Noble Metal‐Iron Oxide Hybrid Nanomaterials: Emerging Applications

This account provides an overview of current research activities that focus on the synthesis and applications of nanomaterials from noble metal (e.g., Au, Ag, Pd) and iron oxide (Fe₃O₄) hybrids. An introduction to the synthetic strategies that have been developed for generating M–Fe₃O₄ nanomaterials with different novel structures is presented. Surface functionalization and bioconjugation of these hybrid nanoparticles and nanocomposites are also reviewed. The utilization of the advantageous properties of both noble metals and iron oxide for a variety of applications, such as theranostics, gene delivery, biosensing, cell sorting, bioseparation, and catalysis, is discussed and highlighted. Finally, future trends and perspectives of these sophisticated nanocomposites are outlined. The fundamental requirements underpinning the effective preparation of M–Fe_xO_y hybrid nanomaterials shed light on the future development of heterogeneous catalysts, nanotheranostics, nanomedicines, and other chemical technologies.     

Fabrication and Characterization of Iron (II,III) on Positively Charged Gold Nanoparticles with Application for Magnetically Recoverable Catalysis

An aqueous dispersion was prepared by attaching positively charged gold nanoparticles to the surface of poly-sodium-p-styrenesulfonate-modified Fe₃O₄ nanoparticles. The Fe₃O₄@positively charged gold nanoparticles offer high monodispersion, stability against aggregation, and high magnetization with uniform size. The Fe₃O₄@positively charged gold nanoparticles were efficient and recyclable catalysts due to the formation of a positively charged gold layer on the surface of Fe₃O₄ nanoparticles and were stable in aqueous solution for over forty-eight hours and hence may have a broad range of applications.     

Mechanism of Iron Oxide Formation from Iron Pentacarbonyl‐Doped Low‐Pressure Hydrogen/Oxygen Flames

A chemical reaction mechanism was developed for the formation of iron oxide (Fe₂O₃) from iron pentacarbonyl (Fe(CO)₅) in a low‐pressure hydrogen–oxygen flame reactor. In this paper, we describe an extensive approach for the flame‐precursor chemistry and the development of a novel model for the formation of Fe₂O₃ from the gas phase. The detailed reaction mechanism is reduced for the implementation in two‐dimensional, reacting flow simulations. The comprehensive simulation approach is completed by a model for the formation and growth of the iron oxide nanoparticles. The exhaustive and compact reaction mechanism is validated using experimental data from iron‐atom laser‐induced fluorescence imaging. The particle formation and growth model are verified with new measurements from particle mass spectrometry.     

Polymer/Iron Oxide Nanoparticle Modified Glassy Carbon Electrodes for the Enhanced Detection of Epinephrine

Novel electrochemical sensors for epinephrine (EP) based on a glassy carbon electrode (GCE) modified with a redox polymer film and iron (III) oxide nanoparticles (Fe₂O₃NP) have been developed. Two redox polymers‐poly(brilliant cresyl blue) (PBCB) and poly(Nile blue) (PNB), and two different architectures‐polymer/Fe₂O₃/GCE and Fe₂O₃/polymer/GCE were investigated. The electrochemical oxidation of epinephrine at the modified electrodes was performed by differential pulse voltammetry (DPV), in pH 7 electrolyte, and the analytical parameters were determined. The results show enhanced performance, more sensitive responses and lower detection limits at the modified electrodes, compared to other electrochemical epinephrine sensors reported in the literature. The best voltammetric response with the lowest detection limit was obtained for the determination of epinephrine at PBCB/Fe₂O₃/GCE. The novel sensors are reusable, with good reproducibility and stability, and were successfully applied to the determination of epinephrine in commercial injectable adrenaline samples.     

Bacitracin‐Conjugated Superparamagnetic Iron Oxide Nanoparticles: Synthesis,Characterization and Antibacterial Activity

Bacitracin‐conjugated superparamagnetic iron oxide (Fe₃O₄) nanoparticles were prepared by click chemistry and their antibacterial activity was investigated. After functionalization with hydrophilic and biocompatible poly(acrylic acid), water‐soluble Fe₃O₄ nanoparticles were obtained. Propargylated Fe₃O₄ nanoparticles were then synthesized by carbodiimide reaction of propargylamine with the carboxyl groups on the surface of the iron oxide nanoparticles. By further reaction with N₃‐bacitracin in a Cu^I‐catalyzed azide–alkyne cycloaddition, the magnetic Fe₃O₄ nanoparticles were modified with the peptide bacitracin. The functionalized magnetic nanoparticles were characterized by powder X‐ray diffraction, X‐ray photoelectron spectroscopy, TEM, zeta‐potential analysis, FTIR spectroscopy and vibrating‐sample magnetometry. Cell cytotoxicity tests indicate that bacitracin‐conjugated Fe₃O₄ nanoparticles show very low cytotoxicity to human fibroblast cells, even at relatively high concentrations. In view of the antibacterial activity of bacitracin, the biofunctionalized Fe₃O₄ nanoparticles exhibit an antibacterial effect against both Gram‐positive and Gram‐negative organisms, which is even higher than that of bacitracin itself. The enhanced antibacterial activity of the magnetic nanocomposites allows the dosage and the side effects of the antibiotic to be reduced. Due to the antibacterial effect and magnetism, the bacitracin‐functionalized magnetic nanoparticles have potential application in magnetic‐targeting biomedical applications.     

Iron Oxide Nanoparticles: Biosynthesis,Magnetic Behavior,Cytotoxic Effect

Iron oxide nanoparticles have attracted much attention because of their superparamagnetic properties and their potential applications in many fields such as magnetic storage devices, catalysis, sensors, superparamagnetic relaxometry (SPMR), and high-sensitivity biomolecule magnetic resonance imaging (MRI) for medical diagnosis and therapeutics. In this study, iron oxide nanoparticles (Fe₂O₃ NPs) have been synthesized using a taranjabin (camelthorn or persian manna) aqueous solution. The synthesized Fe₂O₃ NPs were identified through powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), field energy scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDX), vibrating-sample magnetometer (VSM) and Raman technics. The results show that the nanoparticles have a hexagonal structure with 20 to 60 nm in size. The cytotoxic effect of the synthesized nanoparticles has been tested upon application against lung cancer cell (A549) lines. It was found that there is no cytotoxic activity at lower concentrations of 200 μg/mL. The ability of the synthesized nanoparticles for lead removal in wastewaters was tested. Results show that highest concentration of adsorbent (50 mg/L) has maximum removal efficiency (96.73 %). So, synthesized Fe₂O₃ NPs can be a good candidate to use as heavy metals cleaner from contaminated waters.     

Gold nanoparticles as dehydrogenase mimicking nanozymes for estradiol degradation

Nanozyme catalysis has been mainly focused on a few chromogenic and fluorogenic substrates, while environmentally and biologically important compounds need to be tested to advance the field. In this work, we studied oxidation of estradiol (E2) in the presence of various nanomaterials including gold nanoparticles (AuNPs), nanoceria (CeO₂), Fe₃O₄, Fe₂O₃, MnO₂ and Mn₂O₃, and found that AuNPs had a dehydrogenase-mimicking activity to convert E2 to estrone (E1). This conversion was monitored using HPLC. The reaction was faster at higher pH and reached saturation at pH 8. Smaller AuNPs had a higher catalytic efficiency and 5 nm AuNPs were 4.8-fold faster than 13 nm at the same total surface area. Finally, we tried 17α-ethinylestradiol (EE2) as a substrate and found that 5 nm AuNPs can catalyze EE2 oxidation in the presence of H₂O₂. This work indicated that some nanomaterials can affect environmentally important hormones via oxidation reactions, and this study has expanded the scope of substrate of nanozymes.     

Magnetic and Thermal Properties of Novel Poly(ether-amide)/Fe3O4 Nanocomposite Containing Phosphine Oxide Group

New poly(ether-amide) nanocomposite containing phosphine oxide was prepared via solution polymerization process from synthesized poly(ether-amide) and Fe₃O₄ nanoparticles in a solution of N,N-dimethylformamide. Uniform monodisperse Fe₃O₄ nanoparticles were synthesized at room temperature via a facile sonochemical reaction. Poly(ether-amide) (PEA) as the polymer matrix was synthesized from reaction of 1,4-(4-carboxy phenoxy)butane (1) and bis(3-amino phenyl)phenyl phosphine oxide (2) via a direct polycondensation reaction. Nanoparticle and nanocomposite were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy and Fourier transform infrared. The effect of the presence of Fe₃O₄ nanoparticles on the thermal properties of PEA was studied using thermogravimetric analysis in nitrogen atmospheres. The magnetic properties of the sample were also investigated using an alternating gradient force magnetometer. We found that the Fe₃O₄ nanoparticles exhibit a ferromagnetic behaviour with a saturation magnetization of 59 emu/g and a coercivity of 104 Oe at room temperature. The coercivity of PEA/Fe₃O₄ nanocomposites is found to be 126 Oe, higher than 104 Oe which is obtained for Fe₃O₄.     

钴掺杂的磁性氧化铁纳米粒子的可控合成

通过油酸盐前驱体高温热解法制备出大小均匀的钴掺杂四氧化三铁球形纳米粒子, 其钴/铁摩尔比可以通过调节油酸钴与油酸铁的比例进行调变. 当产物中钴/铁摩尔比从0.024增加到0.156, 所制备的氧化铁纳米粒子的饱和磁矩从39 emu·g^-1逐渐减小到30 emu·g^-1, 而矫顽力从0 Oe升至190 Oe. 在305℃下, 随着反应体系的热解时间由0.5 h 增加到3 h, 所制备出的氧化铁纳米粒子尺寸逐渐由7 nm增加到14 nm. 热解时间较短时, 以高价态的四氧化三铁的晶型为主, 辅之以少量的氧化亚铁; 热解时间增加至2 h, 产物的晶型为四氧化三铁和氧化亚铁的复合物; 而继续增加热解时间至3 h, 除四氧化三铁和氧化亚铁之外, 还出现少量的零价态的CoFe合金, 说明铁(钴)元素经历了由三价到二价, 最后被还原为零价的过程. 随着反应温度的升高, 产物的尺寸逐渐增大, 同时产物中氧化亚铁的含量增多.     

Superparamagnetic POT/Fe3O4 nanoparticle composites with supported Au nanoparticles as recyclable high-performance nanocatalysts

A novel method has been developed to successfully synthesize Fe₃O₄ nanoparticles with tunable size and morphology supported on shells of poly(o-Toluidine)(POT) hollow microspheres. The as-prepared POT/Fe₃O₄ nanoparticle composites can be used as novel and magnetic-responsive catalyst supports to produce highly efficient and recyclable noble metal catalysts. The size of Fe₃O₄ nanoparticles supported on shells of POT hollow microspheres can be tuned from 4 to 12 nm by changing the concentration of Fe ions. The roles of the doping acid of POT and Zeta potentials of Fe₃O₄ nanoparticles and POT in the formation of the POT/Fe₃O₄ nanoparticle composites were discussed. Furthermore, gold nanoparticles that were supported on the as-synthesized POT/Fe₃O₄ nanoparticle composites have been achieved by utilizing the reactivity of POT towards Au ions. The size of gold nanoparticles can be tuned by altering the concentration of HAuCl₄. Finally, the catalytic activity of the obtained POT/Fe₃O₄/Au composites for 4-nitrophenol (4NP) reduction is investigated. The results demonstrate that such magnetic-responsive polymer-supported gold nanoparticles can be easily recovered and reused five times still remains high catalytic performance, which indicate their potential applications in the field of catalysis.     

Controllable Synthesis of Mesoporous Iron Oxide Nanoparticle Assemblies for Chemoselective Catalytic Reduction of Nitroarenes

Iron(III) oxide is a low‐cost material with applications ranging from electronics to magnetism, and catalysis. Recent efforts have targeted new nanostructured forms of Fe₂O₃ with high surface area‐to‐volume ratio and large pore volume. Herein, the synthesis of 3D mesoporous networks consisting of 4–5 nm γ‐Fe₂O₃ nanoparticles by a polymer‐assisted aggregating self‐assembly method is reported. Iron oxide assemblies obtained from the hybrid networks after heat treatment have an open‐pore structure with high surface area (up to 167 m² g^?1) and uniform pores (ca. 6.3 nm). The constituent iron oxide nanocrystals can undergo controllable phase transition from γ‐Fe₂O₃ to α‐Fe₂O₃ and to Fe₃O₄ under different annealing conditions while maintaining the 3D structure and open porosity. These new ensemble structures exhibit high catalytic activity and stability for the selective reduction of aryl and alkyl nitro compounds to the corresponding aryl amines and oximes, even in large‐scale synthesis.     

Nanostructured Iron Oxide Platform for Impedimetric Cholesterol Detection

A nanostructured iron oxide (NanoFe₃O₄, particle size ca. 25 nm and roughness ca. 21 nm) film deposited onto a hydrolyzed indium‐tin‐oxide (ITO) coated glass plate has been used to immobilize cholesterol oxidase (ChOx) to fabricate an impedimetric cholesterol sensor. Electrochemical studies reveal that surface charged Fe₃O₄ nanoparticles provide better conformation for ChOx loading resulting in enhanced electron transfer between ChOx and the electrode. Impedimetric response studies of the ChOx/NanoFe₃O₄/ITO bioelectrode exhibit improved linearity (2.5–400 mg/dL), low detection limit (0.25 mg/dL), fast response time (25 s), high sensitivity (86 Ω/mg dL^?1/cm^?2) and a low value of the Michaelis‐Menten constant (K_m, 0.8 mg/dL) with a regression coefficient of 0.997.     

Au-Fe3O4 heterostructures for catalytic,analytical, and biomedical applications

Au-Fe₃O₄ heterostructures including dumbbell-like dimer, core-shell structure, and flower-type nanoparticles (NPs), attract much attention due to their multiple modifiable surfaces and unique properties coming from either Au or Fe₃O₄ nanoparticles. This review focuses on the preparation methods and biomedical applications of these heterogenous NPs in the fields of catalysis, assay, multimodal imaging, and combination therapy.     

Sol‐Gel Related Solvothermal Procedure to Prepare Iron Oxide Fibers

A sol‐gel‐related solvothermal process is developed to prepare iron oxide fibers. Continuous iron oxide gel fiber was drawn from spinnable sol using ferric alkoxide as the precursor, and hollow hematite fiber was obtained after the gel fiber was treated by hydroncarbon thermal reaction. The as‐prepared hollow fiber was several millimeters in length, 4～15 µm in outer diameter, and ～3 µm in wall thickness. Substituting the hydrocarbon with triethylamide, Fe₃O₄ solid fiber composed of nanorods can be obtained. Incubated at 200°C in air for only 1 hour, Fe₃O₄ was oxidated to γ‐Fe₂O₃ fiber. Possible mechanisms involved in formation of these nanostructured iron oxide fibers also are discussed.     

Reduction Dehydration of Iron Oxide Hydroxide by iron metal in aqueous medium

The reductive dehydration of iron hydroxide (FeOOH) by iron metal in aqueous solutions of ferrous sulphate was found to occur. These reactions of α, β, γ FeOOH and Fe(OH)₃ · nH₂O respectively were carried out in 0.01–1 mol iron(II) sulphate solutions and over the temperature range of 80–100°C to produce Fe₃O₄ in all cases. The reaction rate decreases with increasing Fe²⁺ concentration and depends on the total concentration of sulphate anion. The presence of iron(II) chloride has an inhibiting effect.     

A Facile Approach to Fabricate Water‐soluble Au‐Fe3O4 Nanoparticle for Liver Cancer Cells Imaging

Au‐Fe₃O₄ nanoparticles were widely used as nanoplatforms for biologic applications through readily further functionalization. Dopamine (DA)‐coated superparamagnetic iron oxide (SPIO) nanoparticles (DA@Fe₃O₄) have been successfully synthesized using a one‐step process by modified coprecipitation method. Then 2–3 nm gold nanoparticles were easily conjugated to DA@Fe₃O₄ nanoparticles by the electrostatic force between gold nanoparticles and amino groups of dopamine to afford water‐soluble Au‐Fe₃O₄ hybrid nanoparticles. A detailed investigation by dynamic light scatting (DLS), transmission electron microscopy (TEM), fourier transform infrared (FT‐IR) and X‐ray diffraction (XRD) were performed in order to characterize the physicochemical properties of the hybrid nanoparticles. The hybrid nanoparticles were easily functionalized with a targeted small peptide A54 (AGKGTPSLETTP) and fluorescence probe fluorescein isothiocyanate (FITC) for liver cancer cell BEL‐7402 imaging. This simple approach to prepare hybrid nanoparticles provides a facile nanoplatform for muti‐functional derivations and may be extended to the immobilization of other metals or bimolecular on SPIO surface.     

Michael addition of 1,3-dicarbonyl compounds catalyzed by iron oxide nanoparticles

Several iron oxides nanoparticles (Fe₂O₃@Fe₂O₃, Fe°@Fe₂O₃, GO@Fe₂O₃ and calcinated Fe₂O₃) have been assessed as catalysts in the 1,4-addition of a cyclic β-ketoester onto methyl vinyl ketone under neat conditions. It appeared that calcinated Fe₂O₃NP are efficient catalysts at 1?mol% loading for the Michael addition of 1,3-dicarbonyl compounds onto various enones.     

Thermal Plasma Synthesis of Superparamagnetic Iron Oxide Nanoparticles

Superparamagnetic iron oxide nanoparticles were synthesized by injecting ferrocene vapor and oxygen into an argon/helium DC thermal plasma. Size distributions of particles in the reactor exhaust were measured online using an aerosol extraction probe interfaced to a scanning mobility particle sizer, and particles were collected on transmission electron microscopy (TEM) grids and glass fiber filters for off-line characterization. The morphology, chemical and phase composition of the nanoparticles were characterized using TEM and X-ray diffraction, and the magnetic properties of the particles were analyzed with a vibrating sample magnetometer and a magnetic property measurement system. Aerosol at the reactor exhaust consisted of both single nanocrystals and small agglomerates, with a modal mobility diameter of 8?C9?nm. Powder synthesized with optimum oxygen flow rate consisted primarily of magnetite (Fe₃O₄), and had a room-temperature saturation magnetization of 40.15 emu/g, with a coercivity and remanence of 26 Oe and 1.5 emu/g, respectively.     

Geometrical Structure of the Gold–Iron(III) Oxide Interfacial Perimeter for CO Oxidation

The geometrical structure of the Au‐Fe₂O₃ interfacial perimeter, which is generally considered as the active sites for low‐temperature oxidation of CO, was examined. It was found that the activity of the Au/Fe₂O₃ catalysts not only depends on the number of the gold atoms at the interfacial perimeter but also strongly depends on the geometrical structure of these gold atoms, which is determined by the size of the gold particle. Aberration‐corrected scanning transmission electron microscopy images unambiguously suggested that the gold particles, transformed from a two‐dimensional flat shape to a well‐faceted truncated octahedron when the size slightly enlarged from 2.2 to 3.5 nm. Such a size‐induced shape evolution altered the chemical bonding environments of the gold atoms at the interfacial perimeters and consequently their catalytic activity. For Au particles with a mean size of 2.2 nm, the interfacial perimeter gold atoms possessed a higher degree of unsaturated coordination environment while for Au particles with a mean size of 3.5 nm the perimeter gold atoms mainly followed the atomic arrangements of Au {111} and {100} facets. Kinetic study, with respect to the reaction rate and the turnover frequency on the interfacial perimeter gold atom, found that the low‐coordinated perimeter gold atoms were intrinsically more active for CO oxidation. ¹⁸O isotopic titration and Infrared spectroscopy experiments verified that CO oxidation at room temperature occurred at the Au‐Fe₂O₃ interfacial perimeter, involving the participation of the lattice oxygen of Fe₂O₃ for activating O₂ and the gold atoms for CO adsorption and activation.     

Iron oxide modified with pyridyl‐triazole ligand for stabilization of gold nanoparticles: An efficient heterogeneous catalyst for A3 coupling reaction in water

Fe₃O₄ nanoparticles were modified with pyridyl‐triazole ligand and the new magnetic solid was applied for the stabilization of very small and uniform gold nanoparticles. The resulting magnetic material, Fe₃O₄@PT@Au, was characterized using various methods. These gold nanoparticles on a magnetic support were applied as an efficient heterogeneous catalyst for the three‐component reaction of amines, aldehydes and alkynes (A³ coupling) in neat water with 0.01 mol% Au loading. Using magnetic separation, this catalyst could be recycled for seven consecutive runs with very small decrease in activity. Characterization of the reused catalyst did not show appreciable structural modification.