Improved thermosets obtained from cycloaliphatic epoxy resins and γ‐butyrolactone with lanthanide triflates as initiators. I. Study of curing by differential scanning calorimetry and Fourier transform infrared

3,4‐Epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate was cured with different proportions of γ‐butyrolactone with lanthanum, samarium, and ytterbium triflates as catalysts. The curing was studied with differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the epoxide, lactone, and intermediate spiroorthoester groups. The glass‐transition temperature of the crosslinked materials was high and increased when the proportion of lactone decreased. The kinetics were studied with DSC experiments and were analyzed with isoconversional procedures. The differences in the reactivities of the systems were related to the Lewis acidity of the lanthanide salt used as the initiator. An increase in the proportion of lactone produced an increase in the reaction rate. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2337‐2347, 2005     

Cationic copolymerization of diglycidyl ether of bisphenol A with phthalide or 3,3′‐diphtalide catalyzed by lanthanide triflates

Mixtures of the diglycidylether of bisphenol A (DGEBA) and phthalide (PT) or 3,3′‐diphthalide (DPT) were cured using ytterbium or lanthanum triflate as catalyst. The curing was studied by differential scanning calorimetry (DSC) and Fourier transform infrared in attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and quantify the evolution of the epoxide and lactone groups. The T_g of the crosslinked materials increased when the proportion of lactone in the curing mixture decreased. The kinetics was studied with DSC experiments and isoconversional procedures. The differences in the reactivity of the systems were related to the Lewis acidity of the lanthanide salt used as initiator. The increase in the proportion of lactone leads to an increase in the reaction rate. The shrinkage was determined from the densities before and after curing and its evolution was studied by thermomechanical analysis. The materials obtained were characterized by thermogravimetry and dynamic mechanical thermal analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1711–1721, 2006     

Reduction of the shrinkage of thermosets by the cationic curing of mixtures of diglycidyl ether of bisphenol A and 6,6‐dimethyl‐(4,8‐dioxaspiro[2.5]octane‐5,7‐dione)

Ytterbium and lanthanum triflates were used as initiators to cure mixtures of diglycidyl ether of bisphenol A and 6,6‐dimethyl‐(4,8‐dioxaspiro[2.5]octane‐5,7‐dione) in several proportions. The evolution of the epoxy and 6,6‐dimethyl‐(4,8‐dioxaspiro[2.5]octane‐5,7‐dione) bands during curing and the linear ester groups in the final materials were evaluated with Fourier transform infrared in the attenuated‐total‐reflection mode. The use of a conventional cationic initiator, boron trifluoride monoethylamine, was also studied to test the advantages of lanthanide triflates. The shrinkage after curing and the thermal degradability of the materials with variations in the comonomer ratio and the initiator were evaluated and related to the chemical structure of the final network. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6869–6879, 2006     

Influence of the addition of erbium and ytterbium triflates in the curing kinetics of a DGEBA/<Emphasis Type="Italic">o</Emphasis>-tolybiguanide powder mixture

Solid bisphenol-A epoxy resin (DGEBA) of medium molecular mass was cured using o-tolylbiguanide (TBG) as cross-linking agent. In order to improve the kinetics of the reactive system, two Lewis acid catalysts (erbium(III) and ytterbium(III) trifluoromethanesulfonates) were added in proportions of 1 phr. The kinetic study was performed by dynamic scanning calorimetry (DSC) and the complete kinetic triplet (E, A and g(α)) determined. The kinetic analysis was performed with an integral isoconversional procedure (model-free), and the kinetic model was determined by the Coats-Redfern method and through the compensation effect (IKR). All the systems followed the m=1.5/n=0.5 isothermal curing model simulated from non-isothermal experiments. The addition of a little proportion of ytterbium or erbium triflates accelerated the curing process. In order to extract further information about the role of the lanthanide triflates added to epoxy/TBG systems, the kinetic results were compared with our previous kinetic studies made on DGEBA/lanthanide triflates initiated systems.     

Optically Active Helical Lanthanide Complexes: Storable Chiral Lewis Acidic Catalysts for Enantioselective Diels–Alder Reaction of Siloxydienes

Lanthanide triflates and a series of hexadentate chiral ligand complexes were synthesized. X‐ray‐quality crystals were obtained from mixtures of the lanthanide complexes, which were helical in shape. The complexes showed Lewis acidity and catalyzed the enantioselective Diels–Alder reaction of electron‐rich siloxydienes. The complexes were stable enough to be stored at ambient temperature on a laboratory bench and retained their Lewis acidity even after a month.     

Copolymerization of diglycidyl ether of bisphenol A with γ‐butyrolactone catalyzed by ytterbium triflate: Shrinkage during curing

Diglycidyl ether of bisphenol A (DGEBA) was cured with γ‐butyrolactone (γ‐BL) with ytterbium triflate as a catalyst. The curing was studied with differential scanning calorimetry, Fourier transform infrared (FTIR), and thermomechanical analysis. FTIR studies confirmed that four elemental reactions took place during the curing process: the formation of a spiroorthoester (SOE) by the reaction of DGEBA with γ‐BL, the homopolymerization of SOE, the homopolymerization of DGEBA, and the copolymerization of SOE and DGEBA. Moderate proportions of γ‐BL produced materials with higher glass‐transition temperatures, and the curing occurred with lower shrinkage after gelation because of the polymerization of SOE, with near‐zero shrinkage during the final stages of the curing. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2794–2808, 2003     

Structural and phenomenological study on the cationic curing of mixtures of epoxy resin and 5,5‐dimethyl‐1,3‐dioxane‐2‐one

Ytterbium and lanthanum triflates were used as initiators to cure a mixture of diglycidylether of bisphenol A (DGEBA) and 5,5‐dimethyl‐1,3‐dioxane‐2‐one (DMTMC). The evolution of the curing was studied by differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the groups involved in the curing process. We observed the formation of a five‐membered cyclic carbonate, which remains unreacted at the chain ends because of an equilibrium process between the spiroortho carbonates that had formed as intermediate species and also the loss of CO₂, which was quantified by thermogravimetry. The kinetics were studied by DSC and analyzed by isoconversional procedures. Thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA) experiments were used to evaluate the properties of the thermosets obtained. The phenomenological changes that take place during curing were studied and represented in a time‐temperature‐transformation (TTT) diagram. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4546–4558, 2006     

Crosslinking study of mixtures of DGEBA and 1,3‐dioxan‐2‐one catalyzed by lanthanide triflates

Ytterbium and lanthanum triflates were used as catalysts to cure diglycidylether of bisphenol A with different proportions of 1,3‐dioxan‐2‐one. The curing was studied by differential scanning calorimetry (DSC) and Fourier transform infrared in the attenuated‐total‐reflection mode (FTIR/ATR). FTIR/ATR was used to monitor the competitive reactive processes and to quantify the evolution of the groups involved in the curing process. We observed the formation of a five‐membered cyclic carbonate that remains unreacted at the chain ends, because of an equilibrium process between the spiroorthocarbonates that had formed as intermediate species. The kinetics were studied by DSC experiments and analyzed with isoconversional procedures. The system catalyzed by ytterbium triflate had a higher curing rate. Thermogravimetric analysis and dynamic mechanical thermal analysis experiments were used to evaluate the properties of the materials obtained. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5799–5813, 2005     

Study on the effect of rare earth metal triflates as initiators in the cationic curing of DGEBA/γ-valerolactone mixtures and characterization of the thermosets obtained

The thermal cationic curing of mixtures in different proportions of diglycidylether of bisphenol A (DGEBA) with γ-valerolactone (γ-VL) initiated by scandium, ytterbium and lanthanum triflates or a conventional BF₃·MEA initiator was investigated. The non-isothermal differential scanning calorimetry (DSC) experiments at a controlled heating rate were used to evaluate the evolution of the reactive systems. BF₃·MEA and rare earth metal triflates initiated curing systems follow a different evolution. Among rare earth metal triflates tested, the scandium was the most active initiator. The phenomenological changes that take place during curing were studied and represented in a time-temperature-transformation (TTT) diagram. Some characteristics of the materials were also evaluated.     

New poly(ether‐ester) thermosets obtained by cationic curing of DGEBA and 7,7‐dimethyl‐6,8‐dioxaspiro[3.5] nonane‐5,9‐dione with several Lewis acids as initiators

Scandium, ytterbium, and lanthanum triflates and boron trifluoride monoethylamine were used as cationic initiators to cure a mixture 2:1 (mol/mol) of diglycidylether of bisphenol A (DGEBA) and 7,7‐dimethyl‐6,8‐dioxaspiro[3.5]nonane‐5,9‐dione (MCB). The evolution of the epoxy and lactone during curing and the linear ester groups in the final materials were evaluated by Fourier Transform Infrared in the attenuated‐total‐reflection mode. The kinetic parameters of the curing process were calculated from DSC analysis applying isoconversional procedures. The shrinkage on curing and the thermal degradability of the materials on varying the initiator used were evaluated. The expandable character of MCB was confirmed. The materials obtained were more degradable than conventional epoxy resins due to the tertiary ester groups incorporated in the network by copolymerization. © 2008 Wiley Periodicals, Inc J Polym Sci Part A: Polym Chem 46: 1229–1239, 2008     

Procedures conditioning the absorption/desorption behavior of cold‐cured epoxy resins

The absorption/desorption behavior of a commercial cold‐cured bisphenolic epoxy resin, subjected to different treatments prior to exposure to water, was analyzed. The epoxy system has been already used as both matrix and adhesive for the manufacture and application, respectively, of fiber reinforced polymers composites employed for rehabilitation procedures. The effects of different curing, conditioning, and storing conditions on the water absorption/desorption process taking place in the cured resin were evaluated. The different conditioning procedures used to dry the specimens before their exposure to water caused a different extent of physical aging and of curing on each system, influencing the amount and the rate of diffusion of the water molecules inside the specimens. Moreover, if the specimens are subjected to thermohygrometric cycles prior to immersion in water, the rate of diffusion and the amount of water also depends on the presence of water molecules inside the cured resins not easy to remove by any drying treatment. During all the hygrometric treatments performed, a deaging process took place. The kinetic of this deaging process for the not‐fully cured systems depends on the additional crosslinking taking place in the samples. The different procedures used to condition the specimens also affect the variations in glass transition temperature (T_g) of the cured systems during and after immersion in water. Finally, the different drying procedures employed proved to be not equally appropriate for cold‐cured epoxy resins. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1320–1336, 2008     

Fracture mechanism of liquid‐crystalline epoxy resin systems with different phase structures

A liquid‐crystalline epoxy resin was cured at two different temperatures. The phases of the cured systems clearly showed isotropic and nematic polydomain structures, which depended on the curing temperature. The fracture toughness of the systems was measured, and the fracture mechanism was investigated with polarized IR measurements. The nematic polydomain structure system showed considerably higher fracture toughness than the isotropic structure. Moreover, both systems exhibited a reorientation of the network chains near the fracture surface during the fracture process, and the region of the network reorientation in the nematic polydomain structure system was larger than that in the isotropic structure system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4044–4052, 2004     

Solid state NMR characterization of formation of poly(ϵ‐caprolactone)/maghnite nanocomposites by in situ polymerization

Results of multinuclear MAS NMR spectroscopy are reported for poly (ε‐caprolactone)/maghnite nanocomposite formation, with ε‐caprolactone in situ polymerized in the presence of maghnite, a proton exchanged montmorillonite clay. Exfoliated and intercalated materials with different maghnite loading in the range 3–15 wt % were investigated. ¹H NMR evidences Brønsted acid hydroxyl groups in the silicate layers and shows that their broad signal at 7.6 ppm present in the parent clay disappears in the nanocomposite material. ²⁷Al MAS NMR results show that beside the hexacoordinated aluminum signal, two additional peaks corresponding to two different tetrahedral Al sites are present in the clay framework. The NMR signal intensity of only one of them was found to be affected in the nanocomposites compared with the parent maghnite, suggesting that these specific aluminum sites are the reactive ones at the initial stages of the polymerization. However almost no changes occurred in the ²⁹Si NMR spectra, confirming that the polymer grafting, as indicated earlier by atomic force microscopy, took place on the aluminum tetracoordinated sites rather than on the silicon sites. A mechanism of maghnite surface catalyzed polymerization of ε‐caprolactone was proposed, involving Brønsted and Lewis acid sites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3060–3068, 2007     

Fluorescent probes for monitoring the pulsed‐laser‐induced photocuring of poly(urethane acrylate)‐based adhesives

Fluorescence spectroscopy was used to study the kinetics of polymerization of acrylic adhesive formulations exposed to a 355‐nm pulsed emission from an Nd‐YAG laser. Nine fluorescent probes were used for monitoring the laser curing, showing different sensitivities. In general, the fluorescence intensity emission increased as crosslinking occurred. In addition, solvatochromic fluorescent probes showed a blueshift in their emission. A relative method was applied for the evaluation of the polymerization rates in three different acrylic systems. Special features of pulsed‐laser‐induced polymerization were treated in detail, such as the influence of the laser pulse frequency and the incident laser beam intensity. The polymerization rate slowed down as the pulse repetition rate decreased. An inhibition period due to oxygen quenching was observed, and it was highly dependent on the laser repetition rate and the nature of the photoinitiator. The effect of the laser beam intensity on the kinetics of such fast reactions was studied. In general, increasing the laser energy improved the rate of polymerization. The degree of cure improved as the polymerization rate increased as a result of faster crosslinking, rather than relaxation volume kinetics. Moreover, a saturation rate effect occurred that depended on the photoinitiator. The different behaviors of the two photoinitiators in the curing of the same acrylic formulation was explained on the basis of primary radical termination. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1227–1238, 2004     

Syntheses of aliphatic polyesters catalyzed by lanthanide triflates

Polycondensations of 1,6‐hexane diol and sebacic acid were conducted in bulk with addition of a lanthanide triflate as acidic catalyst. With exception of promethium triflate all lanthanide triflates were studied. A particularly low molecular weight was obtained with neodym triflate and the best results with samarium triflate. With Sm(OTf)₃ weight average (M_w) values up to 65 kDa (uncorrected SEC data) were achieved after optimization of the reaction conditions. Comparison of these results with those obtained from bismuth, magnesium, and zinc triflates, on the one hand, and comparison with the acidities of all catalysts, on the other, indicates that the esterification mechanism involves complexation of monomer by metal ions. Preparation of multiblock copoly(ether ester)s failed due to insufficient incorporation of poly(tetrahydrofuran) diols. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 170–177, 2009     

Novel urethane/epoxy resin hybrid materials using a moisture‐curing system

Novel curing systems of a urethane/epoxy resin [diglycidyl ether of bisphenol A (DGEBA)] alloy using the moisture‐latent hardener ketimine (K‐systems) were investigated on the DGEBA‐rich side and were compared with aromatic diamine curing systems (A‐systems). Almost all the added DGEBA was separated from the polyurethane matrix and dispersed as 2–10‐μm‐diameter particles after curing in the A‐systems. Therefore, DGEBA did not act as a reinforcing agent for the polyurethane matrix. However, 50% of the added DGEBA was dispersed as particles with a diameter of 1–4 μm, and the other 50% was incorporated into the polyurethane matrix in the novel K‐systems. Therefore, the polyurethane matrix in the K‐systems should be reinforced effectively by both incorporated and finely dispersed DGEBA and should result in significant improvements in the stress–strain properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1137–1144, 2004     

Advanced flame‐retardant epoxy resins from phosphorus‐containing diol

Phosphorus‐containing epoxy systems were prepared from isobutylbis(hydroxypropyl)phosphine oxide (IHPO) and diglycidyl ether of bisphenol A (DGEBA). Diethyl‐N,N‐bis(2‐hydroxyethyl) aminomethyl phosphonate (Fyrol 6) could not be incorporated into the epoxy backbone by a reaction with either epichlorohydrin or DGEBA because intramolecular cyclization took place. The curing behavior of the IHPO–DGEBA prepolymer with two primary amines was studied, and materials with moderate glass‐transition temperatures were obtained. V‐0 materials were obtained when the resins were tested for ignition resistance with the UL‐94 test. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3510–3515, 2005     

Ytterbium(III) triflate: An efficient and simple catalyst for isomerization of 2′‐hydroxychalcone and 2′‐aminochalcones in ionic liquid

Isomerization of 2′‐hydroxychalcone and 2′‐aminochalcone have been investigated using ytterbium(III) trifluromethanesulfonate {Yb(OTf)₃} (30 mol %) as Lewis acid catalyst in [bmim][BF₄] ionic liquid. The effect of different metal triflates as Lewis acid, catalyst loading and reaction media was studied for this isomerization reaction. Advantages of the methodology include short reaction time, excellent yields, catalytic use of Lewis acid, and recovery and reuse of the catalyst. J. Heterocyclic Chem., (2011).     

Infrared thermography analysis of the thermally latent polymerization of 3‐ethyl‐3‐phenoxymethyloxetane

Infrared thermography was employed to analyze multiple batches of the thermally latent polymerization of 3‐ethyl‐3‐phenoxymethyloxetane at once. The temperature changes in the polymerization depended on the polymerization rates. That is, a fast polymerization was exothermic, increasing the temporal temperature of the polymerization by approximately 130 °C within a few minutes. Infrared thermography, which can analyze multiple samples instantaneously, proved effective as a screening method for thermally latent curing systems. Exothermicity in the crosslinking polymerization of 1,4‐bis(3‐ethyloxetanylmethoxy)benzene was also analyzed by infrared thermography. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5519–5524, 2006     

Green Chemistry and Glycochemistry

With the increasing environmental concerns and the regulatory constraints faced in the chemical and pharmaceutical industries, development of environmentally benign organic reactions (also called Green Chemistry) has become a crucial and demanding research area in modem organic chemical research. Our contribution to this rapidly growing field involves use of certain lanthanide salts such as lanthanide(Ⅲ) trifluoromethanesulfonates as stable Lewis acids in protic solvent such as water or alcohols to catalyze a variety of organic transformations under nearly neutral conditions. This benign approach has the potential to replace many traditional reaction systems which are either conducted in strong acidic conditions or in environmentally less-friendly solvents. For example, aza Diels-Alder (DA) reaction in aqueous solution conveniently combines three reactant components (an aldehyde, an amine salt and a diene) in aqueous solution and generates nitrogen-containing heterocyclic products. However, this reaction is limited to either the smallest aldehyde or activated aldehydes such as glyoxylates. We have found that lanthanide(Ⅲ) triflates catalyze the aza DA reactions of a larger,inactivated aldehyde and an amine hydrochloride with a diene in aqueous solution[1]. Other examples of application of lanthanide triflates in protic solvents include Chicliibabin pyridine synthesis[2],condensation of indoles with aldehydes or ketones[3], and use of ion-exchange resin supported lanthanide catalysts[4].