Self-assembled monolayer of an iron(III) porphyrin disulphide derivative on gold

A novel iron(III) porphyrin disulphide derivative have been successfully immobilised on gold surfaces by self-assembly. The redox response of the modified electrodes was compared with the obtained for a similar iron porphyrin in solution, confirming the immobilisation of the metalloporphyrin. The gravimetric data obtained by electrochemical quartz crystal microbalance (EQCM) during adsorption allowed an estimation of the electrode coverage, providing further evidence for the formation of the porphyrin SAM. The modified electrodes were also measured by conventional and imaging ellipsometry. The electrocatalytic activity of the two modified electrodes was tested for the reduction of the molecular oxygen.     

Electrochemical Behaviour of HOPG and CVD‐Grown Graphene Electrodes Modified with Thick Anthraquinone Films by Diazonium Reduction

Highly oriented pyrolytic graphite (HOPG) and graphene grown on Ni (Ni‐Gra) or Cu (Cu‐Gra) by chemical vapour deposition were modified with thick anthraquinone (AQ) films (7?60 nm) by redox grafting of the pertinent diazonium salt. Glassy carbon (GC) electrodes were used for comparison. The AQ‐modified GC electrodes showed excellent blocking properties towards the Fe(CN)₆^3?/4? redox probe, although it was noted that in the case of Ni‐Gra and Cu‐Gra, the blocking ability depended strongly on the underlying substrate. Oxygen reduction studies revealed good electrocatalytic activity of AQ‐modified HOPG, Ni‐Gra, and Cu‐Gra, compared with the bare electrodes.     

Electroreduction of Oxygen and Electrooxidation of Methanol at Carbon and Single Wall Carbon Nanotube Supported Platinum Electrodes

The present research aimed at investigating the electrocatalytic properties and the electrochemical deposition of Pt nanoparticles on carbon powder, carbon nanotube and preparation of carbon and single wall carbon nanotube supported platinum electrodes. The Pt nanoparticles were synthesized by electroreduction of hexachloroplatinic acid in aqueous solution at ?200 mV. Electrocatalytic properties of the modified electrodes for oxygen reduction were investigated by cyclic voltammetry in O₂ saturated solution containing 0.1 M HClO₄. Methanol electrooxidation at the modified surfaces in 0.5 M HCLO₄ was studied by cyclic voltammetry. The corresponding results showed that the Pt/SWCNT/GC electrode exhibits more improved catalytical activity than the Pt/C/GC electrode.     

A Comparative Study of the Modification of Gold and Glassy Carbon Surfaces with Mixed Layers of In Situ Generated Aryl Diazonium Compounds

In situ generated aryl diazonium cations were synthesized in the electrochemical cell by reaction of the corresponding amines with NaNO₂ in aqueous HCl. This paper reports a study of the formation of mixed layers from in situ generated aryl diazonium cations. Firstly, glassy carbon (GC) and gold electrode surfaces were modified with five single in situ generated aryl diazonium salts to obtain their corresponding reductive potential followed by the modification of GC and gold surfaces with eight binary mixed layers of in situ generated aryl diazonium salts. The difference between GC and gold surfaces in terms of in situ formation of two‐component aryl diazonium salt films was compared. The behavior of the mixed layers formed from in situ generated aryl diazonium salts relative to diazonium salts that were pre‐synthesized prior to surface modification was also investigated. Cyclic voltammetry and X‐ray photoelectron spectroscopy were used to characterize the resulting modified GC and gold surfaces. It is found that for some aryl diazonium salts the potential at which reductive adsorption is achieved on gold and GC surfaces is significantly different. For the eight sets of binary mixed layers, the species with more anodic potential are more difficult to attach to the both GC and gold surfaces. The behavior of the mixed layers formed from in situ generated aryl diazonium salts and the pre‐synthesized diazonium salts is similar; which emphasizes the advantage of the in situ approach without any apparent difference in behavior to the presynthesized diazonium salts.     

Electrocatalytic Reduction of Dioxygen on the Surface of Glassy Carbon Electrodes Modified with Cobalt Porphyrin Complexes

The preparation and electrocatalytic behavior of glassy carbon electrodes modified with three different cobalt porphyrin complexes were investigated. The electrocatalytic ability of the modified electrodes for the reduction of dioxygen to hydrogen peroxide and water in air‐saturated aqueous solutions was examined by cyclic voltammetry and chronoamperometry techniques. The porphyrin‐adsorbed glassy carbon electrodes possess excellent electrocatalytic abilities for dioxygen reduction with overpotential about 0.5 V lower than that at a plain glassy carbon electrode. The experimental parameters were optimized and the mechanism of the catalytic process was discussed. The possible effects of the electron‐donating properties of groups in the meso‐position of the porphyrin ring were investigated.     

Electropolymerization of iron tetra(<Emphasis Type="Italic">o</Emphasis>-aminophenyl)porphyrin from aqueous solution and the electrocatalytic behavior of modified electrode

Stable electroactive iron tetra(o-aminophenyl)porphyrin (FeTAPP) films are prepared by electropolymerization from aqueous solution by cycling the electrode potential between −0.4 and 1.0 V vs Ag/AgCl at 0.1 V s⁻¹. The cyclic voltammetric response indicates that polymerization takes place after the oxidation of amino groups, and the films could be produced on glassy carbon (GC) and gold electrodes. The film growth of poly(FeTAPP) was monitored by using cyclic voltammetry and electrochemical quartz crystal microbalance. The cyclic voltammetric features of Fe(III)/Fe(II) redox couple in the film resembles that of surface confined redox species. The electrochemical response of the modified electrode was found to be dependent on the pH of the contacting solution with a negative shift of 57 mV/pH. The electrocatalytic behavior of poly(FeTAPP) film-modified electrode was investigated towards reduction of hydrogen peroxide, molecular oxygen, and chloroacetic acids (mono-, di-, and tri-). The reduction of hydrogen peroxide, molecular oxygen, and dichloroacetic acid occurred at less negative potential on poly(FeTAPP) film compared to bare GC electrode. Particularly, the overpotential of hydrogen peroxide was reduced substantially. The O₂ reduction proceeds through direct four-electron reduction mechanism.     

Grafted Azure A modified electrodes as disposable β-nicotinamide adenine dinucleotide sensors

We report the in situ generation of aryl diazonium cations of Azure A, a redox-active phenothiazine dye, by reaction between the corresponding aromatic aminophenyl group and sodium nitrite in 0.1 M HCl. The subsequent electrochemical reduction of these dye diazonium salts gives rise to conductive electrografted films onto screen-printed carbon (SPC) electrodes. The resulting Azure A films have a very stable and reversible electrochemical response and exhibit potent and persistent electrocatalytic behavior toward NADH oxidation. We have optimized the electrografting conditions in order to obtain SPC modified electrodes with high and stable electrocatalytic response. The kinetic of the reaction between the NADH and the redox active centers in the Azure A film has been characterized using cyclic voltammetry and single step chronoamperometry. The catalytic currents were proportional to the concentration of NADH giving rise to linear calibration plots up to a concentration of 0.5 mM with a detection limit of 0.57 ± 0.03 μM and a sensitivity of 9.48 A mol cm⁻² μM⁻¹. The precision of chronoamperometric determinations was found to be 2.3% for five replicate determinations of 3.95 μM NADH. The great stability of such modified electrodes makes them ideal for their application in the development of biosensing platforms based on dehydrogenases.     

Heat‐Treated Aerogel as a Catalyst for the Oxygen Reduction Reaction

Aerogels are fascinating materials that can be used for a wide range of applications, one of which is electrocatalysis of the important oxygen reduction reaction. In their inorganic form, aerogels can have ultrahigh catalytic site density, high surface area, and tunable physical properties and chemical structures—important features in heterogeneous catalysis. Herein, we report on the synthesis and electrocatalytic properties of an iron–porphyrin aerogel. 5,10,15,20‐(Tetra‐4‐aminophenyl)porphyrin (H₂TAPP) and Fe^II were used as building blocks of the aerogel, which was later heat‐treated at 600 °C to enhance electronic conductivity and catalytic activity, while preserving its macrostructure. The resulting material has a very high concentration of atomically dispersed catalytic sites (9.7×10²⁰ sites g^?1) capable of catalyzing the oxygen reduction reaction in alkaline solution (E_onset=0.92 V vs. RHE, TOF=0.25 e^? site^?1 s^?1 at 0.80 V vs. RHE).     

The electrocatalytic reactions of adenine, guanine, H2O, H2O2, N2H4, and l -cysteine catalyzed by poly(Ni(4-TMPyP)) film-modified electrodes

Electrochemical preparation of poly(nickel tetrakis(N-methyl-4-pyridyl)porphyrin) tetratosylate (poly-Ni(4-TMPyP)) produces stable and electrochemically active films in strong and weak basic aqueous solutions. These films were produced on glassy carbon and gold electrodes. The electrochemical quartz crystal microbalance and cyclic voltammetry were used to study the in situ growth of poly(Ni(4-TMPyP)) films. The electrochemical properties of poly(Ni(4-TMPyP)) films indicate that the redox process was confined in to the immobilized film. The electrochemical quartz crystal microbalance results showed an ion exchange reaction for the redox couple. The polymer films showed one new redox couple when transferred to strong and weak basic aqueous solutions and the formal potential was found to be pH dependent. The electrocatalytic oxidation of H₂O by a nickel tetrakis(N-methyl-4-pyridyl)porphyrin film-modified electrode was also performed. The mechanism of oxygen evolution was determined by cyclic voltammetry, chronoamperometry and rotating ring disc electrode methods. The oxygen evolution was determined by a bicatalyst system using hemoglobin, and iron tetrakis (N-methyl-2-pyridyl)porphyrin as catalyst to detect the oxygen by electrocatalytic reduction. The electrocatalytic oxidations of adenine, guanine, H₂O₂, N₂H₄, NH₂OH, and l-cysteine by the film-modified electrode obtained from water-soluble nickel porphyrin were also investigated.     

Influence of Metal Nanoparticles on the Electrocatalytic Oxidation of Glucose by Poly(NiIIteta) Modified Electrodes

Conductive polymeric [Ni^II(teta)]²⁺ (teta=C‐meso‐5,5,7,12,12,14‐hexamethyl‐1,4,8,11‐tetra‐azacyclotetradecane) films (poly(Ni)) have been deposited on the surface of glassy carbon (GC), Nafion (Nf) modified GC (GC/Nf) and Nf stabilized Ag and Au nanoparticles (NPs) modified GC (GC/Ag‐Nf and GC/Au‐Nf) electrodes. The cyclic voltammogram of the resulting electrodes, show a well defined redox peak due to oxidation and reduction of poly(Ni) system in 0.1 M NaOH. They show electrocatalytic activity towards the oxidation of glucose. AFM studies reveal the formation of poly(Ni) film on the modified electrodes. Presence of metal NPs increases electron transfer rate and electrocatalytic oxidation current by improving the communication within the Nf and poly(Ni) films. In the presence of metal NPs, 4 fold increase in current for glucose oxidation was observed.     

Oxygen Reduction on Anthraquinone Diazonium Compound Derivatised Multi‐walled Carbon Nanotube and Graphene Based Electrodes

In this work, graphene and multi‐walled carbon nanotubes were derivatised with anthraquinone (AQ) groups using spontaneous or electrochemical grafting of Fast Red AL salt. Glassy carbon (GC) electrodes were coated with AQ‐modified carbon nanomaterials to study the oxygen reduction reaction (ORR). These nanomaterials were characterised by X‐ray photoelectron spectroscopy and multilayer formation of AQ on the electrografted electrodes was observed. All the modified electrodes showed enhanced electrocatalytic activity towards the ORR in alkaline media. High AQ loading on the electrodes was found and the number of electrons transferred per O₂ molecule was between 2 and 4. In addition, the stability testing of AQ‐derivatised carbon nanomaterial‐coated GC electrodes was performed.     

酞菁钴及其衍生物修饰电极对分子氧的电催化还原

在玻碳电极上采用吸附法制备了四溴代酞菁钴(CoPcBr₄)、酞菁钴(CoPc)和四-α-(2,2,4-三甲基-3-戊氧基)酞菁钴(CoPc(OC₈H₁₇)₄)修饰电极。利用循环伏安法和线性扫描伏安法研究了修饰电极在酸性介质中对分子氧的电催化还原,比较了不同取代基的酞菁钴对电催化性质的影响。结果表明,它们对分子氧还原均具有良好的电催化活性,其中酞菁钴和四-α-(2,2,4-三甲基-3-戊氧基)酞菁钴对O₂的催化是2电子还原生成H₂O₂,与裸电极相比,O₂的还原峰电位分别向正方向移动了0.33和0.48 V。而四溴代酞菁钴修饰电极在-0.1和-0.7 V附近产生的2个还原峰,说明它催化O₂到H₂O₂的还原以后还可以促进H₂O₂继续还原到H₂O,最终实现O₂的4电子还原。     

Oxygen electroreduction on anthraquinone-modified nickel electrodes in alkaline solution

The electrochemical reduction of oxygen has been studied on anthraquinone (AQ) modified nickel electrodes in 0.1 M KOH solution using the rotating disk electrode (RDE) technique. Modification of the Ni electrode surface with AQ by electrochemical reduction of the corresponding diazonium salt was carried out in two different media (in acetonitrile and in aqueous acidic solution). The AQ-modified Ni electrodes showed a good electrocatalytic activity for O₂ reduction. The RDE data indicate that the reduction of oxygen on Ni/AQ electrodes proceeds by a two-electron pathway in alkaline solution. The O₂ reduction results obtained for Ni/AQ electrodes are compared with those of AQ-modified glassy carbon electrodes.     

Electrocatalytic Dioxygen Reduction at Glassy Carbon Electrode Modified with Polyaniline Grafted Multiwall Carbon Nanotube Film

The work details the electrocatalysis of oxygen reduction reaction (ORR) in 0.5 M H₂SO₄ medium on a modified electrode containing a film of polyaniline (PANI) grafted multi‐wall carbon nanotube (MWNT) over the surface of glassy carbon electrode. We have fabricated a novel modified electrode in which conducting polymer is present as connected unit to MWNT. The GC/PANI‐g‐MWNT modified electrode (ME) is fabricated by electrochemical polymerization of a mixture of amine functionalized MWNT and aniline with GC as working electrode. Cyclic voltammetry and amperometry are used to demonstrate the electrocatalytic activity of the GC/PANI‐g‐MWNT‐ME. The GC/PANI‐g‐MWNT‐ME exhibits remarkable electrocatalytic activity for ORR. A more positive onset potential and higher catalytic current for ORR are striking features of GC/PANI‐g‐MWNT‐ME. Rapid and high sensitivity of GC/PANI‐g‐MWNT‐ME to ORR are evident from the higher rate constant (7.92×10² M^?1 s^?1) value for the reduction process. Double potential chronoamperometry and rotating disk and rotating ring‐disk electrode (RRDE) experiments are employed to investigate the kinetic parameters of ORR at this electrode. Results from RDE and RRDE voltammetry demonstrate the involvement of two electron transfer in oxygen reduction to form hydrogen peroxide in acidic media.     

A Comparative Study of Electrochemical Reduction of 4‐Nitrophenyl Covalently Grafted on Gold and Carbon

4‐Nitrophenyl layers were grafted on gold and glassy carbon surfaces by electrochemical reductive adsorption of the corresponding diazonium salt. Electrochemical conversion efficiencies of 4‐nitrophenyl moieties to 4‐aminophenyl moieties on gold versus on glassy carbon in a protic medium were investigated using X‐ray photoelectron spectroscopy (XPS). In total contrast to all previous comparative studies showing greater electrochemical reactivity of aryl diazonium salt‐derived layers on gold than on glassy carbon, a much lower rate of conversion to 4‐aminophenyl was observed on gold than on glassy carbon by both cyclic voltammetry (CV) and chronoamperometry (CA) methods. The lower electron transfer rate during conversion observed on gold versus glassy carbon was proposed to be due to a mechanism related to the molecular structure rearrangement of 4‐nitrophenyl during the process on glassy carbon. However, whilst complete conversion of 4‐nitrophenyl to 4‐aminophenyl on gold by chronoamperometry was achieved, on glassy carbon complete reduction could not be achieved under the same conditions.     

Electrochemical reduction of oxygen on double-walled carbon nanotube modified glassy carbon electrodes in acid and alkaline solutions

The oxygen reduction reaction has been investigated on double-walled carbon nanotube (DWCNT) modified glassy carbon (GC) electrodes in acid and alkaline media using the rotating disk electrode (RDE) method. The surface morphology and composition of DWCNT samples was examined by transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Aqueous suspensions of DWCNTs were prepared using Nafion and non-ionic surfactant Triton X-100 as dispersing agents. The RDE results indicated that the DWCNT modified GC electrodes are active catalysts for oxygen reduction in alkaline solution. In acid media DWCNT/GC electrodes possess poor electrocatalytic properties for O₂ reduction which indicates lack of metal catalyst impurities in the DWCNT material studied. The oxygen reduction behaviour of DWCNTs was similar to that of multi-walled carbon nanotubes (MWCNTs) observed in our previous studies.     

Attachment of anthraquinone derivatives to glassy carbon and the electrocatalytic behavior of the modified electrodes toward oxygen reduction

The electrochemical reduction of oxygen on glassy carbon (GC) electrodes modified with anthraquinones was studied using cyclic voltammetry (CV) and the rotating disk electrode (RDE) technique. Two methods were used in surface modification. The first method comprised immersion of the polished or anodically pretreated GC electrode in a solution containing 9,10-anthraquinone-2-carboxylic acid (AQ-2-COOH) or its anion (AQ-2-COO⁻) in dimethylsulfoxide (DMSO) or 9,10-anthraquinone-2-ethanoic acid (AQ-2-CH₂COOH) or its anion (AQ-2-CH₂COO⁻) in N,N-dimethylformamide (DMF). Alternatively, the surface of the GC disk was modified by anodic oxidation of AQ-2-COOH or AQ-2-COO⁻ in DMSO or AQ-2-CH₂COOH in DMSO or DMF or AQ-2-CH₂COO⁻ in DMF. The modified electrodes showed electrocatalytic activity toward oxygen reduction in 0.1 M acetate buffer pH (4.8), 0.1 M phosphate buffer (pH 8) and 0.1 M NaOH. Atomic force microscopy (AFM) examination of the modified electrodes was carried out and the differences in surface morphology of various modifications were in evidence.     

An Electrochemical Impedance Immunosensor Based on Gold Nanoparticle‐Modified Electrodes for the Detection of HbA1c in Human Blood

A label‐free immunosensor for the detection of HbA1c was developed based on gold nanoparticle (AuNP)‐aryl diazonium salt modified glassy carbon (GC) electrode where transduction is achieved using electrochemical impedance spectroscopy (EIS). GC electrodes were first modified with 4‐aminophenyl (Ph‐NH₂) layers to which AuNPs were attached. Thereafter an oligo(ethylene glycol) (OEG‐COOH) species were covalently attached to the remaining free amine groups on the Ph‐NH₂ surface. The AuNP surfaces were further modified with Ph‐NH₂ followed by attachment of a glycosylated pentapeptide (GPP), an analogon to HbA1c. Exposure of this interface to anti‐HbA1c IgG resulted in a change in charge transfer resistance (R_ct) due to the anti‐HbA1c IgG selectively complexing to the surface bound GPP. To detect the amount of HbA1c, a competitive inhibition assay was employed where the surface bound GPP and HbA1c in solution compete for the anti‐HbA1c IgG antibodies. The higher the concentration of HbA1c, the less antibody binds to the sensing interface and the lower the change of R_ct. The response of the immunosensor is linear with the HbA1c% of total haemoglobin in the range of 0%–23.3%. This competitive inhibition assay can be used for the detection of HbA1c in human blood. The performance of the immunosensor for detection of HbA1c in human blood is comparable to the clinical laboratory method.     

Nickel (II) tetraphenylporphyrin modified surfaces via electrografting of an aryldiazonium salt

We have prepared and isolated the monodiazonium salt of nickel (II) tetraphenylporphyrin and grafted the corresponding complex to glassy carbon, pyrolysed photoresist film, gold and indium tin oxide surfaces via reduction of the diazonium moiety. Characterisations of the films by voltammetry, UV–vis spectroscopy and atomic force microscopy depth profiling confirm that the metallated porphyrin is intact in the film and is stably attached to the surface with well-behaved, but highly solvent-dependent electrochemistry. Under the grafting conditions used, the films appear to have close to monolayer thickness with the porphyrin macrocycles oriented predominantly upright on the surface.     

Electrocatalytic Reduction of Oxygen at Multi‐Walled Carbon Nanotubes and Cobalt Porphyrin Modified Glassy Carbon Electrode

The multi‐walled carbon nanotubes (MWNTs) modified glassy carbon electrode exhibited electrocatalytic activity to the reduction of oxygen in 0.1 M HAc‐NaAc (pH 3.8) buffer solution. Further modification with cobalt porphyrin film on the MWNTs by adsorption, the resulted modified electrode showed more efficient catalytic activity to O₂ reduction. The reduction peak potential of O₂ is shifted much more positively to 0.12 V (vs. Ag/AgCl), and the peak current is increased greatly. Cyclic voltammetry (CV), transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), were used to characterize the material and the modified film on electrode surface. Electrochemical experiments gave the total number of electron transfer for oxygen reduction as about 3, which indicated a co‐exist process of 2 electrons and 4 electrons for reduction of oxygen at this modified electrode. Meanwhile, the catalytic activities of the multilayer film (MWNTs/CoTMPyP)_n prepared by layer‐by‐layer method were investigated, and the results showed that the peak current of O₂ reduction increased and the peak potential shifted to a positive direction with the increase of layer numbers.