甲基丙烯酰胺基明胶水凝胶研究进展

甲基丙烯酰胺基明胶(GelMA)水凝胶的制备及其在生物医学领域的应用是最近十几年的研究热点。GelMA水凝胶因其独特的光致交联特性,可以加工成不同形貌的水凝胶支架材料,同时,因其具有可控的力学性能、降解性能,以及优秀的生物相容性,已成为具有广泛应用前景的生物高分子聚合物材料。本文主要介绍了GelMA水凝胶在止血材料、创伤敷料、组织工程支架、药物控释、骨缺损修复等领域的研究进展。     

Photo‐crosslinkable hydrogel‐based 3D microfluidic culture device

We developed the photo‐crosslinkable hydrogel‐based 3D microfluidic device to culture neural stem cells (NSCs) and tumors. The photo‐crosslinkable gelatin methacrylate (GelMA) polymer was used as a physical barrier in the microfluidic device and collagen type I gel was employed to culture NSCs in a 3D manner. We demonstrated that the pore size was inversely proportional to concentrations of GelMA hydrogels, showing the pore sizes of 5 and 25 w/v% GelMA hydrogels were 34 and 4 μm, respectively. It also revealed that the morphology of pores in 5 w/v% GelMA hydrogels was elliptical shape, whereas we observed circular‐shaped pores in 25 w/v% GelMA hydrogels. To culture NSCs and tumors in the 3D microfluidic device, we investigated the molecular diffusion properties across GelMA hydrogels, indicating that 25 w/v% GelMA hydrogels inhibited the molecular diffusion for 6 days in the 3D microfluidic device. In contrast, the chemicals were diffused in 5 w/v% GelMA hydrogels. Finally, we cultured NSCs and tumors in the hydrogel‐based 3D microfluidic device, showing that 53–75% NSCs differentiated into neurons, while tumors were cultured in the collagen gels. Therefore, this photo‐crosslinkable hydrogel‐based 3D microfluidic culture device could be a potentially powerful tool for regenerative tissue engineering applications.     

紫外光共聚交联制备GelMA/PEGDA水凝胶

为避免物理交联明胶基水凝胶的热不稳定性,以及化学方法交联明胶基水凝胶存在的毒性,本文采用丙烯酰化的方法将甲基丙烯酸酐(MA)与明胶反应,在明胶分子链上引入双键结构,并且实现了紫外光照射引发甲基丙烯酰胺基明胶(GelMA)与聚乙二醇双丙烯酸酯(PEGDA)共聚交联制备水凝胶。研究了不同的MA加入量对明胶修饰度的影响,并对GelMA/PEGDA交联水凝胶理化性质进行了测试和分析。结果表明:体系中PEGDA含量增加,能释放更多的自由基,增加交联反应的活性和程度,使水凝胶形成更加致密的三维网络结构。并且GelMA/PEGDA交联水凝胶在37℃比GelMA交联水凝胶更加稳定。GelMA/PEGDA交联水凝胶将来有望成为组织工程的支架材料。     

A Polysaccharide-based Hydrogel and PLGA Microspheres for Sustained P24 Peptide Delivery: An In vitro and In vivo Study Based on Osteogenic Capability

A bone morphogenetic protein-2(BMP-2) derived synthetic oligopeptide, S [PO4]KIPKASSVPTELSAISTLYLDDD(P24), has shown great potential for facilitating bone regeneration. However, P24 cannot be directly used onto bone defects, while a continuous sustained delivery of P24 may lead to a better formation of bone tissue. Based on this issue, we have developed a sustained delivery system incorporating P24-loaded poly(lactide-co-glycolide)(PLGA) microspheres and nano-hydroxyapatite(n-HA) into the composite hydrogel. The P24-contained compound material was characterized with NMR, FTIR and SEM to demonstrate the fomiation of compound structure containing P24, PLGA and n-HA. A continuous drug release of P24 was observed for over 60 d that evidently enhanced the efficiency in promoting the proliferation of MC3T3-E1 cells and the secrete of alkaline phosphatase(ALP) in vitro. Moreover, the osteoinduction eflect of the hydrogel system with P24 peptide niicrospheres was demonstrated in vivo and manifested by the result of immunohistochemistry. This novel injectable composite hydrogel is expected to be applied to improving the bone defect treatment in bone tissue engineering.     

Multifunctional Antioxidants: Regenerable Radical‐Trapping and Hydroperoxide‐Decomposing Ebselenols

Regenerable, multifunctional ebselenol antioxidants were prepared that could quench peroxyl radicals more efficiently than α‐tocopherol. These compounds act as better mimics of the glutathione peroxidase enzymes than ebselen. Production of reactive oxygen species (ROS) and reactive nitrogen species (RNS) in human mononuclear cells was considerably decreased upon exposure to the organoselenium compounds. At a concentration of 25 μm , the ebselenol derivatives showed minimal toxicity in pre‐osteoblast MC3T3 cells.     

Photo‐Modulated Therapeutic Protein Release from a Hydrogel Depot Using Visible Light

The use of biomacromolecular therapeutics has revolutionized disease treatment, but frequent injections are required owing to their short half‐life in vivo. Thus there is a need for a drug delivery system that acts as a reservoir and releases the drug remotely “on demand”. Here we demonstrate a simple light‐triggered local drug delivery system through photo‐thermal interactions of polymer‐coated gold nanoparticles (AuNPs) inside an agarose hydrogel as therapeutic depot. Localized temperature increase induced by the visible light exposure caused reversible softening of the hydrogel matrix to release the pre‐loaded therapeutics. The release profile can be adjusted by AuNPs and agarose concentrations, light intensity and exposure time. Importantly, the biological activity of the released bevacizumab was highly retained. In this study we demonstrate the potential application of this facile AuNPs/hydrogel system for ocular therapeutics delivery through its versatility to release multiple biologics, compatibility to ocular cells and spatiotemporal control using visible light.     

A 3D Bioprinted Nanoengineered Hydrogel with Photoactivated Drug Delivery for Tumor Apoptosis and Simultaneous Bone Regeneration via Macrophage Immunomodulation

One of the significant challenges in bone tissue engineering (BTE) is the healing of traumatic tissue defects owing to the recruitment of local infection and delayed angiogenesis. Herein, a 3D printable multi-functional hydrogel composing polyphenolic carbon quantum dots (CQDs, 100 µg mL⁻¹) and gelatin methacryloyl (GelMA, 12 wt%) is reported for robust angiogenesis, bone regeneration and anti-tumor therapy. The CQDs are synthesized from a plant-inspired bioactive molecule, 1, 3, 5-trihydroxybenzene. The 3D printed GelMA-CQDs hydrogels display typical shear-thinning behavior with excellent printability. The fabricated hydrogel displayed M2 polarization of macrophage (Raw 264.7) cells via enhancing anti-inflammatory genes (e.g., IL-4 and IL10), and induced angiogenesis and osteogenesis of human bone mesenchymal stem cells (hBMSCs). The bioprinted hBMSCs are able to produce vessel-like structures after 14 d of incubation. Furthermore, the 3D printed hydrogel scaffolds also show remarkable near infra-red (NIR) responsive properties under 808 nm NIR light (1.0 W cm⁻²) irradiation with controlled release of antitumor drugs (≈49%) at pH 6.5, and thereby killing the osteosarcoma cells. Therefore, it is anticipated that the tissue regeneration and healing ability with therapeutic potential of the GelMA-CQDs scaffolds may provide a promising alternative for traumatic tissue regeneration via augmenting angiogenesis and accelerated immunomodulation.     

Hydrogel microfluidic co‐culture device for photothermal therapy and cancer migration

We developed the photo‐crosslinkable hydrogel microfluidic co‐culture device to study photothermal therapy and cancer cell migration. To culture MCF7 human breast carcinoma cells and metastatic U87MG human glioblastoma in the microfluidic device, we used 10 w/v% gelatin methacrylate (GelMA) hydrogels as a semi‐permeable physical barrier. We demonstrated the effect of gold nanorod on photothermal therapy of cancer cells in the microfluidic co‐culture device. Interestingly, we observed that metastatic U87MG human glioblastoma largely migrated toward vascular endothelial growth factor (VEGF)‐treated GelMA hydrogel‐embedding microchannels. The main advantage of this hydrogel microfluidic co‐culture device is to simultaneously analyze the physiological migration behaviors of two cancer cells with different physiochemical motilities and study gold nanorod‐mediated photothermal therapy effect. Therefore, this hydrogel microfluidic co‐culture device could be a potentially powerful tool for photothermal therapy and cancer cell migration applications.     

Polymeric Nanoformulation of Zoledronic Acid Rescues Osteoblasts from the Harmful Effect of its Native Form: An In Vitro Investigation of Cytotoxic Potential on Osteoblasts and Osteosarcoma Cells

Osteosarcoma (OS) is a malignant tumor, fatal for pediatric patients who do not respond to chemotherapy, alternative therapies and drugs can provide better outcomes. Zoledronic acid (Zol) belonging to the class of bisphosphonates (BPs) has a direct antitumor ability to prevent Ras GTPases modification and stimulate apoptosis. Despite advances in maintaining balance in skeletal events and direct anticancer properties, Zol causes cytotoxicity to normal healthy pre-osteoblast cells, hampering mineralization and differentiation. The study reports the preparation and evaluation of a nanoformulation that can diminish the existing drawbacks of native Zol. The cytotoxic effect is evaluated on bone cancer cells and healthy bone cells with three different cell lines namely, K7M2 (mouse OS cell line), SaOS2 (human OS cell line), and MC3T3E1 (healthy cell counterpart). It is observed that Zol nanoformulation is uptaken more (95%) in K7M2 whereas in MC3T3E1, the percent population internalizing nanoparticles (NPs) is 45%. Zol has a sustained release of 15% after 96 h from the NP which leads to a rescuing effect on the normal pre-osteoblast cells. In conclusion, it can be stated that Zol nanoformulation can be used as a good platform for a sustained release system with minimum side effects to normal bone cells.     

Sonochemical Degradation of Gelatin Methacryloyl to Control Viscoelasticity for Inkjet Bioprinting

Inkjet printing enables the mimicry of the microenvironment of natural complex tissues by patterning cells and hydrogels at a high resolution. However, the polymer content of an inkjet-printable bioink is limited as it leads to strong viscoelasticity in the inkjet nozzle. Here it is demonstrated that sonochemical treatment controls the viscoelasticity of a gelatin methacryloyl (GelMA) based bioink by shortening the length of polymer chains without causing chemical destruction of the methacryloyl groups. The rheological properties of treated GelMA inks are evaluated by a piezo-axial vibrator over a wide range of frequencies between 10 and 10 000 Hz. This approach enables to effectively increase the maximum printable polymer concentration from 3% to 10%. Then it is studied how the sonochemical treatment effectively controls the microstructure and mechanical properties of GelMA hydrogel constructs after crosslinking while maintaining its fluid properties within the printable range. The control of mechanical properties of GelMA hydrogels can lead fibroblasts more spreading on the hydrogels. A 3D cell-laden multilayered hydrogel constructs containing layers with different physical properties is fabrictated by using high-resolution inkjet printing. The sonochemical treatment delivers a new path to inkjet bioprinting to build microarchitectures with various physical properties by expanding the range of applicable bioinks.     

Thermoresponsive drug controlled release from chitosan‐based hydrogel embedded with poly(N‐isopropylacrylamide) nanogels

A facile synthetic strategy was developed for the preparation of thermoresponsive nanocomposite hydrogels comprising crosslinked chitosan (CS) networks and poly(N‐isopropylacrylamide) [p(NIPAAm)] nanogels. First, thermoresponsive p(NIPAAm) nanogels were synthesized via emulsion polymerization. The p(NIPAAm) nanogels were introduced into methacrylamide CS (MC) solution and the free‐radical initiated crosslinking reaction of MC produced nanogel‐embedded hydrogels. The last step involves the loading of the antibacterial model drug levofloxacin (LFX) into the prepared nanocomposite hydrogels by allowing the preformed hydrogels to swell to equilibrium in the drug's aqueous solution. The integration of p(NIPAAm) nanogel into CS networks facilitates thermoresponsive release of LFX with an enhancement of the drug‐loading capacity within the hydrogel. Notably, thermoresponsive drug‐release was achieved without unwarranted modification of the hydrogel's dimension and shape, although an increase in temperature caused the collapse of the p(NIPAAm) nanogels. The thermoresponsive property of the investigated nanocomposite hydrogel is beneficial and may offer broad opportunities for drug temperature‐triggered release for clinical applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1907–1914     

Developing a Novel Platelet-Rich Plasma-Laden Bioadhesive Hydrogel Contact Lens for the Treatment of Ocular Surface Chemical Injuries

Permanent injury to corneal limbal stem cells after ocular surface chemical and thermal injuries is a major cause of corneal blindness. In this study, a PRP-laden GelMA hydrogel contact lens is manufactured which is aimed to support the limbal niche after ocular surface insults thereby preventing limbal stem cell failure. GelMA with varying platelet-rich plasma (PRP) concentrations (5%, 10%, and 20%) is photopolymerized using a visible light crosslinking system followed by characterizations of mechanical properties, growth factor release, enzymatic degradation, and in vitro cytotoxicity. The addition of 10% PRP into 10% GelMA hydrogel precursor solution results in the highest tensile and compressive modulus (38 and 110 kPa, respectively) and burst pressure (251±37.66 mmHg). Degradation time varies according to the concentration of the collagenase enzyme tested (0, 2.5, 5, and 40 µg/mL) and is most prolonged with 20% PRP. EGF and TGF-β release profiles suggest an initial burst release followed by sustained release, most consistent in the 10% PRP sample. Although cell viability decreases on day 1, rapid recovery is observed and is approximately 120% after day 21. PRP-laden GelMA in the form of a contact lens may be a promising biomaterial-based treatment approach for the maintenance of limbal epithelial stem cells after ocular surface insults.     

Dual Therapy Coating on Micro/Nanoscale Porous Polyetheretherketone to Eradicate Biofilms and Accelerate Bone Tissue Repair

Defective osteogenesis and latent infections continue to be two major issues in the therapy of bone tissue regeneration. In this study, a unique hierarchically micro/nanoscale‐architecture is first proposed and produced on polyetheretherketone (PEEK). Besides, a “simvastatin‐PLLA film‐tobramycin microspheres” delivery system is subsequently fabricated to endow the PEEK implant with osteogenic and antibacterial capabilities. In vitro antibacterial evaluations confirm that the decorated PEEK scaffolds possess excellent resistance against planktonic/adherent bacteria. In vitro cell attachment/proliferation, lactate dehydrogenase (LDH) content, alkaline phosphatase (ALP) activity, calcium mineral deposition experiments, and real‐time PCR analysis all exhibit that the superior proliferation rate and osteo‐differentiation potential of MC3T3‐E1 pre‐osteoblasts are presented on the PEEK samples with dual functional decoration. In the mouse calvarial defect model, the micro‐CT and histological results demonstrate that our scaffolds display a remarkable bone forming capability. Generally, the PEEK scaffolds co‐endowed with simvastatin and tobramycin microspheres possess great potential in clinics.     

Simple Radical Polymerization of Poly(Alginate‐Graft‐N‐Isopropylacrylamide) Injectable Thermoresponsive Hydrogel with the Potential for Localized and Sustained Delivery of Stem Cells and Bioactive Molecules

In this study, thermoresponsive copolymers that are fully injectable, biocompatible, and biodegradable and are synthesized via graft copolymerization of poly(N‐isopropylacrylamide) onto alginate using a free‐radical reaction are presented. This new synthesis method does not involve multisteps or associated toxicity issues, and has the potential to reduce scale‐up difficulties. Chemical and physical analyses verify the resultant graft copolymer structure. The lower critical solution temperature, which is a characteristic of sol–gel transition, is observed at 32 °C. The degradation properties indicate suitable degradation kinetics for drug delivery and bone tissue engineering applications. The synthesized P(Alg‐g‐NIPAAm) hydrogel is noncytotoxic with both human osteosarcoma (MG63) cells and porcine bone marrow derived mesenchymal stem cells (pBMSCs). pBMSCs encapsulated in the P(Alg‐g‐NIPAAm) hydrogel remain viable, show uniform distribution within the injected hydrogel, and undergo osteogenic and chondrogenic differentiation under appropriate culture conditions. Furthermore, for the first time, this work will explore the influence of alginate viscosity on the viscoelastic properties of the resulting copolymer hydrogels, which influences the rate of medical device formation and subsequent drug release. Together the results of this study indicate that the newly synthesized P(Alg‐g‐NIPAAm) hydrogel has potential to serve as a versatile and improved injectable platform for drug delivery and bone tissue engineering applications.     

载药脂质体复合缺钙磷灰石骨水泥支架的研究

采用食盐颗粒浸出法制备了缺钙磷灰石水泥(CPC)多孔支架;用脂质体包裹盐酸万古霉素制备了载药脂质体。将它们两者结合,制备了脂质体载药复合缺钙磷灰石水泥(dl-CPC)支架。结果表明:缺钙CPC多孔支架能够将载药脂质体吸附在其大孔表面或微孔里;dl-CPC支架对MC3T3-E1细胞的生长没有负面影响,显示出良好的细胞相容性。此外,dl-CPC支架具有很好的抗菌性能,能够抑制大肠杆菌生长,抗菌率达99%(12 h)。dl-CPC支架浸泡在磷酸缓冲溶液中,释放药物的速度比较缓慢(前4周);而直接吸附药物的CPC支架,在1周内大部分药物释放出来,出现暴释现象。另结果表明:dl-CPC支架具有缓释药物和骨再生的双重功能,可用于骨缺损的修复及治疗慢性骨髓炎。     

An Injectable,Bifunctional Hydrogel with Photothermal Effects for Tumor Therapy and Bone Regeneration

Significant attention has been focused on bone tumor therapy recently. At present, the treatment in clinic typically requires surgical intervention. However, a few tumor cells remain around bone defects after surgery and subsequently proliferate within several days. Thus, fabrication of biomaterials with dual functions of tumor therapy and bone regeneration is significant. Herein, the injectable hydrogel containing cisplatin (DDP) and polydopamine‐decorated nano‐hydroxyapatite is prepared via Schiff base reaction between the aldehyde groups on oxidized sodium alginate and amino groups on chitosan. The hydrogel exhibits sustained release properties for DDP due to the immobilization of DDP via abundant functional groups on polydopamine (PDA). Additionally, given the intense absorption of PDA in the near‐infrared region, the hydrogel exhibits excellent photothermal effects when exposed to the NIR laser (808 nm). Based on the properties, the hydrogel effectively ablates tumor cells (4T1 cells) in vitro and suppresses tumor growth in vivo. Furthermore, the hydrogel promotes the adhesion and proliferation of bone mesenchymal stem cells in vitro due to the abundant functional groups on PDA and further induces bone regeneration in vivo. Therefore, the study extends research on novel biomaterials with dual functions of tumor therapy and bone regeneration.     

Drug‐Loaded Elastin‐Like Polypeptide–Collagen Hydrogels with High Modulus for Bone Tissue Engineering

Emphasizing the role of hydrogel stiffness and cellular differentiation, this study develops collagen and elastin‐like polypeptide (ELP)–based bone regenerative hydrogels loaded with recombinant human bone morphogenetic protein‐2 (rhBMP‐2) and doxycycline with mechanical properties suitable for osteogenesis. The drug‐incorporated collagen–ELP hydrogels has significantly higher modulus of 35 ± 5 kPa compared to collagen‐only hydrogels. Doxycycline shows a bi‐phasic release with an initial burst release followed by a gradual release, while rhBMP‐2 exhibits a nearly linear release profile for all hydrogels. The released doxycycline shows anti‐microbial activity against Pseudomonas aeruginosa, Streptococcus sanguinis, and Escherichia coli. Microscopic observation of the hydrogels reveals their interconnected, macroporous, 3D open architecture with pore diameters between 160 and 400 µm. This architecture supports human adipose–derived stem cell attachment and proliferation from initial days of cell seeding, forming a thick cellular sheath by day 21. Interestingly, in collagen and collagen–ELP hydrogels, cell morphology is elongated with stretched slender lamellipodial formation, while cells assemble as spheroidal aggregates in crosslinked as well as drug‐loaded hydrogels. Osteogenic markers, alkaline phosphatase and osteocalcin, are expressed maximally for drug‐loaded hydrogels compared to those without drugs. The drug‐loaded collagen–ELP hydrogels are thus promising for combating bacterial infection and promoting guided bone regeneration.     

Orthogonal Enzymatic Reactions to Control Supramolecular Hydrogelations

Enzyme‐responsive hydrogels have great potential in applications of controlled drug release, tissue engineering, etc. In this study, we reported on a supramolecular hydrogel that showed responses to two enzymes, phosphatase which was used to form the hydrogels and esterase which could trigger gel‐sol phase transitions. The gelation process and visco‐elasticity property of the resulting gel, morphology of the nanostructures in hydrogel, and peptide conformation in the self‐assembled nanostructure were characterized by rheology, transmission electron microscope (TEM), and circular dichroism (CD), respectively. Potential application of the enzyme‐responsive hydrogel in drug release was also demonstrated in this study. Though only one potential application of drug release was proved in this study, the responsive hydrogel system in this study might have potentials for the applications in fields of cell culture, controlled‐drug release, etc.     

Dual crosslinked pH‐ and temperature‐sensitive hydrogel beads for intestine‐targeted controlled release

Novel drug‐loaded hydrogel beads for intestine‐targeted controlled release were developed by using pH‐ and temperature‐sensitive carboxymethyl chitosan‐graft‐poly(N,N‐diethylacrylamide) (CMCTS‐g‐PDEA) hydrogel as carriers and vitamin B₂ (VB₂) as a model drug. The hydrogel beads were prepared based on Ca²⁺ ionic crosslinking in acidic solution and formed dual crosslinked network structure. The structure of hydrogel and morphology of drug‐loaded beads were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The study about swelling characteristics of hydrogel beads indicated that the beads had obvious pH‐ and temperature‐sensitivity. In vitro release studies of drug‐loaded beads were carried out in pH 1.2 HCl buffer solution and pH 7.4 phosphate buffer solution at 37°C, respectively. The results indicated that the dual crosslinked method could effectively control the drug release rate under gastrointestinal tract (GIT) conditions, which was superior to traditional single crosslinked beads. In addition, the effects of grafting percentage, pH value, and temperature on the release behavior of the VB₂ were investigated. The drug release mechanism of CMCTS‐g‐PDEA drug‐loaded beads was analyzed by Peppa's potential equation. According to this study, the dual crosslinked hydrogel beads based on CMCTS‐g‐PDEA could serve as suitable candidate for drug site‐specific carrier in intestine. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,characterization and biological properties of vanadyl(IV) complexes of diclofenac and indomethacin: an experimental and theoretical study

Two new vanadyl(IV) complexes with the non‐steroidal antiinflammatory drugs Indomethacin and Diclofenac were synthesized and characterized by elemental analysis, electronic, diffuse reflectance and FTIR spectroscopies and thermal behavior. The structures of the oxo‐vanadium(IV) complexes were obtained by carrying out ab initio calculations (B3LY/3–21G**) owing to the difficulties of obtaining single crystals of good quality for X‐ray studies. Indomethacin and Diclofenac did not cause any effect when tested on cellular proliferation in two osteoblast‐cell lines in culture (MC3T3E1 and UMR106). The biological effect of the complexes depends on the cellular type and on the nature of the coordinated ligands. Copyright © 2005 John Wiley & Sons, Ltd.