A novel microwave dielectric ceramic Ca2Zn4Ti16O38: Preparation and dielectric properties

A novel microwave dielectric powder with composition of Ca₂Zn₄Ti₁₆O₃₈ was synthesized through a citrate sol-gel process. The development of crystalline phases with heat-treating temperature for the gel derived powders was evaluated by using thermo-gravimetric analysis and X-ray powder diffraction analysis techniques. The pure phase of Ca₂Zn₄Ti₁₆O₃₈ with crichtonite crystal structure was obtained at relatively low temperature of 1000 °C. The synthesized powder has high reactivity and the dense ceramics with single crystalline phase were obtained at low sintering temperature of 1100 °C. Impedance spectroscopy and microwave dielectric measurements on sintered samples showed the present compound to be a modest dielectric insulator with excellent dielectric properties of ε_r∼47-49, Qf value ∼27,800-31,600 GHz and τ_f∼+45 to +50 ppm/°C. It shows comparable microwave dielectric properties to other moderate-permittivity microwave dielectrics, but much lower sintering temperature of 1100 °C.     

Crystal structure of Bi1−xTbxFeO3 from high-resolution neutron diffraction

Samples of Bi_1−xTb_xFeO₃, with x=0.05, 0.10, 0.15, 0.20 and 0.25, have been synthesised by solid state reaction. The crystal structures of the perovskite phases, characterised via Rietveld analysis of high resolution powder neutron diffraction data, reveal a structural transition from the R3c symmetry of the parent phase BiFeO₃ to orthorhombic Pnma symmetry, which is complete for x=0.20. The x=0.10 and 0.15 samples are bi-phasic. The transition from a rhombohedral to orthorhombic unit cell is suggested to be driven by the dilution of the stereochemistry of the Bi³⁺ lone pair at the A-site. The G-type antiferromagnetic spin structure, the size of the ordered magnetic moment (∼3.8 μ_B) and the T_N (∼375 °C) are relatively insensitive to increasing Tb concentrations at the A-site.     

Ferromagnetic ordering in ThSi2 type CeAu0.28Ge1.72

The compound CeAu_0.28Ge_1.72 crystallizes in the ThSi₂ structure type in the tetragonal space group I4₁/amd with lattice parameters a=b=4.2415(6) Å c=14.640(3) Å. CeAu_0.28Ge_1.72 is a polar intermetallic compound having a three-dimensional Ge/Au polyanion sub-network filled with Ce atoms. The magnetic susceptibility data show Curie-Weiss law behavior above 50 K. The compound orders ferromagnetically at ∼8 K with estimated magnetic moment of 2.48 μ_B/Ce. The ferromagnetic ordering is confirmed by the heat capacity data which show a rise at ∼8 K. The electronic specific heat coefficient (γ) value obtained from the paramagnetic temperature range 15-25 K is∼124(5) mJ/ mol K². The entropy change due to the ferromagnetic transition is ∼4.2 J/mol K which is appreciably reduced compared to the value of R ln(2) expected for a crystal-field-split doublet ground state and/or Kondo exchange interactions.     

A novel ferrimagnetic irido-cuprate: IrSr2GdCu2O8

We have performed an investigation of the structural, microstructural and magnetic properties of the new compound IrSr₂GdCu₂O₈. The sample was prepared under high temperature (∼1393 K) and high-pressure conditions (∼60 Kbars) in a Belt type apparatus. X-ray diffraction (XRD) analysis shows that this irido-cuprate is isostructural with the corresponding Ru-1212 phase. Structurally, this material shows an interesting hierarchy of ordering phenomena, whose observation actually depends on the technique used to analyze the material: from a “simple” cell a_p×a_p×3a_p which is supported by XRD, through a “diagonal” one, as seen by SAED, to a microdomain texture of this last one cell supported by HREM. A ferrimagnetic Ir^IV-Gd^III spin ordering is observed below 15 K. The iridium oxidation state seems to be +4.     

Magnetic properties of Fe2P-type R6CoTe2 compounds (R=Gd-Er)

The magnetic structure of the Fe₂P-type R₆CoTe₂ phases (R=Gd-Er, space group P6¯2m) has been investigated through magnetization measurement and neutron powder diffraction. All phases demonstrate high-temperature ferromagnetic and low-temperature transitions: T_C=220 K and T_CN=180 K for Gd₆CoTe₂, T_C=174 K and T_CN=52 K for Tb₆CoTe₂, T_C=125 K and T_CN=26 K for Dy₆CoTe₂, T_CN=60 K and T_N=22 K for Ho₆CoTe₂ and T_CN∼30 K and T_N∼14 K for Er₆CoTe₂.Between 174 and 52 K Tb₆CoTe₂ has a collinear magnetic structure with K₀=[0, 0, 0] and with magnetic moments along the c-axis, whereas below 52 K it adopts a non-collinear ferromagnetic one.Below 60 K the magnetic structure of Ho₆CoTe₂ is that of a non-collinear ferromagnet. The holmium magnetic components with a K₀=[0, 0, 0] wave vector are aligned ferromagneticaly along the c-axis, whereas the magnetic component with a K₁=[1/2, 1/2, 0] wave vector are arranged in the ab plane. The low-temperature magnetic transition at ∼22 K coincides with the reorientation of the Ho magnetic component with the K₀ vector from the collinear to the non-collinear state.Below 30 K Er₆CoTe₂ shows an amplitude-modulate magnetic structure with a collinear arrangement of magnetic components with K₀=[0, 0, 0] and K₁=[1/2, 1/2, 0]. The low-temperature magnetic transition at ∼14 K corresponds to the variation in the magnitudes of the M_Er^K0 and M_Er^K1 magnetic components.In these phases, no local moment was detected on the cobalt site.The magnetic entropy of Gd₆CoTe₂ increases from ΔS_mag=−4.5 J/kg K at 220 K up to ΔS_mag=−6.5 J/kg K at 180 K for the field change Δμ₀H=0-5 T.     

High-temperature thermoelectric studies of A11Sb10 (A=Yb, Ca)

Large samples (6-8 g) of Yb₁₁Sb₁₀ and Ca₁₁Sb₁₀ have been synthesized using a high-temperature (1275-1375 K) flux method. These compounds are isostructural to Ho₁₁Ge₁₀, crystallizing in the body-centered, tetragonal unit cell, space group I4/mmm, with Z=4. The structure consists of antimony dumbbells and squares, reminiscent of Zn₄Sb₃ and filled Skutterudite (e.g., LaFe₄Sb₁₂) structures. In addition, these structures can be considered Zintl compounds; valence precise semiconductors with ionic contributions to the bonding. Differential scanning calorimetry (DSC), thermogravimetry (TG), resistivity (ρ), Seebeck coefficient (α), thermal conductivity (κ), and thermoelectric figure of merit (zT) from room temperature to at minimum 975 K are presented for A₁₁Sb₁₀ (A=Yb, Ca). DSC/TG were measured to 1400 K and reveal the stability of these compounds to ∼1200 K. Both A₁₁Sb₁₀ (A=Yb, Ca) materials exhibit remarkably low lattice thermal conductivity (∼10 mW/cm K for both Yb₁₁Sb₁₀ and Ca₁₁Sb₁₀) that can be attributed to the complex crystal structure. Yb₁₁Sb₁₀ is a poor metal with relatively low resistivity (1.4 mΩ cm at 300 K), while Ca₁₁Sb₁₀ is a semiconductor suggesting that a gradual metal-insulator transition may be possible from a Ca_11−xYb_xSb₁₀ solid solution. The low values and the temperature dependence of the Seebeck coefficients for both compounds suggest that bipolar conduction produces a compensated Seebeck coefficient and consequently a low zT.     

The structural chemistry of Bi14MO24 (M=Cr, Mo, W) phases: bismuth oxides containing discrete MO4 tetrahedra

The phases Bi₁₄MO₂₄ (M=Cr, Mo, W) have been studied using differential scanning calorimetry, variable temperature X-ray powder diffraction and neutron powder diffraction. All three compounds were found to undergo a phase change, on cooling, from the previously reported tetragonal symmetry (I4/m) to monoclinic symmetry (C2/m). Transition temperatures were determined to be ∼306 K (M=W) and ∼295 K (M=Mo), whereas a gradual transition between 275 and 200 K was observed for M=Cr. The high and low temperature structures are very similar, as indicated by the relationship between the monoclinic and tetragonal unit cell parameters: a_m=√2a_t, b_m=c_t, c_m=a_t, β∼135°. High-resolution neutron powder diffraction data, collected at 400 and 4 K, were used to establish the nature of the transition, which was found to involve a reduction in the statistical possibilities for orientation of the MO₄ tetrahedra. However, in both tetragonal and monoclinic variants, a degree of orientational disorder of the tetrahedra occurs to give partially occupied sites in the average unit cell.     

Synthesis, crystal structure and magnetic properties of a new pillared perovskite La5Mo2.75V1.25O16

A new pillared perovskite compound La₅Mo_2.76(4)V_1.25(4)O₁₆, has been synthesized by solid-state reaction and its crystal structure has been characterized using powder X-ray and neutron diffraction. The magnetic properties of this compound have been investigated using SQUID magnetometry, and the magnetic structure has been studied using neutron diffraction data. A theoretical calculation of relative strengths of spin interactions among different magnetic ions and through different pathways has been performed using extended Hückel, spin dimer analysis. The crystal structure of this material contains perovskite-type layers that are connected through edge-sharing dimeric units of octahedra. The structure is described in space group C2/m with unit cell parameters a=7.931(2) Å, b=7.913(2) Å, c=10.346(5) Å and β=95.096(5)°. The material shows both short-range ferrimagnetic correlations from ∼200 to 110 K and long-range antiferromagnetic order below T_c∼100 K. The magnetic structure was investigated by neutron diffraction and is described by k=(0 0 ) as for other pillared perovskites. It consists of a ferrimagnetic arrangement of Mo and V within the layers that are coupled antiferromagnetically between layers. This is the first magnetic structure determination for any Mo-based pillared perovskite.     

Crystal and magnetic structures of the brownmillerite compound Ca2Fe1.039(8)Mn0.962(8)O5

The crystal and magnetic structures of the brownmillerite material, Ca₂Fe_1.039(8)Mn_0.962(8)O₅ were investigated using powder X-ray and neutron diffraction methods, the latter from 3.8 to 700 K. The compound crystallizes in Pnma space group with unit cell parameters of a=5.3055(5) Å, b=15.322(2) Å, c=5.4587(6) Å at 300 K. The neutron diffraction study revealed the occupancies of Fe³⁺ and Mn³⁺ ions in both octahedral and tetrahedral sites and showed some intersite mixing and a small, ∼4%, Fe excess. While bulk magnetization data were inconclusive, variable temperature neutron diffraction measurements showed the magnetic transition temperature to be 407(2) K below which a long range antiferromagnetic ordering of spins occurs with ordering wave vector k=(000). The spins of each ion are coupled antiferromagnetically with the nearest neighbors within the same layer and coupled antiparallel to the closest ions from the neighboring layer. This combination of intra- and inter-layer antiparallel arrangement of spins forms a G-type magnetic structure. The ordered moments on the octahedral and tetrahedral sites at 3.8 K are 3.64(16) and 4.23(16) μ_B, respectively.     

Synthesis and properties of the Co7Se8−xSx and Ni7Se8−xSx solid solutions

We report the synthesis and elementary properties of the Co₇Se_8−xS_x (x=0-8) and Ni₇Se_8−xS_x (x=0-7) solid solutions. Both systems form a NiAs-type structure with metal vacancies. In general, the lattice parameters decrease with increasing x, but in the Ni₇Se_8−xS_x system c increases on going from x=5 to 7. Magnetic susceptibility measurements show that all samples exhibit temperature-independent paramagnetism from 25-250 K. Samples within the Co₇Se_8−xS_x system, as well as Ni₇Se₈ and Ni₇SeS₇, were found to be poor metals with resistivities of ∼0.20 and ∼0.06 mΩ cm at 300 K, respectively. The Sommerfeld constant (γ) was determined from specific heat measurements to be ∼13 mJ/mol_CoK² and ∼7 mJ/mol_NiK² for Co₇Se_8−xS_x and Ni₇Se_8−xS_x, respectively.     

Crystal structures of CsFe2S3 and RbFe2S3: synthetic analogs of rasvumite KFe2S3

The isostructural alkali thioferrate compounds CsFe₂S₃, RbFe₂S₃ and KFe₂S₃ have been synthesized by reacting Fe and S with their corresponding AFeS₂ (A=K, Rb, Cs) precursors. The crystal structures of these and binary compounds of intermediate composition were determined by Rietveld analysis of laboratory powder X-ray diffraction patterns. All of the synthesized compounds adopt the space group Cmcm (#63), Z=4 with: a=9.5193(8) Å, b=11.5826(10) Å, c=5.4820(4) Å for CsFe₂S₃; a=9.2202(7) Å, b=11.2429(9) Å, c=5.4450(3) Å for RbFe₂S₃; and a=9.0415(13) Å, b=11.0298(17) Å, c=5.4177(6) Å for KFe₂S₃. These mixed valence alkali thioferrates show regular changes in cell dimensions, AS₁₀ (A=K, Rb, Cs) polyhedron volumes, polyhedron distortion parameters, and calculated oxidation state of Fe with respect to increasing size of the alkali element cation. The calculated empirical oxidation state of iron varies from +2.618 (CsFe₂S₃), through +2.666 (RbFe₂S₃) to +2.77 (KFe₂S₃).     

Crystal structure, magnetic and electrochemical properties of a quaternary thiospinel: Ag2MnSn3S8

A monophasic sample of Ag₂MnSn₃S₈ has been prepared by heating stoichiometric amounts of the constituent metals and sulfur in evacuated silica tubes at 670°C. Structural analysis of Ag₂MnSn₃S₈ using Rietveld refinement of powder X-ray diffraction data shows that it crystallizes in the space group with a=10.6984(2) Å. Magnetization measurements in the temperature range 5-300 K indicate paramagnetic behavior with a μ_eff of 5.80 μ_B, consistent with the divalent nature of manganese. Electrochemical studies show a coulombic capacity of ∼50 Ah kg⁻¹ for the cell constructed with Ag₂MnSn₃S₈ as the positive electrode.     

The structural investigation of Ba4Bi3F17

The anion-excess ordered fluorite-related phase Ba₄Bi₃F₁₇ has been synthesized by a solid state reaction of BaF₂ and BiF₃ at 873 K. The crystal structure of Ba₄Bi₃F₁₇ has been studied using electron diffraction and X-ray powder diffraction (a=11.2300(2) Å, c=20.7766(5) Å, S.G. , R_I=0.020, R_P=0.036). Interstitial fluorine atoms in the Ba₄Bi₃F₁₇ structure are considered to form isolated cuboctahedral 8 : 12 : 1 clusters. The structural relationship between Ba₄Bi₃F₁₇ and similar rare-earth-based phases is discussed.     

Synthesis and characterization of quaternary chalcogenides InSn2Bi3Se8 and In0.2Sn6Bi1.8Se9

Quaternary chalcogenides InSn₂Bi₃Se₈ and In_0.2Sn₆Bi_1.8Se₉ were synthesized on direct combination of their elements in stoichiometric ratios at T>800 °C under vacuum. Their structures were determined with X-ray diffraction of single crystals. InSn₂Bi₃Se₈ crystallizes in monoclinic space group C2/m (No. 12) with a=13.557(3) Å, b=4.1299(8) Å, c=15.252(3) Å, β=115.73(3)°, V=769.3(3) Å³, Z=2, and R₁/wR₂/GOF=0.0206/0.0497/1.092; In_0.2Sn₆Bi_1.8Se₉ crystallizes in orthorhombic space group Cmc2₁ (No. 36) with a=4.1810(8) Å, b=13.799(3) Å, c=31.953(6) Å, V=1843.4(6) Å³, Z=4, and R₁/wR₂/GOF=0.0966/0.2327/1.12. InSn₂Bi₃Se₈ and In_0.2Sn₆Bi_1.8Se₉ are isostructural with CuBi₅S₈ and Bi₂Pb₆S₉ phases, respectively. The structures of InSn₂Bi₃Se₈ and In_0.2Sn₆Bi_1.8Se₉ feature a three-dimensional framework containing slabs of NaCl-(311) type with varied thicknesses. Calculations of the electronic structure and measurements of electrical conductivity indicate that these materials are semiconductors with narrow band gaps. Both compounds show n-type semiconducting properties with Seebeck coefficients −270 and −230 μV/K at 300 K for InSn₂Bi₃Se₈ and In_0.2Sn₆Bi_1.8Se₉, respectively.     

X-ray and neutron powder diffraction study of the order-disorder transition in Eu2IrH5 and the mixed crystal compounds Eu2−xAxIrH5 (A=Ca, Sr; x=1.0, 1.5)

The title compounds and their deuterides have been prepared by solid-state and solid-gas reactions from the elements and investigated by X-ray and neutron powder diffraction as a function of temperature. At room temperature they crystallize with an anion-deficient cubic K₂PtCl₆-type structure (space group ) in which five hydrogen (deuterium) atoms surround iridium randomly on six octahedral sites with average bond distances of Ir-D=169-171 pm. At low temperature they undergo a tetragonal deformation (space group I4/mmm) to the partially ordered Sr₂IrD₅ (T=4.2K)-type structure in which four hydrogen (deuterium) atoms occupy planar sites with full occupancy (Ir-D=166-170 pm) and two hydrogen (deuterium) atoms axial sites (Ir-D=174-181 pm) with ∼50% occupancy, i.e., the data are consistent with a mixture of square-pyramidal [IrD₅]⁴⁻ complexes pointing in two opposite directions. The transitions occur at ∼240 K (Eu_0.5Ca_1.5IrD₅, Eu_0.5Sr_1.5IrD₅), ∼210 K (EuSrIrD₅), ∼200 K (EuCaIrD₅, Eu₂IrD₅), and are presumably of first order.     

Phase formation, crystal chemistry, and properties in the system Bi2O3-Fe2O3-Nb2O5

Subsolidus phase relations have been determined for the Bi₂O₃-Fe₂O₃-Nb₂O₅ system in air (900-1075 °C). Three new ternary phases were observed—Bi₃Fe_0.5Nb_1.5O₉ with an Aurivillius-type structure, and two phases with approximate stoichiometries Bi₁₇Fe₂Nb₃₁O₁₀₆ and Bi₁₇Fe₃Nb₃₀O₁₀₅ that appear to be structurally related to Bi₈Nb₁₈O₅₇. The fourth ternary phase found in this system is pyrochlore (A₂B₂O₆O′), which forms an extensive solid solution region at Bi-deficient stoichiometries (relative to Bi₂FeNbO₇) suggesting that ≈4-15% of the A-sites are occupied by Fe³⁺. X-ray powder diffraction data confirmed that all Bi-Fe-Nb-O pyrochlores form with positional displacements, as found for analogous pyrochlores with Zn, Mn, or Co instead of Fe. A structural refinement of the pyrochlore 0.4400:0.2700:0.2900 Bi₂O₃:Fe₂O₃:Nb₂O₅ using neutron powder diffraction data is reported with the A cations displaced (0.43 Å) to 96g sites and O′ displaced (0.29 Å) to 32e sites (Bi_1.721Fe_0.190(Fe_0.866Nb_1.134)O₇, Fd3¯m (#227), ). This displacive model is somewhat different from that reported for Bi_1.5Zn_0.92Nb_1.5O_6.92, which exhibits twice the concentration of small B-type cations on the A-sites as the Fe system. Bi-Fe-Nb-O pyrochlores exhibited overall paramagnetic behavior with large negative Curie-Weiss temperature intercepts, slight superparamagnetic effects, and depressed observed moments compared to high-spin, spin-only values. The single-phase pyrochlore with composition Bi_1.657Fe_1.092Nb_1.150O₇ exhibited low-temperature dielectric relaxation similar to that observed for Bi_1.5Zn_0.92Nb_1.5O_6.92; at 1 MHz and 200 K the relative permittivity was 125, and above 350 K conductive effects were observed.     

IrSr2TbCu2O8, a high-pressure metamagnetic cuprate: Structure, microstructure and properties

The synthesis, structure and microstructure of the IrSr₂TbCu₂O₈ cuprate showing metamagnetic properties are described. The sample was prepared at high temperatures and pressures up to 9.2 GPa. The structure is tetragonal, showing a 1212 type structure, that derives from the classical YBaCuO superconductor structure, replacing the tetracoordinated square planar copper [Cu-O₄] in the “chains” by octahedral [Ir-O₆] groups that form a perovskite-like layer in the basal plane of the unit cell. A “simple” cell, ∼a_p×a_p×3a_p, where a_p is the basic perovskite unit cell parameter (a_p∼3.8 Å), is supported by X-ray powder diffraction (XRD) and a so-called “diagonal” one, ∼√2a_p×√2a_p×3a_p, by SAED; a microdomain texture of latter cell and a series of very interesting extended defects have been observed by HREM. Magnetic susceptibility measurements show a magnetic transition, T_N∼6 K, with negative Weiss temperature, that indicates antiferromagnetic interactions among the Tb moments. The magnetic structure has been determined by neutron diffraction. A detailed magnetic study has revealed a metamagnetic behavior, something not previously observed in this type of cuprates. Specific heat and resistivity measurements have also been performed to characterize the transition.     

Synthesis, structure and physical properties of GdCu4Al and GdCu4Ga

Two non-stoichiometric Gd compounds, GdCu_5−xTr_x (Tr=Al, Ga) have been synthesized from the corresponding elements by high temperature reactions in sealed tantalum containers. They crystallize in the hexagonal CaCu₅-type (Pearson's symbol hP6, space group P6/mmm, No. 191) with lattice parameters determined from single-crystal X-ray diffraction at room temperature as follows: a=5.0831(10) Å; c=4.156(2) Å for GdCu_3.98(4)Al_1.02(4), and a=5.1025(10) Å; c=4.155(2) Å for GdCu_3.9(1)Ga_1.1(1), respectively. Structure refinements from single crystal X-ray diffraction data reveal that substitution of Cu for Al or Ga takes place preferably on one of the two transition metal sites with site symmetry mmm (3g). Both compounds order antiferromagnetically below ∼40 K and ∼36 K, respectively, as determined from temperature dependent dc-magnetization, resistivity and heat-capacity measurements.     

Polymorphism of the iron doped strontium aluminate SrAl1.5Fe0.5O4

The partial substitution of Al by Fe atoms in SrAl₂O₄ allowed to stabilize four stuffed tridymite derivative structures SrAl_1.5Fe_0.5O₄. The different phases have been characterized by TEM and XRPD techniques. Two are isotypes of those observed for the undoped oxides, namely the hexagonal phase with A×A×C (with A and C being the tridymite unit cell parameters) and space group P6₃ and the monoclinic one with A×A×C, β≈93° and space group P2₁, with a synthesis temperature lower than the one required for SrAl₂O₄. By annealing, two original phases, denoted O₁ and O₂, are obtained; they are metrically similar (3A×A×C and β≈90°) and only differ by their space groups. The TEM study showed that the transitions between the different phases follow topotactic mechanisms, through the formation of twinning boundaries, antiphase boundaries and planar defects. The annealed sample exhibits a mesomorph state and a reversible transition from this semi-ordered state to a crystalline phase. This dynamic transition takes place over a very wide temperature range from 620 to 1120 °C. The reversibility of the transition has been studied by DSC measurements. The crystallization energy of the orthorhombic phases is of the order of 10 J/g, at T≈622 °C as T decreases. The variation of the peak height observed as the annealing temperature increases is explained by the complex microstructures, which create an ill-defined energy barrier. Structural models related to the stuffed tridymite derivative structures are proposed for the new forms of the ferri-aluminate.     

Order-disorder transition in the complex lithium spinel Li2CoTi3O8

Li₂CoTi₃O₈ has an ordered Li₂BB′₃O₈ spinel structure, space group P4₃32, at room temperature with 3:1 ordering of Ti and Li on the octahedral sites, and Li, Co disordered over the tetrahedral site. Rietveld refinement of variable temperature neutron powder diffraction data has shown an order-disorder phase transition in Li₂CoTi₃O₈ which commences at ∼500 °C with Li and Co mixing on the tetrahedral and 4-fold octahedral sites and is complete at a first order structural discontinuity at ∼915 °C. The fraction of Ti on the 12-fold octahedral site exhibits a small decrease with increasing temperature, which may suggest that the disordering involves all three cations. Above 930 °C, the structure, space group Fd3¯m, has Li, Co and Ti sharing a single-octahedral site and Li, Co sharing a tetrahedral site, although Co still exhibits a preference for tetrahedral coordination. A labelling scheme for ordered and partially ordered 3:1 spinels is devised which focuses on the occupancy of the Li,B cations.