The very first electrochemical immunosensor for the detection of MUC4 is reported, using carbon-based screen-printed electrodes modified by reaction with the diazonium salt of p-aminophenylacetic acid. Electrochemical impedance spectroscopy and cyclic voltammetry were used to characterize and optimize the electrografting process. The in situ surface modification through diazotation with phenylacetic groups enables the chemical binding of the specific antibody, followed by its affinity reaction with MUC4. The immunosensor was optimized with respect to several parameters and is very promising for clinical applications, having a limit of detection of 0.33 μg mL^− 1 and a linear domain between 1 and 15 μg mL^− 1 obtained by electrochemical impedance spectroscopy measurements.     

Selective determination of drug resistant cancer cells on indium tin oxide electrode modified with nano titanium dioxide

A new electrochemical cell sensor, with low cost, simple fabrication, high selectivity and sensitivity was developed in this study. Titanium dioxide nanoparticles (nano-TiO₂) were assembled on the disposable indium tin oxide (ITO) electrodes for the immobilization of the drug sensitive leukemia K562/B.W. cells and drug resistant leukemia K562/ADM cells to fabricate the relative cell sensors. The different electrochemical behaviors of the probe allowed us to differentiate one type of leukemia cells from another. Furthermore, the results of electrochemical impedance spectroscopy indicated that the detection limit of the new cell sensor is 1.3 × 10³ cells ml^?1 with a linear range of 1.6 × 10⁴ to 1.0 × 10⁷ cells ml^?1. These results suggested the promising application of this nano-TiO₂ interface to construct the non-labeling potential-discriminative cell biosensors for clinical uses.     

Photo-induced degradation of some flavins in aqueous solution

The blue-light induced photo-degradation of FMN, FAD, riboflavin, lumiflavin, and lumichrome in aqueous solution at pH 8 is studied by measurement of absorption coefficient spectral changes due to continuous excitation at 428 nm. The quantum yields of photo-degradation determined are ϕ_D(riboflavin, pH 8) ≈ 7.8 × 10⁻³, ϕ_D(FMN, pH 5.6) ≈ 7.3 × 10⁻³, ϕ_D(FMN, pH 8) ≈ 4.6 × 10⁻³, ϕ_D(FAD, pH 8) ≈ 3.7 × 10⁻⁴, ϕ_D(lumichrome, pH 8) ≈ 1.8 × 10⁻⁴, and ϕ_D(lumiflavin, pH 8) ⩽ 1.1 × 10⁻⁵. In a mass-spectroscopic analysis, the photo-products of FMN dissolved in water (solution pH is 5.6) were identified to be lumichrome and the lumiflavin derivatives dihydroxymethyllumiflavin, formyllumiflavin, and lumiflavin-hydroxy-acetaldehyde. An absorption and emission spectroscopic characterisation of the primary photoproducts of FMN at pH 8 is carried out.     

Kinetics of the diazotization and azo coupling reactions of procaine in the micellar media

The kinetics of the diazotization reaction of procaine in the presence of anionic micelles of sodium dodecyl sulfate (SDS) and cationic micelles of cetyltrimethyl ammonium bromide (CTAB), dodecyltrimethyl ammonium bromide (DDTAB) and tetradecyltrimethyl ammonium bromide (TDTAB) were carried out spectrophotometrically at λ_max = 289 nm. The values of the pseudo first order rate constant were found to be linearly dependent upon the [NaNO₂] in the concentration range of 1.0 × 10⁻³ mol dm⁻³ to 12.0 × 10⁻³ mol dm⁻³ in the presence of 2.0 × 10⁻² mol dm⁻³ acetic acid. The concentration of procaine was kept constant at 6.50 × 10⁻⁵ mol dm⁻³. The addition of the cationic surfactants increased the reaction rate and gave plateau like curve. The addition of SDS micelles to the reactants initially increased the rate of reaction and gave maximum like curve. The maximum value of the rate constant was found to be 9.44 × 10⁻³ s⁻¹ at 2.00 × 10⁻³ mol dm⁻³ SDS concentration. The azo coupling of diazonium ion with β-naphthol (at λ_max = 488) nm was found to linearly dependent upon [ProcN₂⁺] in the presence of both the cationic micelles (CTAB, DDTAB and TDTAB) and anionic micelles (SDS). Both the cationic and anionic micelles inhibited the rate of reactions. The kinetic results in the presence of micelles are explained using the Berezin pseudophase model. This model was also used to determine the kinetic parameters e.g. k_m, K_s from the observed results of the variation of rate constant at different [surfactants].     

Selective determination of uric acid with DNA doped polymers modified carbon fiber microelectrode

New biocomposite materials, based on the incorporation of DNA doped p-aminobenzensulfonic acid, was fabricated by electrochemical method. A carbon fiber microelectrode modified by this thin film was fabricated for selective determination of uric acid (UA) in the presence of a larger amount of ascorbic acid (AA). It was found that the voltammetric oxidation peak separation between UA and AA is about 260 mV at the modified electrode. A linear response of the peak current versus the concentration was found in the range of 8 × 10⁻⁷–6 × 10⁻⁴ M with correlation coefficient of 0.9991 and the detection limit was 5 × 10⁻⁷ M (s/n = 3) at the 5 × 10⁻⁴ M AA. The presence of high concentration AA did not interference the determination. The electropolymerized film was characterized by SEM techniques. The modified electrode shows good sensitivity, selectivity and stability.     

Simultaneous determination of acetaminophen,dopamine and ascorbic acid using a PbS nanoparticles Schiff base-modified carbon paste electrode

A highly sensitive method was investigated for the simultaneous determination of acetaminophen (AC), dopamine (DA), and ascorbic acid (AA) using a PbS nanoparticles Schiff base-modified carbon paste electrode (PSNSB/CPE). Differential pulse voltammetry peak currents of AC, DA and AA increased linearly with their concentrations within the ranges of 3.30 × 10⁻⁸–1.58 × 10⁻⁴ M, 5.0 × 10⁻⁸–1.2 × 10⁻⁴ M and 2.50 × 10⁻⁶–1.05 × 10⁻³ M, respectively, and the detection limits for AC, DA and AA were 5.36 × 10⁻⁹, 2.45 × 10⁻⁹ and 1.86 × 10⁻⁸ M, respectively. The peak potentials recorded in a phosphate buffer solution (PBS) of pH 4.6 were 0.672, 0.390, and 0.168 V (vs Ag/AgCl) for AC, DA and AA, respectively. The modified electrode was used for the determination of AC, DA, and AA simultaneously in real and synthetic samples.     

A time-resolved study of the multiphase chemistry of excited carbonyls: Imidazole-2-carboxaldehyde and halides

Imidazole-2-carboxaldehyde (IC) reactivity in the presence of halide anions (Cl^–, Br^–, I^–) has been studied by laser flash photolysis in aqueous solution at room temperature. The absorption spectrum of the triplet state of IC has been measured with a maximum absorption at 330 nm and a weaker absorption band around 650 nm. Iodide anions proved to be efficient quenchers of the triplet state IC, with a rate coefficient k_q of (5.33 ± 0.25) × 10⁹ M⁻¹ s⁻¹. Quenching by bromide and chloride anions was less efficient, with k_q values of (6.27 ± 0.53) × 10⁶ M⁻¹ s⁻¹ and (1.31 ± 0.16) × 10⁵ M⁻¹ s⁻¹, respectively. The halide (X^–) quenches the triplet state; the resulting transient absorption feature matches that of the corresponding radical anion (X₂^–). We suggest that this type of quenching reactions is a driving force of oxidation reactions in the oceanic surface microlayer (SML) and a source of halogen atoms in the atmosphere.     

The determination of cysteine at Bi-powder carbon paste electrodes by cathodic stripping voltammetry

The determination of cysteine by means of square wave cathodic stripping voltammetry (SWCSV) is reported here for the first time at Bi-modified carbon paste electrodes (CPEs). The modified electrodes are 17% w/w metallic Bi powder mixed with CP (Bi-CPEs) and the technique is based on the enhancement of Bi surface oxidation in the presence of cysteine at a carefully chosen accumulation potential and the subsequent reduction-stripping of the product (proposed to be bismuth(III) cysteinate) by potential scanning to more negative values. The wide concentration range of 1 × 10⁻⁶–5 × 10⁻⁵ M for cysteine can be assessed by SWCSV using Bi-CPEs and, by appropriate choice of accumulation times, two linear response concentration regimes could be identified: 1 × 10⁻⁶–1 × 10⁻⁵ M (accumulation for 600 s) and 1 × 10⁻⁵–5 × 10⁻⁵ M (accumulation for 100 s), with estimated detection limits of 3 × 10⁻⁷ and 2 × 10⁻⁶ M, respectively.     

A disposable amperometric enzyme immunosensor for rapid detection of Vibrio parahaemolyticus in food based on agarose/Nano-Au membrane and screen-printed electrode

Recent outbreaks of foodborne illnesses continue to support the need for rapid and sensitive methods for detection of foodborne pathogens. A disposable electrochemical immunosensor for detection of Vibrio parahaemolyticus (VP) based on the screen-printed electrode (SPE) coated with agarose/Nano-Au membrane and horseradish peroxidase (HRP) labeled VP antibody (HRP-anti-VP) has been developed in this paper. Then, the immunosensor was characterized by cyclic voltammetry (CV) and laser scanning confocal microscope (LSCM). The immunosensor was incubated with the one-step immunoassay format involving VP for 30 min at room temperature (25 ± 0.5 °C). The access of the active center of HRP catalyzing the oxidation reaction of thionine by H₂O₂ was partly inhibited by VP, which connected on the surface of the immunosensor by immunoreaction. VP could be quantificationally detected according to the shift of reduction current while CV was used as electrochemical means to detect the products of the enzymatic reaction. Under the optimum conditions of immunoreaction and electrochemical detection, VP was rapidly detectable by sigmoidal curve method and form a linear calibration between 10⁵ and 10⁹ cfu/ml with an associated detection limit of 7.374 × 10⁴ cfu/ml (S/N = 3). The immunosensor had acceptable specificity, reproducibility, stability and accuracy, indicating that the immunosensor could satisfy the need of practical sample detection.     

Noncovalently functionalized water-soluble multiwall-nanotubes through azocarmine B and their application in nitric oxide sensor

A new noncovalent approach for the dissolution of MWNTs in water by azocarmine B (ACB) is reported. Through a simple electro-polymerization procedure, a novel electrochemical NO sensor based on water-soluble MWNTs and polyazocarmine B (PACB) nanofilm electrode was prepared, which showed excellent electrocatalytic activity towards the oxidation of nitric oxide (NO). The oxidation current linearly increased with the nitric oxide concentration in the range of 2.2 × 10⁻⁷–1.2 × 10⁻⁴ mol L⁻¹ with a low detection limit of 2.8 × 10⁻⁸ mol L⁻¹. The sensor has the merit of good stability, reproducibility, high sensitivity and selectivity, and it can be used to monitor NO released from rat liver cells effectively.     

Microfluidic immunosensor based on stable antibody-patterned surface in PMMA microchip

A sensitive enzyme-linked immunosorbent assay system has been constructed on microfluidic chips. The antibodies (anti-IgG) were encapsulated within the network of Al₂O₃ sol–gel in the microfluidic channels after the (BMA)_x-(MAOPTMS)_y copolymer modification. The alumina gel-derived microchannel surface can preserve the bioactivity of antibodies and resist nonspecific adsorption. After the immunoreaction of the antibodies, antigen, and alkaline phosphatase-labeled antibodies, a substrate solution containing 4-aminophenyl phosphate was introduced to the microchannels for end-column electrochemical detection. The microchip immunosensor showed a low detection limit (1 pg mL⁻¹), and broad linear response range (1–500 pg mL⁻¹). The results indicate that this method with high sensitivity and fast response has great potential for clinical and environmental analysis.     

A 3D-impedimetric immunosensor based on foam Ni for detection of sulfate-reducing bacteria

A 3D-immunosensor based on simple and efficient trapping platform (foam Ni) combining with adsorption of gold nanoparticles and specific recognition of biological/chemical molecular has been reported for detection of sulfate-reducing bacteria (SRB) using electrochemical impedance spectroscopy (EIS). The impedance spectra were also used to characterize the successful construct and stepwise modification of the impedimetric immunosensors. This results show that a linear relationship between electron-transfer resistance (R_ct) values and the logarithm of the SRB concentrations was obtained for the SRB concentration range of 2.1 × 10¹–2.1 × 10⁷ cfu/ml. Additionally, the fabricated immunosensor shows a high selectivity against other bacteria.     

Electrochemical immunosensors for interleukin-6. Comparison of carbon nanotube forest and gold nanoparticle platforms

Electrochemical immunosensors based on single wall nanotube (SWNT) forests and 5 nm glutathione-protected gold nanoparticles (GSH-AuNP) were developed and compared for the measurement of human cancer biomarker interleukin-6 (IL-6) in serum. Detection was based on sandwich immunoassays using multiple (14–16) horseradish peroxidase labels conjugated to a secondary antibody. Performance was optimized by effective blocking of non-specific binding (NSB) of the labels using bovine serum albumin. The GSH-AuNP immunosensor gave a detection limit (DL) of 10 pg mL^?1 IL-6 (500 amol mL^?1) in 10 μL calf serum, which was 3-fold better than 30 pg mL^?1 found for the SWNT forest immunosensor for the same assay protocol. The GSH-AuNPs platform also gave a much larger linear dynamic range (20–4000 pg mL^?1) than the SWNT system (40–150 pg mL^?1), but the SWNTs had 2-fold better sensitivity in the low pg mL^?1 range.     

Electrospun zirconia-embedded carbon nanofibre for high-sensitive determination of methyl parathion

Carbon nanofibers embedded with ultrafine zirconia nanoparticles (ZrO₂-CNFs) are fabricated via a new methodology. Polyvinylpyrrolidone (PVP) and polymethylmethacrylate (PMMA) binary polymers containing zirconium n-butoxide are first dissolved in dimethylformamide, and the resulting solution is electrospun and heat-treated. The tetragonal zirconia nanoparticles formed, with a size of 5 ± 2 nm in diameter, are uniformly distributed in the carbon nanofibres. Using Nafion as an additive, ZrO₂-CNFs are drop-cast onto the glassy carbon electrode (ZrO₂-CNF/GCE) and the modified electrode is then applied to detect methyl parathion (MP) using differential pulse voltammetry. Two linear relationships are found at the concentration ranges of 1 × 10^− 9–2 × 10^− 8 g/L and 2 × 10^− 8–2 × 10^− 7 g/L, with a detection limit of 3.4 × 10^− 10 g/L (S/N > 3). The electrospun-based ZrO₂-CNF is a very promising coating material for electrochemical sensing of organophosphorus compounds.     

Electron excitation coefficients of neutral and ionic levels of krypton in Townsend discharges

In this paper, we present experimental results for excitation coefficients of krypton atoms to several Kr and Kr⁺ excited levels for E/N (electric field to gas particle number density ratio usually in units of Townsend, 1 Td = 10^− 21 V m²) values from 7 × 10^− 20 V m² to above 1 × 10^− 17 V m². The data have been obtained in two different parallel plate self-sustained Townsend discharge drift tubes. The spatial distribution of the emission intensities were recorded and then normalized to give excitation coefficients at the anode, by using the electron flux at this point. The values of these coefficients are placed on an absolute scale by using a standard tungsten ribbon lamp calibrated against a primary blackbody radiation standard. The ionization rates at different E/N are obtained from the spatial emission profiles.The data for atomic krypton levels 2p₂, 2p₃, 2p₅, 2p₆, 2p₇, 2p₈, 3p₅ and 3p₆ (in Paschen notation) were converted to excitation coefficients by using quenching coefficients from the literature. The emission coefficients of eight 4s²4p⁴ (³P)5p levels of Kr⁺ have also been measured for E/N values from about 1 × 10^− 18 V m² up to nearly 8 × 10^− 18 V m².     

Flow-injection chemiluminescence determination of dihydralazine sulfate in serum using luminol and diperiodatocuprate (III) system

A novel flow-injection chemiluminescence (CL) method for the determination of dihydralazine sulfate (DHZS) is described. The method is based on the reaction of luminol and diperiodatocuprate (K₂[Cu(H₂IO₆)(OH)₂], DPC) in alkaline medium to emit CL, which is greatly enhanced by DHZS. The possible CL mechanism was first proposed based on the kinetic characteristic, CL spectrum and UV spectra. The optimum condition for the CL reaction was in detail studied using flow-injection system. The experiments indicated that under optimum condition, the CL intensity was linearly related to the concentration of DHZS in the range of 7.0 × 10^?9 to 8.6 × 10^?7 g mL^?1 with a detection limit (3σ) of 2.1 × 10^?9 g mL^?1. The proposed method had good reproducibility with the relative standard deviation 3.1% (n = 7) for 5.2 × 10^?8 g mL^?1 of DHZS. This method has the advantages of simple operation, fast response and high sensitivity. The special advantage of the system is that very low concentration of luminol can react with DPC catalyzed by DHZS to get excellent experiment results. And CL cannot be observed nearly when luminol with same concentration reacts with other oxidants, so luminol–DPC system has higher selectivity than other luminol CL systems. The method has been successfully applied to determine DHZS in serum.     

Electrochemical oxidation behavior of nitrite on a chitosan-carboxylated multiwall carbon nanotube modified electrode

A novel chitosan-carboxylated multiwall carbon nanotube modified glassy carbon electrode (MC/GCE) was developed to investigate the oxidation behavior of nitrite using cyclic voltammetry and differential pulse voltammetry modes. The electrochemical mechanism of the MC/GCE towards nitrite was discussed. The MC/GCE exhibited fast response towards nitrite with a detection limit of 1 × 10⁻⁷ mol l⁻¹ and a linear range of 5 × 10⁻⁷–1 × 10⁻⁴ mol l⁻¹. The possible interference from several common ions was tested. The proposed method was successfully applied in the detection of nitrite in real samples.     

Microstructural modifications in swift ion irradiated PET

Polyethylene terephthalte (PET) was irradiated with carbon (70 MeV) and copper (120 MeV) ions to analyze the induced modifications with respect to optical, structural and thermal properties. In the present investigation, the fluence for carbon irradiation was varied from 1×10¹¹ to 1×10¹⁴ ions cm⁻², while that for copper beam was kept in the range of 1×10¹¹ to 1×10¹³ ions cm⁻². UV–vis, FTIR, XRD and DSC techniques were utilized to study the induced changes. The analysis of UV–vis absorption studies reveals that there is decrease of optical energy gap up to 10% on carbon ion irradiation (at 1×10¹⁴ ions cm⁻²), whereas the copper beam (at 1×10¹³ ions cm⁻²) leads to a decrease of 49%. FTIR analysis indicated the formation of alkyne end groups along with the overall degradation of polymer with copper ion irradiation. X-ray diffraction analysis revealed that the semi-crystalline PET losses its crystallinity on swift ion irradiation. It was found that the carbon beam (1×10¹⁴ ions cm⁻²) decreased the crystallite size by 16% whereas this decrease is of 12% in case of the copper ion irradiated PET at 1×10¹³ ions cm⁻². The loss in crystallinity on irradiation has been supported by DSC thermograms.     

A new promising high temperature lithium battery solid electrolyte

Lithium lanthanoid silicates find importance as a solid electrolyte in high temperature lithium batteries in view of its high ionic conductivity at high temperatures. An first ever attempt is made to synthesis a new high temperature solid electrolyte viz., lithium samarium holmium silicate by sol–gel process and it has been characterized by thermal analysis (TGA–DTA), X-ray diffraction (XRD), infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Lithium ion conductivity of 0.8087 × 10⁻⁷ Ω⁻¹ cm⁻¹ at 25 °C was obtained and it increases with increasing temperature. For the first time a highest conductivity of 0.1095 × 10⁻² Ω⁻¹ cm⁻¹ was obtained at 850 °C which is high compared to other high temperature lithium battery solid electrolytes.