Anti-microbial activity of anhydride copolymers and their derivatives prepared by ionizing radiation

Methyl methacrylate/maleic anhydride (MMA/MAn) copolymers were synthesized using gamma rays. Preparation conditions such as irradiation dose, comonomer composition and type of diluent affecting the degree of comonomer conversion were investigated. The suitable diluent for obtaining reasonable MMA/MAn copolymer yield was acetone. The higher copolymer yield was achieved when the amount of methyl methacrylate in comonomer feed solutions as well as irradiation dose increased. The effect of ZnCl₂ on the MMA/MAn copolymer yield and structure was studied. Characterization of the prepared MMA/MAn copolymers was performed using FTIR, and thermogravimetric and viscometric analysis. The derivatives of MMA/MAn copolymers were obtained by treating them with different reagents such as sulpha-drugs, hydroxylamine hydrochloride and 4-amino sodium salyciliate. The antimicrobial activity of MMA/MAn copolymers and their derivatives was examined. The activity of such copolymers against Staphylococcus aureus and Escherichia coli increased by increasing MAn content in the copolymer. The MMA/MAn copolymers treated with sulpha-drugs exhibited particularly high biological activity against different microorganisms. These results revealed that the prepared MMA/MAn copolymer and its derivatives have a broad antimicrobial activity.     

Stereochemistry of alternating methacryloyl-L-valine methyl ester–maleic anhydride copolymer

The stereochemical composition of an alternating methacryloyl-L -valine methyl estermaleic anhydride (L-MAVM/MAn) copolymer which was prepared by the photocopolymerization of L-MAVM and MAn in dioxane at 25°C without initiator was investigated by proton magnetic resonance spectroscopy. The resonance of the ester methyl protons of the L-MAVM unit appeared as three split peaks at 3.65, 3.76, and 3.82 ppm, which could be assigned to those of the coisotactic (di-threo-tri-isotactic), coheterotactic and cosyndiotactic triads, respectively. The triad cotacticity determined according to these assignments indicated that the copolymer was composed predominantly of di-threo-tri-isotactic triad. Similarly PMR spectroscopic investigation of the acryloyl-L -valine methyl ester–maleic anhydride (L-AVM/MAn) copolymer with a 1:1 molar ratio of the monomers showed that the main tactic fraction of the copolymer was also di-threo-tri-isotactic one. Nevertheless, the circular dichroic investigation of the L-AVM/MAn copolymer before and after hydrolysis denied asymmetric induction into the polymer main chain. These results suggest that the propagation step in the photocopolymerization of L-MAVM or L-AVM with MAn proceeds by the trans-trans opening of the complexmer composed of a 1:1 molar ratio of L-MAVM or L-AVM and MAn.     

马来酸酐和苯乙烯的可逆加成-断链链转移聚合及新型嵌段共聚物的合成

马来酸酐和苯乙烯是被广为研究的一对电荷转移复合物 (Ｃｈａｒｇｅｔｒａｎｓｆｅｒｃｏｍｐｌｅｘ,简称ＣＴＣ) ,而且能通过通常的自由基聚合发生交替共聚[1] .所得的聚合物由于酸酐基团的存在 ,很易进行大分子改性得到具有某些特殊功能的高分子 .不过 ,所得共聚物的分子量难以控制且分子量分布也较宽 .近年来发展起来的“活性” 可控自由基聚合越来越为人们所关注 ,因为采用这种方法不仅可对聚合物的分子量进行设计 ,同时分子量分布也较窄 ,也不需要活性离子型聚合那样严格的聚合条件 .关于烯类单体的活性自由基聚合迄今主要有氮氧自由基…     

POLYMERIC ACID FOR THIN FILM APPLICATIONS

ABSTRACT

Propyl and butyl half esters of the alternating copolymer isobutylene/maleic anhydride (IB/MAn) are polymers of high acid content (4.67 and 4.38 milliequivalent acid/g polymer). These polymers exhibit good physical performance in thin films, such as absence of cracking and minimal curl. The anhydride ring of the copolymer IB/MAn is opened in refluxing alcohol at atmospheric or elevated pressure; conversion is monitored by an IR probe (1783 vs. 1733 cm?1). The polymers are stable up to about 50 °C. Weight loss corresponding to the reversion to the anhydride structure is observed at higher temperature, with concurrent increase of anhydride resonances in the IR. Thermal stability of the half esters is similar to that of alkyl half esters of the alternating copolymers ethylene/maleic anhydride (EMA) and methyl vinyl ether/maleic anhydride (Gantrez® AN 119). The 1-propanol solution of the propyl half ester of IB/MAn copolymer is a shear thinning fluid, a significant advantage when coating at high speeds.     

Stabilizer‐free dispersion copolymerization of maleic anhydride and vinyl acetate. I. Effects of principal factors on microspheres

A novel dispersion copolymerization of maleic anhydride (MAn) and vinyl acetate (VAc) without adding stabilizer is developed, which gives uniform copolymer microspheres with tunable sizes. Some principal factors affecting the microspheres, such as reaction time, monomer concentration and feed ratio, reaction media, and cosolvent, were investigated. It was found that the stabilizer‐free dispersion copolymerization of MAn and VAc is a rapid process, and the particle size grows in accordance with the evolution of polymerization. The chemical composition of the copolymer microspheres was characterized by FT‐IR and ¹³C NMR spectroscopies. Over a wide range of monomer concentrations, the microspheres can always be formed and stably dispersed, with uniform sizes ranging from 180 nm to 740 nm. The yield of copolymer microspheres reaches a maximum at 1:1 feed ratio of MAn to VAc, owing to the alternating copolymerization between the binary monomers by a known charge‐transfer‐complex mechanism. However, the diameter of microspheres drastically increases when MAn content is enhanced. Only some specific alkyl ester solvents, such as n‐butyl acetate, isobutyl acetate, n‐amyl acetate, are desirably fit for this unique stabilizer‐free dispersion polymerization. Furthermore, we found that when some acetone is added as a cosolvent, the copolymer microspheres can still be formed, with much larger diameters. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3760–3770, 2005     

Controlled free-radical copolymerization of maleic anhydride and divinyl ether in the presence of reversible addition-fragmentation chain-transfer agents

The free-radical alternating cyclocopolymerization of maleic anhydride and divinyl ether is studied at 60–80°C in the presence of benzyl dithiobenzoate and dibenzyl trithiocarbonate as reversible addition-fragmentation chain-transfer agents. It is shown that the structure of the repeating unit of the cyclocopolymer prepared in the presence of a reversible addition-fragmentation chain-transfer agent coincides with the structure of the repeating unit of the copolymer synthesized under the conditions of conventional free-radical cyclocopolymerization. When the cyclocopolymer is used as a reversible addition-fragmentation chaintransfer agent, a successive increase in the molecular mass of the copolymer with conversion and formation of the block copolymer in the polymerization of styrene are unambiguous evidence that the copolymerization proceeds according to the pseudoliving radical mechanism.     

A Novel,Facile Method for the Preparation of Uniform,Reactive Maleic Anhydride/Vinyl Acetate Copolymer Micro‐ and Nanospheres

Summary: A novel, stabilizer‐free dispersion polymerization with alkyl esters as reaction media gives uniform alternating microspheres of maleic anhydride (MAn)/vinyl acetate (VAc) copolymer. The diameter of the copolymer microspheres could be precisely controlled from 80 to 750 nm by changing the monomer concentration or feed ratio. Moreover, this new type of copolymer microspheres with reactive anhydride groups on the surface has good solubility in common nontoxic solvents such as water and ethanol.

SEM image of the powder surface of copolymer microspheres formed at [MAn] = [VAc] = 1.5 M .     

Vinylhydroquinone. V. Tri-n-butylborane-initiated copolymerization of maleic anhydride and redox property of copolymers

Tri-n-butylborane (TBB) was found to be capable of initiating the copolymerization of vinylhydroquinone (VHQ) with maleic anhydride (MAn) and diethyl fumarate (DEF) in cyclohexanone at 30°C under nitrogen. Redox potentials of the VHQ–MAn copolymer obtained were examined. These results, along with spectroscopic data, indicate that the copolymers are of a highly alternating character.     

Donor-Acceptor Complexes in Copolymerization. LIX. Alternating Diene-Dienophile Copolymers. 13. Copolymerization of Dicyclopentadiene and Maleic Anhydride

The solution and bulk copolymerization of dicyclopentadiene (DCP) and maleic anhydride (MAH) occurs over the temperature range 80–240°C, upon the addition of a free-radical catalyst which has a short half-life at the reaction temperature. An unsaturated 1/1 MAH/DCP copolymer, derived from the copolymerization of MAH with the norbornene double bond, followed by a Wagner-Meerwein rearrangement, is obtained in the presence of a large excess of DCP at 80° C, while a saturated 2/1 MAH/ DCP copolymer, derived from the cyclocopolymerization of the residual cyclopentene unsaturation, is obtained at higher temperatures or in the presence of excess MAH. The copolymers prepared under other conditions with intermediate MAH/DCP mole ratios contain both 1/1 and 2/1 repeating units. The copolymer obtained from bulk copolymerization above 170° C contains units derived from cyclopentadiene-MAH cyclocopolymerization as well as DCP-MAH copolymerization.     

Preparation of polymer nanoparticles from renewable biobased furfuryl alcohol and maleic anhydride by stabilizer‐free dispersion polymerization

The spherical polymer nanoparticles of biobased renewable monomers, furfuryl alcohol (FA) and maleic anhydride (MAn), with diameters (D_n) in the range of 120 to 500 nm have been prepared by stabilizer‐free dispersion copolymerization. In acetate or its mixture, the conversion of the monomers greatly depended on the concentration of AIBN. When the molar ratio of AIBN/monomers was 3.6% (wt), the monomer conversion could be as high as 80%. The aggregations of the solvated polymer chains formed the nuclei of the polymer particles. After the nucleation stage, both the monomer conversions and particle sizes increased steadily, while the coefficient of variation of the particle size decreased. The almost linear relationship between the D_n³ and the weight of polymer suggested that there is no significant secondary nucleation. The copolymer of FA and MAn could not dissolve in common organic solvents. Elemental analyses, FTIR and ¹³CP‐MAS spectra showed that the copolymer was close to the alternative copolymer of FA and MAn irrespective to the molar ratios of FA/MAn in monomer feed. Furthermore, the two 2,5‐ and 3,4‐dihydrofuran ring configurations exist in the copolymer and the later is the major one. The reaction of copolymer particles with triethylenetetramine confirmed the reactivity of the succinic anhydride groups at the surface of copolymer particles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

The Copolymerization of Alkenes with Maleic Anhydride

The investigations presented deal with the experimental results of the copolymerization of maleic anhydride (MAn) with alkenes. The course of the reaction is explained by the overall rate of the copolymerization (v _Br), which correlates with the solution viscosity of the copolymer, and the dependence of the v _Br maximum on the mole ratio of the monomers at constant total monomer concentration. The use of solvents with increasing donor power leads to increased complexing of the free MAn molecules and of the MAn radical chain ends. The results demonstrate that, for low 1-alkenes, the addition of the MAn chain radical is the rate-determining step of the copolymerization. As the substituents on the olefinic double bond become larger or the double bond shifts to the 1,2-position, the addition of MAn to the hydrocarbon radical becomes more and more the rate-determining step. On the other hand, an increase of the CT complexation of the MAn polymer radical by use of donor solvents decreases the alkene addition rate.     

Photo-copolymerization of methacryloyl-L-valine methyl ester,methacryloyl-D-valine methyl ester,and maleic anhydride

Photocopolymerization of methacryloyl-L -valine methyl ester (L-MAVM), methacryloyl-D -valine methyl ester (D-MAVM) and maleic anhydride (MAn) was carried out in dioxane at 25°C without initiator at an initial total concentration of the three monomers of 1 mole/1.; the molar ratio of MAn in the feed to the sum of L- and D-MAVM was 1 : 1 in all cases. The copolymer with a 1 : 1 molar ratio of MAVM and MAn was always obtained regardless of the feed molar ratio of L- and D-MAVM. The circular dichroism (CD) spectra of the copolymer before and after hydrolysis showed a linear relationship between the monomer unit ellipticity at 222 nm and the molar feed ratio of L- and D-MAVM and suggested the induction of an asymmetric center into the polymer main chain. The results also indicated that the configuration of the induced asymmetric carbon atoms would be arranged according to that of fed MAVM monomer.     

烷基硫醇诱发苯乙烯马来酸酐共聚合的研究

<正> 硫醇由其上S—H弱键易遭受自由基进攻而用作调聚剂是熟知的。硫醇作为氧化-还原体系的一个组成促进丁苯乳液聚合也有报道,但单独硫醇,在相当于引发剂的用量范围内及常温条件下,诱发烯类单体或CTC(电荷转移络合物)型单体对的共聚报道极少。我们发现了微量硫醇在常温下对苯乙烯(St)、马来酸酐(MAn)共聚的催化效应,并     

Photocopolymerization of methacryloyl-L-valine methyl ester with maleic anhydride

Methacryloyl-L -valine methyl ester (MAVM) and maleic anhydride (MAn) were photopolymerized without initiator in dioxane at 35°C. Copolymer having a 1:1 molar ratio of the monomers was obtained regardless of both molar ratio of monomers in the feed and polymerization time. The circular dichroism (CD) spectrum of the copolymer before and after hydrolysis showed the induction of asymmetric centers into the polymer main chain. Spectroscopic and kinetic studies suggested the alternating and stereoregular copolymerization of MAVM and MAn, in which a charge transfer complex with a 1:1 molar ratio of monomers participated.     

A polarity‐activation strategy for the high incorporation of 1‐alkenes into functional copolymers via RAFT copolymerization

A new synthetic methodology for the preparation of copolymers having high incorporation of 1‐alkene together with multifunctionalities has been developed by polarity‐activated reversible addition‐fragmentation chain transfer (RAFT) copolymerization. This approach provides well‐defined alternating poly(1‐decene‐alt‐maleic anhydride), expanding the monomer types for living copolymerizations. Although neither 1‐decene (DE) nor maleic anhydride (MAn) has significant reactivity in RAFT homopolymerization, their copolymers have been synthesized by RAFT copolymerizations. The controlled characteristics of DE‐MAn copolymerizations were verified by increased copolymer molecular weights during the copolymerization process. Ternary copolymers of DE and MAn, with high conversion of DE, could be obtained by using additive amounts (5 mol %) of vinyl acetate or styrene (ST), demonstrating further enhanced monomer reactivities and complex chain structures. When ST was selected as the third monomer, copolymers with block structures were obtained, because of fast consumption of ST in the copolymerization. Moreover, a wide variety of well‐defined multifunctional copolymers were prepared by RAFT copolymerizations of various functional 1‐alkenes with MAn. For each copolymerization, gel permeation chromatography analysis showed that the resulting copolymer had well‐controlled M_n values and fairly low polydispersities (PDI = 1.3–1.4), and ¹H and ¹³C NMR spectroscopies indicated strong alternating tendency during copolymerization with high incorporation of 1‐alkene units, up to 50 mol %. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3488–3498, 2008     

Synthesis of graft copolymer derivatives of brominated poly(isobutylene-co-isoprene)

Strategies for preparing graft copolymers from brominated poly(isobutylene-co-isoprene) (BIIR) are demonstrated. Selective dehydrohalogenation of the allylic bromide functionality within BIIR to give an exo-conjugated diene is described, along with subsequent cycloadditions of maleic anhydride (MAn) and its mono-ester and di-ester derivatives. Alcoholysis of the bicyclic anhydride product of BIIR dehydrobromination/MAn cycloaddition is used to produce an IIR-g-PE copolymer in low yield. An alternate approach involving bromide displacement from BIIR by the salts of maleate half-esters is shown to be an efficient means of generating isobutylene-rich copolymers containing polyethylene, polyethylene oxide and polycaprolactone grafts.     

Vinyl monomers bearing chromophore moieties and their polymers. VIII. synthesis and fluorescence behavior of a vinyloxy monomer having an electron‐accepting chromophore moiety,p‐((vinyloxy)methyl)benzonitrile,and its polymers

A vinyloxy monomer having an electron‐accepting chromophore moiety, p‐((vinyloxy)methyl)benzonitrile (VOMBN), was synthesized by reaction of p‐(hydroxymethyl)benzonitrile with ethyl vinyl ether (EVE) in the presence of mercuric acetate. VOMBN can easily be cationically homopolymerized and copolymerized with EVE by using Lewis acids such as boron trifluoride etherate (BF₃ · OEt₂) as a catalyst and radically copolymerized with maleic anhydride (MAn) using AIBN as an initiator. The fluorescence behaviors of VOMBN, its copolymer P(VOMBN‐co‐MAn), and its saturated model compound p‐(ethoxymethyl)benzonitrile (EOMBN) were investigated in acetonitrile. It has been found that the fluorescence intensity of VOMBN is much lower than its copolymer and EOMBN at the same chromophore concentration. A fluorescence “structural self‐quenching effect” (SSQE) is also observed for VOMBN as we have reported previously [Li, F. M.; Chen, S. J.; Li, Z. C.; Qiu, J. J Polym Sci Polym Chem 1996, 34, 1881]. This phenomenon has been attributed to the inter‐ and intramolecular charge transfer interaction between the electron‐accepting cyanophenyl chromophore and the electron‐donating vinyloxy group in the same molecule. The dependence of the fluorescence intensity of VOMBN on solvents of different viscosities is evidence that the SSQE of VOMBN mainly occurs intramolecularly. The fluorescence of EOMBN and P(VOMBN‐co‐MAn) was quenched by a series of electron‐rich vinyloxy compounds which do not have chromophore moieties, such as dihydrofuran (2H‐furan), dihydropyran (2H‐pyran), furan, and EVE. It is observed that the higher the electron‐donating ability of the quenchers, the greater the quenching efficiency. P(VOMBN) and the random copolymers of VOMBN with EVE show broader fluorescence spectra as compared to the alternating copolymer P(VOMBN‐co‐MAn). This indicates that there is a mutual interaction between the adjacent cyanophenyl groups in P(VOMBN) and P(VOMBN‐co‐EVE), whereas such an interaction does not exist for P(VOMBN‐co‐MAn) in which the cyanophenyl groups are isolated by the rigid succinic anhydride rings. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 179–187, 1999     

Peroxide initiated maleic anhydride grafting: Structural studies on an ester‐containing copolymer and related substrates

Maleic anhydride (MAn) was grafted onto the low molecular weight esters methyl decanoate (MD) and methyl 2‐ethylhexanoate (MEH) using the free‐radical initiators Lupersol‐101 and ‐130; the esters were used as model compounds for the copolymer poly(ethylene‐co‐methyl acrylate). The grafted products in both cases were isolated from the unreacted ester and were subjected to extensive analysis using spectroscopic and chromatographic techniques. Analysis of the grafted material indicated the presence of one or more succinic anhydride (SAn) residues grafted to the ester. In the case of the multiply grafted material it has been established conclusively by ¹³C‐NMR using 2,3‐¹³C₂ labeled MAn that the multiple grafts exist as single units. A limited number of grafting experiments was performed on the copolymer in the melt and the graft‐modified copolymer was characterized spectroscopically. Single graft units were observed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1609–1618, 1999     

Radical copolymerization of optically active l-menthyl vinyl ether with maleic anhydride,dimethyl maleate,and dimethyl fumarate

The copolymerizations of l-menthyl vinyl ether (l-MVE) with the monomers, that is, maleic anhydride (MAn), dimethyl maleate (DMM), and dimethyl fumarate (DMFu), were undertaken to obtain optically active copolymers. The optically active l-menthyl group in the side chain of copolymers was removed by the ether cleavage reaction with dry-hydrogen bromide gas. The ethercloven copolymers were still optically active. Hence it was concluded that asymmetric carbon atoms were introduced into the copolymer main chain, the reason given being that l-MVE and comonomers (MAn, DMM, and DMFu) made the stereoselective charge-transfer complex one another and copolymerized stereospecifically. From the results of the measurements of optical rotatory dispersion (ORD) and circular dichroism (CD) for copolymers before and after the ether cleavage reaction, the mode of bond opening for α,β-substituted monomers (MAn, DMM, and DMFu) was discussed and the microstructures of copolymers were prepared.     

Influence of hydrophobe content and salt concentration on dilute solution behaviour of hydrophobically modified ionic polymers from diallylammonium salts/sulfur dioxide cyclocopolymerization: Light scattering and fluorescence spectroscopy

Novel hydrophobically modified polyelectrolytes were synthesized using the cyclocopolymerization of sulfur dioxide, N,N-diallyl-N-carboethoxymethylammonium chloride and the hydrophobic monomer N,N-diallyl-N-octadecylammonium chloride. Aggregation of these polymers in aqueous solutions was characterized in the dilute regime by static light scattering and fluorescence spectroscopy as a function of hydrophobe content and NaCl concentration. Copolymers were observed to associate at very low concentrations (0.005 wt%). The copolymer is capable of associating at this very low polymer concentration because of the extended length of the hydrophobic monomer (C₁₈) that can reach far enough from the backbone to avoid electrostatic repulsion. Aggregation of the polymers increased with increasing hydrophobe content. Upon addition of salt, the apparent molecular weight of polymer aggregates decreased as a result of neutralization of the charges. At high salt concentrations, the size of the polymer aggregates was observed to increase again as a result of increased polarity of the solvent that resulted in more hydrophobic association.