Photo‐crosslinkable hydrogel‐based 3D microfluidic culture device

We developed the photo‐crosslinkable hydrogel‐based 3D microfluidic device to culture neural stem cells (NSCs) and tumors. The photo‐crosslinkable gelatin methacrylate (GelMA) polymer was used as a physical barrier in the microfluidic device and collagen type I gel was employed to culture NSCs in a 3D manner. We demonstrated that the pore size was inversely proportional to concentrations of GelMA hydrogels, showing the pore sizes of 5 and 25 w/v% GelMA hydrogels were 34 and 4 μm, respectively. It also revealed that the morphology of pores in 5 w/v% GelMA hydrogels was elliptical shape, whereas we observed circular‐shaped pores in 25 w/v% GelMA hydrogels. To culture NSCs and tumors in the 3D microfluidic device, we investigated the molecular diffusion properties across GelMA hydrogels, indicating that 25 w/v% GelMA hydrogels inhibited the molecular diffusion for 6 days in the 3D microfluidic device. In contrast, the chemicals were diffused in 5 w/v% GelMA hydrogels. Finally, we cultured NSCs and tumors in the hydrogel‐based 3D microfluidic device, showing that 53–75% NSCs differentiated into neurons, while tumors were cultured in the collagen gels. Therefore, this photo‐crosslinkable hydrogel‐based 3D microfluidic culture device could be a potentially powerful tool for regenerative tissue engineering applications.     

Sonochemical Degradation of Gelatin Methacryloyl to Control Viscoelasticity for Inkjet Bioprinting

Inkjet printing enables the mimicry of the microenvironment of natural complex tissues by patterning cells and hydrogels at a high resolution. However, the polymer content of an inkjet-printable bioink is limited as it leads to strong viscoelasticity in the inkjet nozzle. Here it is demonstrated that sonochemical treatment controls the viscoelasticity of a gelatin methacryloyl (GelMA) based bioink by shortening the length of polymer chains without causing chemical destruction of the methacryloyl groups. The rheological properties of treated GelMA inks are evaluated by a piezo-axial vibrator over a wide range of frequencies between 10 and 10 000 Hz. This approach enables to effectively increase the maximum printable polymer concentration from 3% to 10%. Then it is studied how the sonochemical treatment effectively controls the microstructure and mechanical properties of GelMA hydrogel constructs after crosslinking while maintaining its fluid properties within the printable range. The control of mechanical properties of GelMA hydrogels can lead fibroblasts more spreading on the hydrogels. A 3D cell-laden multilayered hydrogel constructs containing layers with different physical properties is fabrictated by using high-resolution inkjet printing. The sonochemical treatment delivers a new path to inkjet bioprinting to build microarchitectures with various physical properties by expanding the range of applicable bioinks.     

Precisely Controlled Delivery of Abaloparatide through Injectable Hydrogel to Promote Bone Regeneration

Side‐effects from allograft, limited bone stock, and site morbidity from autograft are the major challenges to traditional bone defect treatments. With the advance of tissue engineering, hydrogel injection therapy is introduced as an alternative treatment. Therapeutic drugs and growth factors can be carried by hydrogels and delivered to patients. Abaloparatide, as an analog of human recombinant parathyroid hormone protein (PTHrp) and an alternative to teriparatide, has been considered as a drug for treating postmenopausal osteoporosis since 2017. Since only limited cases of receiving abaloparatide with polymeric scaffolds have been reported, the effects of abaloparatide on pre‐osteoblast MC3T3‐E1 are investigated in this study. It is found that in vitro abaloparatide treatment can promote pre‐osteoblast MC3T3‐E1 cells’ viability, differentiation, and mineralization significantly. For the drug delivery system, 3D porous structure of the methacrylated gelatin (GelMA) hydrogel is found effective for prolonging the release of abaloparatide (more than 10 days). Therefore, injectable photo‐crosslinked GelMA hydrogel is used in this study to prolong the release of abaloparatide and to promote healing of defected bones in rats. Overall, data collected in this study show no contradiction and imply that Abaloparatide‐loaded GelMA hydrogel is effective in stimulating bone regeneration.     

The Mechanical and Biological Performance of Photopolymerized Gelatin-Based Hydrogels as a Function of the Reaction Media

From the first experiments with biomaterials to mimic tissue properties, the mechanical and biochemical characterization has evolved extensively. Several properties can be described, however, what should be essential is to conduct a proper and physiologically relevant characterization. Herein, the influence of the reaction media (RM) and swelling media (SM)–phosphate buffered saline (PBS) and Dulbecco's modified Eagle's medium (DMEM) with two different glucose concentrations–is described in gelatin methacrylamide (GelMA) hydrogel mechanics and in the biological behavior of two tumoral cell lines (Caco-2 and HCT-116). All scaffolds are UV-photocrosslinked under identical conditions and evaluated for mass swelling ratio and stiffness. The results indicate that stiffness is highly susceptible to the RM, but not to the SM. Additionally, PBS-prepared hydrogels exhibited a higher photopolymerization degree according to high resolution magic-angle spinning (HR-MAS) NMR. These findings correlate with the biological response of Caco-2 and HCT-116 cells seeded on the substrates, which demonstrated flatter morphologies on stiffer hydrogels. Overall, cell viability and proliferation are excellent for both cell lines, and Caco-2 cells displayed a characteristic apical-basal polarization based on F-actin/Nuclei fluorescence images. These characterization experiments highlight the importance of conducting mechanical testing of biomaterials in the same medium as cell culture.     

Hydrogel microfluidic co‐culture device for photothermal therapy and cancer migration

We developed the photo‐crosslinkable hydrogel microfluidic co‐culture device to study photothermal therapy and cancer cell migration. To culture MCF7 human breast carcinoma cells and metastatic U87MG human glioblastoma in the microfluidic device, we used 10 w/v% gelatin methacrylate (GelMA) hydrogels as a semi‐permeable physical barrier. We demonstrated the effect of gold nanorod on photothermal therapy of cancer cells in the microfluidic co‐culture device. Interestingly, we observed that metastatic U87MG human glioblastoma largely migrated toward vascular endothelial growth factor (VEGF)‐treated GelMA hydrogel‐embedding microchannels. The main advantage of this hydrogel microfluidic co‐culture device is to simultaneously analyze the physiological migration behaviors of two cancer cells with different physiochemical motilities and study gold nanorod‐mediated photothermal therapy effect. Therefore, this hydrogel microfluidic co‐culture device could be a potentially powerful tool for photothermal therapy and cancer cell migration applications.     

Comprehensive Examination of Mechanical and Diffusional Effects on Cell Behavior Using a Decoupled 3D Hydrogel System

Hydrogels possess several physical and chemical properties suitable for engineering cellular environments for biomedical applications. Despite recent advances in hydrogel systems for cell culture, it is still a significant challenge to independently control the mechanical and diffusional properties of hydrogels, both of which are well known to influence various cell behaviors when using hydrogels as 3D cell culture systems. Controlling the crosslinking density of a hydrogel system to tune the mechanical properties inevitably affects their diffusional properties, as the crosslinking density and diffusion are often inversely correlated. In this study, a polymeric crosslinker is demonstrated that allows for the adjustment of the degree of substitution of reactive functional groups. By using this polymeric crosslinker, the rigidity of the resulting hydrogel is controlled in a wide range without changing the polymer concentration. Furthermore, their diffusional properties, as characterized by their swelling ratios, pore diameters, and drug release rates, are not significantly affected by the changes in the degree of substitution. 3D cell studies using this hydrogel system successfully demonstrate the varying effects of mechanical properties on different cell types, whereas those in a conventional hydrogel system are more significantly influenced by changes in diffusional properties.     

Gelatin Methacryloyl Hydrogels in the Absence of a Crosslinker as 3D Glioblastoma Multiforme (GBM)‐Mimetic Microenvironment

3D platforms are important for monitoring tumor progression and screening drug candidates to eradicate tumors such as glioblastoma multiforme (GBM), a malignant type of human brain tumor. Here, a new strategy is reported that exploits visible‐light‐induced crosslinking of gelatin where the reaction is carried out in the absence of an additional crosslinker. Visible light‐induced crosslinking promotes the design of cancer microenvironment‐mimetic system without compromising the cell viability during the process and absence of crosslinker facilitates the synthesis of the unique construct. Suspension and spheroid‐based models of GBM are used to investigate cellular behavior, expression profiles of malignancy, and apoptosis‐related genes within this unique network. Furthermore, sensitivity to an anticancer drug, Digitoxigenin, treatment is investigated in detail. The data suggest that U373 cells, in sparse or spheroid form, have significantly decreased expressions of apoptosis‐activating genes, Bad, Puma, and Caspase‐3, and a high expression of prosurvival Bcl‐2 gene within GelMA hydrogels. Matrix‐metalloproteinase genes are also upregulated within GelMA, suggesting positive contribution of gels on extracellular remodeling of cancer cells. This unique photocurable gelatin holds great potential for clinical translation of cancer research through the analysis of 3D malignant cancer cell behavior, and hence for more efficient treatment methods for GBM.     

Phospholipid Polymer Hydrogel Matrices with Dually Immobilized Cytokines for Accelerating Secretion of the Extracellular Matrix by Encapsulated Cells

Construction of 3D tissues by various types of cells with specific characteristics is an important and fundamental technology in tissue reconstruction medicine and animal‐free diagnosis system. To do so, an excellent extracellular matrix (ECM) is needed for encapsulation of cells and maintaining cell activity. Spontaneously forming hydrogel matrix is used by complexation between two water‐soluble polymers, 2‐methacryloyloxyethyl phosphorylcholine polymer bearing phenylboronic acid groups and poly(vinyl alcohol). Two cytokines for cell proliferation are immobilized in the hydrogel matrix to control the activities of the encapsulated cells. The cytokine‐immobilized hydrogel matrix can encapsulate both L929 fibroblasts and normal human dermal fibroblasts under mild condition. The physical properties of the hydrogel matrix can follow the proliferation process of the encapsulated cells. The encapsulated cells secrete ECM in the polymer hydrogel networks upon 3D culturing for 7 days. Consequently, the tissue‐mimicking ECM hybrid hydrogels are fabricated successfully.     

紫外光共聚交联制备GelMA/PEGDA水凝胶

为避免物理交联明胶基水凝胶的热不稳定性,以及化学方法交联明胶基水凝胶存在的毒性,本文采用丙烯酰化的方法将甲基丙烯酸酐(MA)与明胶反应,在明胶分子链上引入双键结构,并且实现了紫外光照射引发甲基丙烯酰胺基明胶(GelMA)与聚乙二醇双丙烯酸酯(PEGDA)共聚交联制备水凝胶。研究了不同的MA加入量对明胶修饰度的影响,并对GelMA/PEGDA交联水凝胶理化性质进行了测试和分析。结果表明:体系中PEGDA含量增加,能释放更多的自由基,增加交联反应的活性和程度,使水凝胶形成更加致密的三维网络结构。并且GelMA/PEGDA交联水凝胶在37℃比GelMA交联水凝胶更加稳定。GelMA/PEGDA交联水凝胶将来有望成为组织工程的支架材料。     

Tunable Pentapeptide Self‐Assembled β‐Sheet Hydrogels

Oligopeptide‐based supramolecular hydrogels hold promise in a range of applications. The gelation of these systems is hard to control, with minor alterations in the peptide sequence significantly influencing the self‐assembly process. We explored three pentapeptide sequences with different charge distributions and discovered that they formed robust, pH‐responsive hydrogels. By altering the concentration and charge distribution of the peptide sequence, the stiffness of the hydrogels could be tuned across two orders of magnitude (2–200 kPa). Also, through reassembly of the β‐sheet interactions the hydrogels could self‐heal and they demonstrated shear‐thin behavior. Using spectroscopic and cryo‐imaging techniques, we investigated the relationship between peptide sequence and molecular structure, and how these influence the mechanical properties of the hydrogel. These pentapeptide hydrogels with tunable morphology and mechanical properties have promise in tissue engineering, injectable delivery vectors, and 3D printing applications.     

Ionically Modified Gelatin Hydrogels Maintain Murine Myogenic Cell Viability and Fusion Capacity

For tissue engineering of skeletal muscles, there is a need for biomaterials which do not only allow cell attachment, proliferation, and differentiation, but also support the physiological conditions of the tissue. Next to the chemical nature and structure of the biomaterial, its response to the application of biophysical stimuli, such as mechanical deformation or application of electrical pulses, can impact in vitro tissue culture. In this study, gelatin methacryloyl (GelMA) is modified with hydrophilic 2-acryloxyethyltrimethylammonium chloride (AETA) and 3-sulfopropyl acrylate potassium (SPA) ionic comonomers to obtain a piezoionic hydrogel. Rheology, mass swelling, gel fraction, and mechanical characteristics are determined. The piezoionic properties of the SPA and AETA-modified GelMA are confirmed by a significant increase in ionic conductivity and an electrical response as a function of mechanical stress. Murine myoblasts display a viability of >95% after 1 week on the piezoionic hydrogels, confirming their biocompatibility. The GelMA modifications do not influence the fusion capacity of the seeded myoblasts or myotube width after myotube formation. These results describe a novel functionalization providing new possibilities to exploit piezo-effects in the tissue engineering field.     

Covalent Incorporation of Heparin Improves Chondrogenesis in Photocurable Gelatin‐Methacryloyl Hydrogels

Multicomponent gelatin‐methacryloyl (GelMA) hydrogels are regularly adopted for cartilage tissue engineering (TE) applications, where optimizing chemical modifications for preserving biofunctionality is often overlooked. This study investigates the biological effect of two different modification methods, methacrylation and thiolation, to copolymerize GelMA and heparin. The native bioactivity of methacrylated heparin (HepMA) and thiolated heparin (HepSH) is evaluated via thromboplastin time and heparan sulfate‐deficient myeloid cell‐line proliferation assay, demonstrating that thiolation is superior for preserving anticoagulation and growth factor signaling capacity. Furthermore, incorporating either HepMA or HepSH in chondrocyte‐laden GelMA hydrogels, cultured for 5 weeks under chondrogenic conditions, promotes cell viability and chondrocyte phenotype. However, only GelMA‐HepSH hydrogels yield significantly greater differentiation and matrix deposition in vitro compared to GelMA. This study demonstrates that thiol‐ene chemistry offers a favorable strategy for incorporating bioactives into gelatin hydrogels as compared to methacrylation while furthermore highlighting GelMA‐HepSH hydrogels as candidates for cartilage TE applications.     

PEG–Anthracene Hydrogels as an On‐Demand Stiffening Matrix To Study Mechanobiology

There is a growing interest in materials that can dynamically change their properties in the presence of cells to study mechanobiology. Herein, we exploit the 365 nm light mediated [4+4] photodimerization of anthracene groups to develop cytocompatible PEG‐based hydrogels with tailorable initial moduli that can be further stiffened. A hydrogel formulation that can stiffen from 10 to 50 kPa, corresponding to the stiffness of a healthy and fibrotic heart, respectively, was prepared. This system was used to monitor the stiffness‐dependent localization of NFAT, a downstream target of intracellular calcium signaling using a reporter in live cardiac fibroblasts (CFbs). NFAT translocates to the nucleus of CFbs on stiffening hydrogels within 6 h, whereas it remains cytoplasmic when the CFbs are cultured on either 10 or 50 kPa static hydrogels. This finding demonstrates how dynamic changes in the mechanical properties of a material can reveal the kinetics of mechanoresponsive cell signaling pathways that may otherwise be missed in cells cultured on static substrates.     

Designing Gelatin Methacryloyl (GelMA)‐Based Bioinks for Visible Light Stereolithographic 3D Biofabrication

Bioinks play a key role in determining the capability of the biofabricatoin processes and the resolution of the printed constructs. Excellent biocompatibility, tunable physical properties, and ease of chemical or biological modifications of gelatin methacryloyl (GelMA) have made it an attractive choice as bioinks for biomanufacturing of various tissues or organs. However, the current preparation methods for GelMA‐based bioinks lack the ability to tailor their physical properties for desired bioprinting methods. Inherently, GelMA prepolymer solution exhibits a fast sol–gel transition at room temperature, which is a hurdle for its use in stereolithography (SLA) bioprinting. Here, synthesis parameters are optimized such as solvents, pH, and reaction time to develop GelMA bioinks which have a slow sol–gel transition at room temperature and visible light crosslinkable functions. A total of eight GelMA combinations are identified as suitable for digital light processing (DLP)‐based SLA (DLP‐SLA) bioprinting through systematic characterizations of their physical and rheological properties. Out of various types of GelMA, those synthesized in reverse osmosis (RO) purified water (referred to as RO‐GelMA) are regarded as most suitable to achieve high DLP‐SLA printing resolution. RO‐GelMA‐based bioinks are also found to be biocompatible showing high survival rates of encapsulated cells in the photocrosslinked gels. Additionally, the astrocytes and fibroblasts are observed to grow and integrate well within the bioprinted constructs. The bioink's superior physical and photocrosslinking properties offer pathways of tuning the scaffold microenvironment and highlight the applicability of developed GelMA bioinks in various tissue engineering and regenerative medicine applications.     

All‐in‐One Cellulose Nanocrystals for 3D Printing of Nanocomposite Hydrogels

Cellulose nanocrystals (CNCs) with >2000 photoactive groups on each can act as highly efficient initiators for radical polymerizations, cross‐linkers, as well as covalently embedded nanofillers for nanocomposite hydrogels. This is achieved by a simple and reliable method for surface modification of CNCs with a photoactive bis(acyl)phosphane oxide derivative. Shape‐persistent and free‐standing 3D structured objects were printed with a mono‐functional methacrylate, showing a superior swelling capacity and improved mechanical properties.     

pH‐Sensitive Mechanical Properties of Elastin‐Based Hydrogels

Ionizable amino acids in protein‐based hydrogels can confer pH‐responsive behavior. Because elastin‐like polypeptides (ELPs) have an established sequence and can crosslink to form hydrogels, they are an ideal system for creating pH‐sensitive materials. This study examines different parameters that might affect pH‐sensitive behavior and characterizes the mechanical and physical properties between pH 3 and 11 of three ELP‐based crosslinked hydrogels. The first finding is that varying the amount of crosslinker affects the overall stiffness and resilience of the hydrogels but does not strongly affect water content, swelling ratio, or pH sensitivity. Second, the choice of two popular tag sequences, which vary in histidine and aspartic acid content, does not have a strong effect on pH‐sensitive properties. Last, selectively blocking lysine and tyrosine residues through acetylation significantly decreases the pH‐sensitive zeta potential. Acetylated hydrogels also demonstrate different behavior at low pH values with reduced swelling, reduced water content, and higher stiffness. Overall, this work demonstrates that ELP hydrogels with ionizable groups are promising materials for environmentally‐responsive applications such as drug delivery, tissue engineering, and microfluidics.     

Drug‐Loaded Elastin‐Like Polypeptide–Collagen Hydrogels with High Modulus for Bone Tissue Engineering

Emphasizing the role of hydrogel stiffness and cellular differentiation, this study develops collagen and elastin‐like polypeptide (ELP)–based bone regenerative hydrogels loaded with recombinant human bone morphogenetic protein‐2 (rhBMP‐2) and doxycycline with mechanical properties suitable for osteogenesis. The drug‐incorporated collagen–ELP hydrogels has significantly higher modulus of 35 ± 5 kPa compared to collagen‐only hydrogels. Doxycycline shows a bi‐phasic release with an initial burst release followed by a gradual release, while rhBMP‐2 exhibits a nearly linear release profile for all hydrogels. The released doxycycline shows anti‐microbial activity against Pseudomonas aeruginosa, Streptococcus sanguinis, and Escherichia coli. Microscopic observation of the hydrogels reveals their interconnected, macroporous, 3D open architecture with pore diameters between 160 and 400 µm. This architecture supports human adipose–derived stem cell attachment and proliferation from initial days of cell seeding, forming a thick cellular sheath by day 21. Interestingly, in collagen and collagen–ELP hydrogels, cell morphology is elongated with stretched slender lamellipodial formation, while cells assemble as spheroidal aggregates in crosslinked as well as drug‐loaded hydrogels. Osteogenic markers, alkaline phosphatase and osteocalcin, are expressed maximally for drug‐loaded hydrogels compared to those without drugs. The drug‐loaded collagen–ELP hydrogels are thus promising for combating bacterial infection and promoting guided bone regeneration.     

Creating Complex Polyacrylamide Hydrogel Structures Using 3D Printing with Applications to Mechanobiology

Due to its favorable physical and chemical properties, including chemical inertness, low fouling by biological molecules, high porosity and permeability, optical transparency, and adjustable elasticity, polyacrylamide has found a wide range of biomedical and non‐biomedical applications. To further increase its versatility, this communication describes a simple method, using readily available reagents and equipment, for 3D printing polyacrylamide hydrogels at a resolution of 100–150 μm to create complex structures. As a demonstration of the application, the method is used for creating a lab‐on‐a‐chip cell culture surface with micropatterned stiffness, which then leads to the discovery of stiffness‐guided collective cell segregation distinct from durotaxis. The present technology is expected to unleash new applications such as the construction of biocompatible elastic medical devices and artificial organs.     

Hydrogels with Dynamically Controllable Mechanics and Biochemistry for 3D Cell Culture Platforms

Many cell-matrix interaction studies have proved that dynamic changes in the extracellular matrix(ECM)are crucial to maintain cellular properties and behaviors.Thus,developing materials that can recapitulate the dynamic attributes of the ECM is highly desired for threedimensional(3 D)cell culture platforms.To this end,we sought to develop a hydrogel system that would enable dynamic and reversible turning of its mechanical and biochemical properties,thus facilitating the control of cell culture to imitate the natural ECM.Herein,a hydrogel with dynamic mechanics and a biochemistry based on an addition-fragmentation chain transfer(AFCT)reaction was constructed.Thiol-modified hyaluronic acid(HA)and allyl sulfide-modifiedε-poly-L-lysine(EPL)were synthesized to form hydrogels,which were non-swellable and biocompatible.The reversible modulus of the hydrogel was first achieved through the AFCT reaction;the modulus can also be regulated stepwise by changing the dose of UVA irradiation.Dynamic patterning of fluorescent markers in the hydrogel was also realized.Therefore,this dynamically controllable hydrogel has great potential as a 3 D cell culture platform for tissue engineering applications.     

Gelatin methacrylate as a promising hydrogel for 3D microscale organization and proliferation of dielectrophoretically patterned cells

Establishing the 3D microscale organization of cells has numerous practical applications, such as in determining cell fate (e.g., proliferation, migration, differentiation, and apoptosis) and in making functional tissue constructs. One approach to spatially pattern cells is by dielectrophoresis (DEP). DEP has characteristics that are important for cell manipulation, such as high accuracy, speed, scalability, and the ability to handle both adherent and non-adherent cells. However, widespread application of this method is largely restricted because there is a limited number of suitable hydrogels for cell encapsulation. To date, polyethylene glycol-diacrylate (PEG-DA) and agarose have been used extensively for dielectric patterning of cells. In this study, we propose gelatin methacrylate (GelMA) as a promising hydrogel for use in cell dielectropatterning because of its biocompatibility and low viscosity. Compared to PEG hydrogels, GelMA hydrogels showed superior performance when making cell patterns for myoblast (C2C12) and endothelial (HUVEC) cells as well as in maintaining cell viability and growth. We also developed a simple and robust protocol for co-culture of these cells. Combined application of the GelMA hydrogels and the DEP technique is suitable for creating highly complex microscale tissues with important applications in fundamental cell biology and regenerative medicine in a rapid, accurate, and scalable manner.