A pure blue light emitting binaphthyl derivative：Synthesis and properties

A binaphthyl derivative with pyrene on 3 and 3＇ positions was synthesized and characterized via Suzuki coupling reaction. Emission maximum in solution was located at 390 nm with a quantum efficiency of 68% by taking 9,10-diphenyl anthracene as reference,while it is shifted to 450 nm with FWHM of 104 nm resulting from aggregation state in solid film.Glass transition temperature（Tg）and decomposition temperature were measured to be 184 and 447℃,respectively,by DSC and TGA.Unlike its photoluminescence spectrum,electroluminescent spectrum peaked at about 460 nm and shows a FWHM of 69 nm corresponding to a pure blue emission.The turn-on voltage,luminance and efficiency maximum were 5 V,2953 cd/m^2 and 1.37cd/A with CIE color coordinate of（0.16,0.15）,in the device structure of ITO/NPB（40nm）/PY-BN-PY（15nm）/BPhen（40nm）/Mg：Ag.     

Studies on the Synthesis,Crystal Structure and Quantum Chemistry of Di（o-cyanobenzyl）tin Bis（quinoline-2-carboxylate）

Di（o-cyanobenzyl）tin bis（quinoline-2-carboxylate） was synthesized by the reaction of tri（o-cyanobenzyl）tin chloride with quinoline-2-carboxylic acid. The molecular structure of the compound was characterized by elemental analysis, IR, 1H NMR and X-ray diffraction. Crystal data for the compound： tficlinic, space group P1, a = 0.80734（7）, b = 1.00681（9）, c = 1.04811（9） nm, a = 81.7570（10）, β = 7.7240（10）,γ = 81.2850（10）°, V = 0.77581（12） nm3, Z = 1, Dc = 1.488 g/cm3, μ（MoKa） = 0.870 mm^-1 and F（000） = 350. The final R= 0.0204 and wR= 0.0530 for 2677 observed reflections with I 〉2σ（I）, and R = 0.0208 and wR = 0.0532 for all reflections. The molecular structure adopts a distorted octahedral geometry around the Sn atom. The title compound molecules are connected via hydrogen bonding interactions to form a 3D network structure. Quantum chemistry calculation study on the title compound has been performed by means of G98W package at the Lanl2dz basis set. The stability of the compound, orbital energies and some frontier molecular orbital composition characteristics have also been investigated.     

Effect of Molecular Weight on the Properties of Poly（butylene succinate）

Poly（butylene succinate） （PBS） with different molecular weight was synthesized from 1, 4-butanediol and succinic acid by direct melt condensation. The synthesized PBS was identified by IH-NMR and FTIR spectrometry. The molecular weight was calculated from the intrinsic viscosity, and its value was between 20000 and 70000. The crystallization behavior and crystal morphology as function of molecular weight were investigated by DSC and PLM, respectively. The mechanical properties and hydrolytic degradation behaviors related with change of molecular weight were also studied in this work. The results demonstrated that the properties of PBS were determined by both molecular weight and crystallization properties （crystallinity as well as crystal morphology）. Our work is important for the design and preparation of PBS with proper molecular weight for its practical application.     

1-（（12-Bromododecyl）oxy）-4-（（4-（4-pentylcyclohexyl） phenyl）ethynyl） benzene：Liquid crystal with aggregation-induced emission characteristics

The luminescent liquid crystals （LLCs） are expected to solve the conflicts between the aggregation caused quenching and the requirement of aggregation or self-organization for LCs. Herein, we developed a new strategy of applying aggregation-induced emission （AIE） phenomenon to the molecular design of LCs towards LLCs. In this report, a calamitic liquid crystal based on tolane with AIE characteristics was successfully synthesized and the chemical structure was characterized by 1H, 13C NMR, and matrix-assisted laser desorption/ionization time-of-flight （MALDI-TOF） high-resolution mass spectra. The fluorescence behavior was studied by fluorescence spectroscopy and the liquid crystal phase behaviors were investigated by differential scanning calorimetry （DSC）, polarized optical microscopy （POM）. The crystal structure was obtained by X-ray diffraction crystallography with P1 space group. Results demonstrated that the sample was AIE active and the LC phases sequence during cooling was nematic, smectic C and smectic B phase.     

SYNTHESIS, CHARACTERIZATION, THERMAL DEGRADATION AND ELECTROCHEMICAL PROPERTIES OF OLIGO-4-m-TOLYLAZOMETHINEPHENOL

The oxidative polycondensation reaction conditions of 4-m-tolylazomethinephenol （4-TAMP） in the presence of air O2 and NaOCl as oxidants were studied in an aqueous alkaline medium between 50 and 90℃. The structures of the obtained monomer and oligomer were confirmed by FT-IR, UV-Vis, ^1H- and ^13C-NMR and elemental analysis techniques. The physical characterization was made by TG-DTA, size exclusion chromatography （SEC） and solubility tests. At the optimum reaction conditions, the yield of oligo-4-m-tolylazomethinephenol （O-4-TAMP） was found to be 62.50% （for air O2 oxidant） and 90.0% （for NaOCl oxidant）, respectively. According to the SEC analysis, the number-average molecular weight （Mn）, weight-average molecular weight （Mw） and polydispersity index （PDI） values of O-4-TAMP were found to be 2310, 2610 g tool 1 and 1. 13, respectively, using air O2, and 1390, 1710 g mol^-1 and 1.23, using NaOCl, respectively. According to TG-DTA analyses, O-4-TAMP was more stable than 4-TAMP against thermal decomposition. The weight losses of 4-TAMP and O-4-TAMP were found to be 68% and 58% at 1000℃. Electrical conductivity of the O-4-TAMP was measured, showing that the polymer is a typical semiconductor. Electrochemically, the highest occupied molecular orbital （HOMO）, the lowest unoccupied molecular orbital （LUMO） and electrochemical energy gaps （E＇g） for 4-TAMP are -5.96, -3.22 and 2.74 eV, respectively. The HOMO, LUMO and （E＇g） for O-4-TAMP are -5.78, -3.44 and 2.34 eV, respectively. According to UV-Vis measurements, optical band gaps （Eg） of 4-TAMP and O-4-TAMP were found to be 3.45 and 3. 1 0 eV, respectively.     

SYNTHESIS OF CROSS-CONJUGATED （p-PHENYLENE）S-POLY（p- PHENYLENEVINYLENE）S HYBRIDS WITH LOW CONTENT OF STRUCTURAL DEFECTS

The novel shish-kebab-type liquid crystalline cross-conjugated （p-phenylene）s-poly（p-phenylenevinylene）s hybrid was synthesized through Gilch polymerization. Their structures and properties were characterized by NMR, GPC, DSC, X-ray diffraction and polarizing optical microscope （POM）. ^1H-NMR investigation of the polymers indicates that the shish-kebab-structure has a strong ability to suppress the structural defects in the polymers. The polymers are enantiotropic liquid crystals. The melting point （Tm） of the polymers decreases when the length of the alkoxy tails of the mesogenic units increases. The mesophase was identified by X-ray diffraction method. They showed not only a smectic LC phase, but also a strong green fluorescence in chloroform. The maximum absorption band of the ＂kebabs＂ of the two, 5-bis（4＇- alkoxyphenyl）benzene at 280 nm did not appear in absorption spectra of the polymers. The same phenomena were also observed in the fluorescence spectra. These results imply that the polymers have formed a cross-conjugated uniform structure and achieved an extended n-conjugation polymer.     

Synthesis and characterization of an acrylate polymer containing chlorine-1,3-dioxalane groups in side chains

Poly[2-（4-chlorophenyl）-1,3-dioxolan-4-yl]methyl acrylate,poly（CPhDMA）,was synthesized with radical polymerization process using 2,2′-azobisisobutyronitrile as radical initiator in 1,4-dioxane at 60℃.The structure of poly（CPhDMA） was confirmed by means of UV-Vis,FT-IR,¹H-NMR,and ¹³C-NMR spectral techniques.The molecular weight distribution values of the polymer were determined with gel permeation chromatography（GPC）.The number-average molecular weight（M_n）,weight-average molecular weight（M_W） and polydispersity index（PDI） values of poly（CPhDMA） were determined to be 10300,21600 and 2.097,respectively.The thermal degradation kinetics of the polymer was investigated by using TG/DTG-DTA and DSC analyses at different heating rates in dynamic nitrogen atmosphere.The apparent activation energy values obtained by Flynn-Wall-Ozawa and Friedman methods were found to be 91.68 and 85.23 kJ mol^-1,respectively,for thermal decomposition of poly（CPhDMA）.Also,the thermal degradation activation energy value of poly（CPhDMA） was calculated by using the Kissinger method based on the DTG,DTA and DSC data.Then the mechanism function of it was determined by master plots method.Finally,electrical and optical properties of poly（CPhDMA） were determined by four-point probe and UV-Vis techniques,respectively.     

A novel spectrophotometric determination of copper（Ⅱ） with bromosulphonazo Ⅲ

A novel chromogenic reaction involving copper（Ⅱ） and bromosulphonazo Ⅲ （Br-SAZⅢ） in hexamethylenetetramine- hydrochloric buffer solution was investigated. The results showed that a blue complex of copper（Ⅱ） and bromosulphonazo Ⅲ was formed with a molar ratio of 1：1. The apparent molar absorptivity was 3.3×10^5Lmol-1cm-1 and the maximum absorption peak was at 616.8 nm. The proposed procedure was used for quantitative estimation of Cu（II） in the concentration range of 0-1.024μg/mL with the detection limit （3σ） of 7.03 × 10^-4 μg/mL （n = 20）. The relative standard deviations （RSDs） were 0.56-4.68%. Under the optimized conditions, total copper in the vegetables and tea was successfully determined. 2007 Li Yuan. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.     

New family of highly emissive,soluble poly(1,4‐fluorenylenevinylene) derivatives: Synthesis and characterization

A new poly(arylene vinylene) derivative, poly(1,4‐fluorenylenevinylene), with the advantages of poly(p‐phenylene vinylene) and polyfluorene (PF), was designed, synthesized, and characterized. The polymer showed a defect‐free structure and a number‐average molecular weight of 32,600. The resulting polymer was thermally stable with a high glass‐transition temperature (200 °C) and was readily soluble in common organic solvents. The polymer film showed a maximum emission at 515 nm and had a photoluminescence quantum yield of 58 ± 5%. A cyclic voltammetry study revealed that the highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels of the polymer were 2.9 and 5.51 eV, respectively. The double‐layer light‐emitting‐diode devices fabricated from the polymer emitted bright green light with a maximum around 515 nm. The device showed a maximum luminous efficiency of 0.13 cd/A and a maximum luminance value of 600 cd/m² at 17 V. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6515–6523, 2005     

Hyperbranched poly(arylene ethynylene)s with triphenylamine core for polymer light‐emitting diodes

A series of light‐emitting hyperbranched poly(arylene ethynylene)s (HB‐PAEs) were prepared by the Sonogashira coupling from bisethynyl of carbazole, fluorene, or dialkoxybenzenes (A₂ type) and tris(4‐iodophenyl)amine (B₃ type). For comparison, two linear polymers (L‐PAEs) of the HB analogs were also synthesized. The polymers were characterized by Fourier transform infrared, NMR, and GPC. The HB polymers showed excellent solubility in chloroform, THF, and chlorobenzene when compared with their linear analogs. The number‐average molecular weight (M_n) of the polymers determined from GPC was found to be in the range of 18,600–34,200. The polymers were thermally stable up to 298–330 °C with only 5% weight loss. The absorption maxima of the polymers were between 354 and 411 nm with optical band gap in the range of 2.5–2.9 eV. The HB polymers were found to be highly fluorescent with photoluminescence quantum yields around 33–42%. The highest occupied molecular orbital energy levels of the polymers calculated from onset oxidation potentials were found to be in the range from ?5.83 to ?6.20 eV. Electroluminescence (EL) properties of three HB‐PAEs and one L‐PAE were investigated with device configuration ITO/PEDOT:PSS/Polymer/LiF/Al. The EL maxima of HB‐PAEs were found to be in the range of 507–558 nm with turn‐on voltages around 7.5–10 V and maximum brightness values of 316–490 cd/m². At the same time, linear analog of one HB‐PAE was found to show a maximum brightness of 300 cd/m² at a turn‐on voltage of 8.2 V. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and properties of new orange red light‐emitting hyperbranched and linear polymers derived from 3,5‐dicyano‐2,4,6‐tristyrylpyridine

Two new orange red light‐emitting hyperbranched and linear polymers, poly(pyridine phenylene)s P1 and P2, were prepared by the Heck coupling reaction. In particular, an A₂ + B₃ approach was developed to synthesize conjugated hyperbranched polymer P2 via one‐pot polycondensation. The polymers were characterized by NMR, Fourier transform infrared, ultraviolet–visible, and elemental analysis. They showed excellent solubility in common solvents such as tetrahydrofuran, CH₂Cl₂, CHCl₃, and N,N‐dimethylformamide and had high molecular weights (up to 6.1 × 10⁵ and 5.8 × 10⁵). Cyclic voltammetry studies revealed that P2 had a low‐lying lowest unoccupied molecular orbital energy level of ?3.22 eV and a highest occupied molecular orbital energy level of ?5.43 eV. The thin film of P2 emitted strong orange‐red photoluminescence at 595 nm. A double‐layer light‐emitting diode fabricated with the configuration of indium tin oxide/P2/tris(8‐hydroxy‐quinoline)aluminum/Al emitted orange‐red light at 599 nm, with a brightness of 662 cd/m² at 7 V and a turn‐on voltage of 4.0 V; its external quantum efficiency was calculated to be 0.19% at 130.61 mA/cm². This indicated that this new electroluminescent polymer (P2) based on 3,5‐dicyano‐2,4,6‐tristyrylpyridine could possibly be used as an orange‐red emitter in polymer light‐emitting displays. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 493–504, 2005     

Synthesis of poly(N‐9‐ethylcarbazole‐exo‐norbornene‐5,6‐dicarboximide) for hole‐transporting layer in hybrid organic light‐emitting devices

We synthesized new polynorbornene dicarboximide (PCaNI) functionalized with hole‐transporting carbazole moieties and its copolymer (PCaNA) by ring‐opening metathesis polymerization (ROMP), where the PCaNA was further reacted with 3‐amino‐triethoxysilane to prepare PCaNI/silica hybrid. We also investigated the feasibility of PCaNI and PCaNI/silica hybrid (PCaSi) as a hole‐transporting material for hybrid organic light emitting devices (HOLEDs). To improve the performance of the PCaNI‐based HOLEDs, N,N′‐diphenyl‐N,N′‐(3‐methylphenyl)‐[1,1′‐biphenyl]‐4‐4′‐diamine (TPD) was also introduced into the PCaNI matrix. Results showed that PCaNI exhibited high glass transition temperature (～260 °C) and high optical transparency in the visible region. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of PCaNI were measured as 5.6 and 2.2 eV, while the TPD‐doped PCaNI showed 5.7 eV (HOMO) and 2.6 eV (LUMO). The PCaNI/silica hybrid nanolayers showed excellent solvent resistance due to the formation of covalent bonds between ITO and PCaNI. The HOLEDs with PCaNI/TPD or PCaSi/TPD hybrid nanolayers exhibited relatively higher luminance (～10,000 cd/m²), lower operating voltage (～6.5 V at 300 cd/m²), and higher current efficiency (～2.7 cd/A). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,characterization, and electroluminescent performance of a novel copolyfluorene containing pendant crown ether groups

Copolyfluorene PFC containing pendant crown ether moieties was prepared by the palladium‐catalyzed Suzuki coupling reaction. The photo‐physical and electrochemical properties were investigated by absorption, photoluminescence (PL) spectroscopy, and cyclic voltammetry to elucidate the influence of the crown ether groups. In film state, its PL spectra (peaked at 430 and 452 nm) show noticeable red‐shift relative to 423 and 448 nm of poly(9,9‐dihexylfluorene) ( PF ). Thermal annealing leads to appearance of new emission at about 520 nm which has been attributed to formation of excimer. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of PFC were estimated to be ?5.68 and ?2.65 eV which contributed to balanced charges injection. Double‐layer electroluminescent device using PFC as emitting layer (ITO/PEDOT:PSS/ PFC /Ca/Al) revealed maximum luminance (7910 cd/m²) and maximum luminance efficiency (2.3 cd/A) superior to those of PF device (860 cd/m², 0.29 cd/A). Moreover, inserting a PFC layer between the PF emitting layer and calcium cathode led to reduced turn‐on voltage (4.1 V), much lower than 7.1 and 6.6 V of the double‐layer PFC and PF devices, respectively, and enhanced device performance (2800 cd/m² and 0.53 cd/A). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2985–2995, 2009     

Construction of a Hexameric Zn(II)‐metallomacrocycle and its Photo‐ and Electroluminescence Properties: [Zn6(O‐hexyl‐3,5‐bis(2,2′:6′,2″‐terpyridine)phenol)6(BF4)12]

Summary: An O‐hexyl‐3,5‐bis(terpyridine)phenol ligand has been synthesized and transformed into a hexagonal Zn(II)‐metallomacrocycle by a facile self‐assembly procedure capitalizing on terpyridine‐Zn(II)‐terpyridine connectivity. The structural composition was confirmed by NMR and mass spectral techniques; photo‐ and electroluminescence properties were also investigated. The OLED device shows green electroluminescent emission at 515 nm with a maximum luminance of 39 cd · m⁻² and maximum efficiency of 0.16 cd · A⁻¹.

Structure and electroluminescent properties of the metallomacrocycle investigated.     

Thermally stable red electroluminescent hybrid polymers derived from functionalized silsesquioxane and 4,7‐bis(3‐ethylhexyl‐2‐thienyl)‐2,1,3‐benzothiadiazole

Hyperbranched organic–inorganic hybrid conjugated polymers P1 and P2 were prepared via FeCl₃‐oxiditive polymerization of 4,7‐bis(3‐ethylhexyl‐2‐thienyl)‐2,1,3‐benzothiadiazole ( A ) and octa(3‐ethylhexyl‐2‐thienyl‐phenyl)polyhedral oligomeric silsesquioxane (POSS) ( B ) at different POSS concentrations. Compared to linear polymer PM derived from A , P1 , and P2 exhibit much higher PL quantum efficiency (?_PL‐f) in condensed state with improved thermal stability. ?_PL‐f of P1 and P2 increased by 80% and 400%, and the thermal degradation temperatures of P1 and P2 are increased by 35 °C and 46 °C, respectively. Light‐emitting diodes were fabricated using P1 , P2 , and PM . While the electroluminescent spectra of both P1 and PM show λ_max at 660 nm, P1 exhibits a much narrower EL spectrum and higher electroluminescence (～500%) compared with PM at a same voltage and film thickness. The maximum current efficiency of P1 is more than seven times of that of PM . The turn‐on voltages of the LEDs are in the order of P2 > PM > P1 . LED prepared by blending P1 with MEH‐PPV shows a maximum luminescence of 2.6 × 10³ cd/m² and a current efficiency of 1.40 cd/A, which are more than twice (1.1 × 10³ cd/m²) and five times (0.27 cd/A) of LED of PM /MEH‐PPV blend, respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5661–5670, 2009     

Synthesis of novel nitrogen‐ and sulfur‐containing conjugated polymers used as hole‐transporting materials for organic light‐emitting diodes

Two series of highly soluble novel nitrogen‐ and sulfur‐containing conjugated polymers were synthesized via an acid‐induced self‐polycondensation of functional monomers with methyl sulfinyl and aromatic groups. The well‐defined structures of synthesized polymers were confirmed by their NMR and IR spectra. The highest occupied molecular orbital energy values for these materials, estimated by cyclic voltammetry, showed a broad range of values from about 5.0 to 5.2 eV used as hole‐transport layers (HTL) in two‐layer light‐emitting diodes ITO/HTL/Alq₃/Mg:Ag [ITO = indium tin oxide, and Alq₃ = tris(8‐quinolinato) aluminum]. The typical turn‐on voltage of these diodes was about 4–5 V. The maximum brightness of the device was about 3440 cd/m² at 20 V. The maximum efficiency was estimated to be 0.15 lm/W at 10 V. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1321–1333, 2002     

Synthesis and characterization of color‐stable electroluminescent polymers: Poly(dinaphtho[1,2‐a:1′,2′‐g]‐s‐indacene)s

Two new stepladder conjugated polymers, that is, poly(7,7,15,15‐tetraoctyldinaphtho[1,2‐a:1′,2′‐g]‐s‐indacene) (PONSI) and poly(7,7,15,15‐tetra(4‐octylphenyl)dinaphtho[1,2‐a:1′,2′‐g]‐s‐indacene) (PANSI) with alkyl and aryl substituents, respectively, have been synthesized and characterized. In comparison with poly(indenofluorene)s, both polymers have extended conjugation at the direction perpendicular to the polymer backbone because of the introduction of naphthalene moieties. The emission color of the polymers in film state is strongly dependent on the substituents. While PONSI emits at a maximum of 463 nm, PANSI with the same backbone but aryl substituents displays dramatically redshifted emission with a maximum at 494 nm. Both polymers show stable photoluminescence spectra while annealing at 200 °C in inert atmosphere. The PONSI‐based devices with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al turn on at 3.7 V, and emit at a maximum of 461 nm with the CIE coordinates of (0.19, 0.26), a maximum luminance efficiency of 1.40 cd/A, and a maximum brightness of 2036 cd/m² at 13 V. Meanwhile, the emission color of the devices is independent of driving voltage and keeps unchanged during the continuous operation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4866–4878, 2008     

High electroluminescent properties of conjugated copolymers from poly[9,9‐dioctylfluorenyl‐2,7‐vinylene]‐co‐(2‐(3‐dimethyldodecylsilylphenyl)‐1,4‐phenylene vinylene)] for light‐emitting diode applications

A new series of copolymers with high brightness and luminance efficiency were synthesized using the Gilch polymerization method, and their electro‐optical properties were investigated. The weight‐average molecular weights (M_w) and polydispersities of the synthesized poly(9,9‐dioctylfluorenyl‐2,7‐vinylene) [poly(FV)], poly[2‐(3‐dimethyldodecylsilylphenyl)‐1,4‐phenylenevinylene] [poly(m‐SiPhPV)], and poly[9,9‐di‐n‐octylfluorenyl‐2,7‐vinylene]‐co‐(2‐(3‐dimethyldodecylsilylphenyl)‐1,4‐phenylene vinylene)] [poly(FV‐co‐m‐SiPhPV)] were found to be in the ranges of (8.7–32.6) × 10⁴ and 2.3–5.4, respectively. It was found that the electro‐optical properties of the copolymers could be adjusted by controlling the feed ratios of the comonomers. Thin films of poly(FV), poly(m‐SiPhPV), and poly(FV‐co‐m‐SiPhPV) were found to exhibit photoluminescence quantum yields between 21% and 42%, which are higher than those of MEH‐PPV. Light‐emitting diodes were fabricated in ITO/PEDOT/light‐emitting polymer/cathode configurations using either double layer (LiF/Al) or triple layer (Alq₃/LiF/Al) cathode structures. The performance of the polymer light‐emitting diodes (PLEDs) with triple layer cathodes was found to be better than that of the PLEDs with double layer cathodes in poly(FV) and poly(FV‐co‐m‐SiPhPV). The turn‐on voltages of the PLEDs were in the range of 4.5–6.0 V, with maximum brightness and luminance efficiency up to 9691 cd/m² at 16 V and 3.27 cd/A at 13 V, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5062–5071, 2005