Obtaining 4-vinylphenols by decarboxylation of natural 4-hydroxycinnamic acids under microwave irradiation

4-Vinylphenols, useful compounds for industrial applications, were obtained by decarboxylation of 4-hydroxycinnamic acids under microwave irradiation in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as base and basic aluminum oxide as solid support. The reactions were fast (15-30 min). The selective extraction of the final products with ethyl acetate avoids chromatographic purifications. The conversions are quantitative and the yields are satisfactory. Only the unstable 4-vinylcatechol was obtained in moderate yield. This procedure was successfully extended to a natural sample of ferulic acid extracted from wheat bran to get the corresponding 4-vinylguaiacol, a FEMA GRAS (Flavor and Extract Manufacturer's Association; General Regarded as Safe) approved flavoring agent.     

A density functional theory computational study of the role of ligand on the stability of CuI and CuII species associated with ATRP and SET‐LRP

Atom transfer radical polymerization (ATRP) and single electron‐transfer living radical polymerization (SET‐LRP) both utilize copper complexes of various oxidation states with N‐ligands to perform their respective activation and deactivation steps. Herein, we utilize DFT (B3YLP) methods to determine the preferred ligand‐binding geometries for Cu/N‐ligand complexes related to ATRP and SET‐LRP. We find that those ligands capable of achieving tetrahedral complexes with Cu^I and trigonal bipyramidal with axial halide complexes with [Cu^IIX]⁺ have higher energies of stabilization. We were able to correlate calculated preferential stabilization of [Cu^IIX]⁺ with those ligands that perform best in SET‐LRP. A crude calculation of energy of disproportionation revealed that the same preferential binding of [Cu^IIX]⁺ results in increased propensity for disproportionation. Finally, by examining the relative energies of the basic steps of ATRP and SET‐LRP, we were able to rationalize the transition from the ATRP mechanism to the SET‐LRP mechanism as we transition from typical nonpolar ATRP solvents to polar SET‐LRP solvents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4950–4964, 2007     

Synthesis of poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) by the competitive single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization in water

The synthesis of a block copolymer poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) is reported. This new material was synthesized by single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization (SET‐DTLRP) in two steps. First, a bifunctional macroinitiator of α,ω‐di(iodo)poly (butyl acrylate) [α,ω‐di(iodo)PBA] was synthesized by SET‐DTLRP in water at 25 °C. The macroinitiator was further reinitiated by SET‐DTLRP, leading to the formation of the desired product. This ABA block copolymer was synthesized with high initiator efficiency. The kinetics of the copolymerization reaction was studied for two PBA macroinitiators with number–average molecular weight of 10 k and 20 k. The relationship between the conversion and the number–average molecular weight was found to be linear. The dynamic mechanical thermal analysis suggests just one phase, indicating that copolymer behaves as a single material with no phase separation. This methodology provides the access to several block copolymers and other complex architectures that result from combinations of thermoplastics (PVC) and elastomers (PBA). From industrial standpoint, this process is attractive, because of easy experimental setup and the environmental friendly reaction medium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3001–3008, 2006     

Single electron transfer–degenerative chain transfer living radical polymerization of N‐butyl acrylate catalyzed by Na2S2O4 in water media

Living radical polymerization of n‐butyl acrylate was achieved by single electron transfer/degenerative‐chain transfer mediated living radical polymerization in water catalyzed by sodium dithionate. The plots of number–average molecular weight versus conversion and ln[M]₀/[M] versus time are linear, indicating a controlled polymerization. This methodology leads to the preparation of α,ω‐di(iodo) poly (butyl acrylate) (α,ω‐di(iodo)PBA) macroinitiators. The influence of polymerization degree ([monomer]/[initiator]), amount of catalyst, concentration of suspending agents and temperature were studied. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right‐angle light scattering (RALLS), a differential viscometer (DV), and refractive index (RI). The methodology studied in this work represents a possible route to prepare well‐tailored macromolecules made of butyl acrylate in an environmental friendly reaction medium. Moreover, such materials can be subsequently functionalized leading to the formation of different block copolymers of composition ABA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2809–2825, 2006     

Functional polymers and sequential copolymers by phase transfer catalysis. XXVIII. Synthesis and characterization of alternating block copolymers and polyformals of polyisobutylene and aromatic polyether sulfone

Alternating—i.e., -(A-B)_n- type—block copolymers of polyisobutylene (PIB) and aromatic polyether sulfone (PSU) have been prepared by phase transfer catalyzed Williamson polyetherification of α,ω-di(phenol)PIB with α,ω-di(chloroallyl)- or -(bromobenzyl)PSU. Block copolymers of the two prepolymers were also synthesized by the phase transfer catalyzed polyetherification of methylene chloride with α,ω-di(phenol)PIB and α,ω-di(phenol)PSU (bisphenol-A-terminated PSU). This method leads to -[(A)_x-(B)_y]_n- block copolymers with formal linkages between segments. At sufficiently high segment lengths, both types of block copolymers exhibit two distinct T_gs, indicating phase separation into rubbery PIB and glassy PSU domains.     

Functional polymers and sequential copolymers by phase transfer catalysis. XXVI. Synthesis and characterization of thermotropic liquid crystalline polypodants

Thermotropic liquid crystalline (LC) polyethers and copolyethers have been synthesized from 4,4′-dihydroxy-α-methylstilbene (HMS) and α,ω-dichlorooligo(oxyethylene)s having between 2 and 5 as well as 8.7 oxyethylene units. Copolyethers were prepared from a 1:1 mol/mol ratio of two dissimilar spacers. These polymers have been prepared by a phase transfer catalyzed (PTC) polyetherification of bisphenols with these electrophiles by utilizing 50 mol% tetrabutylammonium hydrogen sulfate per phenol group. Kinetic experiments with either 5 or 50 mol% catalyst vs phenol groups in the polyetherification of 4,4%-isopropylidenediphenol with 2-chloroethyl ether have shown that a change in catalyst primarily affects the rate of reaction, with 50 mol % being faster. The prepared polyethers and copolyethers are soluble in common organic solvents. Both polyethers and copolyethers are crystalline. Polymers prepared to contain tetraoxyethylene spacers exhibit monotropic LC behavior. Copolymers prepared to contain tri- and tetraoxyethylene spacers (1 : 1 mol/mol) [PE34] were the only polymers exhibiting enantiotropic LC behavior. Longer spacers tend to destabilize the phase transitions, as suggested by the dependence of thermal transition temperatures upon the differential scanning calorimeter rate. All prepared polymers act as podants in solution, measured by picrate extraction experiments. Solid state complexes have been prepared from the polymer with a pentaoxyethylene spacer [PE5] and PE34 with LiCF₃SO₃. PE5 can dissolve LiCF₃SO₃ in the range of 0.21–2.2 mol salt/mol polymer (m.r.u.) [S/P] without the observation of free salt. PE5 complexes of/or below S/P of 0.43, upon annealing at room temperature, exhibited the two melting transitons observed in the polymer alone. PE5 complexes of/or above S/P of 0.77 only exhibited a T_g. The T_g of PE5 complexes were found to change nonlinearly with S/P, while T_m1 changed linearly. T_m2 was independent of S/P. Only one complex with PE34 gave two transitions (T_m2,Tⁱ) in dynamic DSC experiments. Other PE34 complexes followed a behavior similar to PE5 complexes.     

Phase transfer catalyzed polymerization of 4-bromo-2,6-dimethylphenol in the presence of either 2,4,6-trimethylphenol or 4-tert-butyl-2,6-dimethylphenol

The synthesis of poly(2,6-dimethyl-1,4-phenylene oxide) with one 2,6-dimethylphenol chain end (PPO–OH) and with well-defined molecular weight by phase transfer catalyzed polymerization of 4-bromo-2,6-dimethylphenol ( 20 ) in the presence of either 2,4,6-trimethylphenol ( 1 ) or 4-t-butyl-2,6-dimethylphenol ( 1 ′) as chain initiators is described. The range of controllable molecular weights and the mechanism of molecular weight control are discussed based on the differences between the reactivities of 20 , 1 , and 1 ′ and of the corresponding reactive species. The PPO–OH synthesized from 20 / 1 ′ has structural units derived from 1 ′ attached only at the chain end. PPO–OH synthesized from 20 / 1 contains structural units derived from 1 both internally and at the chain ends. Structural units derived from side reactions were identified by ¹H-NMR spectroscopy. A reaction mechanism is proposed to account for their formation.     

Living polymerization of aryl substituted acetylenes by MoCl5 and WCl6 based initiators: The ortho phenyl substituent effect

The polymerization of phenylacetylene initiated by MoCl₅ and WCl₆ based initiators was monitored directly in the NMR sample tube and demonstrated the presence of backbiting and intramolecular cyclization reactions. It was shown that the ratio of cis to trans structural units obtained by isomerization prior to double bond formation dictates the degree of backbiting and intramolecular cyclization reactions. This cis–trans ratio determines the length of cis–transoidal sequences present in the polymer backbone which are available for both backbiting and intrachain cyclization reactions. The cyclic trimers obtained in the metathesis polymerization of phenylacetylene are formed only through the cis–cisoidal-induced backbiting and/or intramolecular reactions. The o-trimethylsilylphenylacetylene follows a living mechanism of polymerization. This is due to the fact that the size of the ortho substituent suppresses the cis–transoidal to cis–cisoidal isomerization reactions and therefore eliminates the backbiting reactions. The steric hindrance provided by the size of the ortho substituent also eliminates interchain and intrachain reactions.     

Carbon-13 and nitrogen-15 nuclear magnetic resonance of physostigmine (eserine)

The ¹⁵N and ¹³C nmr spectra of physostigmine are discussed along with complete assignment of the signals. This alkaloid ¹⁵ N nmr spectrum is notable because it contains nitrogens in three different environments.     

Phase transfer Pd(O) catalyzed polymerization reactions. I. Synthesis of 1,2-(4,4′;-dialkoxyaryl) acetylene monomers and 1,4-Bis[2-(4′,4″-dialkoxyphenyl)ethynyl]benzene derivatives by phase transfer Pd(O)/Cu(I) catalyzed coupling reactions

Several 1,2-(4,4'-dialkoxyaryl)acetylene monomers containing similar or dissimilar substituents were prepared by one of three variations of a one pot phase transfer Pd(O)/Cu(I) catalyzed coupling of aryl halides with a protected acetylene. The three steps within a single flask involved first coupling of the appropriate 1-halo-4-alkoxybenzene derivative with 2-methyl-3-butyn-2-ol, followed by cleavage of the carbinol group to form an aryl acetylide, and finally a second coupling of an aryl halide with the aryl acetylide. Best results were obtained when elevated temperatures and solid-liquid phase transfer reaction conditions were used. Some 1,4-bis[2-(4',4”-dialkoxyphenyl)ethynyl]benzene compounds were also prepared.