Phase behavior in mixtures of a homopolymer and a block copolymer 1. FTIR and DSC studies

Miscibility in blends of three styrene-butadiene-styrene and one styrene-isoprene-styrene triblock copolymers containing 28%, 30%, 48%, and 14% by weight of polystyrene, respectively, with poly(vinyl methyl ether) (PVME) were investigated by FTIR spectroscopy and differential scanning calorimetry (DSC). It was found from the optical clarity and the glass transition temperature behavior that the blends show miscibility for each kind of triblock copolymers below a certain concentration of PVME. The concentration range to show miscibility becomes wider as the polystyrene content and molecular weight of PS segment in the triblock copolymers increase. From the FTIR results, the relative peak intensity of the 1100 cm^-1 region due to COCH₃ band of PVME and peak position of 698 cm^-1 region due to phenyl ring are sensitive to the miscibility of SBS(SIS)/PVME blends. The results show that the miscibility in SBS(SIS)/PVME blends is greatly affected by the composition of the copolymers and the polystyrene content in the triblock copolymers. Molecular weights of polystyrene segments have also affected the miscibility of the blends. ©1995 John Wiley & Sons, Inc.     

Blends Based on Polystyrene and Statistical Aromatic Copolycarbonates

The compatibility of polystyrene (PS) with aromatic copolycarbonates containing bisphenol A (BPA) and tetramethyl bisphenol A (TMBPA) was investigated. The simple prevision scheme developed by Sonja Krause was employed to evaluate the effect of the copolymer molecular structure on the miscibility with polystyrene. These prevision data were used to select copolycarbonates of potential interest. Statistical copolycarbonates (CPC) containing different BPA/TMBPA molar ratios were synthesised by polycondensation reaction between a mixture of the two monomers and phosgene. PS/polycarbonates blends, prepared by casting from chloroform solution, were studied with differential scanning calorimetry and optical microscopy to evaluate the components compatibility, which increases with the TMBPA copolymer content.     

Nanostructured thermoset epoxy resin templated by an amphiphilic poly(ethylene oxide)‐block‐poly(dimethylsiloxane) diblock copolymer

An amphiphilic poly(ethylene oxide)‐block‐poly(dimethylsiloxane) (PEO–PDMS) diblock copolymer was used to template a bisphenol A type epoxy resin (ER); nanostructured thermoset blends of ER and PEO–PDMS were prepared with 4,4′‐methylenedianiline (MDA) as the curing agent. The phase behavior, crystallization, hydrogen‐bonding interactions, and nanoscale structures were investigated with differential scanning calorimetry, Fourier transform infrared spectroscopy, transmission electron microscopy, and small‐angle X‐ray scattering. The uncured ER was miscible with the poly(ethylene oxide) block of PEO–PDMS, and the uncured blends were not macroscopically phase‐separated. Macroscopic phase separation took place in the MDA‐cured ER/PEO–PDMS blends containing 60–80 wt % PEO–PDMS diblock copolymer. However, the composition‐dependent nanostructures were formed in the cured blends with 10–50 wt % PEO–PDMS, which did not show macroscopic phase separation. The poly(dimethylsiloxane) microdomains with sizes of 10–20 nm were dispersed in a continuous ER‐rich phase; the average distance between the neighboring microdomains was in the range of 20–50 nm. The miscibility between the cured ER and the poly(ethylene oxide) block of PEO–PDMS was ascribed to the favorable hydrogen‐bonding interaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3042–3052, 2006     

Polycaprolactone/polystyrene bioblends characterized by thermogravimetry, modulated differential scanning calorimetry and infrared photoacoustic spectroscopy

Polymer blends comprising at least one biodegradable polymer with other polymers are referred to as bioblends. Successful development of bioblends requires the biodegradable polymers to be compatible with other polymer components. Compatibility is normally assessed through the evaluation of the degree of intermolecular interactions between individual components. In this work, the degree of interaction in binary bioblends comprising biodegradable polycaprolactone (PCL) and polystyrene (PS) was investigated using thermogravimetric analysis (TGA), modulated differential scanning calorimetry (MDSC) and Fourier transform infrared photoacoustic spectroscopy (FTIR-PAS). The TGA studies indicated that incorporation of PCL in PS results in thermal destabilization of PCL/PS bioblends. The MDSC studies showed that some parameters, such as the enthalpies of melting and crystallization, favored partial miscibility of PS in PCL, while others, such as change in the glass transition temperature, favored immiscibility. The FTIR-PAS spectra suggested the presence of intermolecular n-π interactions between PCL and PS and supported the results of TGA and MDSC analyses of PCL/PS bioblends.     

Hydrogen bonding interactions,crystallization, and surface hydrophobicity in nanostructured epoxy/block copolymer blends

Hydrogen bonding interactions, phase behavior, crystallization, and surface hydrophobicity in nanostructured blend of bisphenol A‐type epoxy resin (ER), for example, diglycidyl ether of bisphenol A (DGEBA) and poly(ε‐caprolactone)‐block‐poly(dimethyl siloxane)‐block‐poly(ε‐caprolactone) (PCL–PDMS–PCL) triblock copolymer were investigated by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry, transmission electron microscopy, small‐angle X‐ray scattering, and contact angle measurements. The PCL–PDMS–PCL triblock copolymer consisted of two epoxy‐miscible PCL blocks and an epoxy‐immiscible PDMS block. The cured ER/PCL–PDMS–PCL blends showed composition‐dependent nanostructures from spherical and worm‐like microdomains to lamellar morphology. FTIR study revealed the existence of hydrogen bonding interactions between the PCL blocks and the cured epoxy, which was responsible for their miscibility. The overall crystallization rate of the PCL blocks in the blend decreased remarkably with increasing ER content, whereas the melting point was slightly depressed in the blends. The surface hydrophobicity of the cured ER increased upon addition of the block copolymer, whereas the surface free energy (γ_s) values decreased with increasing block copolymer concentration. The hydrophilicity of the epoxy could be reduced through blending with the PCL–PDMS–PCL block copolymer that contained a hydrophobic PDMS block. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 790–800, 2010     

Thermal behavior of blends based on a thermoplastic-modified epoxy resin with a crosslinking density variation

The thermal behavior of blends based on a polystyrene (PS) and several epoxy-amine systems where amino groups were provided by a monoamine (MA) and a diamine (DA) mixed in different proportions was investigated. This way, the crosslinking density of epoxy-amine polymer was controlled and continuously changed from a linear polymer (epoxy-MA) to a highly crosslinked polymer (epoxy-DA). The effect of the MA–DA proportion and PS modifier on the thermal stability, glass transition, and polymerization reaction was studied by differential scanning calorimetry and thermogravimetric analysis. The MA–DA ratio and modifier proportion did not affect the reaction heat but affected the reactivity. The thermal stability and glass transition temperature increased by increasing the DA proportion in the blend as a result of the higher degree of crosslinking. A study of miscibility of blends based on glass transitions was performed. The thermoplastic-modified materials generally showed two glass transitions with values close to the those of the pure materials, indicating that the mixtures were separated into phases.     

Miscibility in Low Molecular Mass Liquid Crystal-semicrystalline Polymer Blends

Miscibility in blends of semicrystalline polymers (poly(ethylene) adipate and poly(tetrahydrofuran)) and liquid crystal cholesteryl palmitate was investigated by means of differential scanning calorimetry and polarizing optical microscopy. Some(concentration-dependent) miscibility was found. A more pronounced miscibility exhibits the polyester-based blends probably due to the similar chemical structure of the two components and stronger interactions between the two components. This revised version was published online in July 2006 with corrections to the Cover Date.     

Morphology,crystallization and melting behaviour of poly(trimethylene terephthalate)/thermotropic liquid crystalline polymer blends

The miscibility, crystallization and melting behaviour of poly(trimethylene terephthalate)/thermotropic liquid crystalline polymer (LCP) blends were studied using differential scanning calorimetry. The blends were found to form primarily an immiscible system. The addition of LCP accelerated the overall rate of crystallization and caused a depression in equilibrium melting temperature, especially at low LCP content. Lauritzen–Hoffman analysis showed that the addition of LCP caused a reduction in the fold surface energy and increased the regime II to III transition temperature.

     

Effects of organoclays on morphology and thermal and rheological properties of polystyrene and poly(methyl methacrylate) blends

Morphology, thermal and rheological properties of polymer‐organoclay composites prepared by melt‐blending of polystyrene (PS), poly(methyl methacrylate) (PMMA), and PS/PMMA blends with Cloisite® organoclays were examined by transmission electron microscopy, small‐angle X‐ray scattering, secondary ion mass spectroscopy, differential scanning calorimetry, and rheological techniques. Organoclay particles were finely dispersed and predominantly delaminated in PMMA‐clay composites, whereas organoclays formed micrometer‐sized aggregates in PS‐clay composites. In PS/PMMA blends, the majority of clay particles was concentrated in the PMMA phase and in the interfacial region between PS and PMMA. Although incompatible PS/PMMA blends remained phase‐separated after being melt‐blended with organoclays, the addition of organoclays resulted in a drastic reduction in the average microdomain sizes (from 1–1.5 μm to ca. 300–500 nm), indicating that organoclays partially compatibilized the immiscible PS/PMMA blends. The effect of surfactant (di‐methyl di‐octadecyl‐ammonia chloride), used in the preparation of organoclays, on the PS/PMMA miscibility was also investigated. The free surfactant was more compatible with PMMA than with PS; the surfactant was concentrated in PMMA and in the interfacial region of the blends. The microdomain size reduction resulting from the addition of organoclays was definitely more significant than that caused by adding the same amount of free surfactant without clay. The effect of organoclays on the rheological properties was insignificant in all tested systems, suggesting weak interactions between the clay particles and the polymer matrix. In the PS system, PMMA, and organoclay the extent of clay exfoliation and the resultant properties are controlled by the compatibility between the polymer matrix and the surfactant rather than by interactions between the polymer and the clay surface. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 44–54, 2003     

Transmission electron microscopy study of phase morphology in polypropylene/ethylene-octene copolymer blends

Blends of polypropylene (PP) and ethylene-octene copolymers (EOC) were investigated by transmission electron microscopy (TEM) and by differential scanning calorimetry (DSC). The EOC contained 28, 37, 40 or 52 wt% of octene. Only the 50/50 PP/EOC ratio was used for all blends. None of the blends was fully miscible, there was always two-phase morphology. TEM observation followed by image analysis by ImageJ software revealed that the largest particles were in blend containing EOC-28 and the smallest were in blend with EOC-52. The coarsening rate at 200 °C was evaluated by TEM. The glass transition temperature (T_g) shift indicated partial miscibility. Partial miscibility was then confirmed by direct observation of bright PP lamellae in EOC dark phase.     

The effect of compatibilization and rheological properties of polystyrene and poly(dimethylsiloxane) on phase structure of polystyrene/poly(dimethylsiloxane) blends

The compatibilization effect of polystyrene (PS)‐poly(dimethylsiloxane) (PDMS) diblock copolymer (PS‐b‐PDMS) and the effect of rheological properties of PS and PDMS on phase structure of PS/PDMS blends were investigated using a selective extraction technique and scanning electron microscopy (SEM). The dual‐phase continuity of PS/PDMS blends takes place in a wide composition range. The formation and the onset of a cocontinuous phase structure largely depend on blend composition, viscosity ratio of the constituent components, and addition of diblock copolymers. The width of the concentration region of the cocontinuous structure is narrowed with increasing the viscosity ratio of the blends and in the presence of the small amount diblock copolymers. Quiescent annealing shifts the onset values of continuity. The experimental results are compared with the volume fraction of phase inversion calculated with various theoretical models, but none of the models can account quantitatively for the observed data. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 898–913, 2004     

Complex cold crystallisation peaks in PET/PS blends

This work describes the investigation of complex peaks observed during the cold crystallisation of polyethylene terephthalate (PET) blended with polystyrene (PS). Blends of PET with 1% to 15% PS content were compounded in a laboratory internal mixer and quenched from the melt to produce substantially amorphous samples. The cold crystallisation behaviour was studied using differential scanning calorimetry (DSC) conducted at 10 °C/min. The complex peaks of the PET/PS blends were resolved as the sum of two simple peaks, and the component peak characteristics were determined. While the total crystallinity was found to be independent of the PS content, the areas under the component peaks depend on the amorphous component content. A simple model based on partial dissolution and micro-segregation of PS is proposed to qualitatively explain the presence of the double cold crystallisation peaks.     

Kinetic investigation on the curing of ethylene methyl acrylate—Polydimethyl siloxane rubber blends by differential scanning calorimetry

Curing reactions of ethylene methyl acrylate (EMA) polydimethyl siloxane (PDMS) rubber blends have been investigated by differential scanning calorimetry (DSC) and by Rheometry. The curing exoterms obtained from DSC curves have been analysed to derive the kinetic parameters associated with the curing process. Crosslinking of EMA-PDMS rubber blends follow first order kinetics. The effect of blend ratio and peroxide concentration on the crosslinking characteristics of the blends have also been investigated. Department of Metallurgical Engineering     

Miscibility studies of PVC/Aramid blends

Blends containing PVC and aramid (Ar) matrices were probed for their miscibility. In this respect, Ar chains were synthesized by aromatic diamine and diacid chloride in amide solvent. The Ar thus synthesized was characterized through Fourier transform infrared (FTIR) spectroscopy and molecular weight determination. Blend system Ar/PVC was investigated over a range of Ar/PVC ratios. Their mechanical profiles in terms of maximum stress, maximum strain, toughness, and initial moduli have been explored. Thermal properties and morphology of the blends were estimated using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). A good correlation was observed between thermal, mechanical, and morphological properties of the blends. The presence of hydrogen bonding among polymers was evaluated through FTIR spectroscopy, which is believed to be responsible for the blend miscibility. Optimal thermal and mechanical profiles were depicted by the blend containing 40-wt% PVC in the Ar matrix.     

The evaluation of miscibility of blends of poly(ether imide) (Ultem1000) and a copolyester of bisphenol-A with terephthalic and isophthalic acid (ArdelD-100) by viscosimetry

The intermolecular interactions and miscibility behavior between poly(ether imide) (Ultem^®1000) and a copolyester of bisphenol-A with a mixture of terephthalic and isophthalic acid (Ardel^®D-100) in compositions of 100/0, 80/20, 60/40, 40/60, 20/80 and 0/100 have been investigated in dilute solutions in chloroform. An Ubbelohde-type home-made viscometer was used to determine the specific viscosities of the blends in a constant temperature bath. Several viscosity interaction parameters used as the criteria of miscibility were determined from viscosity measurements. The parameters suggested that Ultem^®1000 and Ardel^®D-100 were miscible. The miscibility of the polymers was confirmed by the results of differential scanning calorimetry measurements.     

Phase behavior of blends of PCBM with amorphous polymers with different aromaticity

The phase behavior of [6,6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) blends with amorphous polymers with different degrees of aromaticity has been investigated by differential scanning calorimetry (DSC) and small‐angle neutron scattering (SANS). The polymers investigated are the homologous series of polystyrene (PS), poly(2‐vinyl‐naphthalene) (P2VN), and poly(9‐vinyl‐phenanthrene) (P9VPh). The DSC results show that the miscibility of PCBM in these polymers increases nonlinearly from 16.5 wt % in PS, 57.0 wt % in P2VN, and 74.9 wt % in P9VPh. The SANS results show that at all concentrations of PCBM, the blends are composed of two mixed phases. Analysis shows that the phase dimensions remain largely independent of PCBM content, but there is a strong dependence of the PCBM concentration difference in the two phases with increasing PCBM content. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 994–1001     

Miscible blends of poly(vinyl phenyl ketone) and poly(4‐vinyl phenol)

An analysis by differential scanning calorimetry, modulated differential scanning calorimetry, and Fourier transform infrared spectroscopy (FTIR) indicates that blends of poly(vinyl phenyl ketone) (PVPhK) and poly(4‐vinyl phenol) (P4VPh) are miscible at ambient temperature. Miscibility, ascertained, is supported by the existence of a single glass transition for each composition of the PVPhK/P4VPh blends. The FTIR spectroscopy analysis demonstrates the formation of hydrogen bonds between carbonyl groups of PVPhK and hydroxyl groups of P4VPh. This specific interaction has a crucial role on the miscibility behavior of PVPhK/P4VPh blends. The evolution of the glass transition of the PVPhK, P4VPh, and its blends as a function of mixture composition shows negative deviations with to respect to the ideal mixing rule, and both Fox and Gordon–Taylor equations predict this behavior successfully. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2404–2411, 2006     

DSC and p-V-T Study of PVC/PMMA Blends

Poly(vinyl chloride)/Poly(methyl methacrylate) — PVC/PMMA — blends were investigated by comparative p-V-T and differential scanning calorimetry (DSC) measurements. The study was concentrated on the glass transition range of the blends, and it was found that the blends are characterized by a single glass transition temperature suggesting miscibility of the blend components. It is shown that the glass temperature of the blends increases with both increasing heating rate and pressure. In parallel hereto one observes a decrease in the volume expansion coefficients, which is more accentuated for the polymeric melts than for the polymeric glasses. The dependence of the glass temperature on the composition of the polymer blends shows a sigmoidal behaviour which is due to the fact that positive deviations of the glass temperature from values predicted by additivity rules are observed in the high PVC concentration range, whereas in the high PMMA range negative deviations occur. This suggests a denser packing of the blends and thus a stronger interaction between the blend components in the high PVC concentration range. These packing differences increase with increasing pressure and decreasing heating rate and are generally more accentuated for the glass temperatures evaluated from p-V-T measurements.This revised version was published online in November 2005 with corrections to the Cover Date.     

The assessment of miscibility and morphology of poly(ε-caprolactone) and poly(para-chlorostyrene) blends

The miscibility and morphology of poly(ε-caprolactone) (PCl) and poly(para-chlorostyrene) (PpClS) blend were investigated by using thermal analysis, morphological analysis, viscometry, and the study of melting point depression. A single glass transition temperature was observed by differential scanning calorimetry (DSC) for PCl/PpClS blends in the whole compositional range (0/100, 25/75, 50/50, 62.5/37.5, 75/25, 90/10). Morphology of the polymers and their blends was studied by scanning electron microscopy (SEM). The Fourier transform infrared spectra of the samples were obtained by spectrometer. Up to 12 cm⁻¹ shifts in carbonyl stretching band of PCl was detected in the spectra of PpClS rich blends. The viscosity of PCl, PpClS and their blends has also been studied to investigate the miscibility according the miscibility criteria Δb, and Δ[η]. Using this data, the interaction parameters α and μ, based on the Chee and Sun et al. approaches were determined. These criteria indicated that the blend is miscible in all proportions up to 90% of PCl content in the blends. The melting point depression of PCl in the blends was examined to obtain the interaction parameter, χ₁₂ for this system. The parameter, χ₁₂ was found to be composition dependent. Negative values of the obtained interaction parameter also support the miscibility of this system up to the 90% PCl in the blend.     

Polymer-polymer miscibility in blends of a new poly(aryl ether ketone) with poly(ether imide)

Polymer miscibility was found for a blend system comprising of a new poly(aryl ether ketone) and a poly(ether imide). Phase homogeneity was preliminarily confirmed using optical and scanning electron microscopy, indicating that the scales of phase homogeneity in the blends were beyond the resolution limits of either microscopy. A composition-dependent, single glass transition temperature (T_g) in the PAEK/PEI blends within the full range of composition was observed using differential scanning calorimetry (DSC). The thermal transition breadth also suggests that the scales of mixing are fine and uniform.