An evaluation of the capability of a biolayer interferometry biosensor to detect low-molecular-weight food contaminants

The safety of our food is an essential requirement of society. One well-recognised threat is that of chemical contamination of our food, where low-molecular-weight compounds such as biotoxins, drug residues and pesticides are present. Low-cost, rapid screening procedures are sought to discriminate the suspect samples from the population, thus selecting only these to be forwarded for confirmatory analysis. Many biosensor assays have been developed as screening tools in food contaminant analysis, but these tend to be electrochemical, fluorescence or surface plasmon resonance based. An alternative approach is the use of biolayer interferometry, which has become established in drug discovery and life science studies but is only now emerging as a potential tool in the analysis of food contaminants. A biolayer interferometry biosensor was assessed using domoic acid as a model compound. Instrument repeatability was tested by simultaneously producing six calibration curves showing replicate repeatability (n?=?2) ranging from 0.1 to 6.5 % CV with individual concentration measurements (n?=?12) ranging from 4.3 to 9.3 % CV, giving a calibration curve midpoint of 7.5 ng/ml (2.3 % CV (n?=?6)). Reproducibility was assessed by producing three calibration curves on different days, giving a midpoint of 7.5 ng/ml (3.4 %CV (n?=?3)). It was further shown, using assay development techniques, that the calibration curve midpoint could be adjusted from 10.4 to 1.9 ng/ml by varying assay parameters before the simultaneous construction of three calibration curves in matrix and buffer. Sensitivity of the assay compared favourably with previously published biosensor data for domoic acid.     

Biosensor immunoassay of ivermectin in bovine milk

A rapid and sensitive biosensor immunoassay was developed for determination of ivermectin residues in bovine milk. A detection limit of 16.2 ng/mL was achieved. A Biacore optical biosensor based on surface plasmon resonance was used, and a range of extraction techniques was investigated. In the final assay procedure, ivermectin was extracted with acetonitrile followed by C8 solid-phase extraction cleanup. It was proven experimentally that 2 methods of milk storage, freezing or addition of mercury-containing compounds as preservatives, could be used without considerable change in detected concentrations (samples were fortified with ivermectin after storage). The average values for milk samples spiked at 100 and 50 ng/mL concentrations were 102.6 and 51.5 ng/mL, respectively. Extraction and analysis of 20 milk samples were performed within a single working day.     

Determination of clenbuterol residues in bovine urine by optical immunobiosensor assay

Clenbuterol (CBL) is an orally active beta2-adrenoceptor agonist which has been used in veterinary medicine as a broncodilator and an agent of uterine relaxation. It has however become better known as a drug used illegally to promote growth in farm animals. A rapid and sensitive biosensor assay was developed to detect CBL residues in bovine urine. The method involved a simple extraction procedure using tert-butyl methyl ether followed by analysis on the biosensor with results obtained against a buffer calibration curve. The assay allowed up to 88 samples to be analyzed per working day, with each cycle on the biosensor taking approximately 7 min to complete. The limit of detection (LOD) was determined as 0.27 ng/mL using 20 EU reference blank urine samples. The intra-assay Sr ranged from 4.7-7.6% for 3 control samples while the interassay Sr ranged from 9.2-12.7%. The recovery was found to be approximately 95%. A series of incurred urine samples were assayed and the results compared by Enzyme immunoassay (EIA), radio-immunoassay (RIA), and gas chromatography/mass spectrometry (GC/MS) analysis. Urine samples taken from local abattoirs were also analyzed by the biosensor method and by EIA analysis. The antibody used in the biosensor test exhibited high cross reactivity with at least 7 other beta-agonists allowing detection of these compounds at less than 1 ng/mL in bovine urine.     

Imaging Array SPR Biosensor Immunoassays for Sulfamethoxazole and Sulfamethazine

A homemade array surface plasmon resonance (SPR)-based imaging biosensor was used to develop sensitive and fast immunoassays to determine sulfamethoxazole (SMOZ) and sulfamethazine (SMT) in buffer. Two conjugations of sulfonamide-bovine serum albumin (BSA) were separately immobilized on two different rows of the array chip with one row as reference. The immobilization was carried out in the instrument to monitor the quantity of the conjugations immobilized. The antibody mixed with the sulfonamide in the buffer was injected over the surface of the chip to get a relative response which was inversely proportional to the concentration of the sulfonamide in the PBS buffer. Two calibration curves were constructed and the limit of detection for sufamethoxazole in buffer was 3.5 ng/mL and for sulfamethazine 0.6 ng/mL. The stability and specificity of the antibody were also studied. The monoclonal antibody did not bind with BSA.     

Determination of egg proteins in food products by enzyme immunoassay

An enzyme-linked immunosorbent assay (ELISA) was developed to determine the presence of egg proteins in foods. The polyclonal antibodies developed were specific to whole egg proteins and did not cross-react with any of the 38 nuts, legumes, or other common food ingredients tested. The concentrations of egg proteins that will inhibit 50% of antibody-antigen binding, IC50, were 3-7 ng/mL, and the linear range was 0.5-62.5 ng/mL. The detection limit was 0.2 ppm for various foods. Recoveries ranged from 67 to 96%. The intra- and inter-assay coefficients of variation in this procedure were 10-13% for ice cream spiked at 0.8 and 1.6 ppm. The ELISA has been applied to ice creams, noodles, pasta, and breads. Egg proteins were identified in all declared egg products, and no false positives were found.     

Determination of pantothenic acid in foods by optical biosensor immunoassay

An optical biosensor inhibition immunoassay was developed using a specific pantothenic acid-binding protein for the quantitation of free pantothenic acid (vitamin B5) in foodstuffs. Samples were prepared by a simple extraction procedure in buffer, and vitamin content was estimated against authentic calibrants in the same buffer. Performance parameters included a working range of 10-5000 ng/mL, a limit of detection of 4.4 ng/mL, precision relative standard deviation of 5.4-7.1% over a range of concentrations, and recoveries > 95% in the matrixes tested. A wide range of foodstuffs, including National Institute of Standards and Technology reference samples, were tested in 3 independent laboratories and the results were compared with microbiological assay and liquid chromatography/mass spectrometry (LC/MS) methods. The results indicate that the biosensor technique is appropriate for the estimation of pantothenic acid in a wide range of foodstuffs.     

DNA electrochemical biosensors

Disposable electrochemical DNA-based biosensors are reviewed; they have been used for the determination of low-molecular weight compounds with affinity for nucleic acids and for the detection of the hybridisation reaction. The first application is related to the molecular interaction between surface-linked DNA and the target pollutants or drugs, in order to develop a simple device for rapid screening of toxic or similar compounds. The determination of such compounds was measured by their effect on the oxidation signal of the guanine peak of calf thymus DNA immobilised on the electrode surface and investigated by chronopotentiometric analysis. The DNA biosensor is able to detect known intercalating compounds, such as daunomycin, polychlorinated biphenyls (PCBs), aflatoxin B1, and aromatic amines. Applicability to river and waste water samples is also demonstrated. Disposable electrochemical sensors for the detection of a specific sequence of DNA were realised by immobilising synthetic single-stranded oligonucleotides onto a graphite screen-printed electrode. The probes became hybridised with different concentrations of complementary sequences present in the sample. The hybrids formed on the electrode surface were evaluated by chronopotentiometric analysis using daunomycin as indicator of the hybridisation reaction. The hybridisation was also performed using real samples. Application to apolipoprotein E (ApoE) is described, in this case samples have to be amplified by PCR and then analysed by DNA biosensor. The extension of such procedures to samples of environmental interest or to contamination of food is discussed.     

Surface plasmon resonance biosensor for determination of tetrodotoxin: prevalidation study

A label-free surface plasmon resonance biosensor method was applied to determine tetrodotoxin (TTX) in pufferfish matrixes using an antibody inhibition assay format. A prevalidation study was conducted to demonstrate the assay performance characteristics, such as selectivity, LOD, LOQ, repeatability, reproducibility, and accuracy. Three participating laboratories reported standard curves in buffer and pufferfish matrix. A set of blind samples with TTX spiked into buffer as well as in 10% pufferfish extract were analyzed. Additionally, three blind naturally contaminated samples were analyzed, and the results were compared to those obtained using a reference method (HPLC/electrospray ionization-selected reaction monitoring-MS). The developed method was demonstrated to be capable of detecting TTX in pufferfish matrix standard samples in a broad concentration range (2-9000 ng/mL) with an LOD of 1.5 ng/mL. Between-laboratory recovery values were in the range of 51-190% with a mean of 107%, and 64-180% with a mean of 103% for TTX-spiked samples in buffer and pufferfish matrix, respectively. Between-laboratory recoveries were in the satisfactory range of 101-119% for naturally contaminated samples. This robust, rapid, and noninvasive method may serve as an attractive alternative to established methods for detection of TTX in pufferfish extracts.     

Detection of endotoxin using an evanescent wave fiber-optic biosensor

The lipopolysaccharide endotoxin is the most powerful immune stimulant known and a causative agent in the clinical syndrome known as sepsis. Sepsis is responsible for more than 100,000 deaths annually, in large part due to the lack of a rapid, reliable, and sensitive diagnostic technique. This study describes the detection of LPS fromE. coli at concentrations as low as 10 ng/mL, in 30 s using an evanescent wave fiber-optic biosensor. Polymyxin B, covalently immobilized onto the surface of the fiber-optic probe, selectively bound fluorescently labeled LPS. Unlabeled LPS was detected in a competitive assay format using labeled LPS for signal generation. The competitive assay format worked in both buffer and plasma with similar sensitivities. This method can be used with other LPS capture molecules such as antibodies, lectins, or antibiotics, to simultaneously detect LPS and to determine the LPS serotype. The LPS assay using the fiber-optic biosensor is applicable to both clinical and environmental testing.     

Food allergen detection with biosensor immunoassays

An optical biosensor was used to develop both direct and sandwich immunoassays for the detection of proteins from milk, egg, hazelnut, peanut, shellfish, and sesame in food samples. Affinity-purified polyclonal antibodies raised against the proteins were immobilized on the biosensor chip. Food samples were injected and the proteins that bound to the antibodies on the surface were detected by a shift in the resonance angle. By adding a second antibody in a sandwich assay, matrix effects could be overcome and the sensitivity and selectivity enhanced. Detection of allergen levels down to 1-12.5 microg/g in food samples was demonstrated for the various assays. Good agreement of results was also obtained from parallel analysis with alternative immunoassays, including rocket immunoelectrophoresis, enzyme immunoassay, and immunoblotting. The present study demonstrates that the sensitivity of the described biosensor technique is comparable to the most sensitive enzymed-linked immunosorbent assays.     

Biosensors for the analysis of food- and waterborne pathogens and their toxins

Biosensors are devices which combine a biochemical recognition element with a physical transducer. There are various types of biosensors, including electrochemical, acoustical, and optical sensors. Biosensors are used for medical applications and for environmental testing. Although biosensors are not commonly used for food microbial analysis, they have great potential for the detection of microbial pathogens and their toxins in food. They enable fast or real-time detection, portability, and multipathogen detection for both field and laboratory analysis. Several applications have been developed for microbial analysis of food pathogens, including E. coli O157:H7, Staphylococcus aureus, Salmonella, and Listeria monocytogenes, as well as various microbial toxins such as staphylococcal enterotoxins and mycotoxins. Biosensors have several potential advantages over other methods of analysis, including sensitivity in the range of ng/mL for microbial toxins and <100 colony-forming units/mL for bacteria. Fast or real-time detection can provide almost immediate interactive information about the sample tested, enabling users to take corrective measures before consumption or further contamination can occur. Miniaturization of biosensors enables biosensor integration into various food production equipment and machinery. Potential uses of biosensors for food microbiology include online process microbial monitoring to provide real-time information in food production and analysis of microbial pathogens and their toxins in finished food. Biosensors can also be integrated into Hazard Analysis and Critical Control Point programs, enabling critical microbial analysis of the entire food manufacturing process. In this review, the main biosensor approaches, technologies, instrumentation, and applications for food microbial analysis are described.     

A microfluidic biosensor for rapid detection of Salmonella typhimurium based on magnetic separation,enzymatic catalysis and electrochemical impedance analysis

Rapid screening of foodborne pathogens is of great significance to ensure food safety.A microfluidic biosensor based on immunomagnetic separation,enzyme catalysis and electrochemical impedance analysis was developed for rapid and sensitive detection of S.typhimurium.First,the bacterial sample,the magnetic nanoparticles （MNPs） modified with capture antibodies,and the enzymatic probes modified with detection antibodies and glucose oxidase （GOx） were simultaneously injected into the microfluidic ch...     

CuO/Cu2O nanowire array photoelectrochemical biosensor for ultrasensitive detection of tyrosinase

Photoelectrochemical(PEC) biosensors have shown great promise in bioanalysis and diagnostic applications in recent years. In this work, the CuO/Cu_2O nanowire array(CuO/Cu_2O Nanowire) supported on copper foam was prepared as a photocathode for detection of tyrosinase though quinone-chitosan conjugation chemistry method. The in-situ generated quinones that were the catalytic product of tyrosinase acted as electron acceptors, which were captured by the chitosan deposited on the surface of the electrode. Direct immobilization of electron acceptor on the electrode surface improved the photocurrent conversion efficiency and thus sensitivity. The as-prepared biosensor can realize a rapid response in a wide linear range of 0.05 U/mL to 10 U/mL with the detection limit as low as 0.016 U/mL of tyrosinase. The current work provides a new perspective to design and develop highly sensitive and selective PEC biosensor.     

Detection of ricin in food using electrochemiluminescence-based technology

Ricin is a toxic ribosome inactivating protein (RIP-II) present in beans of the castor plant, Ricinus communis. Its potential as a biodefense threat has made the rapid, sensitive detection of ricin in food important to the U.S. Food and Drug Administration. Samples of juice, dairy products, soda, vegetables, bakery products, chocolate, and condiments were spiked with varying concentrations of ricin and analyzed using a 96-well format, electrochemiluminescence (ECL) immunoassay. Assay configurations included the use of a monoclonal capture antibody coupled with either a polyclonal or monoclonal detector antibody. The samples and detector antibodies were either added sequentially or in combination during the capture step. Using the polyclonal antibody, 0.04 ng/mL ricin was detected in analytical samples prepared from several beverages. By simultaneously incubating the sample with detector antibody, it was possible to decrease the assay time to a single 20 min incubation step with a limit of detection <10 ng/mL. Assays run according to this single incubation step exhibited a hook effect (decrease in signal at high concentrations of ricin), but because of the large signal-to-noise ratio associated with the ECL assay, the response remained above background and detectable. Thus, the ECL assay was uniquely suited for the screening of samples for ricin.     

高灵敏甲胎蛋白夹心免疫传感器的制备

构建了新型甲胎蛋白(AFP)夹心免疫传感器.采用金纳米粒子-氧化石墨烯-普鲁士蓝纳米立方体(AuNP-GO-PBNCs)纳米复合材料标记甲胎蛋白(AFP)二抗,将制备的金-聚多巴胺-四氧化三铁(Au-PDA-Fe3O4)磁性纳米复合物固定在自制的磁性电极表面,通过吸附作用固定AFP一抗,用牛血清白蛋白(BSA)封闭电极上的非特异性吸附位点.在37℃下与AFP抗原溶液孵育50 min,最后将电极放入AuNP-GO-PBNCs纳米复合材料标记的二抗溶液中孵育,基于此建立了采用普鲁士蓝(PB)标记的的夹心免疫传感器检测AFP的方法.在最佳实验条件下,PB催化H2O2氧化的响应电流与AFP的浓度表现出两段线性关系,线性范围分别为0.005~1.000 ng/mL和1~20 ng/mL, 检出限(LOD, S/N=3)为1.0 pg/mL.本方法具有灵敏度高、选择性好的特点.     

Development of polypyrrole (nano)structures decorated with gold nanoparticles toward immunosensing for COVID-19 serological diagnosis

The rapid and reliable detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) seroconversion in humans is crucial for suitable infection control. In this sense, many studies have focused on increasing the sensibility, lowering the detection limits and minimizing false negative/positive results. Thus, biosensors based on nanoarchitectures of conducting polymers are promising alternatives to more traditional materials since they can hold improved surface area, higher electrical conductivity and electrochemical activity. In this work, we reported the analytical comparison of two different conducting polymers morphologies for the development of an impedimetric biosensor to monitor SARS-CoV-2 seroconversion in humans. Biosensors based on polypyrrole (PPy), synthesized in both globular and nanotubular (NT) morphology, and gold nanoparticles are reported, using a self-assembly monolayer of 3-mercaptopropionic acid and covalently linked SARS-CoV-2 Nucleocapsid protein. First, the novel hybrid materials were characterized by electron microscopy and electrochemical measurements, and the biosensor step-by-step construction was characterized by electrochemical and spectroscopic techniques. As a proof of concept, the biosensor was used for the impedimetric detection of anti-SARS-CoV-2 Nucleocapsid protein monoclonal antibodies. The results showed a linear response for different antibody concentrations, good sensibility and possibility to quantify 7.442 and 0.4 ng/mL of monoclonal antibody for PPy in the globular and NT morphology, respectively. The PPy-NTs biosensor was able to discriminate serum obtained from COVID-19 positive versus negative clinical samples and is a promising tool for COVID-19 immunodiagnostic, which can contribute to further studies concerning rapid, efficient, and reliable detections.     

基于微悬臂梁生物传感器检测三磷酸腺苷

基于适配子构建了无标记检测三磷酸腺苷(ATP)的微悬臂梁生物传感器。 将ATP适配子修饰在微悬臂梁阵列中的传感悬臂镀金面上,用来识别ATP,而参比悬臂修饰巯基己醇(MCH)防止非特异性吸附。 ATP与其适配子发生特异性相互作用,使悬臂的上下两个表面产生应力差,导致传感悬臂产生偏转,扣除参比悬臂偏转后其偏转值与ATP的浓度在0.5~5 mmol/L范围内有良好的线性关系,相关系数为0.998,最低检出限为0.06 mmol/L。 该微悬臂梁生物传感器响应快速、操作简单,并且对ATP具有良好的特异性。     

Amperometric Immunosensor Based on L-Cysteine/Gold Colloidal Nanoparticles for Carbofuran Detection

In this study, anti-carbofuran monoclonal antibodies (Ab) were immobilized onto a gold electrode surface modified with multilayers of L-cysteine and gold colloidal nanoparticles (GNPs). Furthermore, horseradish peroxidase (HRP) as enzyme membrane was used for blocking unspecific sites and amplifying signal. The conformational properties of the immunosensor were characterized using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The concentration of antibody solution, pH of working buffer and incubation time were studied in detail for optimization of analytical performance. Under optimal conditions, the variation of current response was proportional to the concentration of carbofuran which ranged from 0.01 ng/mL to 50 ng/mL with a correlation coefficient of 0.9912. The detection limit was 0.01 ng/mL (S/N = 3). The proposed immunosensor exhibited good reproducibility and stability and it can be used for the rapid detection of carbofuran pesticide.     

An immunochromatographic assay for rapid and simultaneous detection of levonorgestrel and methylprednisolone in water samples

Synthetic contraceptive levonorgestrel (LNG) and glucocorticoid methylprednisolone (MP) residues are eventually discarded to environmental water system and function as environmental hormones, displaying potential risk to humans and ecosystems, thus there is an urgent need for fast, sensitive and simultaneous detection of these compounds in water samples. In this study, a competitive immunochromatographic assay (ICA) using colloidal gold-labeled polyclonal antibodies as probes for rapid and simultaneous detection of LNG and MP in water samples was developed. The visual detection limits of LNG and MP in water samples were 10 ng/mL. The detection process could be completed within 10 min. There was no cross-reactivity of the ICA with other seven compounds. The strips could be stored at 4℃ for 10 weeks without significant loss of activity. The assay is a suitable tool for rapid and semiquantitative detection of LNG and MP in water samples on site.     

纳米金标记抗体增强SPR检测大肠杆菌O157∶H7

将金纳米粒子(AuNPs)标记的大肠杆菌O157∶H7(E.coli O157∶H7)的多克隆抗体(PAb)作为二抗,采用氨基偶联法将PAb固定在传感器表面作为一抗,通过三明治方法用双通道表面等离子体子共振(SPR)传感器对E.coli O157∶H7进行检测,并与SPR直接法检测进行了比较.结果表明,直接法的检出限为103cfu/mL,线性范围为103～109cfu/mL;AuNPs增强三明治法的检出限为10 cfu/mL,线性范围为10～1010cfu/mL,灵敏度比直接法提高了100倍,且具有更宽的检测范围.本方法不仅检测时间短,而且具有良好的选择性和重现性.