Micellar electrokinetic chromatography as a fast screening method for the determination of 1,4-dihydropyridine calcium antagonists

A micellar electrokinetic chromatographic method (MEKC) was optimized for the separation of six calcium antagonists. The effects of the buffer (concentration and pH), concentration of sodium dodecyl sulphate (SDS), the organic modifier, the injection time, and the voltage applied were studied. A final appropriate electrolyte of 50 mM borate buffer, pH 8.2, containing 20 mM SDS and 15% (v/v) acetonitrile was found to provide the optimum separation with respect to resolution and migration time. The samples were introduced hydrostatically for 4 s at 50 mbar injection pressure and the applied voltage was +25 kV. The screening of the six compounds was achieved in less than 15 min: nifedipine (migration time, tm = 6.9 min), nimodipine (tm = 10.1 min), felodipine (tm = 12.2 min), nicardipine hydrochloride (tm = 12.7 min), lacidipine (tm = 13.5 min) and amlodipine besylate (tm = 14.1 min, tm = 8 min). The method developed showed to be linear at least up to 70 micrograms/ml with a detection limit of about 5 micrograms/ml for each compound. The within-day and inter-day area reproducibility (R.S.D.) were, respectively, lower than 4.8 and 8.6% for six replicate samples.     

Capillary electrophoretic analysis of inorganic anions in atmospheric hailstone samples

Micellar electrokinetic capillary chromatography (MEKC) coupled with sample stacking and polarity switching was investigated for the determination of Viagra (sildenafil citrate, SC) and its metabolite (UK-103,320, UK) in human serum in the concentration range of clinical interest. Human serum samples spiked with SC and UK were eluted with methanol from a C18 cartridge, the extract was evaporated and regenerated in a solution that contained 1 mM phosphate buffer (pH 12.3) and 20% methanol. The MEKC separation was performed using an injection time of 275 s, a polarity switching time of 93 s, a phosphate buffer, (pH 12.3, 15 mM) containing 25 mM sodium dodecyl sulfate as separation electrolyte and a fused-silica capillary. The analysis takes about 6 min and gives satisfactory inter-day precision with respect to migration times and linear responses over the 80-900 ng/ml concentration range investigated for SC and UK. Intra-day RSDs (n=4 graphs) for the slopes of the calibration graphs were 4.86% for SC and 3.50% for UK. Inter-day RSDs for the slopes were 4.37% for SC and 5.39% for UK. Detection limits (S/N=3) were about 17 ng/ml for both compounds in human serum. A 1-ml volume of blood serum was necessary to do this determination.     

Determination of rupatadine in pharmaceutical formulations by a validated stability-indicating MEKC method

A stability-indicating MEKC was developed and validated for the analysis of rupatadine in tablet dosage forms, using nimesulide as internal standard. The MEKC method was performed on a fused-silica capillary (50 microm id; effective length, 40 cm). The BGE consisted of 15 mM borate buffer and 25 mM anionic detergent SDS solution at pH 10. The capillary temperature was maintained at 35 degrees C and the applied voltage was 25 kV. The injection was performed using the hydrodynamic mode at 50 mbar for 5 s, with detection by photodiode array detector set at 205 nm. The method was linear in the range of 0.5-150 microg/mL (r2=0.9996). The specificity and stability-indicating capability of the method were proven through degradation studies inclusive by MS, and showing also that there was no interference of the excipients and no increase of the cytotoxicity. The accuracy was 99.98% with bias lower than 1.06%. The LOD and LOQ were 0.1 and 0.5 microg/mL, respectively. The proposed method was successfully applied for the quantitative analysis of rupatadine in pharmaceutical formulations, and the results were compared to a validated RP-LC method, showing non-significant difference (p>0.05).     

Micellar electrokinetic chromatography for the analysis of D-amygdalin and its epimer in apricot kernel

We have developed a simple, rapid and reproducible method for the determination of D-amygdalin and its epimer by using micellar electrokinetic chromatography (MEKC). Separation of D-amygdalin was performed in a 20 mM sodium borate buffer (pH 8.5) containing 300 mM sodium dodecyl sulfate using a bare fused-silica capillary. The eluates were monitored by the absorbance at 210 nm. The applied electric field was 278 V/cm, and the time needed for the separation of D-amygdalin did not exceed 6 min. The calibration curve for D-amygdalin showed excellent linearity in the concentration range of 5-500 microg/ml. The migration time and the corrected peak area show relative standard deviations (n=6) of 0.86% and 1.48%, respectively. The limit of detection (S/N=3) for D-amygdalin was 2 microg/ml. Under acidic and neutral conditions, amygdalin exists only as the D-form; however, under basic conditions, it shows both the D- and L-forms with a concentration ratio of 1:1.3 (D-amygdalin/L-amygdalin). Results of HPLC, UV-Vis spectrophotometry, and mass spectrometry reconfirmed the identification of D-amygdalin and its epimer. The number of theoretical plates of D-amygdalin is about 100,000 in MEKC, which is significantly higher than approximately 8,000 of HPLC. This method has been successfully applied to the determination of amygdalin epimers in various apricot kernel extracts and pharmaceutical products.     

大体积进样-乙腈盐堆积-胶束扫集毛细管电动色谱法对马来酸氯苯那敏的测定

建立了大体积进样-乙腈盐堆积-胶束扫集毛细管电动色谱法测定马来酸氯苯那敏片中马来酸氯苯那敏的新方法,并考察了样品中乙腈和NaCl浓度对分离效果的影响.结果表明,以12 mmol/L四硼酸钠-50 mmol/L硼酸- 50 mmol/L十二烷基硫酸钠(SDS)为缓冲液(含10%甲醇,pH9.1),以70%乙腈- 200m...     

Analysis of organic components of smokeless gunpowders: high-performance liquid chromatogaphy vs. micellar electrokinetic capillary chromatography

The aim of the present study was to verify the analytical performances of high-performance liquid chromatography (HPLC) and micellar electrokinetic capillary chromatography (MEKC) for the separation and qualitative determination of a selected group of organic components of smokeless gunpowders. The HPLC method was based on a gradient reversed-phase elution with a mobile phase composed of 0.17 M H(3)PO(4)/methanol; detection was performed by UV absorption at the wavelengths of 220, 254, and 270 nm. The MEKC experiments were carried out by using uncoated fused-silica capillaries (50 microm inside diameter, 50 cm effective length) and a running buffer composed of 10 mM sodium tetraborate at pH 9.24 added with 25 mM sodium dodecyl sulfate (SDS); the applied voltage was 25 kV; detection was either at a fixed wavelength UV of 214 nm or with a diode-array detector operating in the wavelength range from 190 to 350 nm. Both reversed-phase HPLC and MEKC techniques succeeded in resolving the tested standard mixtures of organic components of smokeless powders. Although the sequence of elution of the different analytes was slightly different between HPLC and MEKC, a statistical analysis based on the Spearman's rank correlation test showed that the two separation patterns were highly correlated. HPLC and MEKC were comparable in terms of elution/migration time precision, whereas MEKC showed higher reproducibility of peak areas. The interfacing of capillary electrophoresis with diode array UV detection provided distinct UV spectra of the individual analytes, thus improving, on the detection side, the analytical selectivity and identification power of capillary electrophoresis.     

Micellar electrokinetic capillary chromatographic method for the separation and quantitation of multiple amino acids as naphthoxy derivatives in pharmaceutical formulations

The MEKC method is described for the quantitative analysis of 17 amino acids (AA) in pharmaceutical products. The method is based on simply derivatizing the AA with (2-naphthoxy)acetyl chloride under mild conditions. The resulting derivatives were separated by MEKC with borate buffer (35 mM; pH 9.50) including 150 mM SDS at the applied voltage of 25 kV in an uncoated capillary (effective length, 40 cm) and monitored by UV at 230 nm. The detection limits of the amino acid derivatives were in the range of 3.0-8.0 microM (S/N = 3, injection 5.0 s, 6 895 Pa). The precision (RSD) and accuracy (relative error) of the method for intra- and interday analyses of the analytes are all below 5.2%. The amino acid derivatives are stable at room temperature for 33 h studied and the molar absorptivity of the alanine derivative (used as a model) is stable over a wide pH range of 3.00-12.00. This is favorable for monitoring the derivatives in various pH by CE or LC. Application of the method to the analysis of multiple AA in a liquid injection formulation proved satisfactory.     

Determination of Clobazam, Clorazepate, Flurazepam and Flunitrazepam in pharmaceutical preparations

The separation of four benzodiazepines (Flurazepam, Flunitrazepam, Clobazam and Clorazepate) in pharmaceutical products by micellar electrokinetic chromatography (MEKC) is described. It was carried out at 25 degrees C and 25 kV by using a 57 cm (50 cm to the detector)x75 mum i.d. fused silica capillary and a 15 mM borate buffer (pH 9.2), 35 mM sodium dodecylsulfate (SDS) and 35 mM sodium deoxycholate water solution. Under these conditions, the analysis was performed in 8 min with acceptable limits of quantification (between 3 and 5 mg l(-1)). The method has been applied for quantifying these benzodiazepines in serum and different commercial formulations with recoveries near 100%.     

Development and validation of a stability-indicating micellar electrokinetic chromatography method for the determination of ezetimibe in pharmaceutical formulations.

A micellar electrokinetic chromatography (MEKC) method was validated for the analysis of ezetimibe. The method was carried out on a fused-silica capillary (50 microm i.d.; effective length, 40 cm). The background electrolyte consisted of a 25 mM borate buffer and 25 mM anionic detergent SDS (pH 9.75)/methanol (90:10, v/v). The capillary temperature was maintained at 35 degrees C, the applied voltage was 30 kV; the injection was performed using a pressure mode at 50 mbar for 5 s, with detection at 232 nm. The method was linear in the range of 2-150 microg/mL (R2=0.9999). The specificity and the stability-indicating capability were proven through degradation studies, which also showed that there was no interference of the excipients. The limits of quantitation and detection were 2 and 0.41 microg/mL, respectively. The method was applied for the analysis of ezetimibe pharmaceutical formulations, and the results were compared to those of the liquid-chromatography method.     

Comparison of electrospray ionization and atmospheric pressure photoionization for coupling of micellar electrokinetic chromatography with ion trap mass spectrometry

The performance of dopant-assisted atmospheric pressure photoionization (DA-APPI) and electrospray ionization (ESI) for the coupling of micellar electrokinetic chromatography (MEKC) with ion trap mass spectrometry (ITMS) was compared using a set of test drugs comprising basic amines, steroids, esters, phenones and a quaternary ammonium compound. The influence of the surfactant sodium dodecyl sulfate (SDS) on analyte signals was studied by infusion of sample through the CE capillary into the respective ion sources. It was found that background electrolytes (BGEs) containing 20-50mM SDS in 10mM sodium phosphate (pH 7.5) caused major ionization suppression for both polar and apolar compounds in ESI-MS, whereas APPI-MS signal intensities remained largely unaffected. ESI gave rise to the formation of SDS clusters, which occasionally may cause space-charge effects in the ion trap. Furthermore, extensive sodium-adduct formation was observed for medium polar compounds with ESI-MS, whereas these compounds were detected as their protonated molecules with APPI-MS. Using the BGE containing 20mM SDS, MEKC-ESI-MS still provides slightly lower limits of detection (LODs) (2.6-3.1muM) than MEKC-APPI-MS (4.3-6.4muM) for basic amines. For less polar compounds, highest S/Ns were obtained with APPI-MS detection (LODs, 4.5-71muM). For BGEs containing 50mM SDS, the limits of detection for MEKC-APPI-MS were more favorable (factor 1.5-12) than MEKC-ESI-MS for nearly all tested drugs. Spray shield contamination by SDS was lower in DA-APPI-MS than in ESI-MS. It is concluded that DA-APPI shows the most favorable characteristics for MEKC-MS, especially when compounds of low polarity have to be analyzed.     

Determination of Diazepam and associated compounds in pharmaceutical preparations

A method for determining Diazepam and its associated compounds in pharmaceutical products by micellar electrokinetic chromatography (MEKC) is described. The separation was carried out at 30 °C and 25 kV, using a 25 mM borate buffer (pH 9.6) and 35 mM sodium dodecylsulfate (SDS) water solution. Under these conditions the analysis was carried out within 12 min with acceptable limits of detection and quantification. The method has been applied for quantifying Diazepam in different commercial formulations when it is the active drug and when it is employed associated with other drugs (Nortriptyline, Pyridoxine hydrochloride and Sulpiride). Received: 30 October 1998 / Revised: 1 February 1999 / Accepted: 3 February 1999     

Analysis of acetylcholine and choline in microdialysis samples by liquid chromatography/tandem mass spectrometry

A sensitive liquid chromatography/electrospray ionisation tandem mass spectrometric (LC/ESI-MS/MS) method was developed for the analysis of acetylcholine and choline in microdialysis samples. A Ringer's solution that contains high (150 mM) concentrations of inorganic salts was used to extract acetylcholine and choline from a rat or mouse brain. The separation of acetylcholine, choline, an internal standard acetyl-beta-methylcholine, endogenous compounds and inorganic cations was achieved with hydrophilic interaction chromatography using a diol column. The eluent consisted of 20 mM ammonium formate (pH 3.3) and acetonitrile (20:80) which is favourable for the ESI process. Limits of detection (signal-to-noise (S/N) ratio = 3) of 0.02 nM (0.2 fmol) for acetylcholine and 1 nM (10 fmol) for choline were observed using standards diluted in Ringer's solution. A good linearity was obtained from the limit of quantitation: 0.1 nM (S/N ratio = 10) to 50 nM (r = 0.999) for acetylcholine and within the concentration range of 100-3500 nM (r = 0.998) for choline. The between-day repeatability of the method was good; RSD was 3.1% at 1 nM level of acetylcholine and 3.5% at 1000 nM level of choline. The recoveries for addition of 1 or 2.5 nM acetylcholine and 0.2 or 1 microM choline in microdialysis balancing samples were between 93 and 101% indicating that no suppressing endogenous compounds were co-eluting with acetylcholine or choline. The developed method was applied to the analysis of microdialysis balancing samples collected from rat and mouse brains.     

Analysis of ecdysteroids by micellar electrokinetic chromatography with on-line preconcentration

In order to enhance the UV detection sensitivity, an application study of an on-line preconcentration technique for micellar electrokinetic chromatographic (MEKC) was carried out. The simultaneous determination of four test ecdysteroids, 20-hydroxyecdysone, ajugasterone C, polypodine B and ponasterone A has been investigated by using the normal stacking mode in MEKC with UV detection. The effects of anionic surfactant composition and concentration, the applied voltage, the pH buffer, the kind and the amount of organic solvent and the injection time on the analyte resolution were evaluated. The optimised conditions for the separation involved the use of a 50 mM borate as the running buffer containing 50 mM of a mixture of sodium dodecyl sulphate (SDS) and sodium cholate (SC) in the ratio of 1:1 together with a concentration of 10% (v/v) of 2-PrOH at pH 9.0. Hydrodynamic injection of 12 s at 50 mbar and separation voltage of 20 kV at temperature of 20 degrees C were employed. These conditions allowed a repeatability separation within 21 min. Concentration detection limit for the neutral analytes studied improve about an order of magnitude. The method was also applied to the determination of ecdysteroids in a real sample.     

Application of MEKC and monolithic CEC for the analysis of bioactive naphthoquinones in Eleutherine americana

Two microscale separation techniques for the analysis of bioactive naphthoquinones in Eleutherine americana were developed and validated. By MEKC four compounds (eleuthoside B, isoeleutherin, eleutherol and eleutherinoside A) could be determined in plant extracts using an aqueous electrolyte solution composed of 25 mM sodium tetraborate, 50 mM sodium cholate and 20% THF. CEC on a polymeric methacrylate‐based monolith with strong cationic properties showed promising results, as it additionally enabled the separation of two enantiomers, eleutherin and isoeleutherin. The mobile phase for CEC experiments comprised 3 mM ammonium formate in a mixture of ACN and water. At an applied voltage of ?25 kV, all five markers were baseline separated in less than 12 min. Both methods were successfully validated for linearity (MEKC: R²≥0.999; CEC: R²≥0.997), sensitivity (MEKC: LOD=4–5 μg/mL; CEC: LOD=2–8 μg/mL), accuracy (MEKC: 96.5–102.7% recovery; CEC: 97.1–103.5% recovery) and precision (MEKC: σ_rel≤2.43%; CEC: σ_rel≤2.21%). The quantitative analysis of naphthoquinone derivatives in several E. americana samples showed that both methods are suitable for practical applications, because the results were well comparable to those obtained by established techniques such as HPLC.     

Determination of Diazepam and associated compounds in pharmaceutical preparations

A method for determining Diazepam and its associated compounds in pharmaceutical products by micellar electrokinetic chromatography (MEKC) is described. The separation was carried out at 30?°C and 25 kV, using a 25 mM borate buffer (pH 9.6) and 35 mM sodium dodecylsulfate (SDS) water solution. Under these conditions the analysis was carried out within 12 min with acceptable limits of detection and quantification. The method has been applied for quantifying Diazepam in different commercial formulations when it is the active drug and when it is employed associated with other drugs (Nortriptyline, Pyridoxine hydrochloride and Sulpiride).     

Analysis of green tea extract dietary supplements by micellar electrokinetic chromatography

Dietary supplements are growing in popularity as a source of catechins such as epigallocatechin gallate (EGCG). The first determination of five catechins in green tea extract dietary supplements using an extraction followed by micellar electrokinetic chromatography (MEKC) with UV detection is presented here. The optimum run buffer is 5 mM borate-60 mM phosphate with 50 mM SDS at pH 7.00 with detection at 210 nm. The limit of detection is 2-3 microg/mL (S/N=3) and the limit of quantitation is 6-8 microg/mL (S/N = 10). Results indicate that the amount of catechins varies greatly among manufacturers, between capsules of the same manufacturers, and between batches.     

Direct and sensitive analysis of methamphetamine, ketamine, morphine and codeine in human urine by cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography

Cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography (CSEI-Sweep-MEKC) was directly used to test some abuse drugs in human urine, including morphine (M), codeine (C), ketamine (K) and methamphetamine (MA). First, phosphate buffer (50 mM, pH 2.5) containing 30% methanol was filled into uncoated fused silica capillary (40 cm, 50 microm I.D.), then high conductivity buffer (100 mM phosphate, 6.9 kPa for 99.9 s) was followed. Electrokinetic injection (10 kV, 500 s) was used to load samples and to enhance sensitivity. The stacking step and separation were performed at -20 kV and 200 nm using phosphate buffer (25 mM, pH 2.5) containing 20% methanol and 100 mM sodium dodecyl sulfate. Using CSEI-Sweep-MEKC, the analytes could be simultaneously analyzed and have a detection limit down to ppb level. It was unnecessary to have sample pretreatments. During method validation, calibration plots were linear (r>or=0.9982) over a range of 150-3,000 ng/mL for M and C, 250-5,000 n g/mL for MA, and 50-1,000 ng/mL for K. The limits of detection were 15 ng/mL for M and C, and 5 ng/mL for MA and K (S/N=3, sampling 500 s at 10 kV). Comparing with capillary zone electrophoresis, the results indicated that this stacking method could increase 6,000-fold sensitivity for analysis of MA. Our method was applied for analysis of 28 real urine samples. The results showed good coincidence with immunoassay and GC-MS. This method was feasible for application to detect trace levels of abused drugs in forensic analysis.     

Determination of diclofenac sodium by capillary zone electrophoresis with electrochemical detection

Capillary zone electrophoresis was employed for the determination of diclofenac sodium using an end-column amperometric detection with a carbon fiber microelectrode, at a constant potential of 0.83 V vs. saturated calomel electrode. The optimum conditions of separation and detection are 4.90 x 10(-3) mol/l Na2HPO4-3.10 x 10(-3) mol/l NaH2PO4 (pH 7.0) for the buffer solution, 10 kV for the separation voltage, 5 kV and 10 s for the injection voltage and the injection time, respectively. The limit of detection is 2.5 x 10(-6) mol/l or 5.2 fmol (S/N=2). The relative standard deviation is 0.8% for the migration time and 4.7% for the electrophoretic peak current. The method was applied to the determination of diclofenac sodium in human urine.     

Rapid determination of acyclovir in plasma and cerebrospinal fluid by micellar electrokinetic chromatography with direct sample injection and its clinical application

A simple MEKC with UV detection at 254 nm for analysis of acyclovir in plasma and in cerebrospinal fluid (CSF) by direct injection without any sample pretreatment is described. The separation of acyclovir from biological matrix was performed at 25 degrees C using a BGE consisting of Tris buffer with SDS as the electrolyte solution. Several parameters affecting the separation of the drug from biological matrix were studied, including the pH and concentrations of the Tris buffer and SDS. Using dyphylline as an internal standard, the linear ranges of the method for the determination of acyclovir in plasma and in CSF all exceeded the range of 2-50 microg/mL; the detection limit of the drug in plasma and in CSF (S/N = 3; injection 3.45 kPa, 5 s) was 1.0 microg/mL. The applicability of the proposed method for determination of acyclovir in plasma and CSF collected at 8 h after intravenous administration of 500 mg acyclovir (Zovirax) in two patients with herpes simplex encephalitis was demonstrated.     

Analysis of bacitracin by micellar electrokinetic capillary chromatography with mixed micelle in acidic solution

A method used for quantitative analysis of bacitracin with micellar electrokinetic capillary chromatography (MEKC) is described. As capillary zone electrophoresis gave poor separation selectivity, MEKC was preferable. It was found that a zwitterionic surfactant, 3-(N,N-dimethylhexadecylammonium)-propanesulfonate (PAPS) gave the best selectivity among the several surfactants studied. As the analytes tend to adsorb onto the capillary wall due to their positive charge, an acidic solution composed of Tris-phosphate buffer at pH 2.5 was necessary to diminish such adsorption. The peak tailing caused by relatively strong ion pair interaction between the analyte and PAPS micelle could be reduced by adding nonionic surfactant Brij 35 to the PAPS solution. This phenomenon is possibly explained by a mixed micelle mechanism. In order to obtain the optimal conditions and to test the method robustness, a central composite experimental design was performed. The optimal conditions are as follows: 44 cm length of fused-silica capillary with 50 microm inner diameter, 90 mM Tris-phosphate buffer (pH 2.5) containing 17 mM PAPS and 0.3% w/v-Brij 35, 18 kV applied voltage, UV detection at 192 nm and 25 degrees C column temperature. Under the optimal conditions, more than 50 peaks could be obtained in 30 min. The method had a linearity range from 1 to 0.05 mg/mL (concentration of bacitracin A). The limit of quantitation (LOQ) and limit of detection (LOD) were 0.005 and 0.0012 mg/mL, respectively.