A mild, phosphine-free method for the conversion of alcohols into halides (Cl, Br, I) via the corresponding O-alkyl isoureas

A novel procedure for the conversion of primary and secondary alcohols into the corresponding alkyl chlorides, bromides and iodides is described. The transformation is high-yielding in the case of chlorides and bromides, tolerates a range of functional groups, and does not rely on the use of phosphines.     

Synthesis of alkenyl sulfides through the iron-catalyzed cross-coupling reaction of vinyl halides with thiols

We report here the iron-catalyzed cross-coupling reaction of alkyl vinyl halides with thiols. While many works are devoted to the coupling of thiols with alkyl vinyl iodides, interestingly, the known S-vinylation of vinyl bromides and chlorides is limited to 1-(2-bromovinyl)benzene and 1-(2-chlorovinyl)benzene. Investigation on the coupling reaction of challenging alkyl vinyl bromides and chlorides with thiols is rare. Since the coupling of 1-(2-bromovinyl)benzene and 1-(2-chlorovinyl)benzene with thiols can be performed in the absence of any catalyst, here we focus on the coupling of thiols with alkyl vinyl halides. This system is generally reactive for alkyl vinyl iodides and bromides to provide the products in good yields. 1-(Chloromethylidene)-4-tert-butyl-cyclohexane was also coupled with thiols, giving the targets in moderate yields.     

Selective Radical Fluorination of Tertiary Alkyl Halides at Room Temperature

Direct fluorination of tertiary alkyl bromides and iodides with Selectfluor is described. The halogen‐exchange fluorination proceeds efficiently in acetonitrile at room temperature under metal‐free conditions and exhibits a wide range of functional group compatibility. Furthermore, the reactions are highly selective in that alkyl chlorides and primary and secondary alkyl bromides remain intact. A radical mechanism is proposed for this selective fluorination.     

High yielding alkylations of unactivated sp3 and sp2 centres with alkyl-9-BBN reagents using an NHC-based catalyst: Pd-PEPPSI-IPrf

High yielding, room temperature cross couplings of unactivated alkyl bromides and aryl bromides/chlorides with alkyl-9-BBN reagents has been achieved using an NHC-based catalyst (Pd-PEPPSI-IPr) via a general, functional-group tolerant and easily implemented protocol.     

Nickel-catalyzed reductive coupling of aryl halides with secondary alkyl bromides and allylic acetate

A room-temperature Ni-catalyzed reductive method for the coupling of aryl bromides with secondary alkyl bromides has been developed, providing C(sp(2))-C(sp(3)) products in good to excellent yields. Slight modification of this protocol allows efficient coupling of activated aryl chlorides with cyclohexyl bromide and aryl bromides with allylic acetate.     

Cleavage of immobilized disubstituted triazenes with electrophiles: solid-phase synthesis of alkyl halides and esters

An efficient, selective cleavage of polymer-bound disubstituted triazenes with trimethylsilyl halides produces alkyl chlorides, bromides and iodides in good to excellent purities and yields. Similarly, alkyl esters are formed upon cleavage with carboxylic acids.     

Direct Formation of Secondary and Tertiary Alkylzinc Bromides and Subsequent Cu(I)-Mediated Couplings

Secondary and tertiary alkylzinc bromides can be generated from the direct oxidative addition of Rieke zinc to secondary and tertiary alkyl bromides in high yield. These organozinc reagents have been found to undergo copper-catalyzed conjugate addition, cross-coupling with acid chlorides, and carbocupration to activated alkynes.     

Reactions of sodium 3,4,5-triphenyl-1,2-diphosphacyclopentadienide with alkyl halides and silicon and tin chlorides

Reactions of sodium 3,4,5-triphenyl-1,2-diphosphacyclopentadienide with primary alkyl bromides, secondary alkyl iodides, and silicon and tin chlorides gave stable 1-substituted 1,2-diphospholes. In a solution of 3,4,5-triphenyl-1-trimethylstannyl-1,2-diphosphacyclopenta-2,4-diene, the Me3Sn group migrates between two phosphorus atoms.     

Nickel-catalyzed Kumada cross-coupling reactions of tertiary alkylmagnesium halides and aryl bromides/triflates

We report a Ni-catalyzed process for the cross-coupling of tertiary alkyl nucleophiles and aryl bromides. This process is extremely general for a wide range of electrophiles and generally occurs with a ratio of retention to isomerization >30:1. The same procedure also accommodates the use of aryl triflates, vinyl chlorides, and vinyl bromides as the electrophilic component.     

Reductions of Alkyl and Aryl Halides with Magnesium and Methanol

The combination of magnesium in methanol provides a convenient, efficient system for the selective hydrogenolysis of alkyl and aryl iodides and bromides. Vinyl bromides are also reduced if conjugated to an aromatic ring while only benzylic, allylic and naphthalenic chlorides are affected. Deuterium may be selectively introduced via utilization of methanol-d as solvent.     

Ruthenium(III) chloride catalyzed efficient synthesis of unsymmetrical diorganyl selenides via cleavage of dibenzyl and diphenyl diselenides in the presence of zinc

[equation: see text] An efficient one-pot route to unsymmetrical diorganyl selenides has been developed by ruthenium(III) chloride catalyzed reactions of dibenzyl or diphenyl diselenides with alkyl halides in the presence of zinc. Organic iodides, bromides, and activated chlorides underwent the reactions efficiently. Unreactive organic chlorides also underwent the same type of selenation with sodium bromide as the additive.     

Zn/CuI-mediated coupling of alkyl halides with vinyl sulfones, vinyl sulfonates, and vinyl sulfonamides

A novel high-yielding Zn/CuI-mediated coupling method of alkyl halides with vinyl sulfones, vinyl sulfonates, and vinyl sulfonamides is described. This protocol is applicable for primary, secondary, and tertiary alkyl iodides and bromides. Alkyl chlorides and aryl and vinyl halides were unreactive under the reaction conditions. Formamide was found to be a superior solvent for obtaining high yields.     

Suzuki Coupling of Cyclopropylboronic Acid With Aryl Halides Catalyzed by a Palladium–Tetraphosphine Complex

The tetraphosphine all‐cis‐1,2,3,4‐tetrakis(diphenylphosphinomethyl)cyclopentane (Tedicyp) in combination with [Pd(C₃H₅)Cl]₂ affords a very efficient catalyst for the coupling of cyclopropylboronic acid with aryl bromides and aryl chlorides. Higher reactions rates were observed with aryl bromides than with aryl chlorides; however, even in the presence of 1–0.4% of catalyst, a few aryl chlorides gave the coupling products in good yields. A wide variety of substituents such as alkyl, methoxy, trifluoromethyl, acetyl, benzoyl, formyl, carboxylate, nitro, and nitrile on the aryl halides are tolerated. The coupling reaction of sterically very congested aryl bromides such as bromomesitylene or 2,4,6‐triisopropylbromobenzene also proceeds in good yields.     

Efficient synthesis of 1‐alkyl(aralkyl)‐3‐methyl(ethyl)imidazolium halides: Precursors for room‐temperature ionic liquids

Facile preparation of 1‐alkyl(aralkyl)‐3‐methyl(ethyl)imidazolium bromides and chlorides is reported. With short reaction times, the desired salts are obtained without purification in high yields from equimolar amounts of reactants.     

Nickel‐Catalyzed C?H Alkylations: Direct Secondary Alkylations and Trifluoroethylations of Arenes

A versatile nickel catalyst allowed for C H alkylations of unactivated arenes with challenging secondary alkyl bromides and chlorides. The high catalytic efficacy also set the stage for direct secondary alkylations of indoles as well as C H trifluoroethylations with ample substrate scope.     

Reduction of organic halides with lanthanum metal: a novel generation method of alkyl radicals

Results of the reaction of alkyl halides with lanthanum metal have been shown. The reduction of alkyl iodide with 1/3 equiv of lanthanum metal efficiently proceeded to give the corresponding reductive dimerized products along with the formation of reduction and dehydroiodination products. In the case of alkyl bromides and chlorides, the reaction did not proceed under the same reaction conditions as that of alkyl iodides; however, the reaction was dramatically promoted by the addition of a catalytic amount of iodine. A reaction pathway including alkyl radicals was suggested.     

Nickel-catalyzed,ring-forming aromatic C–H alkylations with unactivated alkyl halides

The development of a nickel-catalyzed C–H alkylation of aromatic substrates with unactivated alkyl halides is described. This carbocyclization facilitates the synthesis of diverse fused ring systems from simple aromatic substrates and is an attractive alternative to traditional polar or radical-mediated ring formations. The present system uses unactivated primary and secondary alkyl bromides and chlorides, while avoiding the use of precious palladium catalysts and more reactive alkyl halides commonly used in related C–H alkylations.     

A Facile Method for the Conversion of Primary Alkyl Chlorides to the Corresponding Bromides

Treatment of several representative primary alkyl chlorides with one equivalent of sodium bromide in 2:1 (v/v) N,N-dimethylformamide : dibromomethane at 100[ddot]C for several hours resulted in their quantitative conversion to the corresponding bromides.     

Selective formal transesterification of fluorinated 2-(trimethylsilyl)ethyl alpha-imino esters mediated by TBAF

The scope of the transesterification reaction between beta-fluorinated alpha-imino esters and various electrophiles in the presence of TBAF as fluorine source is described. The reaction is highly selective for alkyl iodides, bromides, and mesylates, while alkyl chlorides react at a significantly slower rate and tosylates do not react under the reaction conditions. This methodology represents a simple and useful alternative for the preparation of a wide variety of fluorinated alpha-imino esters.     

Palladium-catalyzed arylation of malonates and cyanoesters using sterically hindered trialkyl- and ferrocenyldialkylphosphine ligands.

Palladium-catalyzed reactions of aryl bromides and chlorides with two common stabilized carbanions-enolates of dialkyl malonates and alkyl cyanoesters-are reported. An exploration of the scope of these reactions was conducted, and the processes were shown to occur in a general fashion. Using P(t-Bu)(3) (1), the pentaphenylferrocenyl ligand (Ph(5)C(5))Fe(C(5)H(4))P(t-Bu)(2) (2), or the adamantyl ligand (1-Ad)P(t-Bu)(2) (3), reactions of electron-poor and electron-rich, sterically hindered and unhindered aryl bromides and chlorides were shown to react with diethyl malonate, di-tert-butyl malonate, diethyl fluoromalonate, ethyl cyanoacetate, and ethyl phenylcyanoacetate. Although alkyl malonates and ethyl alkylcyanoacetates did not react with aryl halides using these catalysts, the same products were formed conveniently in one pot from diethylmalonate by cross-coupling of an aryl halide in the presence of excess base and subsequent alkylation.