A Blinking Mesoporous TiO2−x Composed of Nanosized Anatase with Unusually Long-Lived Trapped Charge Carriers

A mesoporous TiO_2−x material comprised of small, crystalline, vacancy-rich anatase nanoparticles (NPs) shows unique optical, thermal, and electronic properties. It is synthesized using polymer-derived mesoporous carbon (PDMC) as a template. The PDMC pores serve as physical barriers during the condensation and pyrolysis of a titania precursor, preventing the titania NPs from growing beyond 10 nm in size. Unlike most titania nanomaterials, during pyrolysis the NPs undergo no transition from the anatase to rutile phase and they become catalytically active reduced TiO_2−x. When exposed to a slow electron beam, the NPs exhibit a charge/discharge behavior, lighting up and fading away for an average period of 15 s for an extended period of time. The NPs also show a 50 nm red-shift in their UV/Vis absorption and long-lived charge carriers (electrons and holes) at room temperature in the dark, even long after UV irradiation. The NPs as photocatalysts show a good activity for CO₂ reduction.     

Carbon‐Coated and Interfacial‐Functionalized Mixed‐Phase MoxTi1−xO2‐δ Nanotubes as Highly Active and Durable PtRu Catalyst Support for Methanol Electrooxidation

A synchronous carbon‐coating and interfacial‐functionalizing approach is proposed for the fabrication of Mo‐doped Mo_xTi_1?xO_2‐δ nanotubes (C@IF‐MTNTs) under mild hydrothermal reaction with subsequent annealing as advanced catalyst supports for PtRu nanoparticles (NPs) towards methanol electrooxidation. The carbonation of glucose and Mo‐doping takes place simultaneously at the interface of pristine anatase TiO₂ nanotubes (TNTs), generating a unique concentric multilayered one‐dimensional (1D) structure with crystalline an anatase/rutile mixed‐phase TiO₂ core and Mo‐functionalized interface and subsequently a carbon shell. The obtained PtRu/C@IF‐MTNTs catalyst exhibits an over 2 times higher mass activity with comparable durability than that of the unmodified PtRu/C@TNTs catalyst and over 1.7 times higher mass activity with over 20 % higher stability than that of PtRu/C catalyst. Such superior catalytic performance towards methanol electrooxidation is ascribed to the Mo‐functionalized interface, concentric multilayered 1D architecture, and anatase/rutile mixed‐phase core, which facilitates the charge transport through 1D structural support and electronic interaction between C@IF‐MTNTs and ultrafine PtRu NPs. This work reveals the critical application of a 1D interfacial functionalized architecture for advanced energy storage and conversion.     

Improvement of the Visible‐Light Photocatalytic Performance of TiO2 by Carbon Mesostructures

An improvement in the photodegradation performance for dyes due to interaction between carbon and titania in a self‐assembled mesoporous C? TiO₂ composite catalyst, even for the difficult degradation of azo dyes, is reported herein. The dye removal process involves adsorption of the dye from water by the mesoporous carbon–titania, followed by photodegradation on the separated dye‐loaded solid. Such adsorption–catalysis cycles can be carried out more than 80 times without discernible loss of photocatalytic activity or the anatase content of the composite. In each run, about 120 mg dye per g catalyst can be degraded. The mesoporous carbon–titania catalyst also exhibits a high capacity for converting methyl orange in aqueous solution under visible light. Characterization by XRD, TEM, and N₂ sorption techniques has revealed that the self‐assembled composite catalyst has an ordered mesostructure, uniform mesopores (4.3 nm), a large pore volume (0.30 cm³ g^?1), and a high surface area (348 m² g^?1). The pore walls are composed of amorphous carbon and anatase nanoparticles of size 4.2 nm, which are well dispersed and confined. X‐ray photoelectron spectroscopy (XPS), surface photovoltage spectroscopy (SPS), and UV/Vis absorption results indicate doping of carbon into the anatase lattice and a change in the bandgap of the semiconductor. The synergistic improvement in the composite catalyst can be attributed to the following features: (1) carbon doping of the anatase lattice modifies its bandgap and enhances its activity under visible light; (2) confinement within carbon pore walls prevents aggregation of tiny anatase nanoparticles, improving their activity and stability; (3) the mesopores provide a confined space for photocatalysis; and (4) the strong adsorption ability of porous carbon for organic substances ensures that large quantities can be processed and inhibits further diffusion of the adsorbed organic substances, thereby enhancing the mineralization on anatase.     

A simple method to prepare titania nanomaterials of core-shell structure, hollow nanospheres and mesoporous nanoparticles

A simple method to prepare titania nanomaterials of core-shell structure, hollow nanospheres and mesoporous nanoparticles has been developed. The core-shell nanostructures with NH4Cl as core and TiO2·xH2O-NH4Cl as shell were prepared in nonaqueous system by the deposition on the surface of the aggregated NH4Cl crystals, which could be transformed into mesoporous anatase nanoparticles or hollow nanospheres by calcination at 500℃ or extraction with methanol, respectively. The hierarchical mesoporous nanostruc...     

Synthesis of Hollow Mesoporous TiO2 Microspheres with Single and Double Au Nanoparticle Layers for Enhanced Visible‐Light Photocatalysis

A facile method was used to prepare hollow mesoporous TiO₂ and Au@TiO₂ spheres using polystyrene (PS) templates. Au nanoparticles (NPs) were simultaneously synthesized and attached on the surface of PS spheres by reducing AuCl₄^? ions using sodium citrate which resulted in the uniform deposition of Au NPs. The outer coating of titania via sol‐gel produced PS@Au@TiO₂ core–shell spheres. Removing the templates from these core–shell spheres through calcination produced hollow mesoporous and crystalline Au@TiO₂ spheres with Au NPs inside the TiO₂ shell in a single step. Anatase spheres with double Au NPs layers, one inside and another outside of TiO₂ shell, were also prepared. Different characterization techniques indicated the hollow mesoporous and crystalline morphology of the prepared spheres with Au NPs. Hollow anatase spheres with Au NPs indicated enhanced harvesting of visible light and therefore demonstrated efficient catalytic activity toward the degradation of organic dyes under the irradiation of visible light as compared to bare TiO₂ spheres.     

Structurally Stabilized Organosilane‐Templated Thermostable Mesoporous Titania

Structurally thermostable mesoporous anatase TiO₂ (m‐TiO₂) nanoparticles, uniquely decorated with atomically dispersed SiO₂, is reported for the first time. The inorganic Si portion of the novel organosilane template, used as a mesopores‐directing agent, is found to be incorporated in the pore walls of the titania aggregates, mainly as isolated sites. This is evident by transmission electron microscopy and high‐angle annular dark field scanning transmission electron microscopy, combined with electron dispersive X‐ray spectroscopy. This type of unique structure provides exceptional stability to this new material against thermal collapse of the mesoporous structure, which is reflected in its high surface area (the highest known for anatase titania), even after high‐temperature (550 °C) calcination. Control of crystallite size, pore diameter, and surface area is achieved by varying the molar ratios of the titanium precursor and the template during synthesis. These mesoporous materials retain their porosity and high surface area after template removal and further NaOH/HCl treatment to remove silica. We investigate their performance for dye‐sensitized solar cells (DSSCs) with bilayer TiO₂ electrodes, which are prepared by applying a coating of m‐TiO₂ onto a commercial titania (P25) film. The high surface area of the upper mesoporous layer in the P25–m‐TiO₂ DSSC significantly increases the dye loading ability of the photoanode. The photocurrent and fill factor for the DSSC with the bilayer TiO₂ electrode are greatly improved. The large increase in photocurrent current (ca. 56 %) in the P25–m‐TiO₂ DSSC is believed to play a significant role in achieving a remarkable increase in the photovoltaic efficiency (60 %) of the device, compared to DSSCs with a monolayer of P25 as the electrode.     

Visible‐Light‐Induced Electron Transport from Small to Large Nanoparticles in Bimodal Gold Nanoparticle‐Loaded Titanium(IV) Oxide

A key to realizing the sustainable society is to develop highly active photocatalysts for selective organic synthesis effectively using sunlight as the energy source. Recently, metal‐oxide‐supported gold nanoparticles (NPs) have emerged as a new type of visible‐light photocatalysts driven by the excitation of localized surface plasmon resonance of Au NPs. Here we show that visible‐light irradiation (λ>430 nm) of TiO₂‐supported Au NPs with a bimodal size distribution (BM‐Au/TiO₂) gives rise to the long‐range (>40 nm) electron transport from about 14 small (ca. 2 nm) Au NPs to one large (ca. 9 nm) Au NP through the conduction band of TiO₂. As a result of the enhancement of charge separation, BM‐Au/TiO₂ exhibits a high level of visible‐light activity for the one‐step synthesis of azobenzenes from nitrobenzenes at 25 °C with a yield greater than 95 % and a selectivity greater than 99 %, whereas unimodal Au/TiO₂ (UM‐Au/TiO₂) is photocatalytically inactive.     

Preparation and Photocatalytic Properties of Ti1-xZrxO2 Solid Solution

A series of Ti1-xZrxO2 materials were synthesized through a multistep sol-gel process. The structural characteristics were investigated using X-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and Raman measurements. The experimental results showed that a solid solution could be obtained at low Zr/（Ti＋Zr） molar ratios （x ≤0.319）. Raman measurements exhibited that the presence of zirconium in the solid solutions greatly retarded the amorphous-anatase and anatase-rutile transitions. The diffuse reflectance UV-Vis spectra revealed that the bandgap of the solid solution was enlarged gradually with the increment of incorporated zirconium content. The Ti1-xZrxO2 solid solutions exhibited higher photocatalytic activity than pure TiO2 for the degradation of 4-chlorophenol aqueous solution.     

Carbon‐Dot‐Sensitized,Nitrogen‐Doped TiO2 in Mesoporous Silica for Water Decontamination through Nonhydrophobic Enrichment–Degradation Mode

Mesoporous silica synthesized from the cocondensation of tetraethoxysilane and silylated carbon dots containing an amide group has been adopted as the carrier for the in situ growth of TiO₂ through an impregnation–hydrothermal crystallization process. Benefitting from initial complexation between the titania precursor and carbon dot, highly dispersed anatase TiO₂ nanoparticles can be formed inside the mesoporous channel. The hybrid material possesses an ordered hexagonal mesostructure with p6mm symmetry, a high specific surface area (446.27 m² g^?1), large pore volume (0.57 cm³ g^?1), uniform pore size (5.11 nm), and a wide absorption band between λ=300 and 550 nm. TiO₂ nanocrystals are anchored to the carbon dot through Ti?O?N and Ti?O?C bonds, as revealed by X‐ray photoelectron spectroscopy. Moreover, the nitrogen doping of TiO₂ is also verified by the formation of the Ti?N bond. This composite shows excellent adsorption capabilities for 2,4‐dichlorophenol and acid orange 7, with an electron‐deficient aromatic ring, through electron donor–acceptor interactions between the carbon dot and organic compounds instead of the hydrophobic effect, as analyzed by the contact angle analysis. The composite can be photocatalytically recycled through visible‐light irradiation after adsorption. The narrowed band gap, as a result of nitrogen doping, and the photosensitization effect of carbon dots are revealed to be coresponsible for the visible‐light activity of TiO₂. The adsorption capacity does not suffer any clear losses after being recycled three times.     

Synthesis of α‐MoC1−x Nanoparticles with a Surface‐Modified SBA‐15 Hard Template: Determination of Structure–Function Relationships in Acetic Acid Deoxygenation

Surface modification of mesoporous SBA‐15 silica generated a hydrophobic environment for a molybdenum diamine (Mo‐diamine) precursor solution, enabling direct growth of isolated 1.9±0.4 nm α‐MoC_1?x nanoparticles (NPs) inside the pores of the support. The resulting NP catalysts are bifunctional, and compared to bulk α‐MoC_1?x and β‐Mo₂C, the NPs exhibit a greater acid‐site:H‐site ratio and a fraction of stronger acid sites. The greater acid‐site:H‐site ratio results in higher decarbonylation (DCO) selectivity during acetic acid hydrodeoxygenation (HDO) reactions, and the stronger acid sites lead to higher activity and ketonization (KET) selectivity at high temperatures. The hard‐templating synthetic method could be a versatile route toward carbide NPs of varying size, composition, and phase, on a range of mesoporous oxide supports.     

Computational investigation of the adsorption and reactions of SiHx (x = 0–4) on TiO2 anatase (101) and rutile (110) surfaces

The adsorption and reactions of the SiH_x (x = 0–4) on Titanium dioxide (TiO₂) anatase (101) and rutile (110) surfaces have been studied by using periodic density functional theory in conjunction with the projected augmented wave approach. It is found that SiH_x (x = 0–4) can form the monodentate, bidentate, or tridentate adsorbates, depending on the value of x. H coadsorption is found to reduce the stability of SiH_x adsorption. Hydrogen migration on the TiO₂ surfaces is also discussed for elucidation of the SiH_x decomposition mechanism. Comparing adsorption energies, energy barriers, and potential energy profiles on the two TiO₂ surfaces, the SiH_x decomposition can occur more readily on the rutile (110) surface than on the anatase (101) surface. The results may be used for kinetic simulation of Si thin‐film deposition and quantum dot preparation on titania by chemical vapor deposition (CVD), plasma enhanced CVD, or catalytically enhanced CVD. © 2013 Wiley Periodicals, Inc.     

Controlling the Selectivity of the Surface Plasmon Resonance Mediated Oxidation of p‐Aminothiophenol on Au Nanoparticles by Charge Transfer from UV‐excited TiO2

Although catalytic processes mediated by surface plasmon resonance (SPR) excitation have emerged as a new frontier in catalysis, the selectivity of these processes remains poorly understood. Here, the selectivity of the SPR‐mediated oxidation of p‐aminothiophenol (PATP) employing Au NPs as catalysts was controlled by the choice of catalysts (Au or TiO₂‐Au NPs) and by the modulation of the charge transfer from UV‐excited TiO₂ to Au. When Au NPs were employed as catalyst, the SPR‐mediated oxidation of PATP yielded p,p‐dimercaptobenzene (DMAB). When TiO₂‐Au NPs were employed as catalysts under both UV illumination and SPR excitation, p‐nitrophenol (PNTP) was formed from PATP in a single step. Interestingly, PNTP molecules were further reduced to DMAB after the UV illumination was removed. Our data show that control over charge‐transfer processes may play an important role to tune activity, product formation, and selectivity in SPR‐mediated catalytic processes.     

A Novel Route to the Synthesis of Mesoporous Titania with Full Anatase Nanocrystalline Domains

A porous, high surface area TiO₂ with anatase or rutile crystalline domains is advantageous for high efficiency photonic devices. Here, we report a new route to the synthesis of mesoporous titania with full anatase crystalline domains. This route involves the preparation of anatase nanocrystalline seed suspensions as the titania precursor and a block copolymer surfactant, Pluronic P123 as the template for the hydrothermal self-assembly process. A large pore (7–8 nm) mesoporous titania with a high surface area of 106–150 m²/g after calcination at 400°C for 4 h in air is achieved. Increasing the hydrothermal temperature decreases the surface area and creates larger pores. Characteristics of the seed precursors as well as the resultant mesoporous titania powder were studied using XRD analysis, N₂-adsorption/desorption analysis, and TEM. We believe these materials will be especially useful for photoelectrochemical solar cell and photocatalysis applications.     

Monitoring of potential cytotoxic and inhibitory effects of titanium dioxide using on-line and non-invasive cell-based impedance spectroscopy

Titanium dioxide (TiO₂) nanoparticles (NPs) with different sizes and structures were probed for plausible cytotoxicity using electric cell-substrate impedance sensing (ECIS), a non-invasive and on-line procedure for continuous monitoring of cytotoxicity. For insect cells (Spodoptera frugiperda Sf9), the ECIS₅₀ values, i.e., the concentration required to achieve 50% inhibition of the response, differed depending on the size and shape of the TiO₂ nanostructure. The lowest ECIS₅₀ value (158 ppm) was observed for the needle shaped rutile TiO₂ (10 nm × 40 nm, 15.5 nm nominal particle size), followed by 211 ppm for P-25 (34.1 nm, 80% anatase and 20% rutile), 302 ppm for MTI5 (5.9 nm, 99% anatase) and 417 ppm for Hombitan LW-S bulk TiO₂ (169.5 nm, 99% anatase). Exposure of TiO₂ NPs to UV light at 254 nm or 365 nm exhibited no significant effect on the ECIS₅₀ value due to the aggregation of TiO₂ NPs with diminishing photocatalytic activities. Chinese hamster lung fibroblast V79 cells, exhibited no significant cytotoxicity/inhibition up to 400 ppm with P25, MTI₅ and bulk TiO₂. However, a noticeable inhibitory effect was observed (ECIS₅₀ value of 251 ppm) with rutile TiO₂ as cell spreading on the electrode surface was prevented     

硼铈共掺杂纳米TiO2光催化降解三氯杀螨醇和菊酯类农药

采用溶胶-凝胶法在钛酸丁酯水解过程引入硼酸、硝酸铈,制备具有光催化活性的硼铈共掺杂纳米二氧化钛（TiO2）,经XRD、TEM、FT-IR、UV-Vis-DRS表征晶体结构,在日光灯照射下,光催化降解三氯杀螨醇、高氟氯氰菊酯、氟戊菊酯农药。结果表明：硼铈共掺杂的TiO2只有锐钛矿型,而纯的或掺铈的TiO2有含有锐钛矿型、金红石相和少量板钛矿型,UV-Vis-DRS测定结果表明硼铈共掺杂的TiO2禁带宽度变小,硼铈共掺杂的TiO2在可见光区吸光度高于掺杂铈和不掺杂的TiO2,在420nm~850nm有强的吸收;在同样光照下对三氯杀螨醇、高氟氯氰菊酯、氟戊菊酯的降解试验证明硼铈共掺杂纳米TiO2的光催化活性高于不掺杂或只掺杂铈的TiO2。     

Mesoporous TiO2−xAy (A = N,S) as a visible-light-response photocatalyst

Mesoporous TiO_2?xA_y (A = N, S) thin films were fabricated using thiourea as a doping resource by a combination of sol-gel and evaporation-induced self-assembly (EISA) processes. The results showed that thiourea could serve two functions of co-doping nitrogen and sulfur and changing the mesoporous structure of TiO₂ thin films. The resultant mesoporous TiO_2?xA_y (A = N, S) exhibited anatase framework with a high porosity and a narrow pore distribution. The formation of the O–Ti–N and O–Ti–S bonds in the mesoporous TiO_2?xA_y (A = N, S) were substantiated by the XPS spectra. A new bandgap in visible light region (520 nm) corresponding to 2.38 eV could be formed by the co-doping. After being illuminated for 3 h, methyl orange could be degraded nearly completely by the co-doped sample under both ultraviolet irradiation and visible light illumination. While pure mesoporous TiO₂ could only degrade 60% methyl orange under UV illumination and showed negligible photodegradation capability in the visible light range. Furthermore, the photo-induced hydrophilic activity of TiO₂ film was improved by the co-doping. The mesoporous microstructure and high visible light absorption could be attributed to their good photocatalytic acitivity and hydrophilicity.     

Spiky Mesoporous Anatase Titania Beads: A Metastable Ammonium Titanate‐Mediated Synthesis

A complex titania nanostructure of monodisperse spiky mesoporous anatase beads composed of anatase nanocrystals with diameters of less than 15 nm in the core and much larger hollow‐cone shaped spikes on the surface was fabricated using a facile solvothermal process in the presence of ammonia. This proceeded through a controllable phase transformation from an amorphous titania to a metastable amorphous titania/ammonium titanate core‐shell structure then finally to anatase titania. The size of the spiky anatase nanostructures can be increased from approximately 55×100 nm to 160×410 nm (square edge×length) by increasing the ammonia concentration used in the solvothermal treatment step from 2.2 to 17.4 wt. %. Such hollow‐cone shaped nanostructures, as revealed by HRTEM characterization, are single crystals elongated along the c axis of the tetragonal anatase titania. The resultant spiky titania beads have high surface areas of up to 112 m²g^?1 and pore diameters and pore volumes that vary depending on the ammonia concentration and solvothermal treatment time. The morphological evolution and crystallization process of the spiky titania beads was investigated using SEM and XRD techniques. A metastable amorphous titania/ammonium titanate core‐shell structure evolved from the smooth amorphous precursor beads producing a “fluffy” titanate intermediate, on further heating the final spiky mesoporous titania beads were clearly observed. This titanate‐phase‐mediated approach allows control over the size of the nanocrystals in the core of the bead, as well as the anatase spikes on the surface, and thereby, tuning of the surface area and porosity of the resultant products. The spiky mesoporous titania beads have been used to prepare working electrodes for dye‐sensitized solar cells achieving a solar to electric power conversion efficiency of 10.30 %, indicating their potential for application in the photovoltaic field. Such complex titania nanostructures would have a number of other possible applications, such as photocatalysis, lithium ion batteries, and catalysis.     

Zinc‐Reduced Mesoporous TiOx Li‐Ion Battery Anodes with Exceptional Rate Capability and Cycling Stability

We demonstrate a unique synthetic route for oxygen‐deficient mesoporous TiO_x by a redox–transmetalation process by using Zn metal as the reducing agent. The as‐obtained materials have significantly enhanced electronic conductivity; 20 times higher than that of as‐synthesized TiO₂ material. Moreover, electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT) measurements are performed to validate the low charge carrier resistance of the oxygen‐deficient TiO_x. The resulting oxygen‐deficient TiO_x battery anode exhibits a high reversible capacity (～180 mA h g^?1 at a discharge/charge rate of 1 C/1 C after 400 cycles) and an excellent rate capability (～90 mA h g^?1 even at a rate of 10 C). Also, the full cell, which is coupled with a LiCoO₂ cathode material, exhibits an outstanding rate capability (>75 mA h g^?1 at a rate of 3.0 C) and maintains a reversible capacity of over 100 mA h g^?1 at a discharge/charge of 1 C/1 C for 300 cycles.     

Dipole‐Induced Band‐Gap Reduction in an Inorganic Cage

Metal‐doped polyoxotitanium cages are a developing class of inorganic compounds which can be regarded as nano‐ and sub‐nano sized molecular relatives of metal‐doped titania nanoparticles. These species can serve as models for the ways in which dopant metal ions can be incorporated into metal‐doped titania (TiO₂), a technologically important class of photocatalytic materials with broad applications in devices and pollution control. In this study a series of cobalt(II)‐containing cages in the size range ca. 0.7–1.3 nm have been synthesized and structurally characterized, allowing a coherent study of the factors affecting the band gaps in well‐defined metal‐doped model systems. Band structure calculations are consistent with experimental UV/Vis measurements of the Ti_xO_y absorption edges in these species and reveal that molecular dipole moment can have a profound effect on the band gap. The observation of a dipole‐induced band‐gap decrease mechanism provides a potentially general design strategy for the formation of low band‐gap inorganic cages.     

Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).