Magnetic loading of carbon nanotube/nano-Fe3O4 composite for electrochemical sensing

An electrochemical sensing platform was developed based on the magnetic loading of carbon nanotube (CNT)/nano-Fe₃O₄ composite on electrodes. To demonstrate the concept, nano-Fe₃O₄ was deposited by the chemical coprecipitation of Fe²⁺ and Fe³⁺ in the presence of CNTs in an alkaline solution. The resulting magnetic nanocomposite brings new capabilities for electrochemical devices by combining the advantages of CNT and nano-Fe₃O₄ and provides an alternative way for loading CNT on electrodes. The fabrication and the performances of the magnetic nanocomposite modified electrodes have been described. Cyclic voltammetry (CV) and constant potential measurement indicated that the incorporated CNT exhibited higher electrocatalytic activity toward the redox processes of hydrogen peroxide. In addition, chitosan (CTS) has also been introduced into the bulk of the CNT/nano-Fe₃O₄ composite by coprecipitation to immobilize glucose oxidase (GOx) for sensing glucose. The marked electrocatalytic activity toward hydrogen peroxide permits effective low-potential amperometric biosensing of glucose, in connection with the incorporation of GOx into CNT/Fe₃O₄/CTS composite. The accelerated electron transfer is coupled with surface renewability. TEM images and XRDs offer insights into the nature of the magnetic composites. The concept of the magnetic loading of CNT nanocomposites indicates great promise for creating CNT-based biosensing devices and expands the scope of CNT-based electrochemical devices.     

Phosphate-functionalized magnetic microspheres for immobilization of Zr ions for selective enrichment of the phosphopeptides

In this work, we developed phosphate functionalized magnetic Fe₃O₄@C microspheres to immobilize Zr⁴⁺ ions for selective extraction and concentration of phosphopeptides for mass spectrometry analysis. Firstly, we synthesized Fe₃O₄@C magnetic microspheres as our previous work reported. Then, the microspheres were functionalized with phosphate groups through a simple hydrolysis reaction using 3-(trihydroxysilyl)propyl methylphosphate. And the Zr⁴⁺ ions were immobilized on phosphate-functionalized magnetic microspheres by using phosphate chelator. Finally, we successfully employed Zr⁴⁺-phosphate functionalized magnetic microspheres to selectively isolate the phosphopeptides from tryptic digests of standard protein and real samples including rat brain. All the experimental results demonstrate the enrichment efficiency and selectivity of the method we reported here.     

Synthesis and Magnetic Properties of Pt3Co/Fe3O4 Nanocomposites

Bimagnetic Pt₃Co/Fe₃O₄ nanocomposite is synthesized in aqueous solution. The nanoparticles are characterized with TEM, FTIR, and magnetic measurements. The as‐synthesized nanocomposite exhibits ferromagnetic properties at room temperature due to the exchange coupling between Pt₃Co and Fe₃O₄. Magnetic properties of Pt₃Co/Fe₃O₄ nanoparticle can be tuned by varying of the molar ratio of iron to platinum. Pt₃Co/Fe₃O₄ nanoparticles exhibit higher saturation magnetization when the molar ratio of iron to platinum is 1.     

用于高效去除水中孔雀石绿的三层结构磁性复合材料Fe3O4@聚丙烯酸@ZiF-8的制备

设计并合成了一种以磁性纳米粒子为核,聚合物为中间层,金属有机骨架材料为外层的三层结构磁性复合材料(Fe₃O₄@PAA@ZIF-8)。首先利用溶剂热法制备Fe₃O₄纳米粒子,然后通过蒸馏沉淀聚合法在Fe₃O₄纳米粒子表面包覆聚丙烯酸(PAA)层,最后通过原位沉积法在PAA外部包覆ZIF-8。在对Fe₃O₄@PAA@ZIF-8的组成和结构进行表征的基础上,深入研究其对孔雀石绿(MG)的吸附性能。透射电子显微镜(TEM)显示Fe₃O₄@PAA@ZIF-8具有明显的三层结构,Fe₃O₄的平均粒径为117nm,PAA层厚度约为17 nm,ZIF-8层的厚度约为14 nm。Fe₃O₄@PAA@ZIF-8对MG的吸附量随着p H的升高而增大,吸附过程符合准二阶动力学模型和Langmuir等温吸附模...     

用于高效去除水中孔雀石绿的三层结构磁性复合材料Fe3O4@聚丙烯酸@ZiF-8的制备

设计并合成了一种以磁性纳米粒子为核，聚合物为中间层，金属有机骨架材料为外层的三层结构磁性复合材料(Fe₃O₄@PAA@ZIF 8)。首先利用溶剂热法制备Fe₃O₄纳米粒子，然后通过蒸馏沉淀聚合法在Fe₃O₄纳米粒子表面包覆聚丙烯酸(PAA)层，最后通过原位沉积法在PAA外部包覆ZIF 8。在对Fe₃O₄@PAA@ZIF 8的组成和结构进行表征的基础上，深入研究其对孔雀石绿(MG)的吸附性能。透射电子显微镜(TEM)显示 Fe₃O₄@PAA@ZIF 8 具有明显的三层结构，Fe₃O₄的平均粒径为 117nm，PAA 层厚度约为 17 nm，ZIF 8层的厚度约为 14 nm。Fe₃O₄@PAA@ZIF 8对 MG 的吸附量随着 pH 的升高而增大，吸附过程符合准二阶动力学模型和 Langmuir等温吸附模型。此外，Fe₃O₄@PAA@ZIF 8还表现出良好的重复利用性能，8次循环利用后对MG(500 mg·L^-1)的最大吸附量仍可达982 mg·g^-1。     

免疫磁性纳米微球的制备与表征

成功制备了Fe3O4磁性纳米颗粒及二甲基丙烯酸乙二醇酯-甲基丙烯酸(EGDMA-MAA)共聚物包覆的Fe3O4磁性复合微球。将吲哚美辛抗体固定在复合微球表面,形成了Fe3O4(核)/聚合物-抗体(壳)的复合免疫磁性颗粒。XRD结果表明,制备的Fe3O4的晶型为反立方尖晶石型且纯度较高;TEM表征表明Fe3O4粒径较为均匀,平均粒径为12nm;磁性复合微球的平均直径为460nm。制备的Fe3O4磁性纳米颗粒和磁性复合微球有较强的磁响应强度,其饱和磁化率分别为49.16和8.38emu/g,能够满足磁性分离的要求。FT IR验证了磁性复合微球中羧基特征峰的存在,表明羧基成功连接在磁性微球上面。通过碳二亚胺/N-羟基琥珀酰亚胺(EDC/NHS)活化法将微球表面羧基活化并成功与抗吲哚美辛抗体交联。     

Development of Fe3O4-poly(l-lactide) magnetic microparticles in supercritical CO2

The Fe₃O₄-poly(l-lactide) (Fe₃O₄-PLLA) magnetic microparticles were successfully prepared in a process of solution-enhanced dispersion by supercritical CO₂ (SEDS), and their morphology, particle size, magnetic mass content, surface atom distribution and magnetic properties were characterized. Indomethacin (Indo) was used as a drug model to produce drug-polymer magnetic composite microparticles. The resulting Fe₃O₄-PLLA microparticles with mean size of 803 nm had good magnetic property and a saturation magnetization of 24.99 emu/g. The X-ray photoelectron spectroscopy (XPS) test indicated that most of the Fe₃O₄ were encapsulated by PLLA, which indicated that the Fe₃O₄-PLLA magnetic microparticles had a core–shell structure. After further loading with drug, the Indo-Fe₃O₄-PLLA microparticles had a bigger mean size of 901 nm, and the Fourier transform infrared spectrometer (FTIR) analysis demonstrated that the SEDS process was a typical physical coating process to produce drug-polymer magnetic composite microparticles, which is favorable for drugs since there is no change in chemistry. The in vitro cytotoxicity test showed that the Fe₃O₄-PLLA magnetic microparticles had no cytotoxicity and were biocompatible, which means there is potential for biomedical application.     

Ultrasonic-assisted synthesis of PMMA/Ni0.5Zn0.5Fe2O4 nanocomposite in mixed surfactant system

PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite with superparamagnetic behavior was synthesized by in situ emulsion polymerization of methylmethacrylate (MMA) monomer in the presence of Ni_0.5Zn_0.5Fe₂O₄ colloidal suspension assisted by ultrasonic irradiation. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). XRD and FT-IR spectra confirmed the formation of PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite. TEM images showed that Ni_0.5Zn_0.5Fe₂O₄ nanoparticles with the particle sizes of about 12 nm were well dispersed in the polymer matrix. The nanocomposite at room temperature exhibited superparamagnetic behavior under applied magnetic field. The formation mechanism of PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite was proposed as well.     

Amperometric Immunosensor Based on Gold Nanoparticles/Fe3O4-FCNTs-CS Composite Film Functionalized Interface for Carbofuran Detection

In this paper, a novel amperometric immunosensor for the determination of carbofuran based on gold nanoparticles (GNPs), magnetic Fe₃O₄ nanoparticles-functionalized multiwalled carbon nanotubes-chitosan (Fe₃O₄-FCNTs-CS), and bovine serum albumin (BSA) composite film was proposed. First, GNPs were immobilized onto the glassy carbon electrode (GCE) surface, and then the magnetic Fe₃O₄ nanoparticles mixed with chitosan-functionalized multiwall carbon nanotubes (CS-FCNTs) homogeneous composite (CS-FCNTs-Fe₃O₄) was immobilized onto the GNPs layer by electrostatic interactions between amino groups of CS and GNPs. Because chitosan (CS) contains many amino groups, it can absorb more antibodies. FCNTs have high surface area, high electrical conductivity, and it can enhance the electron transfer rate; Magnetite (Fe₃O₄) nanoparticles can provide a favorable microenvironment for biomolecules immobilization due to their good biocompatibility, strong superparamagnetic property, and low toxicity; and GNPs possess high surface-to-volume reaction, stability, and high conductivity. Gold Nanoparticles/Fe₃O₄-FCNTs-CS composite film was constructed onto the GCE surface, which had significant synergistic effects toward immunoreaction signal amplification. The stepwise assembly process was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), respectively. Under the optimal conditions, the current response was proportional to the concentration of carbofuran ranging from 1.0 ng/mL to 100.0 ng/mL and from 100.0 ng/mL to 200 µg/mL with the detection limit 0.032 ng/mL. The proposed immunosensor exhibited good accuracy, high sensitivity, and stability, and it can be used for detection of carbofuran pesticide.     

Development of core–shell structure Fe3O4@Ta2O5 microspheres for selective enrichment of phosphopeptides for mass spectrometry analysis

Protein phosphorylation is one of the most important post-translational modifications. Due to the dynamic nature and low stoichiometry of the protein phosphorylation, enrichment of phosphopeptides from proteolytic mixtures is often necessary prior to their characterization by mass spectrometry. Many metal oxides such as titanium dioxide and zirconium dioxide have been successfully applied to isolation and enrichment of phosphopeptides. Recently, niobium pentoxide was proved to have the ability for selective enrichment of phosphopeptides. Considering the proximity of tantalum to niobium, we supposed that Ta₂O₅ can be used as affinity probes for phosphopeptide enrichment. In the work, we synthesized Fe₃O₄@Ta₂O₅ magnetic microspheres with core–shell structure for selective enrichment of phosphopeptides. To demonstrate its ability for selective enrichment of phosphopeptides, we applied Fe₃O₄@Ta₂O₅ magnetic microspheres to isolation and enrichment of the phosphopeptides from tryptic digestion of standard proteins and real samples, and then the enriched peptides were analyzed by matrix-assisted laser desorption mass spectrometry analysis (MALDI-MS) or liquid chromatography coupled to electrospray ionization mass spectrometry (LC–ESI-MS). Experiment results demonstrate that Ta₂O₅ coated-magnetic microspheres show the excellent potential for selective enrichment of phosphopeptides.     

Fe3O4 MNPs-DETA/Benzyl-Br3: A new magnetically reusable catalyst for the oxidative coupling of thiols

We report a new strategy to immobilize a bromine source on the surface of magnetic Fe₃O₄ nanoparticles (Fe₃O₄ MNPs-DETA/Benzyl-Br₃) leading to a magnetically recoverable catalyst, which exhibits high catalytic efficiency in oxidative coupling of thiols to the disulfides (89–98%). The Fe₃O₄ MNPs-DETA/Benzyl-Br₃ catalyst was fabricated by anchoring 3-chloropropyltrimethoxysilane (CPTMS) on magnetic Fe₃O₄ nanoparticles, followed with N-benzylation and reaction with bromine in tetrachloridecarbon. The resulting nanocomposite was analyzed by a series of characterization techniques such as FT-IR, SEM, TGA, VSM and XRD. The catalyst could be recovered via magnetic attraction and could be recycled at least 5 times without appreciable decrease in activity.     

Facile synthesis of multifunctional attapulgite/Fe3O4/polyaniline nanocomposites for magnetic dispersive solid phase extraction of benzoylurea insecticides in environmental water samples

In this study, the superparamagnetic attapulgite/Fe₃O₄/polyaniline (ATP/Fe₃O₄/PANI) nanocomposites were successfully synthesized by a one-pot method. Fe (III) was applied as both the oxidant for the oxidative polymerization of aniline and the single iron source of Fe₃O₄ formed by the redox reaction between aniline and Fe (III). The ATP/Fe₃O₄/PANI was used as sorbent for magnetic dispersive solid phase extraction (MDSPE) of benzoylurea insecticides (BUs) in environmental water samples. The as-prepared nanocomposite sorbents were characterized by Fourier transform infrared spectra (FT-IR), X Ray diffraction (XRD), scanning electron microscopy(SEM), transmission electron microscopy (TEM), and vibrating sample magnetometry. Various experimental parameters affecting the ATP/Fe₃O₄/PANI-based MDSPE procedure, including the composition of the nanocomposite sorbents, amount of ATP/Fe₃O₄/PANI nanocomposites, vortex time, pH, and desorption conditions were investigated. Under the optimal conditions, a good linearity was observed for all target analytes, with correlation coefficients (r²) ranging from 0.9985 to 0.9997; the limits of detection (LOD) were in the range of 0.02–0.43 μg L⁻¹, and the recoveries of analytes using the proposed method ranged between 77.37% and 103.69%. The sorbents exhibited an excellent reproducibility in the range of 1.52–5.27% in extracting the five target analytes. In addition, the intra-day and inter-day precision values were found to be in the range of 0.78–6.86% and 1.66–8.41%, respectively. Finally, the proposed ATP/Fe₃O₄/PANI-based MDSPE method was successfully applied to analyze river water samples by rapid preconcentration of BUs.     

Magnetic Nitrogen-Doped Porous Carbon Nanocomposite for Pb(II) Adsorption from Aqueous Solution

We report in the present study the in situ formation of magnetic nanoparticles (Fe₃O₄ or Fe) within porous N-doped carbon (Fe₃O₄/N@C) via simple impregnation, polymerization, and calcination sequentially. The synthesized nanocomposite structural properties were investigated using different techniques showing its good construction. The formed nanocomposite showed a saturation magnetization (M_s) of 23.0 emu g⁻¹ due to the implanted magnetic nanoparticles and high surface area from the porous N-doped carbon. The nanocomposite was formed as graphite-type layers. The well-synthesized nanocomposite showed a high adsorption affinity toward Pb²⁺ toxic ions. The nanosorbent showed a maximum adsorption capacity of 250.0 mg/g toward the Pb²⁺ metallic ions at pH of 5.5, initial Pb²⁺ concentration of 180.0 mg/L, and room temperature. Due to its superparamagnetic characteristics, an external magnet was used for the fast separation of the nanocomposite. This enabled the study of the nanocomposite reusability toward Pb²⁺ ions, showing good chemical stability even after six cycles. Subsequently, Fe₃O₄/N@C nanocomposite was shown to have excellent efficiency for the removal of toxic Pb²⁺ ions from water.     

叶酸对磁性Fe_3O_4纳米粒子的表面修饰

以FeCl3·6H2O作为单一铁源,1,6-己二胺作为胺化试剂,利用无模板的溶剂热方法制备了胺基功能化的磁性Fe3O4纳米粒子,并利用其键合叶酸分子,制备出表面修饰了叶酸的磁性Fe3O4复合纳米粒子。利用傅里叶变换红外光谱仪、X-射线衍射仪、透射电镜、差热-热重分析仪和振动样品磁强计对所得纳米粒子的形貌、粒径、化学组成和磁性能进行了表征。结果表明,叶酸分子通过化学键牢固键合在磁性纳米Fe3O4粒子表面,叶酸修饰的复合纳米粒子仍然具有良好的磁性能。     

Immobilization of trypsin onto multifunctional meso-/macroporous core-shell microspheres: A new platform for rapid enzymatic digestion

A simple, fast, efficient, and reusable microwave-assisted tryptic digestion system which was constructed by immobilization of trypsin onto porous core-shell Fe₃O₄@fTiO₂ microspheres has been developed. The nanostructure with magnetic core and titania shell has multiple pore sizes (2.4 and 15.0 nm), high pore volume (0.25 cm³ g⁻¹), and large surface area (50.45 m² g⁻¹). For the proteins, the system can realize fast and efficient microwave-assisted tryptic digestion. Various standard proteins (e.g., cytochrome c (cyt-c), myoglobin (MYO), β-lactoglobulin (β-LG), and bovine serum albumin (BSA)) used can be digested in 45 s under microwave radiation, and they can be confidently identified by mass spectrometry (MS) analysis; even the concentration of substrate is as low as 5 ng μL⁻¹. Furthermore, the system for the 45 s microwave-assisted tryptic digestion is still effective after the trypsin-immobilized microspheres have been reused for 5 times. Importantly, 1715 unique proteins from 10 μg mouse brain proteins can be identified with high confidence after treatment of 45 s microwave-assisted tryptic digestion.     

Fe3O4–SiO2 nanocomposites obtained via alkoxide and colloidal route

The magnetic nanocomposite materials represent an important class of nanomaterials extensively studied nowadays due to their varied applications from medical diagnostic to storage information. The iron oxides in silica matrix systems are highly investigated. The sol-gel method is a suitable way of preparation of Fe₃O₄-SiO₂ nanocomposite materials, since this method allowed the preparation of nanocomposite materials with narrow size distribution of magnetite in silica matrix. In the present work, nanocomposite materials in the Fe₃O₄-SiO₂ system were prepared by sol-gel method via alkoxide and aqueous route. As SiO₂ sources, tetraethoxysilan (TEOS) for the alkoxide route, as well as silica sol Ludox (30%) for the aqueous route, were used. This study shows the influence of the type of silica matrix on the structure, size, and distribution of the Fe₃O₄ nanoparticles in the Fe₃O₄-SiO₂ systems. The gels were annealed at 550°C in order to consolidate the matrices. The structural characterization of the obtained materials via the two preparation routes was performed by DTA/TGA analysis, X-ray diffraction, IR and Mössbauer spectroscopy, Transmission Electron Microscopy (TEM) and Selected Area Electron Diffraction (SAED).     

The fabrication of a nanoscale polyoxometalate based magnetic adsorbent and its selective adsorption on cationic dyes

Amino group-functionalized Fe₃O₄ is loaded on a coordination complex-modified polyoxometalate nanoparticle. In this composite material, Fe₃O₄ and coordination complex-modified polyoxometalate are connected with intense hydrogen bonds as suggested by FTIR. This composite material exhibits excellent methylene blue (MB) adsorption, with adsorption capacity of 175.5 mg g^?1. It also possesses selective separation ability between cationic and anionic dye molecules. In binary solution of MB and methyl orange (MO), MB adsorption efficiency reaches 75%, but it exhibits almost no effect on the adsorption of methyl orange. The saturation magnetization value of this composite material is 18.89 emu g^?1, allowing magnetic separation, which facilitates the recycle and reuse of this composite adsorbent.     

GO/Fe3O4/有机胺复合材料的制备及对结晶紫染料的吸附性能

用改进的Hummers法制备了氧化石墨烯,用乙二胺、乙二胺与丁二胺/己二胺混溶来改性氧化石墨烯。用水热法制备了Fe3O4,并用物理混合法制备了GO/Fe3O4/有机胺的三元复合体系。用透射电镜、扫描电镜、红外光谱、热重分析、X射线衍射、VSM和XPS等对所制得的样品进行了结构表征和性能测试,研究了三元复合粒子对结晶紫染料的吸附性能及影响结晶紫染料吸附效果的因素。结果表明:所制备的Fe3O4的平均粒径约为200 nm,粒径分布均匀;复合物中GO为典型的片状结构,GO及有机胺的掺杂没有影响Fe3O4的尖晶石结构;复合物为超顺磁性,Ms为53.0 emu·g~(-1)。吸附结果表明:石墨烯/Fe3O4/有机胺的三元复合材料对结晶紫染料的最大吸附量随浓度增大而增大,而吸附结晶紫染料的移除率却随结晶紫染料浓度增大而减小,并趋向一定值;乙二胺和己二胺混溶比例为5∶1的GO/Fe3O4复合材料吸附性能最佳:结晶紫浓度为400 mg·L~(-1),最大吸附量为164.3 mg·L~(-1)。     

Preparation of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-C18 nano-magnetic composite materials and their cleanup properties for organophosphorous pesticides

Magnetic Fe₃O₄-C18 composite nanoparticles of approximately 5–10 nm in size were synthesized and characterized by IR spectroscopy, atomic absorption spectroscopy, X-ray diffraction, and transmission electron microscopy. The magnetic Fe₃O₄-C18 composite nanoparticles were applied for cleanup and enrichment of organophosphorous pesticides. Comparative studies were carried out between magnetic Fe₃O₄-C18 composite nanoparticles and common C18 materials. Residues of organophosphorous pesticides were determined by gas chromatography in combination with a nitrogen/phosphorus detector. The cleanup and enrichment properties of magnetic Fe₃O₄-C18 composite nanoparticles are comparable with those of common C18 materials for enrichment of organophosphorous pesticides, but the cleanup and enrichment are faster and easier to perform. Figure Presumed mechanism for the adhesion of the OPs to the Fe₃O₄-C18 magnetic nanoparticles     

Electrochemical synthesis of Fe3O4-PB nanoparticles with core-shell structure and its electrocatalytic reduction toward H2O2

The Fe₃O₄-Prussian blue (PB) nanoparticles with core-shell structure have been in situ prepared directly on a nano-Fe₃O₄-modified glassy carbon electrode by cyclic voltammetry (CV). First, the magnetic nano-Fe₃O₄ particles were synthesized and characterized by X-ray diffraction. Then, the properties of the Fe₃O₄-PB nanoparticles were characterized by CV, electrochemical impedance spectroscopy, and superconducting quantum interference device. The resulting core-shell Fe₃O₄-PB-modified electrode displays a dramatic electrocatalytic ability toward H₂O₂ reduction, and the catalytic current was a linear function with the concentration of H₂O₂ in the range of 1 × 10⁻⁷~5 × 10⁻⁴ mol/l. A detection limit of 2 × 10⁻⁸ (s/n = 3) was determined. Moreover, it showed good reproducibility, enhanced long-term stability, and potential applications in fields of magnetite biosensors.