Interaction of an organic cation with Gibbs monolayers of n-hexadecyl phosphate

Surface phase behavior of n-hexadecyl phosphate (n-HDP) and its mixture with L-arginine (L-arg), which behaves as L-argininium cation (L-arg(+)) in aqueous solution, at a molar ratio 2:3 in Gibbs adsorption layers has been studied by film balance, Brewster angle microscopy (BAM) and surface tensiometry at 20 degrees C. The monolayers of n-HDP show three phases that are gas (G), intermediate (I) and liquid condensed (LC), and two phase transitions. A first-order G-I phase transition that is followed by a second-order I-LC phase transition is found in these monolayers. Although the monolayers of the mixtures containing n-HDP and L-arg show three phases, the nature of the middle phase is different from that of the n-HDP monolayers. The three phases observed for the mixed systems are G, liquid expanded (LE) and LC phases. A first-order G-LE phase transition is found at a low surface pressure at > or =10 degrees C. This transition is followed by another first-order LE-LC phase transition at a certain higher surface pressure. The first-order nature of the phase transitions for both the systems is confirmed by the presence of plateaus in the pi-t curves, which are accompanied by two surface phases. A second-order phase transition in the monolayers of n-HDP is indicated by a gradual change in the surface morphology, from a uniformly bright isotropic to an anisotropic mosaic textured phase, which is accompanied by a continuous change in the surface pressure. The domains formed during the first-order phase transition in the adsorption layers of n-HDP are circular and remain unaffected by changing the temperature. Although the domains of an LE phase are circular, those of an LC phase at the latter transition are fractal in the mixed system. A further branching of the arms of the fractal domains is found to occur by an increase in the temperature. All the results are explained by considering salt formation between anion from n-HDP and L-arg(+).     

Temperature and compression rate independent domain shape in Langmuir monolayers of di-n-dodecyl hydrogen phosphate at the air-water interface

Thermodynamic and morphological properties of Langmuir monolayers of di-n-dodecyl hydrogen phosphate (DDP) have been studied by film balance and Brewster angle microscopy (BAM) over a wide range of temperature between 5 and 40 degrees C. From pi-A isotherms, a generalized phase diagram consisting of gas (G), liquid expanded (LE) and liquid condensed (LC) phases is constructed for the DDP monolayers. The BAM images show the formation of gas bubble in the bright background of LE phase during G-LE phase transitions and fingering LC domains during LE-LC phase transitions. The shapes of these domains are independent of temperature, showing a sharp contrast to the temperature-dependent monolayer morphologies of amphiphilic systems where the shape of the LC domains changes either from compact circular to fingering or from irregular or spiral to compact patterns with increasing temperature. In addition, the domains do not show any change in their shapes with decreasing the compression rate. Since the two-alkyl chains are directly attached by covalent bonds to the phosphate group, the rearrangement of the molecules needs to move the whole molecules including the hydration sphere. The difficulty related to such a movement of the molecules causes the fingering domains, which are independent of external variables. Although the domains are formed in a fingering shape, the equilibrium shape can be attained by about 120 min at 15 degrees C indicating a rather slow relaxation rate.     

Nanoscale properties of mixed fengycin/ceramide monolayers explored using atomic force microscopy

To gain insight into the interactions between fengycin and skin membrane lipids, mixed fengycin/ceramide monolayers were investigated using atomic force microscopy (AFM) (monolayers supported on mica) and surface pressure-area isotherms (monolayers at the air-water interface). AFM topographic images revealed phase separation in mixed monolayers prepared at 20 degrees C/pH 2 and composed of 0.25 and 0.5 fengycin molar ratios, in the form of two-dimensional (2-D) hexagonal crystalline domains of ceramide surrounded by a fengycin-enriched fluid phase. Surface pressure-area isotherms as well as friction and adhesion AFM images confirmed that the two phases had different molecular orientations: while ceramide formed a highly ordered phase with crystalline chain packing, fengycin exhibited a disordered fluid phase with the peptide ring lying horizontally on the substrate. Increasing the temperature and pH to values corresponding to the skin parameters, i.e., 37 degrees C/pH 5, was found to dramatically affect the film organization. At low fengycin molar ratio (0.25), the hexagonal ceramide domains transformed into round domains, while at higher ratio (0.5) these were shown to melt into a continuous fengycin/ceramide fluid phase. These observations were directly supported by the thermodynamic analysis (deviation from the additivity rule, excess of free energy) of the monolayer properties at the air-water interface. Accordingly, this study demonstrates that both the environmental conditions (temperature, pH) and fengycin concentration influence the molecular organization of mixed fengycin/ceramide monolayers. We believe that the ability to modulate the formation of 2-D domains in the skin membrane may be an important biological function of fengycin, which should be increasingly investigated in future pharmacological research.     

Anomalous phase behavior in Langmuir monolayers of monomyristoyl-rac-glycerol at the air-water interface

The effect of temperature on the surface phase behavior in Langmuir monolayers of monomyristoyl-rac-glycerol (MMG) at the air-water interface has been studied by film balance and Brewster angle microscopy (BAM). It is observed that the domains of the MMG monolayers formed in the coexistence region between the liquid expanded (LE) and liquid condensed (LC) phases retain their circular shape over the studied temperature range, showing a sharp contrast to the temperature-dependent monolayer morphologies of amphiphilic systems where the shape of condensed domains changes either from compact circular to fingering or from irregular or spiral to compact patterns with increasing temperature. It is concluded that the system is capable of tuning the line tension of the interface by the effect of the increase in the hydrophobic character because of dehydration of the headgroup, which imparts to the molecules the properties of similar molecules but with less hydrophilic headgroups. As a result, the domains can retain their circular shape even up to the maximum possible temperature of the phase transition.     

Lipid binding interactions of antimicrobial plant seed defence proteins: puroindoline-a and β-purothionin

The indolines and thionins are basic, amphiphilic and cysteine-rich proteins found in cereals; puroindoline-a (Pin-a) and β-purothionin (β-Pth) are members of these families in wheat (Triticum aestivum). Pin-a and β-Pth have been suggested to play a significant role in seed defence against microbial pathogens, making the interaction of these proteins with model bacterial membranes an area of potential interest. We have examined the binding of these proteins to lipid monolayers composed of 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DPPG) using a combination of neutron reflectometry, Brewster angle microscopy, and infrared spectroscopy. Results showed that both Pin-a and β-Pth interact strongly with condensed phase DPPG monolayers, but the degree of penetration was different. β-Pth was shown to penetrate the lipid acyl chain region of the monolayer and remove lipids from the air/liquid interface during the adsorption process, suggesting this protein may be able to both form membrane spanning ion channels and remove membrane phospholipids in its lytic activity. Conversely, Pin-a was shown to interact mainly with the head-group region of the condensed phase DPPG monolayer and form a 33 ? thick layer below the lipid film. The differences between the interfacial structures formed by these two proteins may be related to the differing composition of the Pin-a and β-Pth hydrophobic regions.     

Thermodynamic and infrared analyses of the interaction of chlorpromazine with phospholipid monolayers

An investigation has been made of the interaction between chlorpromazine (CPZ) and monolayers of 1,2-dipalmitoyl-sn-3-glycerophosphatidylcholine (DPPC) and 1,2-dipalmitoyl-sn-3-glycero[phospho-rac-(1-glycerol)] (DPPG), both at the air/water interface and in transferred Langmuir-Blodgett films. The Gibbs free energy, DeltaG, and the compressibility modulus (C(S)(-1)), obtained from the surface pressure isotherms, indicated changes in the in-plane interactions of CPZ/DPPG mixed monolayers, with positive values of DeltaG. The arrangement of CPZ in the zwitterionic DPPC monolayers causes a weaker interaction in CPZ/DPPC mixed monolayers, with the DeltaG fluctuating around zero. IR measurements in transferred monolayers showed that CPZ did not affect the conformational order of the acyl chains, its effects being limited to the bands corresponding to the headgroups. Furthermore, since no shift was observed for the acyl chain bands, the phase transition induced by CPZ is not a liquid expanded (LE) to liquid condensed (LC) transition, as the latter is associated with chain ordering. Taken together, the IR and compressibility results demonstrate that the effect from CPZ cannot be correlated with temperature changes in the subphase for pure monolayers, in contrast to models proposed by other authors.     

Penetration of bovine serum albumin into dipalmitoylphosphatidylglycerol monolayers: direct observation by atomic force microscopy

The penetration of bovine serum albumin (BSA) into dipalmitoylphosphatidylglycerol (DPPG) monolayers was observed using atomic force microscopy (AFM) and surface pressure measurements. The effects of surface pressure, amount of BSA and the addition of ganglioside GM1 (GM1) were investigated. The surface pressure of the DPPG monolayer was increased by the penetration of BSA, and the increase in surface pressure was greater in the liquid-expanded film than that in the liquid-condensed film. The AFM images indicated that BSA penetrated into the DPPG monolayer. The amount of BSA that penetrated into the DPPG monolayer increased with time and with the amount of BSA added. On the contrary, the AFM image showed that BSA penetration into the mixed DPPG/GM1 (9 : 1) monolayer scarcely occurred. GM1 inhibited the penetration of BSA into the DPPG monolayer.     

Effect of temperature on the surface phase behavior and micelle formation of a mixed system of nonionic/anionic surfactants

The adsorption and micellar behavior of diethylene glycol mono-n-tetradecyl ether (C14E2), sodium 3,6,9,12-tetraoxaoctacosanoate (TOOCNa), and their mixture at a 1:1 molar ratio have been studied by film balance, Brewster angle microscopy (BAM), and surface tensiometry at different temperatures. The monolayers of pure C14E2 and its mixture with TOOCNa show a first-order phase transition with a conspicuous cusp point in their respective adsorption isotherms. This is further confirmed by the observation of bright two-dimensional condensed phase domains visualized by BAM just after the appearance of the phase transition. It is interesting to note here that for C14E2, condensed domains are observed up to 19 degrees C, while in the mixed system, they are observed up to 22 degrees C. To understand why in the mixed system the domains are observed at higher temperatures than for pure C14E2, we have measured the temperature dependency of the equilibrium surface tension at > or = cmc (gammacmc) values of both the pure and the mixed systems. The gammacmc values of pure C14E2 remain almost constant, while those of pure TOOCNa and its mixture with C14E2 decrease appreciably with increasing temperature. It is concluded that higher degree of dehydration of the ethylene oxide (EO) chain reduces the head-group size of TOOCNa, which outweighs the combined effect of the repulsive interactions between the head-groups and the thermal motion of the adsorbed molecules. Furthermore, C14E2 being inserted into the TOOCNa monolayer reduces the electrostatic repulsions between the charged heads, and consequently, the adsorbed monolayers attain closer molecular packing. As a result, the gammacmc values of both pure TOOCNa and its mixture with C14E2 decrease with increasing temperature. This facilitates the formation of condensed domains in the mixed system at higher temperatures, whereas none of the individual members can show any indicative feature of phase transition under the same experimental conditions.     

Brewster angle microscopy of calcium oxalate monohydrate precipitation at phospholipid monolayer phase boundaries

The precipitation of calcium oxalate monohydrate (COM) at phospholipid monolayers confined to the air/water interface is observed in situ with the aid of Brewster angle microscopy. COM crystals appear as bright objects that are easily identified and quantified to assess the effects of different conditions on crystallization. Crystal precipitation was monitored at monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) in liquid condensed (LC) and liquid expanded (LE) phases. Within the LC phase, higher pressures reduce the incidence of crystallization at the interface, implying that within this phase precipitation is enhanced by higher compressibility or fluidity of the monolayer. Precipitation at biphasic LC/LE and LE/gas (G) monolayers was also studied. COM appears preferentially at phase boundaries of the DPPC LC/LE and LE/G monolayers. However, when an LC/LE phase boundary is created by two different phospholipids that are phase segregated, such as DPPC and 1,2-dimyristoyl-sn-glycero-3-phosphocholine, crystal formation occurs away from the interface within the DPPC LC phase. It is suggested that COM growth at phase boundaries is preferred only when there is molecular exchange between the phases.     

Fluorescence microscopy observation of self-organized microstructure formed by a rare earth compound

The morphologies of monolayers containing Eu(TTA)3Phen (TTA=thenoyltrifluoroace-tone, Phen = 1, 10-phenanthroline) were studied at the air/liquid interface on different subphases by fluorescence microscopy (FM). The composite subphase was the basic premise for the stable existence of the rare earth compound at air/liquid interface. The process that rare earth compound phase changes from liquid expanded state to liquid condensed state corresponded to a plateau in the π-A isotherm. In the pure Eu(TTA)3Phen monolayer, rod domains of Eu(TTA)3Phen formed and packed with no order. In the mixed monolayers with stearic acid (SA), phase transition of SA occurred first and formed domains with an electric gradient field, which induced the rare earth compound to form luminescent ring domains. Influence of intermolecular interaction on the self-organized microstructure was revealed.     

Self-organization of a wedge-shaped surfactant in monolayers and multilayers

The self-organization behavior of a wedge-shaped surfactant, disodium-3,4,5-tris(dodecyloxy)phenylmethylphosphonate, was studied in Langmuir monolayers (at the air-water interface), Langmuir-Blodgett (LB) monolayers and multilayers, and films adsorbed spontaneously from isooctane solution onto a mica substrate (self-assembled films). This compound forms an inverted hexagonal lyotropic liquid crystal phase in the bulk and in thick adsorbed films. Surface pressure isotherm and Brewster angle microscope (BAM) studies of Langmuir monolayers revealed three phases: gas (G), liquid expanded (LE), and liquid condensed (LC). The surface pressure-temperature phase diagram was determined in detail; a triple point was found at approximately 10 degrees C. Atomic force microscope (AFM) images of LB monolayers transferred from various regions of the phase diagram were consistent with the BAM images and indicated that the LE regions are approximately 0.5 nm thinner than the LC regions. AFM images were also obtained of self-assembled films after various adsorption times. For short adsorption times, when monolayer self-assembly was incomplete, the film topography indicated the coexistence of two distinct monolayer phases. The height difference between these two phases was again 0.5 nm, suggesting a correspondence with the LE/LC coexistence observed in the Langmuir monolayers. For longer immersion times, adsorbed multilayers assembled into highly organized periodic arrays of inverse cylindrical micelles. Similar periodic structures, with the same repeat distance of 4.5 nm, were also observed in three-layer LB films. However, the regions of organized periodic structure were much smaller and more poorly correlated in the LB multilayers than in the films adsorbed from solution. Collectively, these observations indicate a high degree of similarity between the molecular organization in Langmuir layers/LB films and adsorbed self-assembled films. In both cases, monolayers progress through an LE phase, into LE/LC coexistence, and finally into LC phase as surface density increases. Following the deposition of an additional bilayer, the film reorganizes to form an array of inverted cylindrical micelles.     

A monolayer study on interactions of docetaxel with model lipid membranes

Docetaxel (DCT) is an antineoplastic drug for the treatment of a wide spectrum of cancers. DCT surface properties as well as miscibility studies with l-alpha-dipalmitoyl phosphatidylcholine (DPPC), which constitutes the main component of biological membranes, are comprehensively described in this contribution. Penetration studies have revealed that when DCT is injected under DPPC monolayers compressed to different surface pressures, it penetrates into the lipid monolayer promoting an increase in the surface pressure. DCT is a surface active molecule able to decrease the surface tension of water and to form insoluble films when spread on aqueous subphases. The maximum surface pressure reached after compression of a DCT Langmuir film was 13 mN/m. Miscibility of DPPC and DCT in Langmuir films has been studied by means of thermodynamic properties as well as by Brewster angle microscopy (BAM) analysis of the mixed films at the air-water interface, concluding that DPPC and DCT are miscible and they form non-ideally mixed monolayers at the air-water interface. Helmholtz energies of mixing revealed that no phase separation occurs. In addition, Helmholtz energies of mixing become more negative with decreasing areas per molecule, which suggests that the stability of the mixed monolayers increases as the monolayers become more condensed. Compressibility values together with BAM images indicate that DCT has a fluidizing effect on DPPC monolayers.     

Monolayer characteristics of a long-chain N,O-diacyl substituted ethanolamine at the air/water interface

The N- and/or O-acylation of amphiphilic ethanolamine attracts particular attention because of its interesting biological, pharmaceutical, and medicinal properties. Tetradecanoic acid-2-[(1-oxotetradecyl)amino]ethyl ester (TAOAE) as the selected N,O-diacyl derivative of ethanolamine has been synthesized in order to obtain first information about its main interfacial characteristics, such as the surface pressure-area (π-A) isotherms, the morphology of the condensed phase domains, the lattice structure of the condensed phase, and information about the existence of interfacial hydrogen bonds (-NH···O═C-). The π-A isotherms of TAOAE, similar to those of the most usual monolayers of amphiphiles, show a sharp break point (A(c)) indicating the first-order phase transition from the fluid (liquid-expanded (LE), gaseous (G)) to the condensed (liquid-condensed (LC)) phase. On the mesoscopic scale, the dendritic domains homogeneously reflecting suggest an orientation of the alkyl chains perpendicular to the aqueous surface. The grazing incidence X-ray diffraction (GIXD) studies reveal hexagonal packing of the TAOAE molecules oriented perpendicular to the surface in an LS phase. The existence of a hydrogen-bonding network in the monolayer is supported by infrared reflection absorption spectroscopy (IRRAS) experiments.     

Influence of hydrophobic alkylated gold nanoparticles on the phase behavior of monolayers of DPPC and clinical lung surfactant

The effect of hydrophobic alkylated gold nanoparticles (Au NPs) on the phase behavior and structure of Langmuir monolayers of dipalmitoylphosphatidylcholine (DPPC) and Survanta, a naturally derived commercial pulmonary surfactant that contains DPPC as the main lipid component and hydrophobic surfactant proteins SP-B and SP-C, has been investigated in connection with the potential implication of inorganic NPs in pulmonary surfactant dysfunction. Hexadecanethiolate-capped Au NPs (C(16)SAu NPs) with an average core diameter of 2 nm have been incorporated into DPPC monolayers in concentrations ranging from 0.1 to 0.5 mol %. Concentrations of up to 0.2 mol % in DPPC and 16 wt % in Survanta do not affect the monolayer phase behavior at 20 °C, as evidenced by surface pressure-area (π-A) and ellipsometric isotherms. The monolayer structure at the air/water interface was imaged as a function of the surface pressure by Brewster angle microscopy (BAM). In the liquid-expanded/liquid-condensed phase coexistence region of DPPC, the presence of 0.2 mol % C(16)SAu NPs causes the formation of many small, circular, condensed lipid domains, in contrast to the characteristic larger multilobes formed by pure lipid. Condensed domains of similar size and shape to those of DPPC with 0.2 mol % C(16)SAu NPs are formed by compressing Survanta, and these are not affected by the C(16)SAu NPs. Atomic force microscopy images of Langmuir-Schaefer-deposited films support the BAM observations and reveal, moreover, that at high surface pressures (i.e., 35 and 45 mN m(-1)) the C(16)SAu NPs form honeycomb-like aggregates around the polygonal condensed DPPC domains. In the Survanta monolayers, the C(16)SAu NPs were found to accumulate together with the proteins in the liquid-expanded phase around the circular condensed lipid domains. In conclusion, the presence of hydrophobic C(16)SAu NPs in amounts that do not influence the π-A isotherm alters the nucleation, growth, and morphology of the condensed domains in monolayers of DPPC but not of those of Survanta. Systematic investigations of the effect of the interaction of chemically defined NPs with the lipid and protein components of lung surfactant on the physicochemical properties of surfactant films are pertinent to understanding how inhaled NPs impact pulmonary function.     

Surface phase behavior in Gibbs monolayers of bis(ethylene glycol) mono-n-tetradecyl ether at the air-water interface

We present the adsorption kinetics and surface morphology of the adsorbed monolayers of bis(ethylene glycol) mono-n-tetradecyl ether (C14E2) by film balance and Brewster angle microscopy. A cusp point followed by a plateau region in the pressure (pi)-time (t) adsorption isotherm indicates a first-order phase transition in the coexistence region between a lower density liquid expanded (LE) phase and a higher density liquid condensed (LC) phase. A variety of condensed phase domains surrounded by the homogeneous LE phase are observed just after the appearance of the phase transition. The domains are of a spiral or striplike structure at lower temperatures. This characteristic shape of the domains is because of strong dipole-dipole repulsion between the molecules. At 18 degrees C, the domains are found to be quadrant structures. A slight increase in subphase temperature (around 1 degrees C) brings about a quadrant-to-circular shape transition in the domains. The circular domains return to quadrant structures as the subphase temperature is lowered. The domains completely disappear when the temperature is increased beyond 19 degrees C, suggesting that the critical temperature for the condensed domain formation is 19 degrees C. Above this temperature, the hypothetical surface pressure necessary for the phase transition exceeds the actual surface pressure attainable from a solution of concentration greater than or equal to the critical micelle concentration. An increase in molecular motion with increasing temperature results in a higher degree of chain flexibility. As a result, the molecules cannot accumulate in the condensed phase form when the subphase temperature is above 19 degrees C.     

Photoinduced phase separation and miscibility in the condensed phase of a mixed Langmuir monolayer

We report our studies on the mixed Langmuir monolayer of mesogenic molecules, p-(ethoxy)-p-phenylazo phenyl hexanoate (EPPH) and octyl cyano biphenyl (8CB), employing the techniques of surface manometry and Brewster angle microscopy. Our studies show that the mixed monolayer exhibits higher collapse pressures for certain mole fractions of EPPH in 8CB as compared to individual monolayers. Also, a considerable reduction in the area per molecule is seen in the mixed monolayer, indicating a condensed phase. We have also studied the photostability of the mixed monolayer at different initial surface pressures. The mixed monolayer, under alternate cycles of UV and visible illumination, exhibits changes in surface pressures. This is due to the photoinduced transformation of EPPH isomers in the mixed monolayer. Our in-situ Brewster angle microscope studies for 0.5 mole fraction of EPPH in 8CB show a phase separation in the UV and a miscible phase in the visible, at low surface pressures ( approximately 5 mN/m). At higher surface pressures ( approximately 10 mN/m), under UV illumination, we find a phase separation which does not revert to a miscible phase under visible illumination.     

Fatty-acid monolayers at the nematic/water interface: phases and liquid-crystal alignment

The two-dimensional (2D) phases of fatty-acid monolayers (hexadecanoic, octadecanoic, eicosanoic, and docosanoic acids) have been studied at the interface of a nematic liquid crystal (LC) and water. When observed between crossed polarizers, the LC responds to monolayer structure owing to mesoscopic alignment of the LC by the adsorbed molecules. Similar to Langmuir monolayers at the air/water interface, the adsorbed monolayer at the nematic/water interface displays distinct thermodynamic phases. Observed are a 2D gas, isotropic liquid, and two condensed mesophases, each with a characteristic anchoring of the LC zenithal tilt and azimuth. By varying the monolayer temperature and surface concentration we observe reversible first-order phase transitions from vapor to liquid and from liquid to condensed. A temperature-dependent transition between two condensed phases appears to be a reversible swiveling transition in the tilt azimuth of the monolayer. Similar to monolayers at the air/water interface, the temperature of the gas/liquid/condensed triple-point temperature increased by about 10 degrees C for a two methylene group increase in chain length. However, the absolute value of the triple-point temperatures are depressed by about 40 degrees C compared to those of analogous monolayers at the air/water interface. We also observe a direct influence by the LC layer on the mesoscopic and macroscopic structure of the monolayer by analyzing the shapes and internal textures of gas domains in coexistence with a 2D liquid. An effective anisotropic line tension arises from elastic forces owing to deformation of the nematic director across phase boundaries. This results in the deformation of the domain from circular to elongated, with a distinct singularity. The LC elastic energy also gives rise to transition zones displaying mesoscopic realignment of the director tilt or azimuth between adjacent regions with a sudden change in anchoring.     

Monolayer investigations on the bacterial amphiphile lipoteichoic acid and on lipoteichoic acid/dipalmitoyl-phosphatidylglycerol mixtures

Lipoteichoic acid (LTA) and mixtures of LTA with dipalmitoyldiphosphatidylglycerol (DPPG) were investigated with Langmuir-Blodgett techniques. In spite of its large hydrophilic portion LTA formed a monolayer when spread from a chloro-form/n-propanol/water system. In DPPG/LTA-mixed monolayers LTA influenced strongly the compression isotherms, indicating a stabilizing effect of LTA on DPPG monolayers. At higher concentrations of LTA phase separation was observed.     

Miscibility behavior and nanostructure of monolayers of the main phospholipids of Escherichia coli inner membrane

We report a thermodynamic study of the effect of calcium on the mixing properties at the air-water interface of two phospholipids that mimic the inner membrane of Escherichia coli: 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol. In this study, pure POPE and POPG monolayers and three mixed monolayers, χ(POPE) = 0.25, 0.5, and 0.75, were analyzed. We show that for χ(POPE) = 0.75, the values of the Gibbs energy of mixing were negative, which implies attractive interactions. We used atomic force microscopy to study the structural properties of Langmuir-Blodgett monolayers that were transferred onto mica substrate at lateral surface pressures of 25 and 30 mN m(-1). The topographic images of pure POPE and POPG monolayers exhibited two domains of differing size and morphology, showing a step height difference within the range expected for liquid-condensed and liquid-expanded phases. The images captured for χ(POPE) = 0.25 were featureless, and for χ(POPE) = 0.5 small microdomains were observed. The composition that mimics quantitatively the proportions found in the inner membrane of E. coli , χ(POPE) = 0.75, showed large liquid condensed domains in the liquid expanded phase. The extension of each domain was quantitatively analyzed. Because calcium is used in the formation of supported bilayers of negatively charged phospholipids, the possible influence of the nanostructure of the apical on the distal monolayer is discussed.     

Externally applied electric fields on immiscible lipid monolayers: repulsion between condensed domains precludes domain migration

Lipid and protein molecules anisotropically oriented at a hydrocarbon-aqueous interface configure a dynamic array of self-organized molecular dipoles. Electrostatic fields applied to lipid monolayers have been shown to induce in-plane migration of domains or phase separation in a homogeneous system. In this work, we have investigated the effect of externally applied electrostatic fields on different lipid monolayers exhibiting surface immiscibility. In the monolayers studied, lipids in the condensed state segregate in discontinuous round-shaped domains, with the lipid in the liquid-expanded state forming the continuous phase. The use of fluorescent probes with selective phase partitioning allows analyzing by epifluorescence microscopy the migrations of the domains under the influence of inhomogeneous electric fields applied to the surface. Our observations indicate that a positive potential applied to an electrode placed over the monolayer promotes a repulsion of the domains until a steady state is reached, indicating the presence of a force opposed to the externally applied electric force. The experimental results were modeled by considering that the opposing force is generated by the dipole-dipole repulsion between the domains.