Metatungstate and tungstoniobate-containing LDHs: Preparation, characterisation and activity in epoxidation of cyclooctene

Polyoxometalates (POMs) H₂W₁₂O₄₀⁶⁻ and W₄Nb₂O₁₉⁴⁻ have been intercalated between the brucite-like layers of Mg, Al and Zn, Al hydrotalcites by anion exchange, starting from the corresponding nitrate precursors. The solids have been characterised by Powder X-ray Diffraction (PXRD), Fourier Transform infrared (FT-IR) spectroscopy, N₂ adsorption-desorption at −196 °C and thermogravimetric (TG) and differential thermal analyses (DTA), and have been tested in the epoxidation of cyclooctene using H₂O₂ or t-BuOOH as oxidants. The results show that both anions are effectively located in the interlayer space maintaining their pristine structures without depolymerisation. Upon intercalation of such large anions microporosity is developed and subsequently an increase in the specific surface areas is also observed. In general, the prepared materials possess catalase and epoxidation activity, with ZnAl-intercalated H₂W₁₂O₄₀⁶⁻ giving the best results in terms of epoxide yield (17% at 24 h). Product selectivity is different for the intercalated and free POMs, the latter yielding 1,2-cyclooctanediol as the only product, whereas the former produces only the epoxide. The epoxidation reaction seems to be catalysed in homogeneous phase by the POM.     

Growth and characterization of two new NLO materials from the amino acid family: l-Histidine nitrate and l-Cysteine tartrate monohydrate

Single crystals of organic nonlinear optical (NLO) materials l-Histidine nitrate (C₆H₁₀N₃O₂)⁺ · (NO₃)⁻ and l-Cysteine tartrate monohydrate (C₃H₈NO₂S)⁺ · (C₄H₅O₆)⁻ · H₂O were grown by submerged seed solution method. Characterization of the crystals was made using single crystal X-ray diffraction. Fourier transform infrared (FTIR) spectroscopic studies, optical behaviour such as UV-visible-NIR absorption spectra and second harmonic generation (SHG) conversion efficiency were investigated to explore the NLO characteristics of the above materials. Microhardness measurements and dielectric studies of the compounds were also carried out.     

Evaluation of ionic conductivity for Mg–Al layered double hydroxide intercalated with inorganic anions

This study demonstrates that humidity, temperature, and the interlayer anions influence ionic conductivities of Mg–Al layered double hydroxides (LDHs) intercalated with inorganic anions. Results show that Mg–Al LDH intercalated with Br^? exhibited the highest ionic conductivity among Mg–Al LDHs intercalated with CO₃^2?, Cl^?, Br^?, NO₃^? and SO₄^2?. Its ionic conductivity was 1.1 × 10^? 2 S cm^? 1 at 80 °C under 80% relative humidity. The electromotive force for the hydroxide ion concentration cell using Mg?Al CO₃^2? LDH showed the same behavior with that using an anion exchange membrane, indicating that Mg–Al CO₃^2? LDH can be a hydroxide ion conductor.     

Influence of nature of precursors on the formation and structure of Cu-Ni-Cr mixed oxides from layered double hydroxides

Analogous layered double hydroxides (LDHs) with the Cu²⁺/Ni²⁺/Cr³⁺ molar ratio of 1/2/1 on the brucite-like layers and interlayer anions (viz sulfate, nitrate and carbonate, respectively) were synthesized by a coprecipitation method. For the first time, the effects of interlayer anions on the structural properties of as-synthesized LDHs and resulting calcined products at 773 K were investigated by means of powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), simultaneous thermogravimetric and differential thermal analysis (TG-DTA), X-ray photoelectron spectroscopy (XPS) and temperature programmed reduction (TPR). The results indicate that the nature of interlayer anions involved within the hydrotalcite (HT)-like structure has a larger influence on the thermal stability of LDHs precursors. Calcination of well-crystallized LDHs leads to the formation of mixed metal oxides including CuO, NiO and Cu²⁺-, Ni²⁺- and Cr³⁺-containing spinel phases, the composition distributions of which obtained from LDHs precursors depend on the nature of interlayer anions, thus resulting in the difference of the reducibility of reducible metal species in the calcined LDHs. Moreover, the surface basicity of the calcined material, which is related to the different behaviour of LDHs precursors during the thermal decomposition depending on the interlayer anions, increases progressively following the order of calcined LDHs from sulfate to nitrate and carbonate.     

Temperature and pressure effects on formation and decomposition of phenylvinylperoxy radicals in the C6H5C2H2 + O2 reaction

The effects of temperature and pressure on the formation and decomposition of C₆H₅C₂H₂O₂ in the C₆H₅C₂H₂ + O₂ reaction have been investigated at temperatures from 298 to 378 K by directly monitoring the C₆H₅C₂H₂O₂ radical in the visible region by cavity ringdown spectrometry (CRDS). The rate constant for the C₆H₅C₂H₂ + O₂ association and that for fragmentation of C₆H₅C₂H₂O₂ were found to be k₁ (C₆H₅C₂H₂ + O₂ → C₆H₅C₂H₂O₂) = (3.20 ± 1.19) × 10¹¹ exp(+760/T) cm³ mol⁻¹ s⁻¹ and k₂ (C₆H₅C₂H₂ O₂ → C₆H₅CHO + HCO) = (1.68 ± 0.13) × 10⁴ s⁻¹, respectively. Additional kinetic measurements by pulsed laser photolysis/mass spectrometry show that C₆H₅CHO was produced in the C₆H₅C₂H₂ + O₂ reaction as predicted and the formation of C₆H₅CHO from the decomposition of C₆H₅C₂H₂O₂ is temperature-independent, consistent with the CRDS experimental data.     

Dissociative photoionization of l-menthone: An experimental and theoretical study

The dissociative photoionization mechanism of l-menthone has been investigated with photoionization mass spectrometry using synchrotron radiation. The adiabatic ionization energy (IE) of l-menthone and the appearance energies (AE) of its major fragment ions C₉H₁₅O⁺, C₉H₁₇⁺, C₈H₁₆⁺, C₇H₁₁O⁺, C₆H₁₀O⁺, C₆H₉O⁺, C₅H₈O⁺, C₅H₁₀⁺, C₄H₆O⁺, C₅H₉⁺, C₄H₈⁺, C₄H₇⁺, C₃H₇⁺, C₃H₆⁺, C₂H₂O⁺, and CH₃⁺ are determined with their photoionization efficiency (PIE) spectra in the photon energy region of ∼8−15.5 eV. Breakdown diagrams identifying the major products are presented. Dissociative photoionization channels for formation of these fragment ions are proposed based on comparison of determined experimental appearance energies and energies predicted with the DFT calculations. According to our results, the experimental dissociation energies are in fair agreement with the theoretical values of the possible photodissociation channels of C₁₀H₁₈O.     

Energy transfer and upconversion luminescence in Tm/Yb co-doped lanthanum-zinc-lead-tellurite glasses

A series of Tm³⁺/Yb³⁺ co-doped lanthanum-zinc-lead-tellurite (TPZL) glasses pumped by a 980 nm laser diode (LD) were demonstrated to obtain a high efficiency of infrared-to-visible upconversion. Effects of PbO content on the thermal stability, structure and upconversion properties of Tm³⁺/Yb³⁺ co-doped TPZL glasses had been investigated. The efficient visible upconversion fluorescences corresponding to the ¹G₄→³H₆, ¹G₄→³F₄ and ³H₄→³H₆ transitions of Tm³⁺ were observed under 980 nm excitation. The upconversion intensities of blue, red and near infrared emissions in Tm³⁺/Yb³⁺ co-doped TPZL glasses were obviously enhanced with increasing PbO content. The dependence of upconversion intensities on excitation power and the possible upconversion mechanisms had been evaluated by a proper rate equation model. Population density in different levels and coefficients of the energy transfer rate C_Di (i=2, 4, 6) between Tm³⁺ and Yb³⁺ were estimated by fitting the simulated curves to the measured ones. The obtained three energy transfer coefficients C_D2, C_D4, and C_D6 were determined to be 5.7×10⁻¹⁷, 1.3×10⁻¹⁶ and 8.6×10⁻¹⁷ cm³/s, respectively.     

Preparation of organic acid anion-modified magnesium hydroxides by coprecipitation: A novel material for the uptake of heavy metal ions from aqueous solutions

New layered magnesium hydroxides whose brucite layers had been bridged with malate²⁻ and tartrate²⁻ were prepared by dropwise addition of Mg(NO₃)₂ to malate and tartrate solutions at a constant pH of 10.5. Malate²⁻ and tartrate²⁻ may have been also absorbed on the surfaces of hydroxides. In the case of using citrate solution, Mg(OH)₂ absorbed with citrate³⁻ was produced. These materials were found to take up Cu²⁺ rapidly from an aqueous solution at pH 5.0. Copper uptake by precipitates is attributed to the formation of chelate complexes of Cu²⁺ with citrate³⁻, malate²⁻, and tartrate²⁻.     

Micromechanical and thermal behaviour of gel grown pure- and sodium-modified copper tartrate crystals

Results regarding micromechanical characteristics of gel grown pure- and sodium-modified copper tartrate crystals, bearing composition CuC₄H₄O₆·3H₂O, (Cu)_0.77(Na)_0.23C₄H₄O₆·3H₂O and (Cu)_0.65(Na)_0.35C₄H₄O₆·H₂O, as obtained on using indentation induced hardness testing technique are reported. Thermal behaviour of these crystals in the temperature ranging from room temperature (∼25 °C) to about 600 °C is also reported. Pure copper tartrate crystals are found to be thermally more stable than the sodium-modified ones. Dependence of Vickers’ hardness number H_v on load ranging from 0.049 to 2.94 N on two different planes for all the three compositions is analyzed. It is shown that after initial rise in the value of H_v, the same achieves saturation at a load of 0.49 N. Modification of copper tartrate crystal by introducing sodium in its lattice brings about a change in the micromechanical characteristics. The saturation value of H_v decreases with increase in the concentration of sodium ions. The results on (0 0 1) and (1 1 1) planes for both pure and modified copper tartrate crystals suggest hardness anisotropy. Relative difference of hardness between the two planes and yield strength for both pure and modified copper tartrate crystals is worked out. The experimental results are analyzed for applicability of Meyer’s law and Proportional Specimen Resistance Model. It is suggested that the experimental results indicating reverse ISE phenomenon may be explained in terms of the existence of a distorted zone near the crystal-medium interface. The integral method of Coats and Redfern approximation applied to the thermoanalytical data suggests “Random Nucleation Model” for the reaction kinetics of these crystals. Non-isothermal kinetic parameters such as activation energy, frequency factor and order of reaction are calculated.     

Reactivity and XAFS study on (1−x)CeO2-xNiO (x=0.025-0.3) system in the two-step water-splitting reaction for solar H2 production

The redox reaction of Ce⁴⁺-Ce³⁺ promoted by the catalytic function of nickel ions in a (1−x)CeO₂-xNiO solid solution was investigated for solar H₂ production by the two-step water-splitting reaction. By irradiation using an infrared imaging lamp as a solar simulator, the O₂-releasing reaction with (1−x)CeO₂-xNiO solid solution proceeded at 1673-1873 K, and its reduced form was produced. The amounts of H₂ gas evolved by the reduced form were 1.2-2.5 cm³/g and the evolved gases amounts ratio of H₂/O₂ was nearly 2, which is equal to the stoichiometric value of the water-splitting reaction (H₂O=H₂+1/2O₂). The maximum amounts of evolved H₂ and O₂ gases were obtained at the Ce:Ni mole ratio of 0.95:0.05 (x=0.05) in the (1−x)CeO₂-xNiO system. The X-ray absorption fine structure (XAFS) measurement showed that the O₂-releasing and H₂-generation reactions with (1−x)CeO₂-xNiO solid solution were repeatable with the redox system of Ce⁴⁺-Ce³⁺, which was enhanced by the catalytic function of Ni²⁺-Ni⁰.     

Pressure broadening and collisional shift of the Rb D2 absorption line by CH4, C2H6, C3H8, n-C4H10, and He

The pressure broadening and shift rates of the rubidium D2 absorption line 5²S_1/2→5²P_3/2 (780.24 nm) with CH₄, C₂H₆, C₃H₈, n-C₄H₁₀, and He were measured for pressures ≤80 Torr using high-resolution laser spectroscopy. The broadening rates γ_B for CH₄, C₂H₆, C₃H₈, n-C₄H₁₀, and He are 28.0, 28.1, 30.5, 31.3, and 20.3 (MHz/Torr), respectively. The corresponding shift rates γ_S are −8.4, −8.8, −9.7, −10.0, and 0.39 (MHz/Torr), respectively. The measured rates of Rb for the hydrocarbon buffer gas series of this study are also compared to the theoretically calculated rates of a purely attractive van der Waals difference potential. Good agreement is found to exist between measured and theoretical rates.     

Photoluminescence properties of Sm in LBTAF glasses

Room temperature visible and near infrared optical absorption and emission spectra of Sm³⁺-doped lead borate titanate aluminum fluoride (LBTAF) glasses with molar composition (50−x) PbO−30H₃BO₃−10TiO₂−10AlF₃−xSm₂O₃ (x=0.1, 0.5, 1.0 and 2.0) have been analyzed. Energy parameters for the 4f⁵ electronic configuration of Sm³⁺: LBTAF glasses have been evaluated using free-ion Hamiltonian model. The experimental oscillator strengths of absorption bands have been used to determine the J-O parameters. Fluorescence spectra were recorded by exciting the samples with 402 nm. Using the J-O parameters and luminescence data, the radiative transition probabilities (A_R), branching ratios (β_R) and stimulated emission cross-sections (σ_e) were obtained. The decay curves of ⁴G_5/2→⁶H_7/2 transition exhibit single exponential for lower concentration (0.1 mol%) and non-exponential for higher concentrations. This concentration quenching has been attributed to the energy transfer through cross-relaxation between Sm³⁺ ions. From the values of the radiative parameters, it is concluded that 1.0 mol% Sm³⁺-doped LBTAF glass may be used for laser active medium with emission wavelength at 600 nm.     

Investigation of energy transfer and frequency upconversion in Ho/Yb co-doped tellurite glasses

A serials of Ho³⁺/Yb³⁺ co-doped tellurite glasses by pumping 970 nm laser diode (LD) were demonstrated to obtain a high efficiency of infrared-to-visible upconversion. Two intense emission bands were observed in Ho³⁺/Yb³⁺ co-doped tellurite glasses centered at 549 and 664 nm corresponding to Ho³⁺: ⁵S₂(⁵F₄)→⁵I₈ and ⁵F₅→⁵I₈ transitions, respectively. The upconversion intensities of red and green emissions in Ho³⁺/Yb³⁺ co-doped glasses were enhanced largely when increasing Yb₂O₃ content. The dependence of upconversion intensities on excitation power and the possible upconversion mechanisms had been evaluated by a proper rate equation model. The energy transfer coefficients were estimated by fitting the simulated curves to the measured ones. The obtained three energy transfer coefficients C_D2, C_D3 and C_D4 were C_D2=5.0×10⁻¹⁸ cm³/s, C_D3=1.5×10⁻¹⁷ cm³/s, C_D4=9.0×10⁻¹⁷ cm³/s.     

Effect of anions on the phase stability of γ-FeOOH nanoparticles and the magnetic properties of gamma-ferric oxide derived from lepidocrocite

The effect of anions such as Cl⁻, SO₄²⁻, and HPO₄²⁻ on the phase stability of FeOOH (α or γ) during precipitation is investigated. Oxidation of Fe(OH)₂·xH₂O from FeCl₂ solution with high Cl⁻ concentration ([Cl⁻]/[Fe]=R_Cl≥8) or (NH₄)₂Fe(SO₄)₂ (FAS) with [HPO₄²⁻]/[Fe]=R_P≥0.02 yields phase-pure γ-FeOOH. In the medium ranges of R_Cl and R_P, mixed phases of α-FeOOH and γ-FeOOH are obtained. Replacement of OH⁻ by Cl⁻ with the bridging cations or strongly bonded HPO₄²⁻ ions in the matrix of the intermediate phase (Fe_x²⁺Fe_y³⁺(OH)_2x+2y−nz·xH₂O(A)_zⁿ⁻, where A is anions such as Cl⁻, SO₄²⁻, HPO₄²⁻, etc.), promoted the lower density γ-FeOOH. However, the particles are less developed and have poor crystallinity as evidenced from transmission electron microscope and thermogravimetry-differential thermal analysis of the precipitates. Whereas, monophasic, uniformly sized, nano-lath shaped particles with high aspect ratio >10 are obtained when morphology-controlling cation additives such as Pt⁴⁺, Pd²⁺ or Rh³⁺ are present in FeCl₂ (R_Cl≥8) solution. Preferential adsorption of additives on (0k0) and (h00) planes limits the growth in the perpendicular directions leading to high aspect ratios. The effect of these additives are suppressed by the phosphate ion, a strong complexing ligand, giving rise to fibrous aggregate with the length of individual particles as small as 10-30 nm. While most of the Cl⁻ ion is removed from the final precipitates on washing, phosphate remained as HPO₄²⁻ as evidenced from IR absorption spectra. Maghemite obtained by dehydroxylating γ-FeOOH contains randomly distributed micropores bringing in the relaxation effects of spins on the surface atoms as deciphered from Mössbauer spectroscopy. This leads to the low σ_s (44-48 emu/g) and H_c (120-130 Oe) for γ-Fe₂O_3−δ particles. Whereas nearly pore-free single crystalline particles obtained by reduction followed by reoxidation has high value of σ_s (73 emu/g) and H_c (320 Oe), which decreases to 30 emu/g and 75 Oe, respectively, for nanoparticles obtained from phosphate stabilized lepidocrocite. The mobility of iron ions and counter mobility of vacancies during the topotactic transformation of γ-FeOOH to magnetite to γ-Fe₂O_3−δ renders the particles pore-free.     

Control of luminescence and conductivity of delafossite-type CuYO2 by substitution of rare earth cation (Eu, Tb) and/or Ca cation for Y cation

Delafossite-type oxides of CuTb_yY_1−yO₂, CuEu_yY_1−yO₂, CuCa_xTb_yY_1−x−yO₂ and CuCa_xEu_yY_1−x−yO₂ have been prepared by solid state reactions. The lattice-parameter dependence on the composition implies substitution of the Tb³⁺, Eu³⁺ and Ca²⁺ cations for the Y³⁺ site. Noticeable sharp emission lines due to the f-f transitions (⁵D₄→⁷F_J, J=3-6) of Tb³⁺ or due to the f-f transitions (⁵D₀→⁷F_J, J=0-4) of Eu³⁺ are observed at room temperature. Electrical conductivities of CuCa_xTb_yY_1−x−yO₂ and CuCa_xEu_yY_1−x−yO₂ are larger than those of CuTb_yY_1−yO₂ and CuEu_yY_1−yO₂, indicating the increase of the hole concentration caused by the substitution of Ca²⁺ for the Y³⁺ site. These results indicate the controllability of the luminescence and conductivity in CuCa_xTb_yY_1−x−yO₂ and CuCa_xEu_yY_1−x−yO₂ delafossite-type oxides by simultaneous substitution of the rare earth Tb³⁺ or Eu³⁺ cation and the Ca²⁺ cation for the Y³⁺ site.     

Vibrational study,phase transitions and electrical properties of 4-benzylpyridinium monohydrogenselenate

The title compound C₆H₅CH₂C₅H₄NH⁺·HSeO₄⁻ crystallizes in the orthorhombic system with the space group Pbca and the following unit cell dimensions: a=27.449(5) Å; b=10.821(6) Å and c=8.830(1) Å.The structure consists of infinite parallel two-dimensional planes built of HSeO₄⁻ anions and C₆H₅CH₂C₅H₄NH⁺ cations mutually.Differential scanning calorimetry study on 4-benzylpyridinium monohydrogen-selenate was carried out. A high temperature second order phase transition at 363 K was found and characterized by electric measurements. The Raman of polycrystalline sample has been recorded at different temperature between 297 and 373 K.The conductivity relaxation parameters associated with some H⁺ conduction have been determined from an analysis of the M′′/M′′_max spectrum measured in a wide temperature range. An appearance of the superionic phase transition in 4-BSe is closely related to a liberation or even a rotation increase of HSeO₄⁻ groups with heating.     

Photophysical Properties of New Terbium (III) Organophosphonates

This paper reports on the synthesis, characterization and photophysical properties of the Tb³⁺ organophosphonates, TbH(O₃PR)₂, methylphosphonate (R=CH₃), ethylphosphonate (R=C₂H₅), propylphosphonate (R=C₃H₇), and phenylphosphonate (R=C₆H₅). The layered Tb³⁺ organophosphonates were characterized by X-ray diffraction, IR spectroscopy, TG and elemental analysis. The interlayer distances of the Tb³⁺ organophosphonates evaluated by the X-ray diffractogram were 9.50 Å for TbH(O₃PCH₃)₂, 12.18 Å for TbH(O₃PC₂H₅)₂, 14.84 Å for TbH(O₃PC₃H₇)₂ and 15.20 Å for TbH(O₃PC₆H₅)₂. The Tb³⁺ luminescence data revealed highly green emissive materials when they were excited at 368 nm, where the characteristic ⁵D₄ → ⁷F _J (J=6, 5, 4 and 3) transitions of Tb³⁺ were observed at 488, 543, 585 and 619 nm, respectively. The lifetime of the Tb^{3+ 5}D₄ → ⁷F₅ transition (λ_exc=368 nm and λ_em=543 nm) for the Tb³⁺ organophosphonates was evaluated from the decay curves, which values were of 2.88, 2.22, 2.14 and 2.59 ms, respectively for TbH(O₃PCH₃)₂, TbH(O₃PC₂H₅)₂, TbH(O₃PC₃H₇)₂ and TbH(O₃PC₆H₅)₂. TG analysis revealed that these materials are thermally highly stable, with no water molecule in their composition, which makes them potential luminophores.     

Synthesis,characterization and electrochemical study of layered double hydroxides intercalated with 2-thiophenecarboxylate anions

The synthesis, characterization, and electrochemical study of the Zn(II)–Al(III) and Zn(II)–Cr(III) Layered Double Hydroxides (LDHs) containing 2-thiopenecarboxylate as the interlayer anions are described. The LDHs were prepared by the constant pH coprecipitation technique followed by hydrothermal treatment for 72 h. The materials were analyzed by PXRD, FT-IR, ¹³C CP-MAS, EDX, TEM, and CV. The presence of the organic heterocyclic anions was confirmed by FT-IR and the related solid-state ¹³C NMR data strongly suggested that these were dimerised during coprecipitation. Accordingly, the basal spacing found by the X-ray technique was ∼15.3 Å, a distance coincident with the formation of bilayers of the intercalated anions. The structural organization of all the new materials was greatly enhanced by hydrothermal treatment, as shown by PXRD. The improved organization of the bilayered structures had a strong influence in the electrochemical behaviour of clay-modified electrodes produced with these materials, such as the diminished resistance to the ionic flow through the LDHs films.     

Infrared-to-red upconversion luminescence in samarium-doped antimony glasses

A new antimony-based glass system (K₂O-B₂O₃-Sb₂O₃) having low phonon energy (about 600 cm⁻¹) doped with Sm³⁺ ions has been developed. Infrared reflection spectroscopic (IRRS) studies have been employed to establish its low phonon energy. Ultraviolet-Visible-near infrared (UV-Vis-NIR) absorption and photoluminescence upconversion properties with the spectrochemistry of the 15K₂O-15B₂O₃-70Sb₂O₃ (mol%) glasses have been studied doping with different concentrations (0.1-1.0 wt%) of Sm₂O₃. UV-Vis-NIR absorption band positions have been justified with quantitative calculation of nephelauxetic parameter and covalent bonding characteristics of the host. NIR to visible upconversion has been investigated by exciting at 949 nm at room temperature. Three upconverted bands originating from the ⁴G_5/2→⁶H_5/2, ⁴G_5/2→⁶H_7/2 and ⁴G_5/2→⁶H_9/2 transitions are found to be centered at 566 (green, weak), 602 (orange, weak) and 636 (red, remarkably strong) nm, respectively. These bands have been explained from the evaluation of the absorption, normal (downconversion) fluorescence and excitation spectra. The upconversion processes have been explained by the excited state absorption (ESA), energy transfer (ET) and cross-relaxation (CR) mechanisms involving population of the metastable (storage) energy level (⁴G_5/2) by multiphonon deexcitation effect. It is evident from the IRRS study that the upconversion phenomena are expedited by the low multiphonon relaxation rate in antimony glasses owing to their low phonon energy (602 cm⁻¹, the main and highest intensity Sb-O-Sb stretching band) which is very close to that of fluoride glasses (500-600 cm⁻¹).     

Effect of boric acid on structure,morphology and luminescent properties of divalent europium doped calcium aluminate phosphors

Blue phosphors Ca_1 − xAl₂O₄: xEu²⁺ were prepared by high temperature solid-state method. Their structure, morphology and luminescent properties were investigated by X-ray diffraction (XRD), scanning electron microscope (SEM) and fluorescence spectroscopy. The effect of different amounts of fluxing agent H₃BO₃ on structure, morphology and luminescent properties of blue phosphors Ca_1 − xAl₂O₄: xEu²⁺ luminous intensity caused by different amount of H₃BO₃ was also investigated. The amount of H₃BO₃ doped Ca_1 − xAl₂O₄: xEu²⁺ in optimal luminous intensity had been determined. The results showed that both the excitation and emission spectra of samples were all broad bands, and that the peak of emission spectra was near 442 nm, which was corresponding to the 4f⁶5d → 4f⁷ transition of Eu²⁺ illuminating blue light. Ca_1 − xAl₂O₄: xEu²⁺ (x = 3.5 mol%) could be gained with good morphology and the best luminous intensity when H₃BO₃ mass ratio was 0.5 wt%.