Cobalt‐Catalyzed Oxidative C−H/C−H Cross‐Coupling between Two Heteroarenes

The first example of cobalt‐catalyzed oxidative C?H/C?H cross‐coupling between two heteroarenes is reported, which exhibits a broad substrate scope and a high tolerance level for sensitive functional groups. When the amount of Co(OAc)₂?4 H₂O is reduced from 6.0 to 0.5 mol %, an excellent yield is still obtained at an elevated temperature with a prolonged reaction time. The method can be extended to the reaction between an arene and a heteroarene. It is worth noting that the Ag₂CO₃ oxidant is renewable. Preliminary mechanistic studies by radical trapping experiments, hydrogen/deuterium exchange experiments, kinetic isotope effect, electron paramagnetic resonance (EPR), and high resolution mass spectrometry (HRMS) suggest that a single electron transfer (SET) pathway is operative, which is distinctly different from the dual C?H bond activation pathway that the well‐described oxidative C?H/C?H cross‐coupling reactions between two heteroarenes typically undergo.     

Cooperative Lewis Acid/Cp*CoIII Catalyzed C−H Bond Activation for the Synthesis of Isoquinolin‐3‐ones

A facile route toward the synthesis of isoquinolin‐3‐ones through a cooperative B(C₆F₅)₃‐ and Cp*Co^III‐catalyzed C?H bond activation of imines with diazo compounds is presented. The inclusion of a catalytic amount of B(C₆F₅)₃ results in a highly efficient reaction, thus enabling unstable NH imines to serve as substrates.     

Boron‐Based Catalysts for C−C Bond‐Formation Reactions

Because the construction of the C?C bond is one of the most significant reactions in organic chemistry, the development of an efficient strategy has attracted much attention throughout the synthetic community. Among various protocols to form C?C bonds, organoboron compounds are not just limited to stoichiometric reagents, but have also made great achievements as catalysts because of the easy modification of the electronic and steric impacts on the boron center. This review presents recent developments of boron‐based catalysts applied in the field of C?C bond‐formation reactions, which are classified into four kinds on the basis of the type of boron catalyst: 1) highly Lewis acidic borane, B(C₆F₅)₃; 2) organoboron acids, RB(OH)₂, and their ester derivatives; 3) borenium ions, (R₂BL)X; and 4) other miscellaneous kinds.     

Oxidative C−H/C−H Cross‐Coupling Reactions between N‐Acylanilines and Benzamides Enabled by a Cp*‐Free RhCl3/TFA Catalytic System

By making use of a dual‐chelation‐assisted strategy, a completely regiocontrolled oxidative C?H/C?H cross‐coupling reaction between an N‐acylaniline and a benzamide has been accomplished for the first time. This process constitutes a step‐economic and highly efficient pathway to 2‐amino‐2′‐carboxybiaryl scaffolds from readily available substrates. A Cp*‐free RhCl₃/TFA catalytic system was developed to replace the [Cp*RhCl₂]₂/AgSbF₆ system generally used in oxidative C?H/C?H cross‐coupling reactions between two (hetero)arenes (Cp*=pentamethylcyclopentadienyl, TFA=trifluoroacetic acid). The RhCl₃/TFA system avoids the use of the expensive Cp* ligand and AgSbF₆. As an illustrative example, the procedure developed herein greatly streamlines the total synthesis of the naturally occurring benzo[c]phenanthridine alkaloid oxynitidine, which was accomplished in excellent overall yield.     

Diversification of ortho‐Fused Cycloocta‐2,5‐dien‐1‐one Cores and Eight‐ to Six‐Ring Conversion by σ Bond C−C Cleavage

Sequential treatment of 2‐C₆H₄Br(CHO) with LiC≡CR¹ (R¹=SiMe₃, tBu), nBuLi, CuBr?SMe₂ and HC≡CCHClR² [R²=Ph, 4‐CF₃Ph, 3‐CNPh, 4‐(MeO₂C)Ph] at ?50 °C leads to formation of an intermediate carbanion (Z)‐1,2‐C₆H₄{C_A(=O)C≡C_BR¹}{CH=CH(CH^?)R²} ( 4 ). Low temperatures (?50 °C) favour attack at C_B leading to kinetic formation of 6,8‐bicycles containing non‐classical C‐carbanion enolates ( 5 ). Higher temperatures (?10 °C to ambient) and electron‐deficient R² favour retro σ‐bond C?C cleavage regenerating 4 , which subsequently closes on C_A providing 6,6‐bicyclic alkoxides ( 6 ). Computational modelling (CBS‐QB3) indicated that both pathways are viable and of similar energies. Reaction of 6 with H⁺ gave 1,2‐dihydronaphthalen‐1‐ols, or under dehydrating conditions, 2‐aryl‐1‐alkynylnaphthlenes. Enolates 5 react in situ with: H₂O, D₂O, I₂, allylbromide, S₂Me₂, CO₂ and lead to the expected C ‐E derivatives (E=H, D, I, allyl, SMe, CO₂H) in 49–64 % yield directly from intermediate 5 . The parents (E=H; R¹=SiMe₃, tBu; R²=Ph) are versatile starting materials for NaBH₄ and Grignard C=O additions, desilylation (when R¹=SiMe) and oxime formation. The latter allows formation of 6,9‐bicyclics via Beckmann rearrangement. The 6,8‐ring iodides are suitable Suzuki precursors for Pd‐catalysed C?C coupling (81–87 %), whereas the carboxylic acids readily form amides under T3P® conditions (71–95 %).     

Cobalt(III)‐Catalyzed Intramolecular Cross‐Dehydrogenative C−H/X−H Coupling: Efficient Synthesis of Indoles and Benzofurans

An efficient cobalt(III)‐catalyzed intramolecular cross‐dehydrogenative C?H/N?H coupling of ortho‐alkenylanilines has been developed utilizing O₂ as a terminal oxidant. The developed reaction tolerates various reactive functional groups and allows the synthesis of diverse indole derivatives in good to excellent yields. The method was successfully extended to the synthesis of benzofurans through the intramolecular cross‐dehydrogenative C?H/O?H coupling of ortho‐alkenylphenols.     

Catalytic Friedel–Crafts C−H Borylation of Electron‐Rich Arenes: Dramatic Rate Acceleration by Added Alkenes

In the electrophilic C−H borylation of electron‐rich aromatic compounds with catecholborane, the catalytic generation of the boron electrophile is initiated by heterolysis of the B−H bond by various Lewis and Brønsted acids, with a boronium ion formed exclusively. After ligand dissociation, the corresponding borenium ion undergoes regioselective electrophilic aromatic substitution on aniline derivatives as well as nitrogen‐containing heterocycles. The catalysis is optimized using B(C₆F₅)₃ as the initiator and proceeds without the addition of an external base or dihydrogen acceptor. Temperatures above 80 °C are generally required to secure efficient turnover in these Friedel–Crafts‐type reactions. Mechanistic experiments reveal that regeneration of the boronium/borenium ion with dihydrogen release is rate‐determining. This finding finally led to the discovery that, with added alkenes, catalytic C−H borylations can, for the first time, be carried out at room temperature.     

Nickel‐Catalyzed Stereospecific C−H Coupling of Benzamides with Epoxides

A Ni(OAc)₂‐catalyzed C?H coupling of 8‐aminoquinoline‐derived benzamides with epoxides has been developed. The reaction proceeds with concomitant removal of the 8‐aminoquinoline auxiliary to form the corresponding 3,4‐dihydroisocoumarins directly. Additionally, the nickel catalysis is stereospecific, and the cis‐ and trans‐epoxides are converted into the corresponding cis‐ and trans‐dihydroisocoumarins with retention of configuration, which is complementary to previously reported palladium catalysis. Moreover, while still preliminary, the C ?H functionalization is also achieved in the presence of modified NiCl₂ catalysts.     

Facile P−C/C−H Bond‐Cleavage Reactivity of Nickel Bis(diphosphine) Complexes

Unusual cleavage of P?C and C?H bonds of the P₂N₂ ligand, in heteroleptic [Ni(P₂N₂)(diphosphine)]²⁺ complexes under mild conditions, results in the formation of an iminium formyl nickelate featuring a C,P,P‐tridentate coordination mode. The structures of both the heteroleptic [Ni(P₂N₂)(diphosphine)]²⁺ complexes and the resulting iminium formyl nickelate have been characterized by NMR spectroscopy and single‐crystal X‐ray diffraction analysis. Density functional theory (DFT) calculations were employed to investigate the mechanism of the P?C/C?H bond cleavage, which involves C?H bond cleavage, hydride rotation, Ni?C/P?H bond formation, and P?C bond cleavage.     

B(C6F5)3/Chiral Phosphoric Acid Catalyzed Ketimine–Ene Reaction of 2‐Aryl‐3H‐indol‐3‐ones and α‐Methylstyrenes

The enantioselective ketimine–ene reaction is one of the most challenging stereocontrolled reaction types in organic synthesis. In this work, catalytic enantioselective ketimine–ene reactions of 2‐aryl‐3H‐indol‐3‐ones with α‐methylstyrenes were achieved by utilizing a B(C₆F₅)₃/chiral phosphoric acid (CPA) catalyst. These ketimine–ene reactions proceed well with low catalyst loading (B(C₆F₅)₃/CPA=2 mol %/2 mol %) under mild conditions, providing rapid and facile access to a series of functionalized 2‐allyl‐indolin‐3‐ones with very good reactivity (up to 99 % yield) and excellent enantioselectivity (up to 99 % ee). Theoretical calculations reveal that enhancement of the acidity of the chiral phosphoric acid by B(C₆F₅)₃ significantly reduces the activation free energy barrier. Furthermore, collective favorable hydrogen‐bonding interactions, especially the enhanced N?H???O hydrogen‐bonding interaction, differentiates the free energy of the transition states of CPA and B(C₆F₅)₃/CPA, thereby inducing the improvement of stereoselectivity.     

Triiodide‐Mediated δ‐Amination of Secondary C−H Bonds

The C_δ?H amination of unactivated, secondary C?H bonds to form a broad range of functionalized pyrrolidines has been developed by a triiodide (I₃^?)‐mediated strategy. By in situ 1) oxidation of sodium iodide and 2) sequestration of the transiently generated iodine (I₂) as I₃^?, this approach precludes undesired I₂‐mediated decomposition which can otherwise limit synthetic utility to only weak C(sp³)?H bonds. The mechanism of this triiodide‐mediated cyclization of unbiased, secondary C(sp³)?H bonds, by either thermal or photolytic initiation, is supported by NMR and UV/Vis data, as well as intercepted intermediates.     

Binuclear Aromatic C−H Bond Activation at a Dirhenium Site

The electronically unsaturated dirhenium complex [Re₂(CO)₈(μ‐H)(μ‐Ph)] ( 1 ) has been found to exhibit aromatic C?H activation upon reaction with N,N‐diethylaniline, naphthalene, and even [D₆]benzene to yield the compounds [Re₂(CO)₈(μ‐H)(μ‐η¹‐NEt₂C₆H₄)] ( 2 ), [Re₂(CO)₈(μ‐H)(μ‐η²‐1,2‐C₁₀H₇)] ( 3 ), and [D₆]‐ 1 , respectively, in good yields. The mechanism has been elucidated by using DFT computational analyses, and involves a binuclear C?H bond‐activation process.     

Unprecedented Reaction Pathway of Sterically Crowded Calcium Complexes: Sequential C−N Bond Cleavage Reactions Induced by C−H Bond Activations

Five bis(quinolylmethyl)‐(1H ‐indolylmethyl)amine (BQIA) compounds, that is, {(quinol‐8‐yl‐CH₂)₂NCH₂(3‐Br‐1H ‐indol‐2‐yl)} ( L¹H ) and {[(8‐R³‐quinol‐2‐yl)CH₂]₂NCH(R²)[3‐R¹‐1H ‐indol‐2‐yl]} ( L^2–5H ) ( L²H : R¹=Br, R²=H, R³=H; L³H : R¹=Br, R²=H, R³=i Pr; L⁴H : R¹=H, R²=CH₃, R³=i Pr; L⁵H : R¹=H, R²=n Bu, R³=i Pr) were synthesized and used to prepare calcium complexes. The reactions of L^1–5H with silylamido calcium precursors (Ca[N(SiMe₂R)₂]₂(THF)₂, R=Me or H) at room temperature gave heteroleptic products ( L^{1, 2} )CaN(SiMe₃)₂ ( 1 , 2 ), ( L^{3, 4} )CaN(SiHMe₂)₂ ( 3 a , 4 a ) and homoleptic complexes ( L^{3, 5} )₂Ca ( D3 , D5 ). NMR and X‐ray analyses proved that these calcium complexes were stabilized through Ca⋅⋅⋅C−Si, Ca⋅⋅⋅H−Si or Ca⋅⋅⋅H−C agostic interactions. Unexpectedly, calcium complexes (( L^3–5 )CaN(SiMe₃)₂) bearing more sterically encumbered ligands of the same type were extremely unstable and underwent C−N bond cleavage processes as a consequence of intramolecular C−H bond activation, leading to the exclusive formation of (E )‐1,2‐bis(8‐isopropylquinol‐2‐yl)ethane.     

Enantioselective Nazarov Cyclizations Catalyzed by an Axial Chiral C6F5‐Substituted Boron Lewis Acid

A chiral variant of B(C₆F₅)₃ with a 3,3′‐disubstituted binaphthyl backbone is shown to catalyze Nazarov cyclizations with high levels of enantio‐ and diastereocontrol. The parent B(C₆F₅)₃ also promotes these ring closures efficiently. This electrocyclization is another example of the still small family of C?C bond formations mediated by B(C₆F₅)₃ as the catalyst.     

Directing‐Group‐mediated C−H‐Alkynylations

C?C triple bonds are amongst the most versatile functional groups in synthetic chemistry. Complementary to the Sonogashira coupling the direct metal‐catalyzed alkynylation of C?H bonds has emerged as a highly promising approach in recent years. To guarantee a high regioselectivity suitable directing groups (DGs) are necessary to guide the transition metal (TM) into the right place. In this Focus Review we present the current developments in DG‐mediated C(sp²)?H and C(sp³)?H modifications with terminal alkynes under oxidative conditions and with electrophilic alkynylation reagents. We will discuss further modifications of the alkyne, in particular subsequent cyclizations to carbo‐ and heterocycles and modifications of the DG in the presence of the alkyne.     

Palladium‐Catalyzed Synthesis of Benzophenanthrosilines by C−H/C−H Coupling through 1,4‐Palladium Migration/Alkene Stereoisomerization

A new and efficient synthesis of 8H‐benzo[e]phenanthro[1,10‐bc]silines from 2‐((2‐(arylethynyl)aryl)silyl)aryl triflates under palladium catalysis has been developed. The reaction mechanism was experimentally investigated and a catalytic cycle involving C?H/C?H coupling through a new mode of 1,4‐palladium migration with concomitant alkene stereoisomerization is proposed.     

Utilising Sodium‐Mediated Ferration for Regioselective Functionalisation of Fluoroarenes via C−H and C−F Bond Activations

Pairing iron bis(amide) Fe(HMDS)₂ with Na(HMDS) to form new sodium ferrate base [(dioxane)_0.5?NaFe(HMDS)₃] ( 1 ) enables regioselective mono and di‐ferration (via direct Fe?H exchange) of a wide range of fluoroaromatic substrates under mild reaction conditions. Trapping of several ferrated intermediates has provided key insight into how synchronised Na/Fe cooperation operates in these transformations. Furthermore, using excess 1 at 80 °C switches on a remarkable cascade process inducing the collective twofold C?H/threefold C?F bond activations, where each C?H bond is transformed to a C?Fe bond whereas each C?F bond is transformed into a C?N bond.     

Metal‐ and Oxidant‐Free Alkenyl C−H/Aromatic C−H Cross‐Coupling Using Electrochemically Generated Iodosulfonium Ions

A three‐step transformation consisting of 1) addition of electrochemically generated iodosulfonium ions to vinylarenes to give (1‐aryl‐2‐iodoethoxy)sulfonium ions, 2) nucleophilic substitution by subsequently added aromatic compounds to give 1,1‐diaryl‐2‐iodoethane, and 3) elimination of HI with a base to give 1,1‐diarylethenes was developed. The transformation serves as a powerful metal‐ and chemical‐oxidant‐free method for alkenyl C?H/aromatic C?H cross‐coupling.     

Single and Twofold Metal‐ and Reagent‐Free Anodic C−C Cross‐Coupling of Phenols with Thiophenes

The first electrochemical dehydrogenative C−C cross‐coupling of thiophenes with phenols has been realized. This sustainable and very simple to perform anodic coupling reaction enables access to two classes of compounds of significant interest. The scope for electrochemical C−H‐activating cross‐coupling reactions was expanded to sulfur heterocycles. Previously, only various benzoid aromatic systems could be converted, while the application of heterocycles was not successful in the electrochemical C−H‐activating cross‐coupling reaction. Here, reagent‐ and metal‐free reaction conditions offer a sustainable electrochemical pathway that provides an attractive synthetic method to a broad variety of bi‐ and terarylic products based on thiophenes and phenols. This method is easy to conduct in an undivided cell, is scalable, and is inherently safe. The resulting products offer applications in electronic materials or as [OSO]²⁻ pincer‐type ligands.     

Shedding Light on the Diverse Reactivity of NacNacAl with N‐Heterocycles

The aluminum(I) compound NacNacAl (NacNac=[ArNC(Me)CHC(Me)NAr]^?, Ar=2,6‐iPr₂C₆H₃, 1 ) shows diverse and substrate‐controlled reactivity in reactions with N‐heterocycles. 4‐Dimethylaminopyridine (DMAP), a basic substrate in which the 4‐position is blocked, induces rearrangement of NacNacAl by shifting a hydrogen atom from the methyl group of the NacNac backbone to the aluminum center. In contrast, C?H activation of the methyl group of 4‐picoline takes place to produce a species with a reactive terminal methylene. Reaction of 1 with 3,5‐lutidine results in the first example of an uncatalyzed, room‐temperature cleavage of an sp² C?H bond (in the 4‐position) by an Al^I species. Another reactivity mode was observed for quinoline, which undergoes 2,2′‐coupling. Finally, the reaction of 1 with phthalazine produces the product of N?N bond cleavage.