New benchmark solutions for free vibration of clamped rectangular thick plates and their variants

It is of significance to explore benchmark analytic free vibration solutions of rectangular thick plates without two parallel simply supported edges, because the classic analytic methods are usually invalid for the problems of this category. The main challenge is to find the solutions meeting both the governing higher order partial differential equations (PDEs) and boundary conditions of the plates, i.e., to analytically solve associated complex boundary value problems of PDEs. In this letter, we extend a novel symplectic superposition method to the free vibration problems of clamped rectangular thick plates, with the analytic frequency solutions obtained by a brief set of equations. It is found that the analytic solutions of clamped plates can simply reduce to their variants with any combinations of clamped and simply supported edges via an easy relaxation of boundary conditions. The new results yielded in this letter are not only useful for rapid design of thick plate structures but also provide reliable benchmarks for checking the validity of other new solution methods.     

弹性厚矩形板受迫振动的功的互等定理法

本文将功的互等定理法（ＲＴＭ）推广应用于求解基于Ｒｅｉｓｓｎｅｒ理论的厚矩形板受迫振动问题·本文导出了厚矩形板动力基本解；给出了三边固定一边自由厚矩形板在均布简谐干挠力作用下稳态响应的精确解析解·这是计算厚矩形板受振动稳态响应的一个简便通用的方法·     

矩形板不对称侧向屈曲中若干问题

本文用能量法研究了矩形板不对称侧向屈曲的几个问题,文中讨论了具有不对称支承的矩形板分别在有集中力,均布荷载及集中力偶作用之下发生不对称侧向屈曲时的最小的临界荷载.     

Modified mixed Ritz-DQ formulation for free vibration of thick rectangular and skew plates with general boundary conditions

Recently, the present authors proposed a simple mixed Ritz-differential quadrature (DQ) methodology for free and forced vibration, and buckling analysis of rectangular plates. In this technique, the Ritz method is first used to discretize the spatial partial derivatives with respect to a coordinate direction of the plate. The DQ method is then employed to analogize the resulting system of ordinary or partial differential equations. The mixed method was shown to work well for vibration and buckling problems of rectangular plates with simple boundary conditions. But, due to the use of conventional Ritz method in one coordinate direction of the plate, the geometric boundary conditions of the problem can only be satisfied in that direction. Therefore, the conventional mixed Ritz-DQ methodology may encounter difficulties when dealing with rectangular plates involving adjacent free edges and skew plates. To overcome this difficulty, this paper presents a modified mixed Ritz-DQ formulation in which all the natural boundary conditions are exactly implemented. The versatility, accuracy and efficiency of the proposed method for free vibration analysis of thick rectangular and skew plates are tested against other solution procedures. It is revealed that the proposed method can produce highly accurate solutions for the natural frequencies of thick rectangular plates involving adjacent free edges and skew plates using a small number Ritz terms and DQ sampling points.     

求解厚矩形板弯曲问题的功的互等定理法

在本文中,功的互等定理法(RTM)被推广于求解基于Reissner理论的厚矩形板弯曲问题。首先,本文绘出了厚矩形板弯曲的基本解;其次,给出了三边固定一边自由在均布载荷作用下厚矩形板弯曲的精确解析解;最后,我们分析了本文解的数值结果。     

均布荷载下悬臂矩形板的弯曲

在薄板理论中,悬臂矩形板的弯曲,长期以来是个难题,因而,现有的解均属于近似解,如列出几位曾解过这问题的作者,可提到L.V.Kantorovich,D.L.Holl,W.A.Nash,H.J.Plass,Jr.等.他们所用的方法为变分法或差分法.本文将作出一个精确解.它满足微分方程及复杂的边界条件,包括自由角点条件.在我们的方法中,用了叠加法及广义简支边这概念.它的特点是:沿边各点的弯矩为零,但挠度是存在的,因而要满足自由边的条件.只须消除剩余的剪力.顾及自由角点的位移,只须叠加符合要求的一些简单的弯曲面方程.所得的结果与近似解很好地核对,充分证实了现在这解是正确的.     

关于求解弹性力学平面问题的功的互等定理法

本文推广功的互等定理法于求解具有复杂边界条件矩形板的弹性力学平面问题.首先,我们给出了作为基本系统的四边固定矩形板平面问题的基本解,然后基于在具有复杂边界条件的实际系统与基本系统之间应用功的互等定理,从而求得实际系统的位移表达式.当只存在位移边界条件时,用功的互等定理法求得的位移表达式就是真实的.但是在另一些情况下,当有静力边界条件或混合边界条件时,所求得的位移是容许的.为求得真实位移.必须应用最小势能原理.一些计算表明.对于求解具有复杂边界条件的矩形板弹性力学平面问题,功的互等定理法是一简便通用的方法.显然,这是一个新方法.     

Exact solutions for free flexural vibration of Lévy-type rectangular thick plates via third-order shear deformation plate theory

In this paper, exact closed-form solutions in explicit forms are presented for transverse vibration analysis of rectangular thick plates having two opposite edges hard simply supported (i.e., Lévy-type rectangular plates) based on the Reddy’s third-order shear deformation plate theory. Two other edges may be restrained by different combinations of free, soft simply supported, hard simply supported or clamped boundary conditions. Hamilton’s principle is used to derive the equations of motion and natural boundary conditions of the plate. Several comparison studies with analytical and numerical techniques reported in literature are carried out to demonstrate accuracy of the present new formulation. Comprehensive benchmark results for natural frequencies of rectangular plates with different combinations of boundary conditions are tabulated in dimensionless form for various values of aspect ratios and thickness to length ratios. A set of three-dimensional (3-D) vibration mode shapes along with their corresponding contour plots are plotted by using exact transverse displacements of Lévy-type rectangular Reddy plates. Due to the inherent features of the present exact closed-form solution, the present findings will be a useful benchmark for evaluating the accuracy of other analytical and numerical methods, which will be developed by researchers in the future.     

角点支承矩形板的纵横弯曲

本文用复分法讨论在四角点被支承的矩形板的纵横联合弯曲问题,文中也分别讨论了薄板的横向弯曲和稳定性的问题。     

Free vibration of functionally graded rectangular plates using first-order shear deformation plate theory

The main objective of this research work is to present analytical solutions for free vibration analysis of moderately thick rectangular plates, which are composed of functionally graded materials (FGMs) and supported by either Winkler or Pasternak elastic foundations. The proposed rectangular plates have two opposite edges simply-supported, while all possible combinations of free, simply-supported and clamped boundary conditions are applied to the other two edges. In order to capture fundamental frequencies of the functionally graded (FG) rectangular plates resting on elastic foundation, the analysis procedure is based on the first-order shear deformation plate theory (FSDT) to derive and solve exactly the equations of motion. The mechanical properties of the FG plates are assumed to vary continuously through the thickness of the plate and obey a power law distribution of the volume fraction of the constituents, whereas Poisson’s ratio is set to be constant. First, a new formula for the shear correction factors, used in the Mindlin plate theory, is obtained for FG plates. Then the excellent accuracy of the present analytical solutions is confirmed by making some comparisons of the results with those available in literature. The effect of foundation stiffness parameters on the free vibration of the FG plates, constrained by different combinations of classical boundary conditions, is also presented for various values of aspect ratios, gradient indices, and thickness to length ratios.     

悬臂矩形板的弯曲稳定和振动

本文用变分法讨论悬臂矩形板的弯曲、稳定和振动的问题,文中举了很多的算例.     

First Integrals and the Residual Solution for Orthotropic Plates in Plane Strain or Axisymmetric Deformations

Two classes of exact solutions are derived for the equations of three dimensional linear orthotropic elasticity theory governing flat (plate) bodies in plane strain or axisymmetric deformations. One of these is the analogue of the Lévy solution for plane strain deformations of isotropic plates and is designated as the interior solutions. The other complementary class correspond to the Papkovich-Fadle Eigenfunction solutions for isotropic rectangular strips and is designated as the residual solutions. For sufficiently thin plates, the latter exhibits rapid exponential decay away from the plate edges. A set of first integrals of the elasticity equations is also derived. These first integrals are then transformed into a set of exact necessary conditions for the elastostatic state of the body to be a residual state. The results effectively remove the asymptoticity restriction of rapid exponential decay of the residual state inherent in the corresponding necessary conditions for isotropic plate problems. The requirement of rapid exponential decay effectively limits their applicability to thin plates. The result of the present paper extend the known results to thick plate problems and to orthotropic plate problems. They enable us to formulate the correct edge conditions for two-dimensional orthotropic thick plate theories with stress or mixed edge data.     

矩形板大挠度问题的样条函数解

本文以中心挠度为摄动参数,将矩形板大挠度问题的非线性偏微分方程缉转化为几个线性的偏微分方程组,然后分别用样条有限点法和样条有限元法求解,得到了在多种边界条件下具有任意长宽比的,受均布荷载的矩形板的解答,给出了板中面的位移、挠度的解析表达式;并编制了相关的计算机程序.计算的结果与现有的其他理论的结果作了比较,表明本文的结果是良好的.     

Application of the Haar wavelet-based discretization technique to problems of orthotropic plates and shells

The Haar wavelet discretization technique for solving the elastic bending problems of orthotropic plates and shells is proposed. Free transverse vibrations of orthotropic rectangular plates with a variable thickness in one direction are considered as a model problem. In the case of constant plate thickness, the numerical results are validated by comparing them with an exact solution. The results obtained are found to be in good agreement with those available in the literature.     

中厚板的弹性屈曲和后屈曲

本文采用Reissner假定考虑横向剪切变形的影响,导出弹性矩形板大挠度方程.本文讨论考虑横向剪切变形的矩形板的弹性屈曲和后屈曲.采用文[8]提供的摄动方法,给出了完善和非完善中厚板的后屈曲平衡路径,并与经典薄板理论结果进行了比较.     

An analytic method of studying the nonlinearly elastic equilibrium of a rectangular plate of variable thickness under bending

We propose an approximate analytic method of solving three-dimensional boundary-value problems of the physically nonlinear theory of elasticity for thick rectangular plates of variable thickness subject to a transverse load. The method is used to seek a solution of this problem in the form of double power series in small dimensionless parameters. In arbitrary approximation the original problem is reduced to a sequence of linear inhomogeneous boundary-value problems for plates of constant thickness. Bibliography: 6 titles. Translated fromTeoreticheskaya i Prikladnaya Mekhanika, No. 28, 1998, pp. 36–40     

Analytical bending solutions of clamped rectangular thin plates resting on elastic foundations by the symplectic superposition method

In this paper, the analytical bending solutions of clamped rectangular thin plates resting on elastic foundations are obtained by a rational symplectic superposition method which is based on the Hamiltonian system. The proposed method is capable of solving the plate problems with different boundary conditions via a step-by-step derivation without any trial solutions. The presented solution procedure can be extended to more boundary value problems in engineering.     

弹性矩形薄板受迫振动的功的互等定理法(Ⅰ)——四边固定的矩形板和三边固定的矩形板

本文将功的互等定理法(MRT)推广于求解在简谐干扰力作用下矩形板的稳态响应.给出了各种边界条件矩形板的一系列封闭解并提供了一些有实用价值的图表.功的互等定理法(MRT)是求解在各种简谐干扰力作用下的矩形板稳态响应的一个简便、通用的方法.本文包括三部分:(Ⅰ)四边固定的矩形板和三边固定的矩形板;(Ⅱ)二邻边固定的矩形板;(Ⅲ)悬臂矩形板.我们准备分三次陆续发表它们.     

矩形板的侧屈

本文研究矩形板的侧向屈曲问题.文中分别讨论了有集中力,均布荷载及集中力偶作用之下矩形板发生侧向屈曲时的最小临界荷载.文中使用了能量法.     

Secondary Buckling Analysis of Thin Rectangular Plates Based on the Wavelet Galerkin Method北大核心CSCD

Application of the wavelet Galerkin method (WGM) to numerical solution of nonlinear buckling problems was studied with classical elastic thin rectangular plates. First, the discretized scheme of the von Kármán equation were introduced, then a simple calculation approach to the Jacobian and Hessian matrices based on the WGM was proposed, and the wavelet discretized scheme-based eigenvalue equation method, the extended equation method and the pseudo arc-length method for nonlinear buckling analysis were discussed. Second, the secondary post-buckling equilibrium paths of elastic thin rectangular plates and the effects of aspect ratios, boundary conditions and bi-directional compression on the mode jumping behaviors, were discussed in detail. Numerical results show that, the WGM possesses good convergence for solving buckling loads on rectangular plates, and the obtained equilibrium paths are in good agreement with those from the stability experiments, the 2-step perturbation method and the nonlinear finite element method. Given the feasibility of combination with different bifurcation computation methods, the WGM makes an efficient spatial discretization method for complex nonlinear stability problems of typical plates and shells. © 2023 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.