氧化锰纳米管及其超级铝热剂:制备及对环三亚甲基三硝胺热分解的影响

采用水热法制备了MnO₂纳米管,以其与纳米铝粉为原料,采用超声分散复合的方法,制备了超级铝热剂Al/MnO₂.利用粉末X射线衍射(XRD)、扫描电子显微镜(SEM)及能量散射光谱仪(EDS)对产物的物相、组成、形貌和结构进行分析表征,并运用差示扫描量热法(DSC)研究了MnO₂纳米管及其超级铝热剂对环三亚甲基三硝胺热分解特性的影响.结果表明,水热法制备的纳米MnO₂呈管状均匀分布,球形纳米Al与管状纳米MnO₂相互依附,分散较均匀;MnO₂纳米管及其超级铝热剂的加入均改变了环三亚甲基三硝胺的热分解行为及分解历程,使原有占主导的液相分解变为二次的气相反应加剧,使环三亚甲基三硝胺主分解峰形发生了明显的改变.     

超级铝热剂Al/Fe2O3的制备、表征及对环三亚甲基三硝胺热分解的影响

采用水热法制备了中空短棒状纳米Fe2O3,并用超声分散法将其与纳米Al颗粒复合为单金属氧化基超级铝热剂.利用X射线粉末衍射(XRD)、傅里叶变换红外(FTIR)光谱、扫描电镜及能量散射光谱仪(SEM-EDS)对样品进行表征.并运用差示扫描量热法(DSC)对比研究了超级铝热剂Al/Fe2O3、Al粉和纳米Fe2O3对环三亚甲基三硝胺(RDX)热分解特性的影响.结果表明:超级铝热剂的加入改变了RDX的热分解过程,并加剧了RDX的二次气相反应;随着超级铝热剂含量的增加,RDX的分解峰峰形发生了明显的改变;Al/Fe2O3、Al粉和Fe2O3对RDX热分解的作用主要表现为二次分解峰逐渐明显且峰温降低.     

纳米Ag/CNTs复合材料的制备、表征及对环三亚甲基三硝胺热分解的影响

采用银镜法和水热法制备了两种纳米Ag/CNTs(碳纳米管)复合材料, 利用傅里叶变换红外(FTIR)光谱、粉末X射线衍射(XRD)、透射电子显微镜(TEM)、扫描电子显微镜及能量散射光谱仪(SEM-EDS)对复合物的物相、组成、形貌和结构进行分析表征, 并运用差示扫描量热法(DSC)研究了纳米Ag/CNTs 复合材料对环三亚甲基三硝胺(RDX)热分解特性的影响. 结果表明: 纳米Ag 以10-80 nm的不规则球形“粘附”于纳米CNTs 表面,分散较均匀, 水热法制得的复合物表面纳米Ag较大、且负载的Ag粒子较多; 纳米Ag/CNTs 复合材料的加入改变了RDX的热分解过程, 使原有占主导的液相分解变为二次的气相反应加剧, RDX主分解峰形发生了明显的改变; 纳米Ag/CNTs 复合材料对RDX热分解的催化主要表现为分解温度的降低.     

超级铝热剂的制备、表征及其燃烧催化作用

用纳米铝粉和纳米氧化铅、纳米氧化铜和纳米三氧化二铋为原料,采用超声分散复合的方法,制备了纳米超级铝热剂Al/PbO、Al/CuO和Al/Bi₂O₃。采用X射线粉末衍射(XRD)、扫描电镜及能谱分析(SEM-EDS)和红外光谱(IR)对原料和产物的物相、组成、形貌和结构进行分析表征;运用差示扫描量热仪(DSC)评估三种超级铝热剂与双基推进剂主要组分的相容性;研究了3种超级铝热剂对双基推进剂燃烧性能的影响。结果表明,Al/PbO、Al/CuO和Al/Bi₂O₃与推进剂主要组分硝化棉(NC)、硝化棉/硝化甘油(NC/NG)混合物和吉纳(DINA)的相容性均良好,而与黑索今(RDX)和1,3-二甲基-1,3-二苯基脲(C₂)相对较为敏感;含三种纳米超级铝热剂的双基推进剂表现出优异的燃烧性能。     

超级铝热剂Al/CuO前驱体的制备、表征、热分解机理及非等温分解反应动力学

以硝酸铜、无水乙醇、1,2-环氧丙烷和纳米铝粉为原料, 在超声振荡条件下, 采用溶胶-凝胶法制备了纳米复合含能材料——超级铝热剂Al/CuO的前驱体. 利用热重-差示扫描量热-傅里叶变换红外-质谱(TG- DSC-FTIR-MS)联用技术, 研究了纳米Al/CuO溶胶-凝胶前驱体的热行为和分解过程及机理. 利用不同升温速率下的TG-DTG分析, 研究了纳米超级铝热剂Al/CuO的溶胶-凝胶前驱体的热分解反应机理, 采用了6种动力学分析方法进行动力学参数计算, 得到前驱体分解反应的表观活化能、反应级数、频率因子等动力学参数, 纳米Al/CuO前驱体分解反应的动力学方程为: dα/dt=10^14.0×4α^3/4exp(-2.0×10⁴/T).     

纳米SnO2-CuO粉体的制备、表征及对环三次甲基三硝胺热分解的催化性能

复合纳米粒子;共沉淀法;热分解;纳米SnO2-CuO粉体的制备、表征及对环三次甲基三硝胺热分解的催化性能     

RDX分形生长及其机理研究

使环三亚甲基三硝胺(RDX)溶液在非平衡态下结晶,制备具有分形结构的RDX.通过加入不同的醇类来调节溶液的粘度,改变溶剂挥发速度,从而控制分形生长的非平衡程度及分形形貌.研究结果表明:当在RDX的丙酮溶液中加入乙二醇时,RDX的结晶形貌随溶液浓度的增加呈分形树生长;当加入乙醇时,随着浓度的增加,RDX的结晶形貌发生了从...     

超级电容器电极材料MnO_2纳米棒的制备及其电化学性能(英文)

以洋葱碳为还原剂,KMnO4为氧化剂,稀硫酸溶液为溶剂,采用水热法一步制备MnO2纳米棒.利用X射线衍射仪和透射电子显微镜分析了MnO2纳米棒的物相、结构、形貌;将MnO2纳米棒作为电极材料组装了超级电容器,采用电池测试系统测定了超级电容器的电化学性能.结果表明,所得到的产物为α-MnO2,其直径为5~10nm,长度为50~100nm;以MnO2纳米棒作为电极材料组装的超级电容器具有较高的比容量和稳定性,有望在超级电容器的研究和应用中得到推广.     

铝基阳极氧化铝模板水热法制备TiO2纳米管阵列

在(NH4)2TiF6的水溶液中,以铝基阳极氧化铝为模板,采用水热法制备了TiO2纳米管阵列. 使用场发射扫描电镜和X射线衍射对水热合成产物进行了表征. 实验结果表明,水热处理所得TiO2纳米管阵列具有特殊的形貌,其表面为连续的多孔状,断面为不连续、相互分离的管状;管口和管壁分别由平均粒度约45和25 nm的微细TiO2颗粒紧密堆积而成. 采用本方法制备的TiO2纳米管阵列无需热处理便已具有明显的锐钛矿型晶相特征.     

基于纳米MnO2-MWCNTs复合材料修饰的葡萄糖传感器

采用水热法制备了纳米MnO2,并用红外光谱,X射线衍射(XRD)和扫描电子显微镜(SEM)对其进行了表征。将碳纳米管和纳米MnO2分散在壳聚糖溶液中,用滴涂法固定到玻碳电极表面,制成修饰电极。利用计时电流法对该葡萄糖传感器的性能进行了研究,纳米MnO2-MWCNTs复合物对葡萄糖的氧化有明显的催化作用。在优化的条件下,葡萄糖在5.0×10-5～3.0×10-2mol/L浓度范围内,计时电流与浓度之间呈线性关系,检出限为1.5×10-5 mol/L(S/N=3)。对1.0×10-3 mol/L葡萄糖溶液平行测定8次的相对标准偏差(RSD)为2.1%。该传感器可成功用于葡萄糖注射液中葡萄糖的测定,回收率在96.4%～98.6%之间。     

Preparation and characterization of the AP/Al/Fe2O3 ternary nano-thermites

A novel ammonium perchlorate (AP)/aluminum (Al)/iron oxide (Fe₂O₃) nano-thermites was prepared by orderly using sol–gel, wet impregnation, and solvent-anti-solvent processes. Samples prepared in this work were characterized by scanning electron microscope (SEM), nitrogen adsorption–desorption tests, X-ray diffraction (XRD), and differential scanning calorimetric (DSC) measurements. The results showed that AP and nano-aluminum were dispersed in the pores of the iron oxide gel, resulting in a large specific surface area (84.7 m² g^?1). The XRD results showed that AP dispersed homogeneously in the energetic composites at nano-scale. DSC analyses indicate that the Al/Fe₂O₃ nano-thermites played a catalytic role in the thermal decomposition of AP, thus the interaction of thermite reaction was greatly enhanced by accelerated decomposition of AP. The experimental results showed that the as-prepared AP/Al/Fe₂O₃ nano-thermites were of high energy, making it a competitive candidate material in the field of micro-propellants.     

MnO2 nanozyme induced the chromogenic reactions of ABTS and TMB to visual detection of Fe2+ and Pb2+ ions in water

In this study, we used a simple and rapid colourimetric reaction for visual sensing of Fe²⁺ and Pb²⁺ ions in water by employing nano-MnO₂ as a natural oxidase mimic to respectively catalyse ABTS and TMB in citrate-phosphate buffer solution (C-PBS) at 25°C and pH 3.8. It was found that nano-MnO₂ possessed highly oxidase-mimicking activity with the K_m values of 0.030 and 0.027 toward ABTS and TMB, respectively, indicating TMB had a stronger affinity on nano-MnO₂ than ABTS. Interestingly, the presence of 0.01 mmol·L^?1 Fe²⁺/Pb²⁺ ion was able to significantly down-regulate the activity of MnO₂ nanozyme in nano-MnO₂-mediated ABTS reaction processes (P < 0.01), which mainly due to the strong adsorption of metal ion toward nano-MnO₂ surface via the electrostatic attractions, thus leading to the passivation and inactivation of MnO₂ nanozyme catalytic activity. Thereinto, Fe²⁺ reacted with multivalent manganese by oxidation-reduction, while Pb²⁺ was specifically adsorbed onto the surface of MnO₂ nanozyme and formed complexes. Notably, only Fe²⁺ ion inhibited the activity of MnO₂ nanozyme-TMB with a detection limit as low as 1.0 μmol·L^?1. In MnO₂ nanozyme-ABTS sensing systems, Fe²⁺ and Pb²⁺ ions detection limit of 0.5 and 2.0 μmol·L^?1 were, respectively, achieved with a linear response range of 0–0.02 and 0–0.8 mmol·L^?1, implying the developed MnO₂ nanozyme-ABTS sensor was potentially applicable for the visual determination of Fe²⁺ and Pb²⁺ ions in water. In the real water samples, MnO₂ nanozyme-ABTS achieved high accuracy (relative errors: 3.4?10.5%) and recovery (96?110%) for respective detection of Fe²⁺ and Pb²⁺ ions. The simple and rapid MnO₂ nanozyme-ABTS sensing systems might provide a practical assay for visual detection of Fe²⁺ and Pb²⁺ ions in the environmental water samples.     

TiO2纳米管阵列光电催化氧化处理氨氮废水

用电化学阳极氧化法制备了高度有序的钛基二氧化钛纳米管阵列薄膜。用场发射扫描电镜(FE-SEM)、X射线衍射(XRD)表征样品的形貌与晶型特征。以二氧化钛纳米管阵列为光阳极,石墨为对电极,测试了不同pH值和外加偏压条件下的光电流响应和光电催化氧化降解NH4Cl水溶液(以N计,100 mg·L-1)的效率。结果表明:所制备的TiO2纳米管阵列具有锐钛矿和金红石的混晶结构,且主要晶型为锐钛矿。光电流响应的强弱与光电催化氧化效率的高低相对应,降解氨氮废水的最佳条件为pH=11,偏压为1.0 V。     

正交结构LixMnO2正极材料的合成及其电化学性能研究

0引言随着社会的进步,人们对化学电源提出了高能量、长寿命、低成本、低环境污染的要求。1990年由日本Sony能源公司率先研制成功的锂离子电池可以部分满足上述要求,一经问世,便迅速在便携式电子设备、电动汽车等众多领域展示了广阔的应用前景,掀起了锂离子二次电池的研究热潮。     

Determination of heats of aluminothermic redox reaction of V2O5 and MnO2

Differential thermal analysis has been used for quantitative determination of heats of aluminothermic redox reaction of MnO₂ and V₂O₅ over a wide range of temperatures. Heat of reaction V₂O₅?Al and MnO₂?Al systems have been determined using the calibration plot established. The experimentally determined values compare well with those predicted from thermodynamic data available in the literature. It has been found that V₂O₅?Al system involves a higher heat of reaction in comparison to the MnO₂?Al system.