在发光二极管背光源上极具应用前景的Beta-sialon (Si6-zAlzOzN8-z):Eu2+窄带绿色荧光粉

基于氮化镓的白光发光二极管(LED)是目前一项崭新的背光源技术,广泛应用于宽色域、高光效的液晶显示屏。 在此项技术中,作为关键材料的荧光粉决定着背光单元的色域范围、发光效率和可靠性,因而要求它应具合适的发射波长和窄带发射。 β-sialon:Eu²⁺(sialon:silicon aluminum oxynitride(赛龙))就是一款非常适合背光应用的绿色荧光粉,这得益于其位于525~545 nm发射峰和只有55 nm狭窄的峰宽。 此文回顾和综述了β-sialon:Eu²⁺的合成方法、光谱特性、电子结构、晶体结构、可靠性和它的具体应用。 计算模拟和实验测试结果表明,Eu²⁺位于沿c轴方向的大孔道之中,并与6个最紧邻的(O,N)原子等距离配位。 因而,Eu²⁺的狭窄发射峰源自于Eu²⁺局域结构的高度对称性。 β-sialon:Eu²⁺的发射波长和带宽都能通过组成裁剪,即z值,进行调控;低z值组成能够实现更短波长发射和更窄带宽。 与传统的基于钇铝石榴石(YAG)荧光粉的背光源相比,β-sialon:Eu²⁺再搭配红色荧光粉制备的背光源具有更宽的色域,色域范围可提高15%以上。 其优异的发光性能和高可靠性使得β-sialon:Eu²⁺成为应用于先进显示屏的极其重要的绿色发光材料。     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Exploiting the complementary nature of LC/MALDI/MS/MS and LC/ESI/MS/MS for increased proteome coverage

The goal of this work was to evaluate the improvement in proteome coverage of complex protein mixtures gained by analyzing samples using both LC/ESI/MS/MS and LC/MALDI/MS/MS. Parallel analyses of a single sample were accomplished by interfacing a Probot fractionation system with a nanoscale LC system. The Probot was configured to perform a post-column split such that a fraction (20%) of the column effluent was sent for on-line LC/ESI/MS/MS data acquisition, and the majority of the sample (80%) was mixed with a matrix solution and deposited onto the MALDI target plate. The split-flow approach takes advantage of the concentration sensitive nature of ESI and provides sufficient quantity of sample for MALDI/MS/MS. Hybrid quadrupole time-of-flight mass spectrometers were used to acquire LC/ESI/MS/MS data and LC/MALDI/MS/MS data from a tryptic digest of a preparation of mammalian mitochondrial ribosomes. The mass spectrometers were configured to operate in a data dependent acquisition mode in which precursor ions observed in MS survey scans are automatically selected for interrogation by MS/MS. This type of acquisition scheme maximizes the number of peptide fragmentation spectra obtained and is commonly referred to as shotgun analysis. While a significant degree of overlap (63%) was observed between the proteins identified in the LC/ESI/MS/MS and LC/MALDI/MS/MS data sets, both unique peptides and unique proteins were observed by each method. These results demonstrate that improved proteome coverage can be obtained using a combination of these ionization techniques.     

Base hydrolysis of halobis/8-quinolinolato/ oxotechnetium/V/ complexes

Reaction mechanism of base hydrolysis of halobis/8-quinolinolato/oxotechnetium (V) /TcOX (ox)₂ X=Cl and Br/ was investigated by means of solvent extraction and spectrophotometric methods. Furthermore, distribution coefficients of tris/acetylacetonato/technetium/III/, dichlorobis/8-quinolinolato/technetium/IV/ and TcOX/ox/₂ between chloroform and aqueous solutions were determined. In an alkaline solution, TcOX/ox/₂ decomposed to pertechnetate as a final product. On the basis of the established base hydrolysis, the respective rate constants were determined.     

DEPENDENCE OF Pfr/Ptot-RATIOS ON LIGHT QUALITY and LIGHT QUANTITY

Abstract— Not only the spectral distribution of the light source determines the relative proportion of phytochrome in the P_fr(P_r) form, the P_fr/P_tot-ratio also depends strongly on the fluence rate of the irradiation. This dependence has been observed in the cotyledons of etiolated mustard seedlings for blue light of fluence rates below 20 Wm_-2. It has also been observed for white light and seems to be a characteristic of the phytochrome system resulting from the involvement of phytochrome thermal reactions as well as P_r P_fr photoconversions. The fluence rate dependence of P_fr/P_tot-ratios can be used to analyze the characteristic transformations of the phytochrome system. Phototransformations together with a fast thermal transformation (τ_½⋍ 3min) are consistent with the results obtained for blue and white light.     

THERMODYNAMIC FUNCTIONS FOR SINGLET MOLECULAR OXYGEN, O2(1△g) and O2 (1σ8+)

Abstract— A correction is offered to the approximate values previously given by Mendenhall (1978) for the enthalpy of formation and entropy of O₂(a₁Δ_g) and O₂(b₁₊) between 298 and 1500 K. Accurate values have been calculated for the functions together with the equilibrium constants for the formation of these species from O₂(X₃σ_g-).     

Separation of Th/IV/ and U/VI/ by extraction chromatography

Application of extraction chromatographic technique to the analytical separation of Th/IV/ and U/VI/ has been investigated. The stationary phase was a macroporous resin Amberlite XE-270 impregnated with undiluted trin-n-butylphosphate /TBP/ and the mobile phase was either 5.OM HNO₃ or 6M HCl. Separation of traces of Th/IV/ from large quantities of U/VI/ was achieved on a laboratory column by elution of the absorbed Th/IV/ with 6M HCl.     

CALCULATED RATES AND EQUILIBRIA OF THERMAL INTERCONVERSION OF TRIPLET (3g-) AND SINGLET (1Δg and g+) MOLECULAR OXYGEN

Abstract— From spectroscopic data and rate constants in the literature, equilibrium constants and rates of thermal formation of singlet oxygen (¹Δ_g and ¹Σ_g⁺) were calculated for a number of conditions. For the gas phase we estimate K _eq(¹Δ_g³Σ_g^-) = 1.67 exp(-94.31 KJ/RT) and K _eq(¹Σ_g⁺/³Σ_g^-) = 0.33 exp(-157.0 KJ/RT). The calculated rate constants for the ³Σ_g⁺→¹Δ_g transition of O₂ at 25°C varied from 2.5 × 10^-11 s^-1 in water to 4.8 × 10^-16 s^-1 in air, assuming equal solvent interactions with the ground and excited states. Physical quenchers for singlet oxygen are expected to be catalysts for its thermal formation. Equations are presented which allow one to estimate whether such catalysis by quenchers will result in a pro-oxidant effect.     

Studies on licand displacement of thiourea in technetium/III/-coordination compounds by chlorine and 1,2 bis/diphenylphosphino/-ethane /dppe/

Ligand displacement reaction between Tc/III/-thiourea complexes and the model ligand 1,2 bis/diphenylphosphino/ ethane /dppe/ were investigated. The results appear unfavourable to the purpose of synthesizing Tc/III/ dppe complexes.     

Separation of Tl/III/ from Tl/I/

A method for the separation of Tl/III/from Tl/I/ is reported employing 1-/2-pyridylazo/-2-naphthol /PAN/ and Rhodamine-B as extracting agents.     

Storage-Reduction of NOx over Combined Catalysts of Pt/Ba/Al2O3-Mn/Ba/Al2O3： Carbon Monoxide as Reductant

Storage-reduction of NOx by carbon monoxide was investigated over combined catalysts of Mn/Ba/Al2O3-Pt/Ba/Al2O3. Combination of Mn/Ba/Al2O3 and Pt/Ba/Al2O3 catalysts in different ways showed excellent NOx storage-reduction performance and the content of Pt could be reduced by 50%. Not only the addition of 5Mn/15Ba/Al2O3 to lPt/15Ba/Al2O3 could improve its storage ability, but also enhance the NOx conversion consequently. NOx conversion over the combined catalysts (the combined catalysts I and II) was increased under dynamic lean-rich burn conditions, the maximum NOx conversion increased from 69.4% to respectively 78.8% and 75.7% over two combined catalysts.     

Influence of pretreatment conditions on low-temperature CO oxidation over Au/MOx/Al2O3 catalysts

Composite oxide MO_x/Al₂O₃ supported gold catalysts for low-temperature CO oxidation were prepared and investigated. The presence of transition metal oxide was proved to be beneficial to the improvement of catalytic performance of Au/Al₂O₃ catalysts for low-temperature CO oxidation. Furthermore, the influence of various pretreatment conditions on Au/MO_x/Al₂O₃ catalysts was studied carefully. The image of TEM showed that gold catalyst with small gold particles only in the form of a fine dispersion exhibited highly catalytic activity. The XPS, Fourier transform infrared (FTIR) spectroscopy characterization results of Au/FeO_x/Al₂O₃ catalyst showed that gold catalysts having partially oxidized gold species have the best catalytic performance. One possible pathway for CO oxidation on Au/FeO_x/Al₂O₃ catalyst is that the CO adsorbed on gold particles reacts with adsorbed oxygen, which is possible to occur on oxygen vacancies on the support or at the metal–support interface.     

Y2O3包覆LiCo1/3Ni1/3Mn1/3O2的电化学性能

通过在硝酸钇水溶液浸渍并焙烧的简单工艺, 在LiCo1/3Ni1/3Mn1/3O2材料表面包覆了一层Y2O3. 采用X射线衍射(XRD), 扫描电子显微镜(SEM), 透射电子显微镜(TEM), 循环伏安(CV)和恒流充放电对包覆和未包覆的LiCo1/3Ni1/3Mn1/3O2进行了测试分析. 结果表明, Y2O3包覆并没有改变LiCo1/3Ni1/3Mn1/3O2的晶体结构, 只存在于LiCo1/3Ni1/3Mn1/3O2的表面; 与未包覆的材料相比, Y2O3包覆后的材料在高电位下具有更好的容量保持率和放电容量. CV测试表明, 包覆层的存在有效抑制了材料层状结构的转变及电极与电解液的负反应.     

Au/PATP/PANI膜电极和Au/PATP/PANI/TiO2膜电极的光电化学

聚苯胺（PANI）是一种结构、 性质不同于聚乙炔和聚吡咯的新型导电高聚物,有着十分广泛的应用[1,2].近年来利用光电化学研究聚苯胺的电子结构、 掺杂情况引起人们的重视[3～5].在酸性溶液中电聚合制备聚苯胺的循环伏安曲线上出现两对氧化还原峰,其峰值电位分别为E11/2=0.13 V和E21/2=0.7 V(对饱和甘汞电极).通过改变电极电位,可获得部分氧化态、还原态、氧化态等3种状态的聚苯胺.部分氧化态具有金属导电性,还原态和氧化态均为绝缘体.本文测量3种状态聚苯胺膜电极的光电响应,首次得到其光电流谱,发现聚苯胺一些新的光电化学实验结果.提出了覆盖绝缘体的金属内发射的光电化学模型.同时,在聚苯胺膜上电沉积纳米TiO2微粒膜,得到广谱区的复合光电材料.     

RATE CONSTANTS FOR INTERACTION OF 1O21Δg) WITH AZIDE ION IN WATER

Abstract— The rate constant for quenching of ¹O₂ by azide ion in water was determined to be (5.0 ± 0.4) × 10⁸ M ⁻¹ s⁻¹ using a variety of sensitizers (including humic acids) and ¹O₂ acceptors. The apparent second-order rate constant decreases with pH below pH 5.5 in accordance with the protonation of azide ion to form hydrazoic acid (p K _a= 4.6). Quenching by hydrazoic acid is at least 2 orders of magnitude slower than by azide ion. Greater than 99% of all interactions between ¹O₂ and azide ion involve physical quenching rather than chemical reaction. Humic acid triplets are not significantly quenched by azide ion at concentrations less than 2 m M , allowing azide ion quenching to be used as a diagnostic test for the intermediacy of ¹O₂ in photosensitized oxidations in natural surface waters.     

Matrix elements of Sz-adapted and theLz-adapted reduced Hamiltonians

This paper adds some considerations of orbital angular momentum to the framework of the spin-adapted reduced Hamiltonian (SRH) theory. The tool to carry out this purpose is the determination of traces of q-order replacement operators (q-RO) calculated in a finite-dimensional, antisymmetric. S_z- and L_z-adapted N-electron space. A simple procedure to calculate this kind of trace is presented.     

Recoil implantation reaction in geometrical isomers of tris/benzoylacetonato/chromium/III/

Hot atom chemical reaction by⁵⁰Cr/n, /⁵¹Cr and⁵²Cr/, n/⁵¹Cr reactions, and recoil implantation reaction by⁵¹V/p, n/⁵¹Cr reaction were investigated using geometrical isomers /mer and fac/ of tris/benzoylacetonato/ chromium/III/ /Cr/ba/₃/. The production of counter isomer was observed for both mer- and fac-targets, although the yield of labelled parent isomer was larger. The observed mer/fac yield ratio suggests that the main formation mechanism of⁵¹Cr/ba/₃ is the reaction of ba^– and Cr/ba/ ₂ ⁺ which has the same geometrical configuration of target complex, and the substitution reaction of central metal atom by recoil⁵¹Cr. Furthermore, implantation gave rise to a much higher yield of labelled Cr/ba/₃ compared to the case of in situ nuclear recoils.     

锌掺杂提高LiNi1/3Co1/3Mn1/3O2正极材料的电化学稳定性

通过共沉淀法与固相法相结合制备了掺锌的高稳定性Li(Ni_1/3Co_1/3Mn_1/3)_1-xZn_xO₂ (x=0, 0.02, 0.05)正极材料. 循环伏安(CV)曲线表明Zn掺杂使氧化峰与还原峰的电势差减小到0.09 V, 电化学阻抗谱(EIS)曲线表明Zn掺杂使电极的阻抗从266 Ω减小到102 Ω. Li⁺嵌入扩散系数从1.20×10^-11 cm²·s^-1增大到 2.54×10^-11 cm²·s^-1. Li(Ni_1/3Co_1/3Mn_1/3)_0.98Zn_0.02O₂正极材料以0.3C充放电在较高的截止电压(4.6 V)下比其他两种材料的电化学循环性能更稳定, 其第二周的放电比容量为176.2 mAh·g^-1, 循环100周后容量几乎没衰减; 高温(55 °C)下充放电循环100周, 其放电比容量平均每周仅衰减0.20%, 远小于其他两种正极材料(LiNi_1/3Co_1/3Mn_1/3O₂平均每周衰减0.54%; Li(Ni_1/3Co_1/3Mn_1/3)_0.95Zn_0.05O₂平均每周衰减0.38%). Li(Ni_1/3Co_1/3Mn_1/3)_0.98Zn_0.02O₂正极材料以3C充放电时其放电比容量可达142 mAh·g^-1, 高于其他两种正极材料. 电化学稳定性的提高归因于Zn掺杂后减小了电极的极化和阻抗, 增大了锂离子扩散系数.     

荧光粉Ba5-3x/2B4O11∶xEu3+的制备及发光性能

采用高温固相烧结法成功制备了Ba_5-3x/2B₄O₁₁∶xEu³⁺(x=0.02~0.22)荧光粉,利用XRD和SEM等对荧光粉进行了结构和形貌表征。 在激发波长为393 nm的条件下,发射峰(596、621、657和706 nm)与Eu³⁺的⁵D₀-⁷F_J(J=1,2,3,4)电子跃迁相对应,其中621 nm最强发射峰由Eu³⁺离子⁵D₀→⁷F₂电偶极跃迁造成。 文章还研究了Eu³⁺掺杂浓度对Ba_5-3x/2B₄O₁₁∶xEu³⁺发光性能的影响,结果表明,荧光粉的发光强度随着Eu³⁺掺杂量的增加呈现先增大后减小的趋势,Eu³⁺最佳掺杂量为0.16。