A new measurement of the weak magnetism term in the betaspectra of B and N

The betaspectra of ¹²B and ¹²N have been measured with a NaI crystal as spectrometer. Assuming a shape correction factor 1 + aW + bW² and b₋ = 1.106 × 10⁻⁴ MeV⁻², b₊ = −1.397 × 10⁻⁴ MeV⁻², the spectra yield a₋ = (+0.91 ± 0.11) × 10⁻² MeV⁻¹ and a₊ = (−0.07 ± 0.09) × 10⁻² MeV⁻. the a₋ − a₊ = (+0.98 ± 0.09) × 10⁻² MeV⁻¹ is in agreement with the weak magnetism prediction.     

Hadronic production by ee collisions at the energy 990 MeV with the Orsay storage ring

Data were taken at the energy 2E = 990 MeV to search for multibody events, with the same large solid angle detector which has been used for the measurement of the , ω andφ production by e⁺e⁻ annilations. Assuming a π⁺π⁻π⁰π⁰ production by the quasi two-body process e⁺e⁻ → → ωπ⁰ we give the correspondi ng cross section σ(e⁺e⁻ → π⁺π⁻π⁰π⁰) = (1.1 ± 0.5) 10⁻³² cm². Since no events with 3 and 4 charged pions have been observed σ(e⁺e⁻ → π⁺π⁻π⁰π⁻) 1.5 × 10⁻³³ cm².     

Escape of charged particles at stopping annihilation of antiprotons in the heavy nuclei of nuclear photoemulsion

“Rare” annihilation channels for antiprotons stopping on heavy (Ag, Br) nuclei of photoemulsion, have been sought; 4872 stops of antiprotons on photoemulsion nuclei are analysed. Events of formation and decay of the hyperfragment _Λ⁴H, escape of ⁸He and ⁸Li nuclei, one-prong stars with the mean range 79.5±5.1 μm of secondary slow “b” particles are found among the annihilation stars at capture on nuclei (Ag, Br). The lower limits for the production probability of _Λ⁴H and ⁸He, ⁸Li nuclei per antiproton stopping in the nuclei (Ag, Br) are

W_Λ⁴H2×10⁻⁴ and W_⁸He,⁸Li=(1.3±0.6)×10⁻³.

The branching ratio for the production of one-prong stars with the secondary “b” particles is at least (1.3±0.6)×10⁻³. Possible mechanisms for a production of these events in annihilation processes are considered.     

Duree de vie et depolarisation par collisions avec l''helium des niveaux 5P3/2 Et 5P1/2 de l''ion Cd

The lifetimes of the Cd⁺ 5²P_3/2 and 5²P_1/2 states have been measured by the Hanle effect. The Cd⁺ ions are produced in a d.c. discharge in cadmium vapor, with helium as buffer gas. The results are: τ(5²P_3/2) = (2.60±0.20) ×10⁻⁹sec, and τ(5²P_1/2) = (3.05 ± 0.13) × 10⁻⁹sec.

We measured also the cross sections for the destruction of the orientation in the 5²P_1/2Cd⁺ state (<5Ų), of the orientation (18±10Ų) and of the alignment (46±10Ų) in the 5²P_3/2 state due to collisions with the helium atoms.     

Conductivity anisotropy in directionally solidified CaZrO3---CaSZ and MgO-MgSZ eutectics

The results of the impedance spectroscopy measurements on eutectic samples based on zirconium oxide are presented here. Samples of CaZrO₃---ZrO₂(cubic) and MgO---ZrO₂(cubic) have been grown by a directional solidification procedure such that the different phases appear nearly oriented along the growth direction (lamellae in the system of CaZrO₃-ZrO₂(cubic) and fibers of MgO in a ZrO₂ matrix in the other system). The DC electrical conductivity has been measured by impedance spectroscopy along and across the growth axis. For CaZrO₃---ZrO₂ the coductivity is clearly anisotropic. The following values for σT have been obtained: the conductivity at 600 °C equals 2.0 × 10⁻⁶ Ω⁻¹ cm⁻¹ perpendicular to the fiber axis and 1.4 × 10⁻⁵ Ω⁻¹ cm⁻¹ parallel to it and with an activation energy of 1.3 eV for σT. For MgO---ZrO₂(cubic) the isotropic value of the conductivity at 600 °C is 10⁻⁴ Ω⁻¹ cm⁻¹ with activation energy for σT of 1.5 eV. The anisotropic conductivity in the CaZrO₃---ZrO₂ (cubic) system has been explained by a model of an ordered stacking of oxygen conducting (cubic ZrO₂) and non-conducting (CaZrO₃ or MgO) phases.     

Determination of different oxygen transport mechanisms and measurement of the oxygen ion conductivity of Y1Ba2Cu3O7−x

By undertaking AC electrochemical impedance experiments on yttria stabilised zirconia electrolytes with polished Y₁Ba₂Cu₃O_7−x electrodes, the activation energy for oxygen ion transport within the bulk of Y₁Ba₂Cu₃O_7−x, in air, over the temperature range 823 K–1043 K, was determined to be 1.50 ± 0.05 eV. At 1000 K the oxygen ionic conductivity was calculated to be around one order of magnitude lower than that in yttria stabilised zirconia. Typical calculated values were σ=5×10⁻⁵ (ω cm)⁻¹ and 6×10⁻³ (ω cm)⁻¹ at the respective temperatures 823 K and 1043 K. By employing a similar cell but with Y₁Ba₂Cu₃O_7−x paste electrodes, oxygen transfer between the Y₁Ba₂Cu₃O_7−x and the electrolyte was found to occur via a surface diffusional processes. Over the temperature range 873 K–1098 K, in air, the activation energy for in-diffusion at the surface was found to be 1.4±0.1 eV and that for out-diffusion at the surface to be 1.76±0.05 eV.     

Polarisation circulaire du rayonnement gamma de Sb, Cs et Ag

The βγ circular polarization correlation of the 3⁻(β⁻ 621 keV)3⁻(γ 1692)2⁺ cascade in ¹²⁴Sb, the 4⁺(β⁻ 662)4⁺ (γ 796)2⁺ (γ 605)0⁺ in ^13Z4Cs and the 6⁺(β⁻529)6⁺ (γ 937)4⁺ (γ 885)2⁺ (γ 658)0⁺ in ^110mAg have been studied by using a Compton effect polarimeter. The measured asymmetry parameters are 0.172±0.004, −0.0702 ±0.0024 and 0.0549±0.0013 respectively.     

Chemically deposited copper oxide thin films: structural, optical and electrical characteristics

Thin films of copper oxide with thickness ranging from 0.05–0.45 μm were deposited on microscope glass slides by successively dipping them for 20 s each in a solution of 1 M NaOH and then in a solution of copper complex. Temperature of the NaOH solution was varied from 50–90°C, while that of the copper solution was maintained at room temperature. X-ray diffraction patterns showed that the films, as prepared, are of cuprite structure with composition Cu₂O. Annealing the films in air at 350°C converts these films to CuO. This conversion is accompanied by a shift in the optical band gap from 2.1 eV (direct) to 1.75 eV (direct). The films show p-type conductivity, 5×10⁻⁴ Ω⁻¹ cm⁻¹ for a film of thickness 0.15 μm. Electrical conductivity of this film increases by a factor of 3 when illuminated with 1 kW m⁻² tungsten halogen radiation. Annealing in a nitrogen atmosphere at temperatures up to 400°C does not change the composition of the films. However, the conductivity in the dark as well as the photoconductivity of the film increases by an order of magnitude. The electrical conductivity of the CuO thin films produced by air annealing at 400°C, is high, 7×10⁻³ Ω⁻¹ cm⁻¹. These films are also photoconductive.     

Specific heat of the cubic high-Tc superconductor Ba0·6K0·4BiO3

We report magnetic susceptibility and specific heat measurements on polycrystalline samples of the 30 K superconductor Ba_0·6K_0·4BiO₃. Normal-state magnetization measurements indicate a Pauli-paramagnetic susceptibility of χ_pauli = 2.3 × 10⁻⁵ emu/mole, from which we infer a value for the density of states at the Fermi level of N(0) = 8.6 × 10 ²¹ev⁻¹cm.⁻³ Specific heat measurements performed between 1.6 K and 40 K indicate that considerable lattice softening occurs at low temperatures; the effective Debye temperature drops from 280 K at 35 K to 210 K at 4 K, implying that soft phonon modes are present in this compound. This result indicates that conventional phonon-mediated interactions may be responsible for the high transition temperature exhibited by Ba_0·6K_0·4BiO₃.     

Poly(ethylene oxide-co-epichlorohydrin)/NaI: a promising polymer electrolyte for photoelectrochemical cells

We have investigated the thermal and ionic conductivity properties of the elastomer poly(ethylene oxide-co-epichlorohydrin) filled with NaI and I₂. The reason for using this composition is its potential application as electrolyte in photoelectrochemical cells. This copolymer was characterized as a function of NaI concentration, temperature and relative humidity. According to the data obtained, the Na⁺ ion interacts with the ethylene oxide repeating units by means of Lewis type acid–base interactions. The empirical Vogel–Tamman–Fulcher equation was used to model the conductivity and temperature relationships, indicating that the conduction occurs in the amorphous phase of the copolymer. The sample with 9.0% (w/w) of NaI presents a conductivity of 1.5×10⁻⁵ S cm⁻¹ in a dry atmosphere (30°C, [H₂O]<1 ppm) and 2.0×10⁻⁴ S cm⁻¹ at 86% relative humidity (22°C).     

Diffusion of W on A W(211) plane

The diffusion of W on a (211) plane of a W field emitter has been re-examined by means of the fluctuation autocorrelation method. Diffusion along channels yielded E = 16.8 ± 0.5 kcal, D₀ = (3 ± 1) × 10⁻⁵ cm² s⁻¹. For diffusion across channels E =6.6 kcal, D₀ = 4 × 10⁻⁹cm² s⁻¹ at T < 752 K, and E = 24 kcal, D₀ = 5 × 10⁻⁴ cm² s⁻¹ at T > 752 K. The results for diffusion along channels yield E and D₀ values intermediate between recent results by Wang and Ehrlich [Surf. Sci. 206 (1988) 451] using field ion microscopy (E = 19 kcal, D₀ = 7.7 × 10⁻³ cm² s⁻¹) and Tringides and Gomer [J. Chem. Phys. 84 (1986) 4049], using the same method as the present work but a larger slit (E = 13.3 kcal, D₀ = 7 × 10⁻⁷ cm² s⁻¹). The results for cross channel diffus good agreement with those of Tringides and Gomer below 752 K, where these authors stopped. The new high temperature results suggest that the channel wall exchange mechanism postulated by Tringides and Gomer for cross channel diffusion at low T gives way to diffusion by climbing over the channel walls with higher E but also higher D₀ above 752 K. Possible reasons for the discrepancies between these three sets of results and the absence of cross channel diffusion in the work of Wang and Ehrlich are briefly discussed.     

Surface tension and density measurements for indium and uranium using a sessile-drop apparatus with glow discharge cleaning

The sessile-drop method is used to measure the surface tension and density of liquid indium and uranium under high vacuum. Measurements are made over the temperature range 156–500°C for In and at the melting point for U. Surface oxides are efficiently removed with a glow discharge system. Drop profiles are captured by photograph and processed using nonlinear regression to yield the surface tension and density. In this regression procedure, normal distances from calculated profiles to data points are minimized. For indium, the density and surface tension measurements yield _mp = 7.05 × 10³kg/m³, d/dT = −0.776 kg/m³·°C, and γ_mp = 0.568 N/m, dγ/dT = −9.45 × 10⁻⁵ N/m·°C. The results for uranium at the melting point are _mp = 17.47 × 10³ kg/m³ and γ_mp = 1.653 N/m.     

Domain wall pinning in polycrystalline perovskite La0.7Sr0.3MnO3

Reversible and irreversible domain wall (DW) motions have been investigated in La_0.7Sr_0.3MnO₃ ceramic samples using frequency-response complex permeability with various amplitudes of AC field. We also examine the effects of temperature in the range from 293 to 368 K and transverse DC magnetic field with a maximum of 4.40×10⁵ A/m on the real part of permeability (μ′). Two relaxations corresponding to reversible wall motions and domain rotations occur in low and high frequency regions, respectively. The irreversible DW displacements can be activated as the amplitude larger than the pinning field of 3 A/m, leading to an increase in μ′. The μ′ obeys a Rayleigh law at the temperature below 343 K or under DC field of less than 4.22×10⁴ A/m. The Rayleigh constant η increases from 5.45×10⁻² to 1.54×10⁻¹ (A/m)⁻¹ as the temperature rises from 293 to 343 K, and η decreases from 5.58×10⁻² to 3.67×10⁻² (A/m)⁻¹ with increasing DC field from 1.99×10³ to 4.22×10⁴ A/m.     

Symmetry breaking and the decays ψ′ → J/ψπ(η) and J/ψ → η(η′) γ

The theoretical mechanisms for the decays ψ′ → ψπ⁰ and ψ′ → ψη, which violate SU₂ and SU₃, respectively discussed. It is argued that symmetry breaking in the decay amplitudes may be as important as π⁰ −η −η′ mixing. The π⁰ −η mechanism ψ′ → ψν → ψπ⁰ leads to Γ(ψ′ → ψπ⁰) = (3.3±1.0) × 10⁻³ Γ(ψ′ → ψν), but this number may be enhanced by a factor as large as 12 by π⁰−η′ mixing and isospin violation in the decay amplitude. The related decays ψ → ηγ and ψ → η′γ are also discussed.     

Optical nonlinearities and photo-excited carrier lifetime in CdS at 532 nm

Bound-electronic and free-carrier optical nonlinearities, and relaxation of photo-excited free carriers in CdS have been investigated by the use of a single-beam Z-scan technique at 532 nm. Under pulsed radiation of 35-ps duration with the input irradiances up to 4.8 GW/cm², the two-photon absorption coefficient, the bound-electron nonlinear refractive index, the free-carrier absorption cross-section, and the change in the refractive index per unit carrier density are determined to be 5.4±0.8 cm/GW, −(5.3±0.8)×10⁻¹³ cm²/W, (3.0±0.5)×10⁻¹⁷ cm² and −(0.8±0.1)×10⁻²¹ cm³, respectively. By using these values in the open-aperture Z-scans conducted with 7-ns laser pulses, the carrier recombination time is extracted to be 3.6±0.7 ns. The measured parameters are compared to theoretical calculations.     

Experimental study of the time-dependent rate of K → πππ

The time-dependence of the decay rate of initially pure K⁰ into the final state (π⁺π⁻π⁰) has been studied in search for the decay k_S⁰→π⁺π⁻π⁰. No evidence is found in a sample of 384 observed events. The ratio of the CP -violating K_S⁰ amplitude and the K_L⁰ amplitude is η₊₋₀ = (0.13_−0.20^+0.17) + i(0.17_−0.26^+0.27); the ratio of the CP-conserving K_S⁰ amplitude and the K_L⁰ amplitude is < 0.4. The energy dependence of the K⁰→π⁺π⁻π⁰ matrix element is found to be a₊₋₀ = −0.31 ± 0.03.     

Optical pumping of the 2p3sP0 State of Ne (I = 3/2): g factor and metastability exchange cross section

A C.W. multi-mode dye laser is used to obtain by optical pumping an orientation of the 2p⁵ 3s³P₀ (F = 3/2) state of ²¹Ne. A magnetic resonance experiment leads to the measurement of the g factor g (³P₀) = 3.027 (8) × 10⁻⁴ to be compared with the theoretical prediction (3.025(6) × 10⁻⁴). One obtains also the metastability exchange cross section σ(³P₀) = 18.4 ± 4 Ų for collisions between metastable (³P₀) Ne atoms and ground state Ne atoms. This result is compared with other measurements and theoretical evaluation.     

MnO thin film cathode for rechargeable microbatteries

Thin films of MnO were deposited by electron beam evaporation using a MnO or MnO₂ source. The thin films were charaterized by X-ray and electron diffraction. The Coulomb titration curve reveals a potential plateau of 2.9 V over the composition range 0.05<x<2.0. The chemical diffusion coefficient of lithium in thin films at 15°C is 2.7×10⁻¹⁴ cm²/s for 0<x<0.01 and 2.2×10⁻¹⁵ cm²/s for 0.02<x<0.06. Good reversibility for lithium insertion and extraction is demonstrated by cyclic voltammetry.     

Electron stimulated desorption of CO from Pd1/W(110)

The electron impact behavior of CO adsorbed on Pd₁/W(110) was investigated. The desorption products observed were neutral CO, CO⁺, and O⁺. After massive electron impact residual carbon, C/W = 0.15, but not oxygen was also found, suggesting that energetic neutral O, not detected in a mass analyzer must also have been formed. Formation of β-CO, i.e., dissociated CO with C and O on the surface was not seen. The total disappearance cross section varies only slightly with coverage, ranging from 9 × 10 ⁻¹⁸ cm² at low to 5 × 10⁻¹⁸ cm² at saturation (CO/W = 0.75). The cross section for CO⁺ formation varies from 4 × 10⁻²² cm² at satura to 2 × 10⁻²¹ cm² at low coverage. That for O⁺ formation is 1.4 × 10⁻²² cm² at saturation and 2 × 10⁻²¹ cm² Threshold energies are similar to those found previously [J.C. Lin and R. Gomer, Surf. Sci. 218 (1989) 406] for CO/W(110) and CO/Cu₁/W(110) which suggests similar mechanisms for product formation, with the exception of β-CO on clean W(110). It is argued that the absence or presence of β-CO in ESD hinges on its formation or absence in thermal desorption, since electron impact is likely to present the surface with vibrationally and rotationally activated CO in all cases; β-CO formation only occurs on surfaces which can dissociate such CO. It was also found that ESD of CO led to a work function increase of the remaining Pd₁/W(110) surface of 500 meV, which could be annealed out only at 900 K. This is attributed to surface roughness, caused by recoil momentum of energetic desorbing entities.