壳聚糖基多孔碳材料的制备及其超级电容性能

以胶态SiO₂纳米粒子为模板,壳聚糖为碳源,ZnCl₂为活化剂,制备了具有不同比表面积和孔体积的氮掺杂介孔碳。采用多种表征手段对碳材料的微观形貌、比表面积和孔道结构进行了表征,探究了壳聚糖与SiO₂纳米粒子的比例以及ZnCl₂活化剂对碳材料孔体积和比表面积的影响。结果表明,在未使用活化剂时碳材料(CSi-1.75)的孔体积高达4.53 cm³·g^-1,但其比表面积最小(729 m²·g^-1);使用ZnCl₂作为活化剂制备的碳材料(CSi-1.75-Zn)比表面积为1 032 m²·g^-1,但其孔体积下降到1.99 cm³·g^-1,且具有最多的吡啶氮和吡咯氮。在以6.0 mol·L^-1KOH为电解液的三电极体系中,当电流密度为0.5 A·g^-1时,CSi-1.75...     

Effect of pore characteristics on electrochemical capacitance of activated carbons

Activated carbons (ACs) for electric double layer capacitors (EDLCs) were fabricated from waste tea leaves, activated with the pore-forming substances ZnCl₂ then, carbonized at high-temperature in N₂ atmosphere. The surface texture and porosity of the ACs were determined using transmission electron micros-copy and N₂ adsorption/desorption studies. The surface area of the 20 wt % ZnCl₂ treated sample was found to be 1029 m²g^?1 and had a distribution of micropores and mesopores. The electrochemical properties of the ACs were evaluated by using cyclic voltammetry and galvanostatic charge-discharge studies. ACs from waste tea leaves exhibited excellent specific capacitance as high as 196 F g^?1 in the 0.1 M Na₂SO₄ neutral electrolyte, with rectangular-like cyclic voltammetry curves at a cell potential of 1.5 V and good cyclability with a capacitance retention of 95% at a high current density of 100 mA g^?1 for 2000 cycles. The results show that the pore texture properties and specific surface area of ACs are dominated by changing carbonization temperature and the amount of activating agent ZnCl₂. The electrochemical performance is influenced mainly by surface area, but the pore size distribution becomes a dominating factor for specific capacitance of a carbon electrode material when the pore structure is in range of micropores/mesopores.     

Hierarchical Carbon Nanowire/Ni@MnO2 Nanocomposites for High-Performance Asymmetric Supercapacitors

A 3D hierarchical carbon cloth/nitrogen-doped carbon nanowires/Ni@MnO₂ (CC/N-CNWs/Ni@MnO₂) nanocomposite electrode was rationally designed and prepared by electrodeposition. The N-CNWs derived from polypyrrole (PPy) nanowires on the carbon cloth have an open framework structure, which greatly increases the contact area between the electrode and electrolyte and provides short diffusion paths. The incorporation of the Ni layer between the N-CNWs and MnO₂ is beneficial for significantly enhancing the electrical conductivity and boosting fast charge transfer as well as improving the charge-collection capacity. Thus, the as-prepared 3D hierarchical CC/N-CNWs/Ni@MnO₂ electrode exhibits a higher specific capacitance of 571.4 F g⁻¹ compared with those of CC/N-CNWs@MnO₂ (311 F g⁻¹), CC/Ni@MnO₂ (196.6 F g⁻¹), and CC@MnO₂ (186.1 F g⁻¹) at 1 A g⁻¹ and remarkable rate capability (367.5 F g⁻¹ at 10 A g⁻¹). Moreover, asymmetric supercapacitors constructed with CC/N-CNWs/Ni@MnO₂ as cathode material and activated carbon as anode material deliver an impressive energy density of 36.4 W h kg⁻¹ at a power density of 900 W kg⁻¹ and a good cycling life (72.8 % capacitance retention after 3500 cycles). This study paves a low-cost and simple way to design a hierarchical nanocomposite electrode with large surface area and superior electrical conductivity, which has wide application prospects in high-performance supercapacitors.     

壳聚糖基多孔碳材料的制备及其超级电容性能

以胶态SiO₂纳米粒子为模板,壳聚糖为碳源,ZnCl2为活化剂,制备了具有不同比表面积和孔体积的氮掺杂介孔碳。采用多种表征手段对碳材料的微观形貌、比表面积和孔道结构进行了表征,探究了壳聚糖与SiO₂纳米粒子的比例以及ZnCl2活化剂对碳材料孔体积和比表面积的影响。结果表明,在未使用活化剂时碳材料(CSi-1.75)的孔体积高达4.53 cm³·g^-1,但其比表面积最小(729 m²·g^-1);使用ZnCl₂作为活化剂制备的碳材料(CSi-1.75-Zn)比表面积为1032 m²·g^-1,但其孔体积下降到1.99 cm³·g^-1,且具有最多的吡啶氮和吡咯氮。在以6.0 mol·L^-1 KOH为电解液的三电极体系中,当电流密度为0.5 A·g^-1时,CSi-1.75-Zn的比电容为344 F·g^-1,而CSi-1.75的比电容仅为255 F·g^-1。这表明碳材料的比表面积对超级电容性能影响最大,而孔体积影响较小。电容贡献分析结果表明,相对于CSi-1.75,CSi-1.75-Zn的双电层电容和赝电容都得到了提高,这表明更大的比表面积和更多的吡啶氮和吡咯氮有利于提高碳材料的超级电容性能。     

High Energy Density Heteroatom (O,N and S) Enriched Activated Carbon for Rational Design of Symmetric Supercapacitors

Carbon-based symmetric supercapacitors (SCs) are known for their high power density and long cyclability, making them an ideal candidate for power sources in new-generation electronic devices. To boost their electrochemical performances, deriving activated carbon doped with heteroatoms such as N, O, and S are highly desirable for increasing the specific capacitance. In this regard, activated carbon (AC) self-doped with heteroatoms is directly derived from bio-waste (lima-bean shell) using different KOH activation processes. The heteroatom-enriched AC synthesized using a pretreated carbon-to-KOH ratio of 1:2 (ONS@AC-2) shows excellent surface morphology with a large surface area of 1508 m² g⁻¹. As an SC electrode material, the presence of heteroatoms (N and S) reduces the interfacial charge-transfer resistance and increases the ion-accessible surface area, which inherently provides additional pseudocapacitance. The ONS@AC-2 electrode attains a maximum specific capacitance (C_sp) of 342 F g⁻¹ at a specific current of 1 Ag⁻¹ in 1 m NaClO₄ electrolyte at the wide potential window of 1.8 V. Moreover, as symmetric SCs the ONS@AC-2 electrode delivers a maximum specific capacitance (C_sc) of 191 F g⁻¹ with a maximum specific energy of 21.48 Wh kg⁻¹ and high specific power of 14 000 W kg⁻¹ and excellent retention of its initial capacitance (98 %) even after 10000 charge/discharge cycles. In addition, a flexible supercapacitor fabricated utilizing ONS@AC-2 electrodes and a LiCl/polyvinyl alcohol (PVA)-based polymer electrolyte shows a maximum C_sc of 119 F g⁻¹ with considerable specific energy and power.     

Highly Dispersible Hexagonal Carbon–MoS2–Carbon Nanoplates with Hollow Sandwich Structures for Supercapacitors

MoS₂, a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon–MoS₂–carbon was successfully synthesized through an l -cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS₂ flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m² g⁻¹, a total pore volume of 0.677 cm³ g⁻¹, and fairly small mesopores (≈5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g⁻¹ (0.12 F cm⁻²) at a constant current density of 0.1 A g⁻¹; thus suggesting that hollow carbon–MoS₂–carbon nanoplates are promising candidate materials for supercapacitors.     

Catalytically Active CoSe2 Supported on Nitrogen-Doped Three Dimensional Porous Carbon as a Cathode for Highly Stable Lithium-Sulfur Battery

Lithium-sulfur batteries are promising secondary energy storage devices that are mainly limited by its unsatisfactory cyclability owing to inefficient reversible conversion of sulfur and lithium sulfide on the cathode during the discharge/charging process. In this study, nitrogen-doped three-dimensional porous carbon material loaded with CoSe₂ nanoparticles (CoSe₂-PNC) is developed as a cathode for lithium-sulfur battery. A combination of CoSe₂ and nitrogen-doped porous carbon can efficiently improve the cathode activity and its conductivity, resulting in enhanced redox kinetics of the charge/discharge process. The obtained electrode exhibits a high discharge specific capacity of 1139.6 mAh g⁻¹ at a current density of 0.2 C. After 100 cycles, its capacity remained at 865.7 mAh g⁻¹ thus corresponding to a capacity retention of 75.97 %. In a long-term cycling test, discharge specific capacity of 546.7 mAh g⁻¹ was observed after 300 cycles performed at a current density of 1 C.     

香菇生物质基氮掺杂微孔碳材料的制备及其在超级电容器中的应用

采用简易浸泡法和一步碳化/活化法制备香菇生物质基氮掺杂微孔碳材料(NMCs),利用扫描电子显微镜(SEM)、透射电子显微镜(SEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)对材料的结构形貌进行表征,并研究了其超级电容特性。测试结果表明,NMCs的微孔比表面积高达1 594 m~2·g~(-1),且拥有更高数量的含氮官能团,其吡啶型含氮官能团比例也有所提高,展现出优异的超级电容特性。在0.5 A·g~(-1)的电流密度下,其比容量高达325 F·g~(-1),当电流密度上升到20 A·g~(-1)时,其比电容仍然高达180 F·g~(-1),表现出优异的倍率性能;同时,在5 A·g~(-1)的电流密度下,电极经历5 000次充放电循环后具有97.7%的比容量保持率,展现出优异的循环稳定性。这主要归因于NMCs超高的微孔比表面积和丰富的含氮官能团。     

Preparation of activated carbon from polyaniline by zinc chloride activation as supercapacitor electrodes

Activated carbon for supercapacitor electrode was prepared from polyaniline using chemical activation with ZnCl₂. The morphology, surface chemical composition, and surface area of the as-prepared carbon materials were investigated by scanning electron microscope, atomic force microscopy, X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller measurement, respectively. Electrochemical characteristics were evaluated by cyclic voltammograms, galvanostatic charge/discharge, and electrochemical impedance spectroscopy tests in 6.0 mol L⁻¹ KOH aqueous solution. The electrochemical measurements showed that ZnCl₂ activation led to better capacitive performances. The activated carbon presented a high-specific gravimetric capacitance of 174 F g⁻¹, with rectangular cyclic voltammetry curves at a scan rate of 2 mV s⁻¹, and it remained 93% even at a high scan rate of 50 mV s⁻¹. These demonstrated that activated carbon would be a promising electrode material for supercapacitors.

     

Supercapacitor performance of activated carbon derived from rotten carrot in aqueous,organic and ionic liquid based electrolytes

In this work, we report the synthesis of porous activated carbon (AC). AC was derived from rotten carrot, at different values of activating temperature under inert atmosphere, employing chemical activation method and ZnCl₂ as activation agent. On the basis of results observed by surface area and pore size analysis, effect of activation temperature on synthesized AC was determined. Other material properties such as morphology, thermal stability, vibrational response, and crystal structure of prepared AC were studied using standard techniques of material characterization. Further, the electrochemical performance of synthesized AC was studied as an electrode, in aqueous, organic and ionic liquid based electrolyte. It was found that the synthesized AC based electrode exhibits highest specific capacitance (135.5?F?g^?1 at 10?mHz) in aqueous electrolyte and highest specific energy (29.1?Wh?kg^?1 at 2.2?A?g^?1) and specific power (142.5?kW?kg^?1 at 2.2?A?g^?1) in ionic liquid based electrolyte. This shows the suitability of synthesized material for use in energy storage applications.     

Boosting Supercapacitor Performance of Graphene by Coupling with Nitrogen-Doped Hollow Carbon Frameworks

Graphene as a suitable electrode has been extensively used for electrochemical double-layer capacitors based on its excellent properties, including high electrical conductivity and large specific surface area. However, one of the drawbacks is the unavoidable stacking tendency between the graphene nanosheets, resulting in limited electrochemically specific surface area. Herein, novel graphene nanosheets supported by hollow nitrogen-doped carbon frameworks derived from ZIF-8 (GPNC) were fabricated through a simple polyethyleneimine (PEI)-assisted pyrolysis strategy, to boost capacitance performance. Benefiting from the unique scaffold/support role of hollow nitrogen-doped carbon frameworks within the graphene interlayer, the GPNC with a large specific surface area, along with ample micropore/mesopore channels and high nitrogen content, is capable of facilitating electron and electrolyte ion migration kinetics and enhancing intrinsic electrochemical activity. Thus, the GPNC exhibits the highest charge storage of 218 F g⁻¹ and superior rate capability of 74 % when the current density increased from 0.5 to 20 Ag⁻¹ in comparison to pristine graphene and common ZIF-derived carbon/graphene electrodes. The assembled GPNC//GPNC two-electrode system further delivers a maximum power of 9080 Wkg⁻¹ with outstanding electrochemical retention of 84 % over 10 000 cycles.     

活性碳纳米管的制备及其在有机电解液中的电容性能研究

以KOH为活化剂对碳纳米管进行化学活化制备双电层电容器用高比表面积活性碳纳米管. 采用TEM和N₂吸附法表征活性碳纳米管的结构, 采用恒流充放电、循环伏安、交流阻抗等评价其在1 mol•L^－1 Et₄NBF₄/PC中的电容性能. 随活化剂用量增大、活化温度升高和活化时间的延长, 活性碳纳米管的比表面积和比电容都呈增大的趋势. 活化剂用量为3∶1, 800 ℃活化4 h制备的活性碳纳米管的比表面积663 m²•g^－1, 比活化前提高了3倍, 其比电容达57.2 F• g^－1, 比活化前提高了2倍. 将活性碳纳米管的比电容与其比表面积相关联, 发现两者之间具有非常好的线性关系, 并分析了原因.     

Preparation of activated carbon from cotton stalk and its application in supercapacitor

High specific capacitance and low cost are the critical requirements for a practical supercapacitor. In this paper, a new activated carbon with high specific capacitance and low cost was prepared, employing cotton stalk as the raw material, by using the phosphoric acid (H₃PO₄) chemical activation method. The optimized conditions were as follows: the cotton stalk and activating agent with a mass ratio of 1:4 at an activation temperature of 800 °C for 2 h. The samples were characterized by nitrogen adsorption isotherms at 77 K. The specific surface area and pore volume of activated carbon were calculated by Brunauer–Emmett–Teller (BET) and t-plot methods. With these experimental conditions, an activated carbon with a BET surface area of 1,481 cm²?g^?1 and micropore volume of 0.0377 cm³?g^?1 was obtained. The capacitance of the prepared activated carbon was as high as 114 F?g^?1.The results indicate that cotton stalk can produce activated carbon electrode materials with low cost and high performance for electric double-layer capacitor.     

Bio-inspired and Eco-friendly Synthesis of 3D Spongy Meso-Microporous Carbons from CO2 for Supercapacitors

Inspired by the spongy bone structures, three-dimensional (3D) sponge-like carbons with meso-microporous structures are synthesized through one-step electro-reduction of CO₂ in molten carbonate Li₂CO₃−Na₂CO₃−K₂CO₃ at 580 °C. SPC4-0.5 (spongy porous carbon obtained by electrolysis of CO₂ at 4 A for 0.5 h) is synthesized with the current efficiency of 96.9 %. SPC4-0.5 possesses large electrolyte ion accessible surface area, excellent wettability and electronical conductivity, ensuring the fast and effective mass and charge transfer, which make it an advcanced supercapacitor electrode material. SPC4-0.5 exhibits a specific capacitance as high as 373.7 F g⁻¹ at 0.5 A g⁻¹, excellent cycling stability (retaining 95.9 % of the initial capacitance after 10000 cycles at 10 A g⁻¹), as well as high energy density. The applications of SPC4-0.5 in quasi-solid-state symmetric supercapacitor and all-solid-state flexible devices for energy storage and wearable piezoelectric sensor are investigated. Both devices show considerable capacitive performances. This work not only presents a controllable and facile synthetic route for the porous carbons but also provides a promising way for effective carbon reduction and green energy production.     

Facile preparation of nitrogen-doped porous carbon for high performance symmetric supercapacitor

In this work, the micromolecule l-glutamic acid (Glu) is employed as nitrogen-rich precursor to prepare a novel porous carbon, and ZnCl₂ is used as activating agent to improve the surface area and electrochemical performance of the carbon. The nitrogen content of the carbon (Glu-2.5) prepared by Glu and ZnCl₂ with a mass ratio of 1:2.5 retains as high as 7.1 % at an activation temperature of 700 °C. The surface area and pore volume of Glu-2.5 are 1007.4 m² g^?1 and 0.57 cm³ g^?1, respectively. Glu-2.5 exhibits a high specific capacitance of 330.6 F g^?1 in 2 M KOH electrolyte at the current density of 1 A g^?1and good cycling stability (89 % retention of capacitance after 5000 charge/discharge cycles). More importantly, the assembled symmetric supercapacitor using Glu-2.5 as electrodes reveals a high energy density (16.7 Wh kg^?1) under the power density of 404.7 W kg^?1. Owing to its inherent advantages, Glu-2.5 could be a promising and scalable alternative applied to energy storage/conversion.     

静电纺丝制备多孔碳纳米纤维及其电化学电容行为

采用静电纺丝技术,以聚丙烯腈(PAN)/醋酸锌为前驱体制备复合纳米纤维,随后经碳化、酸化获得多孔碳纳米纤维.扫描电子显微镜(SEM)观察发现,碳纳米纤维表面分布大量孔洞.N2吸脱附等温曲线(BET)测试材料比表面积达413m2·g-1.循环伏安法(CV)和恒流充放电(CP)性能测试表明:多孔碳纳米纤维具有较好的电化学性能,在1A·g-1的电流密度下比电容达275F·g-1.相比碳纳米纤维比容量提高了162%.     

Lanthanum ion–impregnated granular activated carbon for the removal of phenol from aqueous solution: Equilibrium and kinetic study

The current study discusses application of the lanthanum ions (La³⁺) as an activating agent incorporated /immobilized into coconut shell–based granular activated carbon (GAC) for porosity development; subsequently, the carbon material is used for the adsorption of phenol from aqueous solutions. The new carbons were characterized using FTIR, XRD, CHNO, burn off, and carbon yield. The surface functional groups were determined by Boehm titration. The Brunauer–Emmett–Teller (BET) surface area of the carbons is 953 m² g⁻¹ (GACLa1073), 997 m² g⁻¹ (GAC383), and 973 m² g⁻¹ (GACO383). Langmuir, Freundlich, Dubinin–Radushkevich, and John–Sivanandan Achari (J-SA) isotherm models on the equilibrium isotherm data were examined for the new carbon-phenol system. It is found that the Langmuir isotherm fits better with a monolayer adsorption capacity, highest for GACLa1073 (387.59 mg g⁻¹) followed by GAC383 (303.03 mg g⁻¹) and GACO383 (197.62 mg g⁻¹). Kinetic studies reveal that the adsorption system follows the pseudo–second-order kinetic model. Isotherm analysis by the phase change method of John-Sivanandan Achari (J-SA) isotherm gives a better insight into adsorption phenomena, which is accompanied by regeneration studies of carbon with >75% for GACLa1073 after three cycles.     

Few-Layer MoS2 Nanosheets Encapsulated in N-Doped Carbon Hollow Spheres as Long-Life Anode Materials for Lithium-Ion Batteries

Two-dimensional molybdenum disulfide (MoS₂) has been recognized as a promising anode material for lithium-ion batteries (LIBs) due to its high theoretical capacity, but its rapid capacity decay owing to poor conductivity, structure pulverization, and polysulfide dissolution presents significant challenges in practical applications. Herein, triple-layered hollow spheres in which MoS₂ nanosheets are fully encapsulated between inner carbon and outer nitrogen-doped carbon (NC) were fabricated. Such an architecture provides high conductivity and efficient lithium-ion transfer. Moreover, the NC shell prevents aggregation and exfoliation of MoS₂ nanosheets and thus maintains the integrity of the nanostructure during the charge/discharge process. As anode materials for LIBs, the C@MoS₂@NC hollow spheres deliver a high reversible capacity (747 mA h g⁻¹ after 100 cycles at 100 mA g⁻¹) and excellent long-cycle performance (650 mA h g⁻¹ after 1000 cycles at 1.0 A g⁻¹), which confirm its potential for high-performance LIBs.     

A facile synthesis of hierarchical porous carbon derived from renewable lignin for high-performance supercapacitor

In this work, we proposed a facile one-pot pyrolysis method to conveniently manufacture lignin-derived carbon materials with graded porous construction for use in supercapacitors. The renewable lignin was selected as precursor, while the potassium citrate was used as a pore-forming agent. The properties of the prepared lignin-derived carbon (LAC) and the performance for supercapacitor application were thoroughly evaluated. The LAC at optimal preparation conditions shows a layered porous structure with a large specific surface area of 3174 cm² g⁻¹ and pore volume of 2.796 cm³ g⁻¹, where the specific capacitance reach to 241 F g⁻¹ at 1 A g⁻¹ scan rate in 6 M KOH electrolyte solution. At the same time, the specific capacitance remains at 220 F g⁻¹ even at an excessive scan velocity of 20 A g⁻¹, while the capacitance retention is still close to 91.3%. The capacitance retention rate is stable above 95% after 10,000 charge/discharge cycles, which shows the desired long-time stability. All these results demonstrate the outstanding properties of the new prepared LAC material and the considerable application potential in the field of electrical energy storage.     

Microporous Carbon Nanofibers Derived from Poly(acrylonitrile-co-acrylic acid) for High-Performance Supercapacitors

Carbon nanofiber (CNF)-based supercapacitors have promising applications in the field of energy storage. It is desirable, but remains challenging, to develop CNF electrode materials with large specific surface area (SSA), high specific capacitance (SC), and high power density, as well as excellent cycling stability and high reliability. Herein, acrylonitrile–acrylic acid copolymer P(AN-co-AA) was synthesized for the preparation of nitrogen-doped microporous CNFs. Thermal degradation of the AA segment leads to the formation of micropores that are distributed not only on the CNF surface, but also inside the material. The microporous structure and nitrogen content can be manipulated at the molecular level by adjusting the weight ratio between AN and AA, and the SSA and SC could reach as high as 1099 m² g⁻¹ and 156 F g⁻¹, respectively. After KOH activation, the activated CNFs have an extremely high SSA of 2117 m² g⁻¹ and SC of 320 F g⁻¹, which are among the highest values ever reported for electric double-layer supercapacitors with an alkaline electrolyte. Furthermore, the capacitance retention, which can be maintained at 99 % even after 16 000 cyclic tests, reveals outstanding durability and repeatability.