Synthesis,structure and catalytic polymerization activity of half‐sandwich cyclometallated iridium complexes

A series of mononuclear half‐sandwich cyclometallated iridium complexes with Schiff base ligands were synthesized in good yields. Five air‐stable C,N‐chelate mode complexes were obtained smoothly through metal‐mediated C─H bond activation. Treatments of dimeric metal complexes [Cp*IrCl₂]₂ with ligands L1–L5 afforded the corresponding C,N‐chelate mononuclear half‐sandwich iridium(III) complexes 1 – 5 . These iridium complexes exhibit high catalytic activity for norbornene polymerization. Both steric and electronic effects of the substituted groups have influences on the behaviors of the polymerization process. All complexes were characterized using infrared and NMR spectroscopies and elemental analysis. Molecular structures of complexes 1 , 2 and 5 were further confirmed using single‐crystal X‐ray analysis.     

ONO pincer palladium (II) complexes featuring furoylhydrazone ligands: Synthesis,characterization and catalytic activity towards Suzuki–Miyaura coupling reaction

Four new palladium pincer complexes incorporating ONO type furoylhydrazone ligands have been prepared in good yields. These palladium complexes were structurally characterized by elemental analysis, infrared, ¹H‐ and ¹³C‐NMR spectra. X‐ray single crystal analyses of Pd1–Pd4 revealed that the metal center adopted a slightly distorted square planar geometry in which the hydrazone bound the metal ion via the phenolic‐O, azomethine‐N and imidolate‐O atoms. Using these ONO pincer complexes as catalyst, excellent yields of biaryls could be obtained for coupling of arylboronic acids with aryl bromides at a low catalyst loading (0.01 mol%).     

Vinyl homo/copolymerization of norbornene and ethylene using sterically enhanced 1,2‐bis(arylimino)acenaphthene–palladium precatalysts

A family of unsymmetrical 1,2‐bis(imino)acenaphthene‐palladium methyl chloride complexes [1‐[2,6‐{(C₆H₅)₂CH}₂‐ 4‐{C(CH₃)₃}‐C₆H₂N]‐2‐(ArN)C₂C₁₀H₆]PdMeCl (Ar = 2,6‐Me₂Ph Pd1 , 2,6‐Et₂Ph Pd2 , 2,6‐ⁱPr₂Ph Pd3 , 2,4,6‐Me₃Ph Pd4 , 2,6‐Et₂‐4‐MePh Pd5 ) have been prepared and fully characterized by ¹H/¹³C NMR, FTIR spectroscopies, and elemental analysis. X‐ray diffraction analysis of Pd2 complex revealed a square planar geometry. Upon activation with methylaluminoxane, all the palladium complexes displayed high activities for norbornene (NBE) homo‐polymerization producing insoluble polymer. For the copolymerization of NBE with ethylene, Pd4 complex exhibited good activities with high incorporation of ethylene (up to 59.2–77.4%) and the resultant copolymer showed high molecular weights as maximum as 150.5 kg mol⁻¹. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 922–930     

Phosphine Ligands in the Palladium‐Catalysed Methoxycarbonylation of Ethene: Insights into the Catalytic Cycle through an HP NMR Spectroscopic Study

Novel cis‐1,2‐bis(di‐tert‐butyl‐phosphinomethyl) carbocyclic ligands 6 – 9 have been prepared and the corresponding palladium complexes [Pd(O₃SCH₃)(L‐L)][O₃SCH₃] (L‐ L=diphosphine) 32 – 35 synthesised and characterised by NMR spectroscopy and X‐ray diffraction. These diphosphine ligands give very active catalysts for the palladium‐catalysed methoxycarbonylation of ethene. The activity varies with the size of the carbocyclic backbone, ligands 7 and 9 , containing four‐ and six‐membered ring backbones giving more active systems. The acid used as co‐catalyst has a strong influence on the activity, with excess trifluoroacetic acid affording the highest conversion, whereas excess methyl sulfonic acid inhibits the catalytic system. An in operando NMR spectroscopic mechanistic study has established the catalytic cycle and resting state of the catalyst under operating reaction conditions. Although the catalysis follows the hydride pathway, the resting state is shown to be the hydride precursor complex [Pd(O₃SCH₃)(L‐ L)][O₃SCH₃], which demonstrates that an isolable/detectable hydride complex is not a prerequisite for this mechanism.     

Orthopalladated complexes of phosphorus ylide: Poly(N‐vinyl‐2‐pyrrolidone)‐stabilized palladium nanoparticles as reusable heterogeneous catalyst for Suzuki and Heck cross‐coupling reactions

The phosphorus ylide [Ph₃PCHC(O)C₆H₄‐NO₂–4] reacted with Pd(OAc)₂ to give the C,C‐orthometallated complex [Pd{κ²(C,C)‐C₆H₄PPh₂C(H)CO(C₆H₄‐NO₂–4)}(μ‐OAc)]₂, which underwent bridge exchange reaction with NaN₃, NaCl, KBr and KI, respectively, to afford the binuclear C,C‐orthopalladated complexes [Pd{κ²(C,C)‐C₆H₄PPh₂C(H)CO(C₆H₄‐NO₂–4)}(μ‐X)]₂ (X = N₃ ( 1 ), Cl ( 2 ), Br ( 3 ) and I ( 4 )). The complexes were identified using spectroscopy (infrared and NMR), CHNS technique and single‐crystal X‐ray structure analysis. Thereafter, palladium nanoparticles with narrow size distribution were easily prepared using the refluxing reaction of iodo‐bridged orthopalladated complex 4 with poly(N ‐vinyl‐2‐pyrrolidone) (PVP) as the protecting group. The PVP‐stabilized palladium nanoparticles were characterized using a variety of techniques including X‐ray diffraction, transmission and scanning electron microscopies, energy‐dispersive X‐ray spectroscopy, inductively coupled plasma analysis and Fourier transform infrared spectroscopy. The catalytic activity of the PVP‐stabilized palladium nanoparticles was evaluated in the Suzuki reaction of phenylboronic acid and the Heck reaction of styrene with aryl halides of varying electron densities. This catalyst exhibited excellent catalytic activity for Suzuki cross‐coupling reactions in ethanol–water. Notably, aryl chlorides which are cheaper and more accessible than their bromide and iodide counterparts also reacted satisfactorily using this catalyst. After completion of reactions, the catalyst could be separated using a simple method and used many times in repeat cycles without considerable loss in its activity.     

Synthesis and Characterization of Monomeric Aryloxo Palladium Complexes of the Type [Pd(N–N)(OAr)(C6F5)]. Crystal Structure of [Pd(tmeda)(C6F5)(OC6H4NO2‐p)]

Mononuclear palladium‐hydroxo complexes of the type [Pd(N–N)(C₆F₅)(OH)][(N–N) = 2,2′‐bipyridine (bipy), 4,4′‐dimethyl‐2,2′‐bipyridine (Me₂bipy), 1,10‐phenantroline (phen) or N,N,N′,N′‐tetramethylethylenediamine (tmeda) react with phenols ArOH in tetrahydrofuran giving the corresponding aryloxo complexes [Pd(N–N)(C₆F₅)(OAr)]. Elemental analyses and spectroscopic (IR, ¹H and ¹⁹F) methods have been used to characterize the new complexes. The X‐ray crystal structure of [Pd(tmeda)(C₆F₅)(OC₆H₄NO₂‐p)] has been determined. In the crystal packing the planes defined by two C₆H₄ rings show a parallel orientation. There are also intermolecular C–H···F and C‐H···O hydrogen bonds.     

Judiciously balancing steric and electronic influences on 2,3‐diiminobutane‐based Pd(II) complexes in nourishing polyethylene properties

A new series of palladium complexes ( Pd1–Pd5 ) ligated by symmetrical 2,3‐diiminobutane derivatives, 2,3‐bis[2,6‐bis{bis(4‐FC₆H₄)₂CH}₂‐4‐(alkyl)C₆H₂N]C₄H₆ (alkyl = Me L1 , Et L2 , ⁱ Pr L3 , ^t Bu L4 ) and 2,3‐bis[2,6‐bis{bis(C₆H₅)₂CH}₂‐4‐{(CH₃)₃C}C₆H₂N]C₄H₆ L5 , have been prepared and well characterized, and their catalytic scope toward ethylene polymerization have been investigated. Upon activation with MAO, all palladium complexes ( Pd1–Pd5) exhibited good activities (up to 1.44 × 10⁶ g (PE) mol^?1(Pd) h^?1) and produced higher molecular weight polyethylene in the range of 10⁵ g mol^?1 with precise molecular weight distribution (M _w/M _n = 1.37–1.77). One of the long‐standing limiting features of the Brookhart type α‐diimine Pd(II) catalysts is that they produce highly branched (ca. 100/1000 C atoms) and totally amorphous polymer. Conversely, herein Pd5 produced polymers having dramatically lower branching number (28/1000) as well as improved melting temperature up to 73.1 °C showing well‐controlled linear architecture, and very similar to polyethylene materials generated by early‐transition‐metal based catalysts. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3214–3222     

Imino‐indolate half‐titanocene chlorides: Synthesis and their ethylene (co‐)polymerization

A series of imino‐indolate half‐titanocene chlorides, Cp′Ti(L)Cl₂ ( C1 – C7 : Cp′ = C₅H₅, MeC₅H₄, C₅Me₅, L = imino‐indolate ligand), were synthesized by the reaction of Cp′TiCl₃ with sodium imino‐indolates. All complexes were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. Moreover, the molecular structures of two representative complexes C4 and C6 were confirmed by single crystal X‐ray diffraction analysis. On activation with methylaluminoxane (MAO), these complexes showed good catalytic activities for ethylene polymerization (up to 7.68 × 10⁶ g/mol(Ti)·h) and ethylene/1‐hexene copolymerization (up to 8.32 × 10⁶ g/mol(Ti)·h), producing polyolefins with high molecular weights (for polyethylene up to 1808 kg/mol, and for poly(ethylen‐co‐1‐hexene) up to 3290 kg/mol). Half‐titanocenes containing ligands with alkyl substituents showed higher catalytic activities, whereas the half‐titanocenes bearing methyl substituents on the cyclopentadienyl groups showed lower productivities, but produced polymers with higher molecular weights. Moreover, the copolymerization of ethylene and methyl 10‐undecenoate was demonstrated using the C1 /MAO catalytic system. The functionalized polyolefins obtained contained about 1 mol % of methyl 10‐undecenoate units and were fully characterized by several techniques such as FT‐IR, ¹H NMR, ¹³C NMR, DSC, TGA and GPC analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 357–372, 2009     

Biological evaluation of organometallic palladium(II) complexes containing 4‐hydroxybenzoic acid (3‐ethoxy‐2‐hydroxybenzylidene)hydrazide: Synthesis,structure, DNA/protein binding,antioxidant activity and cytotoxicity

New palladium(II) complexes, [Pd(PPh₃)L] ( 2 ) and [Pd(AsPh₃)L] ( 3 ), were synthesized using 4‐hydroxybenzoic acid (3‐ethoxy‐2‐hydroxybenzylidene)hydrazide ( 1 ) ligand (H₂L), and characterized using various physicochemical techniques. The molecular structures of 2 and 3 were determined using single‐crystal X‐ray diffraction, which reveals a square planar geometry around the palladium(II) metal ion. In vitro DNA binding studies were conducted using UV–visible absorption spectroscopy, emission spectroscopy, cyclic voltammetry and viscosity measurements, which suggest that the metal complexes act as efficient DNA binders. The interaction of ligand H₂L and complexes 2 and 3 with bovine serum albumin (BSA) was investigated using UV–visible and fluorescence spectroscopies. Absorption and emission spectral studies indicate that complexes 2 and 3 interact with BSA protein more strongly than the parent ligand. The free radical scavenging potential of all the synthesised compounds ( 1 – 3 ) was also investigated under in vitro conditions. In addition, the in vitro cytotoxicity of the complexes to tumour cells lines (HeLa and MCF‐7) was examined using the MTT assay method.     

Cationic palladium(II)–acetylacetonate complexes bearing pyridinyl imine ligands as catalysts for the hydroamination of phenylacetylene and polymerization of norbornene

Acetylacetonate palladium(II) complexes bearing pyridinyl imine ligands [Pd(acac)(L)]BF₄ were synthesized via nitrile displacement in [Pd(acac)(MeCN)₂]BF₄ by the bidentate ligands L of type 2-C₅H₄N–CH=N–(CH₂)_nOMe or 2-C₅H₄N–CH=N–Ar. The structures of complexes were analyzed by X-ray diffractometry, NMR, and DFT. The complexes catalyze hydroamination of phenylacetylene with aniline to give the Markovnikov imine product as well as polymerization of norbornene.     

Piperazine‐ and DABCO‐bridged dinuclear N‐heterocyclic carbene palladium complexes: synthesis,structure and application to Hiyama coupling reaction

Four dinuclear N ‐heterocyclic carbene (NHC) palladium complexes were prepared by reaction of imidazolinium salts, PdCl₂ and bridging ligands (piperazine and DABCO) in one pot or by direct cleavage of the chloro‐bridged dimeric compounds [Pd(μ ‐Cl)(Cl)(NHC)]₂ with bridging ligands. All of the complexes were fully characterized using ¹H NMR, ¹³C NMR, high‐resolution mass and infrared spectroscopies, elemental analysis and single‐crystal X‐ray diffraction. The catalytic activities of the obtained palladium catalysts towards Hiyama coupling of aryl chlorides with phenyltrimethoxysilane were investigated and the results showed that the dinuclear palladium complexes were considerably active for the coupling reaction. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and Structural Characterization of Four Zinc Complexes Containing 3,5‐Dimethylpyrazole and Carboxylate Ligands

Four new zinc(II) complexes Zn₂(μ‐dmpz)₂(Hdmpz)₂(L1)₂ ( 1 ) (Hdmpz = 3,5‐dimethylpyrazole, HL1 = 2‐methyl‐2‐phenoxypropanoic acid), Zn(Hdmpz)₂(L2)₂ ( 2 ) [HL2 = 2‐hydroxy‐5‐(phenyldiazenyl)benzoic acid], Zn₂(μ‐dmpz)₂(Hdmpz)₂(L3)₂ ( 3 ) [HL3 = 3,4‐(methylenedioxy)benzoic acid], and Zn₂(μ‐dmpz)₂(Hdmpz)₂(L4)₂ ( 4 ) [HL4 = 3‐(4‐methoxyphenyl)acrylic acid] were prepared and structurally characterized by different techniques including elemental analysis, IR spectroscopy, and single‐crystal X‐ray diffraction analysis. The X‐ray studies suggested that all these complexes except compound 2 are centrosymmetric dinuclear complexes with a tetrahedral arrangement around each zinc ion, whereas compound 2 is a mononuclear complex. The pyrazole ligand is coordinated in both terminal as well as a bridging fashion in the dinuclear moiety, whereas the pyrazole ligand in compound 2 is coordinated only in monodentate terminal fashion with its neutral nitrogen group. In all four complexes the carboxylate functions behave as monodentate ligands. All complexes show intramolecular hydrogen bonding of N–H ··· O between N–H of pyrazole and nonbonded oxygen atom of carboxylate. Furthermore, rich intermolecular weak interactions such as classical hydrogen bonds, C–H ··· O, C–H ··· N, C–H ··· π, and CH₃–π interactions exist and complexes 1 – 4 display a set of 3D superamolecular frameworks. In addition, the four compounds are thermally stable below 150 °C.     

Syntheses and Crystal Structures of Three Palladium（Ⅱ） Complexes with Isonitrosobenzoylacetoneimine Ligand

Three palladium (II) complexes with the isonitrosobenzoylacetoneimine (HIBI) ligand, Pd (p‐CH₃C₆H₄IBI)₂ (1), Pd (C₆H₅IBI)₂ (2) and Pd₂Cl₂ (C₆H₅CH₂IBI)₂ · CHCl₃ (3), were prepared and characterized by IR, Raman and X‐ray diffraction studies. The geometries around the palladium atoms in the complexes 1 and 2 are distorted trans‐PdN₄ square planes, and the Schiff base ligands RIBI^? are coordinated through their oximo‐nitrogen atoms and imino‐nitrogen atoms. The week Pd…H? C agostic interactions [Pd…H = 0.2764 nm] complete the hexacoordinate environment around palladium in the complex 1. The octahedral deformation of the classical square planar environment of the Pd atom is due to the week Pd…O (1b) interactions [Pd? O (1b) = 0.3157 (9) nm] in the complex 2. The complex 3 is a first example of binuclear complex with isonitrosoketoimine ligands, in which one of oximo groups is coordinated through oximo‐nitrogen and oximo‐oxygen atoms.     

Synthesis,Characterization, and Crystal Structure of Three Coordination Polymers from 5‐(Pyridin‐2‐ylmethyl)aminoisophthalic Acid

Three new complexes: [M(L)(H₂O)] [M = Zn ( 1 ), Co ( 2 ), Ni ( 3 ); H₂L = 5‐(pyridin‐2‐ylmethyl)aminoisophthalic acid] were synthesized under hydrothermal conditions at 180 °C and were characterized by elemental analysis, FT‐IR spectroscopy, single‐crystal X‐ray diffraction, and thermogravimetric analysis (TGA). The results of X‐ray diffraction analysis reveal that complexes 1 – 3 are isostructural and crystallize in the monoclinic system with space group P2₁/c. Each of the complexes displays a (3,3′)‐connected two‐dimensional (2D) wave‐like network with (4,8²) topology, within which five‐membered uncoplanar N,N‐chelated metallacycles are shaped. Delicate N–H ··· O and O–H ··· O hydrogen bonding interactions exist in complexes 1 – 3 . Adjacent 2D layers are linked by intermolecular interactions, resulting in the construction of extended metal‐organic frameworks (MOFs) in complexes 1 and 2 .     

Olefin polymerization with Me4Cp–Amido complexes with electron‐withdrawing groups

A series of Me₄Cp–amido complexes {[η⁵:η¹‐(Me₄C₅)SiMe₂NR]TiCl₂; R = t‐Bu, 1 ; C₆H₅, 2 ; C₆F₅, 3 ; SO₂Ph, 4 ; or SO₂Me, 5 } were prepared and investigated for olefin polymerization in the presence of methylaluminoxane (MAO). X‐ray crystallography of complexes 3 and 4 revealed very long Ti N bonds relative to the bonds of 1 . These complexes were employed for ethylene–styrene copolymerizations, styrene homopolymerizations, and propylene homopolymerizations in the presence of MAO. The productivities of the catalysts derived from 3 – 5 were much lower than the productivity of the catalyst derived from 1 for the propylene polymerizations and ethylene–styrene copolymerizations, whereas the styrene polymerization activities were much higher for the catalysts derived from 3 – 5 than for the catalyst derived from 1 . The polymerization behavior of the catalysts derived from the metallocenes 3 – 5 were more reminiscent of monocyclopentadienyl titanocene Cp′TiX₃/MAO catalysts than of CpATiX₂/MAO catalysts such as 1 containing alkylamido ligands. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4649–4660, 2000     

N‐(2‐benzimidazolylquinolin‐8‐yl)benzamidate half‐titanocene chlorides: Synthesis,characterization and their catalytic behavior toward ethylene polymerization

A series of N‐(2‐benzimidazolyquinolin‐8‐yl)benzamidate half‐titanocene chlorides, Cp′TiLCl ( C1 – C8 : Cp′ = C₅H₅, MeC₅H₄, or C₅Me₅; L = N‐(benzimidazolyquinolin‐8‐yl)benzamides)), was synthesized by the KCl elimination reaction of half‐titanocene trichlorides with the correspondent potassium N‐(2‐benzimidazolyquinolin‐8‐yl)benzamide. These half‐titanocene complexes were fully characterized by elemental and NMR analyses, and the molecular structures of complexes C2 and C8 were determined by the single‐crystal X‐ray diffraction. The high stability of the pentamethylcyclopentadienyl complex ( C8 ) was evident by no decomposing nature of its solution in air for one week. The oxo‐bridged dimeric complex ( C9 ) was isolated from the solution of the corresponding cyclopentadienyl complex ( C3 ) solution in air. Complexes C1 – C8 exhibited good to high catalytic activities toward ethylene polymerization and ethylene/α‐olefin copolymerization in the presence of methylaluminoxane (MAO) cocatalyst. In the typical catalytic system of C1/ MAO, the polymerization productivities were enhanced with either elevating reaction temperature or increasing the ratio of MAO to titanium precursor. In general, it was observed that higher the catalytic activity of the catalytic system lower the molecular weight of polyethylene. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3154–3169, 2009     

A tridentate CNO‐donor palladium(II) complex as efficient catalyst for direct C―H arylation: Application in preparation of imidazole‐based push–pull chromophores

A series of imidazolium chlorides for the formation of tridentate CNO‐donor palladium(II) complexes featuring N‐heterocyclic carbene moieties have been developed from cheap and readily available starting materials with high yields. Their palladium complexes were prepared by reactions between the ligand precursors and PdCl₂ using K₂CO₃ as base in pyridine with reasonable yields. These air‐stable metal complexes were characterized using ¹H NMR and ¹³C{¹H} NMR spectroscopy and elemental analyses. Heteronuclear multiple bond correlation experiments were performed to identify key NMR signals of these compounds. The structures of two of the complexes were also established by single‐crystal X‐ray diffraction analysis. One of these complexes was successfully applied in the direct C―H functionalization reactions between heterocyclic compounds and aryl bromides, producing excellent yields of coupled products. The coupling reactions were scalable, allowing grams of coupled products to be obtained with a mere 2 mol% of Pd loading. The catalyst system developed allowed the large‐scale preparation of several push–pull chromophores straightforwardly. Photophysical properties based on UV–visible and fluorescence spectroscopy for these chromophores were investigated. Deep blue photoluminescence with moderate quantum efficiency and twisted intramolecular charge transfer excited state were observed for these chromophores. Density functional theory (DFT) and time‐dependent DFT calculations were performed to support the experimental results.     

Variable Bonding Modes of Pyrimidine‐2‐thione in PdII/PtII Complexes [M(η2‐N,S‐pymS)(η1‐S‐pymS)(PPh3)] and [M(η1‐S‐pymS)2(L‐L)] (L‐L = dppm,dppe)

Reactions of pyrimidine‐2‐thione (HpymS) with Pd^II/Pt^IV salts in the presence of triphenyl phosphine and bis(diphenylphosphino)alkanes, Ph₂P‐(CH₂)_m‐PPh₂ (m = 1, 2) have yielded two types of complexes, viz. a) [M(η²‐N, S‐ pymS)(η¹‐S‐ pymS)(PPh₃)] (M = Pd, 1 ; Pt, 2 ), and (b) [M(η¹‐S‐pymS)₂(L‐L)] {L‐L, M = dppm (m = 1) Pd, 3 ; Pt, 4 ; dppe (m = 2), Pd, 5 ; Pt, 6 }. Complexes have been characterized by elemental analysis (C, H, N), NMR spectroscopy (¹H, ¹³C, ³¹P), and single crystal X‐ray crystallography ( 1 , 2 , 4 , and 5 ). Complexes 1 and 2 have terminal η¹‐S and chelating η²‐N, S‐modes of pymS⁻, while other Pd/Pt complexes have only terminal η¹‐S modes. The solution state ³¹P NMR spectral data reveal dynamic equilibrium for the complexes 3 , 5 and 6 , whereas the complexes 1 , 2 and 4 are static in solution state.     

Structural and theoretical studies of the methoxycarbonylation of higher olefins catalysed by (Pyrazolyl‐ethyl)pyridine palladium (II) complexes

Reactions of 2‐[1‐(3,5‐dimethylpyrazol‐1‐yl)ethyl]pyridine (L1) and 2‐[1‐(3,5‐diphenylpyrazol‐1‐yl)ethyl]pyridine (L2) with the [Pd (COD)Cl₂] or [Pd (COD)MeCl] produced palladium (II) complexes [Pd( L1 )ClMe] ( 1 ), [Pd( L1 )Cl₂] ( C2 ), [Pd( L2 )ClMe] ( 3 ), and [Pd( L2 )Cl₂] ( 4 ) in quantitative yields. Solid state structures of complexes 1 , 3 and 4 established the formation of mononuclear compounds, containing one bidentate ligand unit per metal atom, to give square planar complexes. All the other spectroscopic characterization data and elemental analyses were consistent with the observed structures. All the palladium (II) complexes 1–4 gave active catalysts in the methoxycarbonylation of 1‐octenes. The catalysts demonstrated 100% chemoselectivities towards esters and favored the formation of linear isomers. Reaction conditions such as the type of phosphine derivative, acid promoter, solvent system, time, pressure and temperature have been investigated and shown to affect both the catalytic activity and regio‐selectivity of the catalysts. Solid‐angle modelling established the comparable steric contributions from the ligands, consistent with the similar regioselectivities of the resultant catalysts.     

Palladium(II) Acetylide Complexes with Pincer‐Type Ligands: Photophysical Properties,Intermolecular Interactions,and Photo‐cytotoxicity

Two classes of cationic palladium(II) acetylide complexes containing pincer‐type ligands, 2,2′:6′,2′′‐terpyridine (terpy) and 2,6‐bis(1‐butylimidazol‐2‐ylidenyl)pyridine (C^N^C), were prepared and structurally characterized. Replacing terpy with the strongly σ‐donating C^N^C ligand with two N‐heterocyclic carbene (NHC) units results in the Pd^II acetylide complexes displaying phosphorescence at room temperature and stronger intermolecular interactions in the solid state. X‐ray crystal structures of [Pd(terpy)(C≡CPh)]PF₆ ( 1 ) and [Pd(C^N^C)(C≡CPh)]PF₆ ( 7 ) reveal that the complex cations are arranged in a one‐dimensional stacking structure with pair‐like Pd^II⋅⋅⋅Pd^II contacts of 3.349 Å for 1 and 3.292 Å for 7 . Density functional theory (DFT) and time‐dependent density functional theory (TD‐DFT) calculations were used to examine the electronic properties. Comparative studies of the [Pt(L)(C≡CPh)]⁺ analogs by ¹H NMR spectroscopy shed insight on the intermolecular interactions of these Pd^II acetylide complexes. The strong Pd−C_carbene bonds render 7 and its derivative sufficiently stable for investigation of photo‐cytotoxicity under cellular conditions.