The Core/Shell Structure P Doped MoS2@Ni3S2 Nanorods Array for High Current Density Hydrogen Evolution in Alkaline and Acidic Electrolyte

Electrocatalysis is the most promising strategy to generate clean energy H₂, and the development of catalysts with excellent hydrogen evolution reaction (HER) performance at high current density that can resist strong alkaline and acidic electrolyte environment is of great significance for practical industrial application. Therefore, a P doped MoS₂@Ni₃S₂ nanorods array (named P-NiMoS) was successfully synthesized through successive sulfuration and phosphorization. P-NiMoS presents a core/shell structure with a heterojunction between MoS₂ (shell) and Ni₃S₂ (core). Furthermore, the doping of P modulates the electronic structure of the P-NiMoS; the electrons transfer from the t_2g orbital of Ni element to the e_g empty orbital of Mo element through the Ni−S−Mo bond at the Ni₃S₂ and MoS₂ heterojunction, facilitating the hydrogen evolution reaction. As a result, P-NiMoS exhibits excellent HER activity; the overpotential is 290 mV at high current density of 250 mA cm⁻² in alkaline electrolyte, which is close to Pt/C (282 mV@250 mA cm⁻²), and P-NiMoS can stably evolve hydrogen for 48 h.     

Electrochemically exfoliated Ni-doped MoS2 nanosheets for highly efficient hydrogen evolution and Zn-H2O battery

Thanks to tunable physical and chemical properties, two-dimensional (2D) materials have received intensive interest, endowing their excellent electrocatalytic performances for applications in energy conversion. However, their catalytic activities are largely determined by poor adsorption energy and limited active edge sites. Herein, a one-step electrochemical exfoliation strategy was developed to fabricate 2D Ni-doped MoS₂ nanosheets (Ni-EX-MoS₂) with a lateral size of ～500 nm and thickness of ～3.5 nm. Profiting from high electrical conductivity and abundant exposing active sites, Ni-EX-MoS₂ catalyst displayed an admirable performance for electrochemical hydrogen evolution reaction (HER) with a low overpotential of 145 mV at 10 mA/cm² as well as a small Tafel slope of 89 mV/dec in alkaline media, which are superior to those of the most reported MoS₂-based electrocatalysts. The formed Ni species with tuning electronic structure played a crucial role as primary active center of Ni-EX-MoS₂, as well as the forming stable 1T/2H phase MoS₂ interface demonstrated a synergistic effect on electrocatalytic HER performance. Further, Ni-EX-MoS₂ was employed as a cathode electrode for alkaline Zn-H₂O battery, which displayed a high power density of 3.3 mW/cm² with excellent stability. This work will provide a simple and effective guideline for design of electrochemically exfoliated transition metal-doped MoS₂ nanosheets to inspire their practical applications in energy catalytic and storage.     

TiO2 nanorods based self-supported electrode of 1T/2H MoS2 nanosheets decorated by Ag nano-particles for efficient hydrogen evolution reaction

Molybdenum disulfide (MoS₂) has shown significant promise as an economic hydrogen evolution reaction (HER) catalyst for hydrogen generation, but its catalytic performance is still lower than noble metal-based catalysists. Herein, a silver nanoparticles (Ag NPs)-decorated 1T/2H phase layered MoS₂ electrocatalyst grown on titanium dioxide nanorod arrays (Ag NPs/1T(2H) MoS₂/TNRs) was prepared through acid-tunable ammonium ion intercalation. Taking advantage of MoS₂ layered structure and crystal phase controllability, as-prepared Ag NPs/1T(2H) MoS₂/TNRs exhibited ultrahigh HER activity. As-proposed strategy combines facile hydrogen desorption (Ag NPs) with efficient hydrogen adsorption (1T/2H MoS₂) effectively circumventes the kinetic limitation of hydrogen desorption by 1T/2H MoS₂. The as-prepared Ag NPs/1T(2H) MoS₂/TNRs electrocatalyst exhibited excellent HER activity in 0.5 mol/L H₂SO₄ with low overpotential (118 mV vs. reversible hydrogen electrode (RHE)) and small Tafel slope (38.61 mV/dec). The overpotential exhibts no obvious attenuation after 10 h of constant current flow. First-principles calculation demonstrates that as-prepared 1T/2H MoS₂ exhibit a large capacity to store protons. These protons can be subsequently transferred to Ag NPs, which significantly increases the hydrogen coverage on the surface of Ag NPs in HER process and thus change the rate-determining step of HER on Ag NPs from water dissociation to hydrogen recombination. This study provides a unique strategy to improve the catalytic activity and stability for MoS₂-based electrocatalyst.     

Self‐Optimization of the Active Site of Molybdenum Disulfide by an Irreversible Phase Transition during Photocatalytic Hydrogen Evolution

The metallic 1T‐MoS₂ has attracted considerable attention as an effective catalyst for hydrogen evolution reactions (HERs). However, the fundamental mechanism about the catalytic activity of 1T‐MoS₂ and the associated phase evolution remain elusive and controversial. Herein, we prepared the most stable 1T‐MoS₂ by hydrothermal exfoliation of MoS₂ nanosheets vertically rooted into rigid one‐dimensional TiO₂ nanofibers. The 1T‐MoS₂ can keep highly stable over one year, presenting an ideal model system for investigating the HER catalytic activities as a function of the phase evolution. Both experimental studies and theoretical calculations suggest that 1T phase can be irreversibly transformed into a more active 1T′ phase as true active sites in photocatalytic HERs, resulting in a “catalytic site self‐optimization”. Hydrogen atom adsorption is the major driving force for this phase transition.     

Amorphous Co-P Film: an Efficient Electrocatalyst for Hydrogen Evolution Reaction in Alkaline Seawater

Seawater electrolysis is considered an attractive alternative to conventional freshwater electrolysis for hydrogen production due to the abundance of seawater in nature. For this reason, efficient electrocatalysts for hydrogen evolution reaction (HER) in alkaline seawater are highly desired. In this study, we report an amorphous Co−P alloy on nickel foam (Co−P/NF) that behaves as an efficient and stable HER electrocatalyst for alkaline seawater electrolysis. The Co−P/NF presents high catalytic performance for HER, requiring a low overpotential of 213 mV to drive a current density of 100 mA cm⁻² and a Tafel slope of 120.2 mV dec⁻¹ in alkaline seawater. Furthermore, it shows remarkable electrochemical and structural stability in alkaline seawater.     

Monolayer 1T and 1T′ MoSO as Promising Electrocatalyst for Hydrogen Evolution based on First Principle Calculations

Molybdenum disulfide (MoS₂) has been regarded as one of the most promising candidates for replacing Pt group noble metals as an efficient electrocatalyst to enhance the hydrogen evolution reaction (HER) in consideration of its relatively high earth abundance. Recent studies show that the catalytic efficiency of MoS₂ for HER can be promoted by the presence of 1T-phase MoS₂. It is hard to precisely control the formation of 1T-MoS₂, however, due to its metastability relative to 2H-MoS₂. Elevating the stability of 1T phase allotrope is therefore of great importance and could be realized by replacing divalent S with monovalent elements or groups according to crystal field theory, which has been demonstrated through our first-principles density functional theory (DFT) calculation results. Differential Gibbs free energy analysis for hydrogen adsorption (ΔG_H*) suggest that 1T and 1T′ MoSO (O doped MoS₂) might be taken as potential candidate catalysts for HER process with better performance than 1T and 1T′ MoS₂. We also propose a probable approach to synthesize 1T and 1T′ MoSO under oxidation circumstance environment of graphene oxide.     

Tuning the Intrinsic Activity and Electrochemical Surface Area of MoS2 via Tiny Zn Doping: Toward an Efficient Hydrogen Evolution Reaction (HER) Catalyst

Molybdenum sulfide (MoS₂) is considered as an alternative material for commercial platinum catalysts for electrocatalytic hydrogen evolution reaction (HER). Improving the apparent HER activity of MoS₂ to a level comparable to that of Pt is an essential premise for the commercial use of MoS₂. In this work, a Zn-doping strategy is proposed to enhance the HER performance of MoS₂. It is shown that tiny Zn doping into MoS₂ leads to the enhancement of the electrochemical surface area, increases in proportion of HER active 1T phase in the material and formation of catalytic sites of higher intrinsic activity. These benefits result in a high-performance HER electrocatalyst with a low overpotential of 190 mV(@10 mA cm⁻²) and a low Tafel slope of 58 mV dec⁻¹. The origin for the excellent electrochemical performance of the doped MoS₂ is rationalized with both experimental and theoretical investigations.     

Efficient Removal of Antibiotic Resistance Genes through 4f-2p-3d Gradient Orbital Coupling Mediated Fenton-Like Redox Processes

Peroxymonosulfate (PMS) mediated radical and nonradical active substances can synergistically achieve the efficient elimination of antibiotic resistance genes (ARGs). However, enhancing interface electron cycling and optimizing the coupling of the oxygen-containing intermediates to improve PMS activation kinetics remains a major challenge. Here, Co doped CeVO₄ catalyst (Co−CVO) with asymmetric sites was constructed based on Ce 4f−O 2p−Co 3d gradient orbital coupling. The catalyst achieved approximately 2.51×10⁵ copies/mL of extracellular ARGs (eARGs) removal within 15 minutes, exhibited ultrahigh degradation rate (k=1.24 min⁻¹). The effective gradient 4f-2p-3d orbital coupling precisely regulates the electron distribution of Ce−O−Co active center microenvironment, while optimizing the electronic structure of Co 3d states (especially the occupancy of e_g), promoting the adsorption of oxygen-containing intermediates. The generated radical and nonradical generated by interfacial electron cycling enhanced by the reduction reaction of PMS at the Ce site and the oxidation reaction at the Co site achieved a significant mineralization rate of ARGs (83.4 %). The efficient removal of ARGs by a continuous flow reactor for 10 hours significantly reduces the ecological risk of ARGs in actual wastewater treatment.     

Evolution of Stabilized 1T-MoS2 by Atomic-Interface Engineering of 2H-MoS2/Fe−Nx towards Enhanced Sodium Ion Storage

Metallic conductive 1T phase molybdenum sulfide (MoS₂) has been identified as promising anode for sodium ion (Na⁺) batteries, but its metastable feature makes it difficult to obtain and its restacking during the charge/discharge processing result in part capacity reversibility. Herein, a synergetic effect of atomic-interface engineering is employed for constructing 2H-MoS₂ layers assembled on single atomically dispersed Fe−N−C (SA Fe−N−C) anode material that boosts its reversible capacity. The work-function-driven-electron transfer occurs from SA Fe−N−C to 2H-MoS₂ via the Fe−S bonds, which enhances the adsorption of Na⁺ by 2H-MoS₂, and lays the foundation for the sodiation process. A phase transfer from 2H to 1T/2H MoS₂ with the ferromagnetic spin-polarization of SA Fe−N−C occurs during the sodiation/desodiation process, which significantly enhances the Na⁺ storage kinetics, and thus the 1T/2H MoS₂/SA Fe−N−C display a high electronic conductivity and a fast Na⁺ diffusion rate.     

Hierarchical Hollow-Nanocube Ni−Co Skeleton@MoO3/MoS2 Hybrids for Improved-Performance Lithium-Ion Batteries

Improving the performance of anode materials for lithium-ion batteries (LIBs) is a hotly debated topic. Herein, hollow Ni−Co skeleton@MoS₂/MoO₃ nanocubes (NCM-NCs), with an average size of about 193 nm, have been synthesized through a facile hydrothermal reaction. Specifically, MoO₃/MoS₂ composites are grown on Ni−Co skeletons derived from nickel–cobalt Prussian blue analogue nanocubes (Ni−Co PBAs). The Ni−Co PBAs were synthesized through a precipitation method and utilized as self-templates that provided a larger specific surface area for the adhesion of MoO₃/MoS₂ composites. According to Raman spectroscopy results, as-obtained defect-rich MoS₂ is confirmed to be a metallic 1T-phase MoS₂. Furthermore, the average particle size of Ni−Co PBAs (≈43 nm) is only about one-tenth of the previously reported particle size (≈400 nm). If assessed as anodes of LIBs, the hollow NCM-NC hybrids deliver an excellent rate performance and superior cycling performance (with an initial discharge capacity of 1526.3 mAh g⁻¹ and up to 1720.6 mAh g⁻¹ after 317 cycles under a current density of 0.2 A g⁻¹). Meanwhile, ultralong cycling life is retained, even at high current densities (776.6 mAh g⁻¹ at 2 A g⁻¹ after 700 cycles and 584.8 mAh g⁻¹ at 5 A g⁻¹ after 800 cycles). Moreover, at a rate of 1 A g⁻¹, the average specific capacity is maintained at 661 mAh g⁻¹. Thus, the hierarchical hollow NCM-NC hybrids with excellent electrochemical performance are a promising anode material for LIBs.     

Bottom-Up Synthesized MoS2 Interfacing Polymer Carbon Nanodots with Electrocatalytic Activity for Hydrogen Evolution

The preparation of an MoS₂–polymer carbon nanodot (MoS₂-PCND) hybrid material was accomplished by employing an easy and fast bottom-up synthetic approach. Specifically, MoS₂-PCND was realized by the thermal decomposition of ammonium tetrathiomolybdate and the in situ complexation of Mo with carboxylic acid units present on the surface of PCNDs. The newly prepared hybrid material was comprehensively characterized by spectroscopy, thermal means, and electron microscopy. The electrocatalytic activity of MoS₂-PCND was examined in the hydrogen evolution reaction (HER) and compared with that of the corresponding hybrid material prepared by a top-down approach, namely MoS₂-PCND(exf-fun), in which MoS₂ was firstly exfoliated and then covalently functionalized with PCNDs. The MoS₂-PCND hybrid material showed superior electrocatalytic activity toward the HER with low Tafel slope, excellent electrocatalytic stability, and an onset potential of −0.16 V versus RHE. The superior catalytic performance of MoS₂-PCND was rationalized by considering the catalytically active sites of MoS₂, the effective charge/energy-transfer phenomena from PCNDs to MoS₂, and the synergetic effect between MoS₂ and PCNDs in the hybrid material.     

Time-Resolved Spectroscopy and High-Efficiency Light-Driven Hydrogen Evolution of a {Mo3S4}-Containing Polyoxometalate-Based System

Polyoxothiometalate ions (ThioPOM) are active hydrogen-evolution reaction (HER) catalysts based on modular assembly built from electrophilic clusters {MoS_x} and vacant polyoxotungstates. Herein, the dumbbell-like anion [{(PW₁₁O₃₉)Mo₃S₄(H₂O)₃(OH)}₂]⁸⁻ exhibits very high light-driven HER activity, while the active cores {Mo₃S₄} do not contain any exposed disulfido ligands, which were suspected to be the origin of the HER activity. Moreover, in the catalyst architecture, the two central {Mo₃S₄} cores are sandwiched by two {PW₁₁O₃₉}⁷⁻ subunits that act as oxidant-resistant protecting groups and behave as electron-collecting units. A detailed photophysical study was carried out confirming the reductive quenching mechanism of the photosensitizer [Ir(ppy)₂(dtbbpy)]⁺ by the sacrificial donor triethanolamine (TEOA) and highlighting the very high rate constant of the electron transfer from the reduced photosensitizer to the ThioPOM catalyst. Such results provide new insights into the field of molecular catalytic systems able to promote high HER activity.     

Dimeric [Mo2S12]2− Cluster: A Molecular Analogue of MoS2 Edges for Superior Hydrogen‐Evolution Electrocatalysis

Proton reduction is one of the most fundamental and important reactions in nature. MoS₂ edges have been identified as the active sites for hydrogen evolution reaction (HER) electrocatalysis. Designing molecular mimics of MoS₂ edge sites is an attractive strategy to understand the underlying catalytic mechanism of different edge sites and improve their activities. Herein we report a dimeric molecular analogue [Mo₂S₁₂]^2?, as the smallest unit possessing both the terminal and bridging disulfide ligands. Our electrochemical tests show that [Mo₂S₁₂]^2? is a superior heterogeneous HER catalyst under acidic conditions. Computations suggest that the bridging disulfide ligand of [Mo₂S₁₂]^2? exhibits a hydrogen adsorption free energy near zero (?0.05 eV). This work helps shed light on the rational design of HER catalysts and biomimetics of hydrogen‐evolving enzymes.     

First-principles Density Functional Theory Elucidation of the Hydrogen Evolution Reaction on TM-promoted TiC2 (TM=Fe,Co, Ni,Cu, Ru,Rh, Pd,Ag, Os,Ir, Pt,and Au)

Single-atom-catalyst-based systems have been attractive by virtue of their desirable catalytic performance. Herein, the possibility of the 15 transition-metal (TM)-promoted (TM=Fe, Co, Ni, Cu, Zn, Ru, Rh, Pd, Ag, Cd, Os, Ir, Pt, Au, and Hg) and their hydrogen evolution reaction (HER) performance were investigated on two-dimensional titanium carbides (TiC₂). It is found that the adsorption strength of TMs on TiC₂ is stronger than that of TMs on γ-graphyne and weaker than that of TMs on Ti₃C₂. Among the fifteen investigated catalysts, Ru−TiC₂, Ag−TiC₂, Ir−TiC₂, Au−TiC₂, and Fe−TiC₂ exhibits overpotential of −0.18, −0.15, −0.18, −0.17, and −0.04 V, respectively. In addition, the Volmer-Tafel step was preferred to the Volmer-Heyrovsky step on Fe−TiC₂. This work suggests that Fe−TiC₂ is possibly a superior HER electrocatalyst.     

Tetrametallic Copper Complex to Nanoscale Copper: Selective and Switchable Dehydrogenation-Hydrogenation under Light

A discrete, photoactive, ultrafine copper nanocluster of fewer than hundreds of atoms with stimuli-responsive switchable redox-active states is highly desired to control two different antagonistic reactions. Herein, a mixed-valent tetrametallic copper complex ( C-1 ) of N−O-N Schiff base ligand is disclosed, in which the five different Cu−Cu interactions were used to generate photoactive nanoscale copper [LCu⁰_n, S-1 ] through the reduction of coordinated imine to the amine of C-1 . The presence of a ligand provides stability and helps to homogenize the material ( S-1 ) in the organic solvent. The cluster showed stimuli (O₂/light)-responsive switching between its reduced ( S-1 ) and oxidized [LCu⁰_n−mCuO_m, S-2 ] states that allows it to serve as a highly and poorly active (bistate, relative rate >5–12 fold) catalyst for the dehydrogenation of alcohols to aldehydes and hydrogenation of nitroaromatics to amino aromatics under the light.     

3D Carbon Foam Supported Edge-Rich N-Doped MoS2 Nanoflakes for Enhanced Electrocatalytic Hydrogen Evolution

Molybdenum disulfide (MoS₂) is one of the most promising alternatives to the Pt-based electrocatalysts for the hydrogen evolution reaction (HER). However, its performance is currently limited by insufficient active edge sites and poor electron transport. Hence, enormous efforts have been devoted to constructing more active edge sites and improving conductivity to obtain enhanced electrocatalytic performance. Herein, the 3D carbon foam (denoted as CF) supported edge-rich N-doped MoS₂ nanoflakes were successfully fabricated by using the commercially available polyurethane foam (PU) as the 3D substrate and PMo₁₂O₄₀³⁻ clusters (denoted as PMo₁₂) as the Mo source through redox polymerization, followed by sulfurization. Owing to the uniform distribution of nanoscale Mo sources and 3D carbon foam substrate, the as-prepared MoS₂-CF composite possessed well-exposed active edge sites and enhanced electrical conductivity. Systematic investigation demonstrated that the MoS₂-CF composite showed high HER performance with a low overpotential of 92 mV in 1.0 m KOH and 155 mV in 0.5 m H₂SO₄ at a current density of 10 mA cm⁻². This work offers a new pathway for the rational design of MoS₂-based HER electrocatalysts.     

One-Step Approach for Constructing High-Density Single-Atom Catalysts toward Overall Water Splitting at Industrial Current Densities

The construction of highly active, durable, and cost-effective catalysts is urgently needed for green hydrogen production. Herein, catalysts consisting of high-density Pt (24 atoms nm⁻²) and Ir (32 atoms nm⁻²) single atoms anchored on Co(OH)₂ were constructed by a facile one-step approach. Remarkably, Pt₁/Co(OH)₂ and Ir₁/Co(OH)₂ only required 4 and 178 mV at 10 mA cm⁻² for hydrogen evolution reaction and oxygen evolution reaction, respectively. Moreover, the assembled Pt₁/Co(OH)₂//Ir₁/Co(OH)₂ system showed mass activity of 4.9 A mg_{noble metal}⁻¹ at 2.0 V in an alkaline water electrolyzer, which is 316.1 times higher than that of Pt/C//IrO₂. Mechanistic studies revealed that reconstructed Ir−O₆ single atoms and remodeled Pt triple-atom sites enhanced the occupancy of Ir−O bonding orbitals and improved the occupation of Pt−H antibonding orbital, respectively, contributing to the formation of the O−O bond and the desorption of hydrogen. This one-step approach was also generalized to fabricate other 20 single-atom catalysts.     

Surface Modulation of Iron-doped MoS2 Nanosheets by Phytic Acid for Enhanced Water Oxidation

Surface modulation and heteroatom doping are important approaches for boosting the electrocatalytic performances of MoS₂ nanosheets. As a molecular electrocatalyst, the natural organic phytic acid (PA) offer attractive intermediate for oxygen evolution reaction (OER). Here, a surface modulation strategy is demonstrated through the decoration of PA onto the basal plane of iron (Fe)-doped MoS₂ nanosheets supported on nickel foam (NF) for boosted OER activity. Experimental results indicate that the PA modification and Fe doping could effectively boost the charge transfer and mass transport during the OER process. Specially, PA2-Fe−MoS₂ grown on NF (PA2-Fe−MoS₂/NF) exhibits excellent OER activity (218 mV@20 mA cm⁻²) and durability, even superior to RuO₂ and many other previously reported OER catalysts. This natural organic molecule modification provides a facile strategy to designing low-cost and efficient electrocatalytic materials.     

A Novel M8L6 Cubic Cage That Binds Tetrapyridyl Porphyrins: Cage and Solvent Effects in Cobalt-Porphyrin-Catalyzed Cyclopropanation Reactions

Confinement of a catalyst can have a significant impact on catalytic performance and can lead to otherwise difficult to achieve catalyst properties. Herein, we report the design and synthesis of a novel caged catalyst system Co−G@Fe₈(Zn−L ⋅ 1)₆ , which is soluble in both polar and apolar solvents without the necessity of any post-functionalization. This is a rare example of a metal-coordination cage able to bind catalytically active porphyrins that is soluble in solvents spanning a wide variety of polarity. This system was used to investigate the combined effects of the solvent and the cage on the catalytic performance in the cobalt catalyzed cyclopropanation of styrene, which involves radical intermediates. Kinetic studies show that DMF has a protective influence on the catalyst, slowing down deactivation of both [Co(TPP)] and Co−G@Fe₈(Zn−L ⋅ 1)₆ , leading to higher TONs in this solvent. Moreover, DFT studies on the [Co(TPP)] catalyst show that the rate determining energy barrier of this radical-type transformation is not influenced by the coordination of DMF. As such, the increased TONs obtained experimentally stem from the stabilizing effect of DMF and are not due to an intrinsic higher activity caused by axial ligand binding to the cobalt center ([Co(TPP)(L)]) . Remarkably, encapsulation of Co−G led to a three times more active catalyst than [Co(TPP)] (TOF_ini) and a substantially increased TON compared to both [Co(TPP)] and free Co−G . The increased local concentration of the substrates in the hydrophobic cage compared to the bulk explains the observed higher catalytic activities.