The effect of some triazole derivatives as inhibitors for the corrosion of mild steel in 5 % hydrochloric acid

Corrosion inhibition by triazole derivatives (n-MMT) on mild steel in 5 % hydrochloric acid (HCl) solutions has been investigated by weight loss and electrochemical methods. The results obtained revealed that these compounds performed excellently as corrosion inhibitors for mild steel in HCl solution. Potentiodynamic polarization studies showed that they suppressed both the anodic and cathodic processes and inhibited the corrosion of mild steel by blocking the active site of the metal. The effect of temperature on the corrosion behavior of mild steel in 5 % HCl with the addition of different concentrations of the inhibitors was studied in the temperature range from 303 to 333 K. The associated activation corrosion and free adsorption energies were determined. The adsorption of these compounds on the mild steel surface obeys the Langmuir adsorption isotherm. The effect of molecular structure on the inhibition efficiency has been investigated by quantum chemical calculations. The electronic properties of inhibitors were calculated and are discussed.     

某些含氮杂环化合物对20^#钢的缓蚀作用研究

用失重法、交流阻抗和极化曲线法研究了1mol/L HCl溶液中吡啶、喹啉及其衍生物对20~#钢的缓蚀作用。根据吡啶和喹啉在20~#钢表面上的复盖度与浓度及温度的关系,探讨了它们在20~#钢上的吸附行为,并提出了吸附模式。结果表明,吡啶和喹啉的吸附遵循Flory-Huggins吸附等温式。文中还估算了吡啶和喹啉吸附的热力学参数。     

Experimental study of inhibition of corrosion of mild steel in 1 M HCl solution by two newly synthesized calixarene derivatives

Inhibition of the corrosion of mild steel in molar hydrochloric acid by two calixarenes, including the effect of inhibitor concentration and temperature, has been investigated by use of weight loss and electrochemical measurements (polarisation and impedance). The results obtained showed that the rate of corrosion decreased substantially in the presence of the compounds, with maximum inhibition of 98.2 % by one of the compounds at a concentration of 10^?3 M. The effect of temperature on corrosion behaviour in the presence of different concentrations of the two new calixarenes was studied in the range 45–75 °C. The efficiency of inhibition by the compounds increased with increasing inhibitor concentration and was independent of temperature. Polarisation curves revealed that the calixarenes are mixed-type inhibitors. Adsorption of the inhibitors by the carbon steel surface obeyed the Langmuir adsorption isotherm. Some thermodynamic data for the dissolution and adsorption processes were also determined.     

Inhibition of mild steel corrosion in 5 % HCl solution by 5-(2-hydroxyphenyl)-1,2,4-triazole-3-thione

A new corrosion inhibitor, namely 5-(2-hydroxyphenyl)-1,2,4-triazole-3-thione (5-HTT), has been synthesized and its influence on corrosion inhibition of mild steel in 5 % HCl solution has been studied using weight loss method and electrochemical measurements. Potentiodynamic polarization measurements clearly reveal that the investigated inhibitor is of mixed type, and it inhibits the corrosion of the steel by blocking the active site of the metal. Changes in impedance parameters were indicative of adsorption of 5-HTT on the metal surface, leading to the formation of protective films. The degree of the surface coverage of the adsorbed inhibitors was determined by weight loss measurements, and it was found that the adsorption of these inhibitors on the mild steel surface obeys the Langmuir adsorption isotherm. The effect of the temperature on the corrosion behavior with addition of 5 × 10^?4 M of the inhibitor was studied in the temperature range 30–60 °C. The reactivity of this compound was analyzed through theoretical calculations based on density functional theory to explain the different efficiency of these compounds as a corrosion inhibitor.     

The inhibitory effect of bipyridine and its cobalt complex on the corrosion behaviour of carbon steel in acidic medium

The bipyridine (bipy) and its cobalt complex (Co-bipy) were tested as corrosion inhibitors for N80 carbon steel in 0.1 M H₂SO₄ solution by electrochemical polarization and electrochemical impedance spectroscopy (EIS) method. Scanning electron microscopy (SEM) techniques were used to characterize the mild steel surface. The test results showed that the complex and ligand are mixed-type inhibitors and the compounds are adsorbed on the steel surface according to Temkin adsorption isotherm. The inhibition efficiency of the inhibitors follows the trend Co-bipy > bipy. The adsorption of the inhibitors can be classifies as physical adsorption.     

Inhibition effect of environmentally benign Karanj (Pongamia pinnata) seed extract on corrosion of mild steel in hydrochloric acid solution

The inhibition of the corrosion of mild steel in hydrochloric acid solution by the seed extract of Karanj (Pongamia pinnata) has been studied using weight loss, electrochemical impedance spectroscopy, potentiodynamic polarization, and linear polarization techniques. Inhibition was found to increase with increasing concentration of the extract. The effect of temperature, immersion time, and acid concentration on the corrosion behavior of mild steel in 1 M HCl with addition of extract was also studied. The adsorption of the extract on the mild steel surface obeyed the Langmuir adsorption isotherm. Values of inhibition efficiency calculated from weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy are in good agreement. Polarization curves showed that Karanj (P. pinnata) seed extract behaves as a mixed-type inhibitor in hydrochloric acid. The activation energy as well as other thermodynamic parameters for the inhibition process was calculated. The adsorbed film on mild steel surface containing Karanj (P. pinnata) seed extract inhibitor was also measured by Fourier transform infrared spectroscopy. The results obtained showed that the seed extract of Karanj (P. pinnata) could serve as an effective inhibitor of the corrosion of mild steel in hydrochloric acid media.     

Synthesis and Characterization of Some Amino Acid Derived Schiff Bases Bearing Nonionic Species as Corrosion Inhibitors for Carbon Steel in 2N HCl

A novel series of nonionic amino acid Schiff-Bases were synthesized and characterized using different spectroscopic tools to elucidate their chemical structures. The surface and thermodynamic properties of these compounds were studied using classical measurements including surface and interfacial tension and emulsification tendency. The surface parameters of these compounds including surface tension, critical micelle concentration (CMC), effectiveness (π_cmc), efficiency (Pc₂₀), maximum surface excess (Γ_max), and minimum surface area (A_min) showed their good surface activity. Their thermodynamic parameters of adsorption and micellization including free energy change of micellization and adsorption showed their tendency toward adsorption at the interfaces and also micelle formation at lower concentrations. The synthesized compounds were also evaluated as corrosion inhibitors for carbon steel at different doses (400, 200, 100, 50, and 25 ppm) in 2 N HCl using gravimetric technique (weight loss). The results showed that these inhibitors are characterized by very high corrosion inhibition efficiency ranged between 99.93% and 97.98% and low corrosion rates varied between 0.09 mpy and 0.17 mpy for higher doses (400 ppm). The efficiency of inhibition was decreased by increasing the exposure time. The most efficient corrosion inhibitor of the synthesized compounds was the inhibitor which contains polyethylene oxide chain length of 23 EO units and alkyl chain length of 12 methylene groups. The effect of the hydrophobic and hydrophilic chain length in the inhibitor molecules was discussed and rationalized with their inhibition efficiency. The tendency of these inhibitors toward complexation with the transition metals was also discussed in order to explain their higher efficiency.     

Experimental and theoretical studies on the inhibition potentials of some derivatives of cyclopenta‐1,3‐diene for the corrosion of mild steel in HCl solutions

The inhibition of the corrosion of mild steel in HCl by some cyclopentadiene‐1,3‐diene derivatives, namely, 1‐(thiophen‐2‐yl)ethanone (2APT), 1‐(1H‐pyrrol‐2‐yl)ethanone (2AP), and (E)‐2‐(1‐hydrazonoethyl)‐1H‐pyrrole (2APH)), was studied experimentally using weight loss and hydrogen gas evolution measurements. The theoretical aspect was studied using the density functional theory and quantitative structure activity relation (QSAR) methods. The results obtained indicated that the studied compounds are good inhibitors for the corrosion of mild steel in HCl. The adsorption of the inhibitor on mild steel surface was found to be spontaneous, exothermic, and obeyed the Langmuir adsorption isotherm model. A good correlation was found between experimental inhibition efficiencies and some calculated quantum chemical parameters and also with the theoretical inhibition efficiencies obtained from QSAR modeling. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Adsorption and inhibition properties of Tephrosia Purpurea as corrosion inhibitor for mild steel in sulphuric acid solution

Abstract

The present study investigated the adsorption and inhibition behavior of leaf extract of Tephrosia Purpurea (T. purpurea) on mild steel corrosion in 1?N H₂SO₄ solution using electrochemical and surface morphological methods. Techniques adopted for electrochemical studies were Potentiodynamic Polarization and Electrochemical Impedance Spectroscopy (EIS) technique; and surface morphological studies were carried out using Scanning Electron Microscopy (SEM), and Atomic Force Microscopy (AFM). The leaf extract of T. purpurea was characterized using UV-Visible spectroscopy (UV-Vis), Fourier-Transform Infrared Spectroscopy (FT-IR), Nuclear Magnetic Resonance Spectroscopy (NMR) and Gas Chromatography – Mass Spectrometry (GCMS). The results obtained from electrochemical studies exhibited the potential of T. purpurea as good corrosion inhibitor. And, it was found that, the inhibition efficiency (I.E in %) increases with increase in concentration of the inhibitor molecules, the optimum inhibitor concentration observed was 300?ppm and the inhibition efficiency of 93% was observed at this inhibitor concentration. Above 300?ppm, there was not much changes in inhibition efficiency. Polarization studies provided the information that the inhibition is of mixed type and EIS confirmed that the corrosion process is controlled by single charge transfer mechanism. And, it was obtained that, the adsorption of inhibitor molecules obeys Langmuir adsorption isotherm. The inhibition is mainly by the adsorption of inhibitor molecules on the mild steel electrode surface, which was confirmed by FT-IR, SEM and AFM studies. Through all the experimental results, it can be arrived that, the leaf extract of T. purpurea performed as a good corrosion inhibitor for mild steel in 1?N sulfuric acid medium.     

Experimental,Monte Carlo and molecular dynamics simulations to investigate corrosion inhibition of mild steel in hydrochloric acid solutions

The efficiency of three furan derivatives, namely 2-(p-toluidinylmethyl)-5-methyl furan (Inh. A), 2-(p-toluidinylmethyl)-5-nitro furan (Inh. B) and 2-(p-toluidinylmethyl)-5-bromo furan (Inh. C), as possible corrosion inhibitors for mild steel in 1.0 M HCl, has been determined by weight loss and electrochemical measurements. These compounds inhibit corrosion even at very low concentrations, and 2-(p-toluidinylmethyl)-5-methyl furan (Inh. A) is the best inhibitor. Polarization curves indicate that all compounds are mixed-type inhibitors, affecting both cathodic and anodic corrosion currents. Adsorption of furan derivatives on the mild steel surface follows the Langmuir adsorption isotherm, and the calculated Gibbs free energy values confirm the chemical nature of the adsorption. Monte Carlo simulations technique incorporating molecular mechanics and molecular dynamics can be used to simulate the adsorption of furan derivatives on mild steel surface in 1.0 M HCl.     

Ceforanide: a new and efficient corrosion inhibitor for mild steel in HCl solution

The corrosion inhibition properties of ceforanide for mild steel in HCl solution were analyzed by electrochemical impedance spectroscopy, potentiodynamic polarization, and gravimetric methods. The increase in inhibitor concentration and immersion time showed a positive effect on inhibition efficiency. The experimental data showed a frequency distribution and therefore a modeling element with frequency dispersion behavior and a constant phase element have been used. In aqueous acid solution, mild steel reacts by evolution of hydrogen. Visual observations showed that the hydrogen evolution decreased (i.e., corrosion inhibition effect increased) with increasing concentration of ceforanide. Potentiodynamic polarization study revealed that ceforanide acted as a mixed type of inhibitor. The results obtained from different methods are in good agreement. The adsorption behavior of ceforanide is experimentally investigated by contact angle measurement on metal surface. The contact angle of metal surface to the acid solution increased with inhibitor concentration; thereby confirming the increased hydrophobic nature of metal surface to the acid solution having inhibitors.     

Cephalosporin antibiotics as new corrosion inhibitors for nickel in HCl solution

Inhibition of nickel corrosion in 1 M HCl solution in the absence and presence of some Cephalosporin antibiotics derivatives was investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and electrochemical frequency modulation (EFM) techniques. The results obtained show that the inhibition efficiency of these compounds depends on their concentrations and chemical structures. The inhibitive action of these compounds was discussed in terms of blocking the electrode surface by adsorption of the molecules through the active centers contained in their structures following the Langmuir adsorption isotherm. The polarization measurement showed that these inhibitors are acting as mixed inhibitors for both anodic and cathodic reactions. The effect of temperature on the rate of corrosion in the absence and presence of these compounds was also studied. The efficiencies obtained from the potentiodynamic polarization technique were in good agreement with those obtained from EIS and EFM techniques. This proves the validity of these tools in the measurements of the investigated inhibitors.     

An experimental and theoretical investigation on adsorption properties of some diphenolic Schiff bases as corrosion inhibitors at acidic solution/mild steel interface

The effect of novel synthesized three Schiff bases, namely, 1,3-bis[2-(2-hydroxy benzylidenamino) phenoxy] propane (P1), 1,3-bis[2-(5-chloro-2-hydroxybenzylidenamino) phenoxy] propane (P2), and 1,3-bis[2-(5-bromo-2-hydroxybenzylidenamino) phenoxy] propane (P3), on the corrosion of mild steel in 0.1 M HCl was investigated using potentiodynamic polarization and electrochemical impedance spectroscopy methods. Polarization measurements suggest that P1 acts as mixed type inhibitor while P2 and P3 behave as mainly cathodic inhibitors for acidic corrosion of steel. All electrochemical measurements show that inhibition efficiencies increase with increase in inhibitor concentration. This reveals that inhibitive actions of inhibitors were mainly due to adsorption on steel surface. Adsorption of these inhibitors follows Temkin adsorption isotherm. The correlation between the adsorption ability of inhibitors and their molecular structures has been investigated using quantum chemical parameters obtained by MNDO semi-empirical method. Calculated quantum chemical parameters indicate that Schiff bases adsorbed on steel surface by chemical mechanism.     

Inhibition of acid corrosion of mild steel by Anacyclus pyrethrum L. extracts

Inhibition of the corrosion of mild steel in sulfuric acid by extracts of Anacyclus pyrethrum L. (leaves and stems, AP-LS; flowers AP-F; roots, AP-R) has been studied by use of electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization. Anacyclus pyrethrum L. inhibited the corrosion of mild steel in 0.5 M H₂SO₄ solution. Polarization curves show that the different parts of plants act as anodic type inhibitors. Changes in impedance data (charge transfer resistance, R _t, and double layer capacitance, C _dl) were indicative of adsorption of the extracts on the metal surface, leading to the formation of protective films. The extent of surface coverage by the inhibitors was determined by measurement of ac impedance; it was found that adsorption of these inhibitors on the mild steel surface obeys the Langmuir adsorption isotherm. Activation energies in the presence and absence of AP-LS and AP-F were obtained by measuring the temperature dependence of the corrosion current.     

Anti-corrosive property of bioinspired environmental benign imidazole and isoxazoline heterocyclics: A cumulative studies of experimental and DFT methods

In the present study, four imidazoline (IDZ) and four isoxazolines (ISO) heterocyclics differing in the nature of methoxy (-OCH₃) and aromatic (phenyl and naphthyl) moieties are synthesized, characterized and evaluated as corrosion inhibitors for mild steel in acidic solution of 1 M HCl. Results showed that imidazoline based heterocyclic compounds are better corrosion inhibitors than isoxazoline based heterocyclics and both classes of compounds showed inhibition efficiency of more than 85% at 20 mgL⁻¹ concentration. Results further showed that inhibitors containing methoxy, phenyl, and naphthyl moieties showed higher protection efficiency as compared to the inhibitors without these moieties. PDP Study revealed that investigated IDZs and ISOs acted as mixed type inhibitors and their adsorption on the metallic surface followed the Langmuir adsorption isotherm model. All the experimental results were corroborated by density function theory (DFT) based quantum chemical calculations. Numerous DFT based indices calculated for neutral as well as protonated forms of the IDZs and ISOs in order to get better insight about metal-IDZs/ISOs interactions. Outcomes of the DFT analysis showed that protonated (cationic) form of the all the inhibitors are more strongly adsorbed on the metallic surface as compared to their neutral form.     

Electrochemical and Quantum Chemical Studies of Azoles as Corrosion Inhibitors for Mild Steel in Hydrochloric Acid

The inhibition effect of three azole compounds, 2-aminobenzimidazole(ABM), 2-aminothiazole(AT) and 2-aminobenzothiazole(ABT), on the corrosion of mild steel in a 1 mol/L HCl solution was investigated by means of potentiodynamic polarization measurement, electrochemical impedance spectroscopy(EIS) and scanning electron mi-croscopy(SEM). The correlation between inhibition efficiency and molecular structure of inhibitor was theoretically studied via quantum chemical calculations. The results show that the inhibition efficiency(η) of the inhibitors follows the order of η_ABT >η_AT >η_ABM. Moreover, ABM, AT and ABT belong to mixed-type inhibitors. The adsorption of the inhibitors on the steel surface follows the Langmuir adsorption isotherm, with both physisorption and chemisorption.     

Inhibition of CTAB on the Corrosion of Mild Steel in Hydrochloric Acid

The inhibition effect of cetyl trimethyl ammonium bromide (CTAB) on the corrosion of mild steel in 1.0 mol L^?1 hydrochloric acid (HCl) has been studied at different temperatures (25–60°C) by weight loss and potentiodynamic polarization methods. The results reveal that CTAB behaves as an effective inhibitor in 1.0 mol L^?1 HCl, and the inhibition efficiency increases with the inhibitor concentration. Polarization curves show that CTAB is a mixed-type inhibitor in hydrochloric acid. The results obtained from weight loss and polarizations are in good agreement. The effect of immersion time on corrosion inhibition has also been examined and is discussed. The adsorption of inhibitor on mild steel surface obeys the Langmuir adsorption isotherm equation. Thermodynamic parameters have been obtained by adsorption theory. The inhibition effect is satisfactorily explained by the parameters.     

Theoretical and experimental approach of inhibition effect by sulfamethoxazole on mild steel corrosion in 1‐M HCl

The inhibition effect of sulfamethoxazole on mild steel corrosion in 1‐M hydrochloric acid solution is investigated by electrochemical and quantum chemical measurements. Electrochemical polarization studies show that sulfamethoxazole acts as a mixed‐type corrosion inhibitor. The adsorption of the inhibitor on mild steel in 1‐M hydrochloric acid system is studied at different temperatures (303‐333 K). The adsorption of sulfamethoxazole on mild steel surface is an exothermic process and obeys the Temkin adsorption isotherm. Based on the potential of zero charge values and quantum chemical parameters, the mechanism of adsorption is proposed.     

Surface morphological and impedance spectroscopic studies on the interaction of polyethylene glycol (PEG) and polyvinyl pyrrolidone (PVP) with mild steel in acid solutions

The inhibition of mild steel corrosion in aerated acid mixture of 0.5 N H₂SO₄ and 0.5 N HCl solution was investigated using potentiodynamic polarization studies, linear polarization studies, electrochemical impedance spectroscopy, adsorption, and surface morphological studies. The effect of inhibitor concentration on corrosion rate, degree of surface coverage, adsorption kinetics, and surface morphology is investigated. The inhibition efficiency increased markedly with increase in additive concentration. The presence of PEG and PVP decreases the double-layer capacitance and increases the charge-transfer resistance. The inhibitor molecules first adsorb on the metal surface following a Langmuir adsorption isotherm. Both PEG and PVP offer good inhibition properties for mild steel and act as mixed-type inhibitors. Surface analysis by scanning electron microscopy (SEM) and atomic force microscopy (AFM) shows that PVP offers better protection than PEG.     

Effect of piperidones on hydrogen permeation and corrosion inhibition of mild steel in acidic solutions

The influence of 3-methyl-2,6-diphenyl piperidin-4-one (MDPO) and 2-phenyl decahydroquinoline-4-one (PDQO) synthesised in the laboratory on hydrogen permeation and corrosion inhibition of mild steel in 1N H₂SO₄ has been studied using weight loss and various electrochemical AC and DC corrosion-monitoring techniques. Both the compounds inhibit the corrosion of mild steel in H₂SO₄. Potentiodynamic polarisation studies clearly reveal that they behave predominantly as cathodic inhibitors. The extent of decrease in hydrogen permeation current through steel surfaces has been studied by the hydrogen electropermeation technique. Double layer capacitance (C _dl ) and charge transfer resistance (R _t ) values are derived from Nyquist plots obtained from AC impedance studies. The adsorption of these compounds on mild steel surfaces from H₂SO₄ obeys Temkin’s adsorption isotherm.