Photolysis of organopolysilanes. The reaction of photochemically generated methylphenylsilylene with conjugated dienes

Photolysis of 2-phenylheptamethyltrisilane (I) in the presence of acyclic and cyclic conjugated dienes has been investigated using both a high-pressure mercury lamp with a quartz filter and a low-pressure mercury lamp with a Vycor filter. Irradiation of I in the presence of 1,3-butadiene, isoprene or 2,3-dimethylbutadiene with a high-pressure mercury lamp gave a product arising from photochemical isomerization of a silacyclopropane derivative and a compound apparently formed by 1,4-silylene addition, along with a 1/1 “ene” adduct of the diene to a photo-rearranged intermediate containing the silicon—carbon double bond. Irradiation of I in the presence of the conjugated diene with a low-pressure mercury lamp, followed by treatment of the product with methanol, afforded a methoxysilane arising from methanolysis of the corresponding silacyclopropane, together with the isomerization product, silacyclopentene and rearranged addition product. Irradiation of I in the presence of cyclopentadiene with a high-pressure mercury lamp produced methylphenylsilylcyclopentadiene, while irradiation of a similar mixture with a low-pressure mercury lamp followed by treatment with methanol gave 4-(methoxymethylphenylsilyl)-1-cyclopentene. With 1,3-cyclooctadiene, the photochemically generated methylphenylsilylene afforded many types of addition product. Photolysis of I in the presence of 1,3-cyclohexadiene, however, afforded none of the silylene addition products.     

Adduct of dimedone and 1,2-dibenzoylethene in reactions with nitrogen binucleophiles

Dimedone adduct with 1,2-dibenzoylethene in reaction with p-phenylenediamine formed a bispyrrole derivative, and with benzidine and ethylenediamine afforded the corresponding monopyrroles. The reaction of the initial adduct with tryptamine results in a product containing a pyrrole and an indole fragments. Both versions of N-heterocyclization proceed in the reaction with urea yielding derivatives of tetrahydroindole and pyrrole. In the reaction with hydrazine hydrate a substituted pyridazine was obtained as a result of a dimedone molecule elimination from the intermediate cyclization product.     

Studies with polyfunctionally substituted heteroaromatics: New routes for the synthesis of polyfunctionally substituted pyridines and 1,2,4-triazolo[1,5-a]pyridines

The 1-substituted ethylidenemalononitriles 1a–c condensed with triethyl orthoformate in refluxing acetic anhydride to yield the dienes 2a–c . On the other hand, a mixture of N,N-dimethylformamide and triethyl orthoformate condensed with 1a–d to yield the N,N-dimethylaminopentadienonitriles 2d–g . The pentadienonitriles 2d–g were also formed from the reaction of 1a–d with dimethylformamide dimethylacetal in refluxing acetic acid. When compounds 1a–c were treated with dimethylformamide dimethylacetal in refluxing p-xylene, a mixture of 3 , 4 and 2e–g was formed. The reaction of 2a , b with hydrazine hydrate afforded the N-amino-2-iminopyridines 5a , b . These were converted into the triazolo[1,5-a]pyridines 8a–d on treatment with benzoyl chloride and with dimethylformamide dimethylacetal. On the other hand, the reaction of 2c with hydrazine hydrate afforded the pyrazolo[3,4-b]pyridine 7c . Treatment of 2a , c or 2e , g with cyanoethanoic hydrazide afforded the N-(cyanoacetamido)pyridines 9a , b . The dienes 2d , f , g afforded the pyridones 11a–c on treatment with acetic acid and hydrochloric acid mixture. Compounds 11b , c were also formed on treatment of 2b , c with acetic acid hydrochloric acid mixture. The reaction of 2d , g with ethanolic sodium ethoxide gave the ethoxypyridines 13a , b .     

On the shape of a hydrostatic meniscus attached to a corrugated plate or wavy cylinder

The shape of a hydrostatic meniscus attached at a fixed contact angle to a vertical plate or circular cylinder with periodic corrugations is studied by analytical and numerical methods, and the effect of wall irregularities on the shape of the contact line and vertical component of the capillary force is discussed. An asymptotic analysis for a plate with small-amplitude sinusoidal corrugations is carried out to first order with respect to the corrugation amplitude, and a boundary-value problem is formulated and solved by a shooting method to determine the meniscus shape and elevation of the contact line. The meniscus attached to a corrugated plate with rounded corners produced by a Schwarz-Christoffel mapping function for a triangular wave is considered by numerical methods. The Laplace-Young equation determining the meniscus shape is solved in orthogonal curvilinear coordinates generated by conformal mapping using a finite-difference method. The numerical results are successfully compared with the predictions of the perturbation expansion for small amplitudes and discussed with reference to the rise of a meniscus inside a dihedral angle for large amplitudes. A companion asymptotic analysis is presented for a meniscus outside a vertical circular cylinder with small-amplitude sinusoidal corrugations. The analytical predictions are successfully compared with numerical solutions of the Laplace-Young equation for a meniscus outside an elliptical cylinder with aspect ratio near unity, regarded as a deformed circle.     

分子动力学模拟研究纳米碳管中甲醇-水混合溶液的结构与输运性质

利用分子动力学模拟方法,对比考察了平衡条件、外压作用、梯度电场作用下,摩尔比为1:1的甲醇-水混合溶液在纳米碳管(CNT)中的静态结构以及输运行为.研究发现:在平衡体系与外压作用下,纳米碳管内甲醇与水呈现出明显的不混溶现象,甲醇主要分布于管壁附近,水分子主要分布于纳米碳管轴心附近;而在梯度电场作用下,纳米碳管由疏水性向亲水性转变,更多的水分子分布于管壁,导致纳米碳管内甲醇-水的不混溶现象消失.另一方面,在外压作用下,纳米碳管内甲醇与水呈现单向移动;而在梯度电场下,甲醇与水呈现快速的双向移动,其流通量较相应外压作用体系高出近一个数量级,但由于双向的流通量大小相近,导致净流通量与外压作用下的净流通量差异不大.     

Template synthesis of tungsten complexes with saturated N-heterocyclic carbene ligands

Tungsten complex with a coordinated 2-azidoethyl isocyanide ligand reacts with PMe3 at the azido function to give a complex with a coordinated iminophosphorane which upon hydrolysis of the P=N bond yields a complex with an NH,NH-stabilized N-heterocyclic carbene ligand, 7; alkylation of the carbene ring nitrogen atoms gives a complex with an N,N'-dialkylated imidazolidin-2-ylidene ligand, 8 .     

Luminescent silica nanoparticles modified with a functional pyrylocyanine dye

A method was developed for the chemical modification of silica nanoparticles with a pyrylium dye under the sol-gel synthesis conditions. The films of silica particles modified with a pyrylium dye gave greenish blue luminescence with a maximum at 490 nm upon treatment with a solution of butylamine. The film samples of silica nanoparticles modified with pyrylocyanine exhibited good light resistance.     

Stereoselective synthesis of 3-hydroxyproline benzyl esters from N-protected beta-aminoaldehydes and benzyl diazoacetate

The synthesis of a series of 3-hydroxyproline benzyl esters from alpha-alkyl and alpha-alkoxy N-protected aminoaldehydes with benzyl diazoacetate is described. Aldehydes with alpha-alkyl substituents afforded prolines as a single diastereomer with a trans-cis relative configuration in 14-77%. An alpha-tert-butyldimethylsilyloxy aminoaldehyde afforded a proline as a single diastereomer with a trans-trans relative configuration in 37% yield.     

Synthesis of Some Novel Heterocyclic Xylidinyl Amines and Carboxamides

The xylidines 1a , 1b undergo condensation with ethyl cyanoacetate 2 and ethyl benzoyl acetate 15 to afford the cyano acetanilides 3a , 3b and the β‐diketones 16a , 16b , respectively. Compounds 3a , 3b react with hydrazine and phenyl hydrazine to afford the azine‐bis derivatives 5a , 5b and 7a , 7b , whereas 16a , 16b react with the same reagents to afford the pyrazolyl amine derivatives 17a , 17b and 18a , 18b , respectively. Compounds 3a , 3b react also with dimethylformamide dimethylacetal to afford the enaminonitriles 8a , 8b , whereas 16a , 16b react with the same reagent to afford only the enaminone 19b . The enaminonitriles 8a , 8b react with hydrazine and phenyl hydrazine to afford also the azine‐bis derivatives 11a , 11b and 14a , 14b , respectively.     

Lattice models of branched polymers with specified topologies

As a step towards understanding the thermodynamics of multi-branched polymer systems, we look at a lattice model of a uniform branched polymer with fixed topology interacting with a surface and ask for the free energy of the polymer as the number of monomers which compose the polymer goes to infinity. The conformations of a uniform branched polymer with fixed topology are modelled by embeddings of a graph in the simple cubic lattice. Rigorous results about this model are reviewed. The results suggest that large branched polymers in three dimensions interacting with a plane have the same free energy as large linear polymers interacting with a plane; the same is not true, however, for the corresponding two-dimensional problem where the polymer interacts with a line.     

Zur reaktionvon cyclotri- und cyclotri- und cyclotetrasilazanen mit silylfluoriden

Fluorosilyl substituted cyclosilazanes are formed by treating lithium salts of hexamethylcyclotri- and octa-methylcyclotetrasilazanes with silicon tetrafluoride and organo-substituted silicon fluorides. Disubstituted compounds are obtained by the reaction of dilithium hexamethylcyclotrisilazane with silicon fluorides or by the reaction of lithium hexamethylcyclotrisilazane with silicon fluorides at higher temperature. Cyclosilazanes with bulky ligands react with butyllithium with elimination of butane as a first step and then react further with a silicon fluoride compound, with LiF-elimination, to give a mixed substituted cyclosilazane. Ring coupling through a silicon bridge is achieved by the reaction of a fluorosilyl-substituted cyclotrisilazane with lithium hexamethylcyclotrisilazane. The mass,¹H and¹⁹F NMR spectra of the compounds are reported.     

Sugar cane bagasse-lignin as photo-stabilizer for butadiene rubber

In this work we have studied the stabilizing effect of a natural antioxidant, sugar cane bagasse-lignin, on the photo-oxidation of a commercial sample of butadiene rubber. This stabilizer was investigated in various concentrations, in the pure form, and associated with a diamine or a phosphite stabilizer. Stabilization of butadiene rubber with this lignin associated with the diamine produced a material with a photo-chemical stability comparable to that of a stabilized commercial sample.     

Antireflection and self-cleaning properties of a moth-eye-like surface coated with TiO2 particles

Poly(ethylene terephthalate) (PET) films with a moth-eye-like surface are coated with TiO(2) particles to form self-cleaning antireflective films. The use of a TiO(2) suspension of high concentration to coat the PET surface produces a thicker TiO(2) layer with smaller pores, whereas a low concentration of a TiO(2) suspension gives a thinner layer of TiO(2) with larger pores. The PET films coated with TiO(2) particles exhibit a high transmittance of 76-95% and almost no absorption in the range of 400-800 nm. The PET films coated with a TiO(2) suspension with a concentration of ≥2 vol % exhibit superhydrophilicity after irradiation with UV light. After irradiation, the superhydrophilic nature is retained for at least 18 days. The TiO(2)-coated PET films showed the ability to decompose methylene blue under UV irradiation.     

Lattice Boltzmann simulations of droplet formation in a T-shaped microchannel

We investigated the formation of a droplet from a single pore in a glass chip, which is a model system for droplet formation in membrane emulsification. Droplet formation was simulated with the lattice Boltzmann method, a method suitable for modeling on the mesoscale. We validated the lattice Boltzmann code with several benchmarks such as the flow profile in a rectangular channel, droplet deformation between two shearing plates, and a sessile drop on a plate with different wetting conditions. In all cases, the modeling results were in good agreement with the benchmark. A comparison of experimental droplet formation in a microchannel glass chip showed good quantitative agreement with the modeling results. With this code, droplet formation simulations with various interfacial tensions and various flow rates were performed. All resulting droplet sizes could be correlated quantitatively with the capillary number and the fluxes in the system.     

四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

Towards a miniaturised system for dynamic field gradient focused separation of proteins

Separation and focusing of proteins is described in a miniaturised dynamic field gradient focusing device with a 2.5 cm x 0.1 cm channel filled with a porous polymer monolith. The separation channel is in contact with a parallel electric field channel with five individually addressable electrodes through a porous glass membrane so that a variable field can be generated that drives charged proteins electroosmotically against a constant hydrodynamic flow. Separated pre-stained proteins were detected by means of a digital camera and background subtraction.     

Low-bandgap donor-acceptor conjugated polymer sensitizers for dye-sensitized solar cells

A set of two donor-acceptor type conjugated polymers with carboxylic acid side groups have been synthesized and utilized as active materials for dye-sensitized solar cells (DSSCs). The polymers feature a π-conjugated backbone consisting of an electron-poor 2,1,3-benzothiadiazole (BTD, acceptor) unit, alternating with either a thiophene-fluorene-thiophene triad (2a) or a terthiophene (3a) segment as the donor. The donor-acceptor polymers absorb broadly throughout the visible region, with terthiophene-BTD polymer 3a exhibiting an absorption onset at approximately 625 nm corresponding to a ～1.9 eV bandgap. The polymers adsorb onto the surface of nanostructured TiO(2) due to interaction of the polar carboxylic acid units with the metal oxide surface. The resulting films absorb visible light strongly, and their spectra approximately mirror the polymers' solution absorption. Interestingly, a series of samples of 3a with different molecular weight (M(n)) adsorb to TiO(2) to an extent that varies inversely with M(n). DSSCs that utilize the donor-acceptor polymers as sensitizers were tested using an I(-)/I(3)(-) electrolyte. Importantly, for the set of polymer sensitizers 3a with varying M(n), the DSSC efficiency varies inversely with M(n), a result that reflects the difference in adsorption efficiency observed in the film absorption experiments. The best DSSC cell tested is based on a sample of 3a with M(n) ～ 4000, and it exhibits a ～65% peak IPCE with J(sc) ～12.6 mA cm(-2) under AM1.5 illumination and an overall power conversion efficiency of ～3%.     

Reaction of zirconacyclopentadienes with electrophiles such as benzaldehyde, methyl methacrylate and 1-bromo-2-butyne after treatment with RLi

Zirconacyclopentadienes reacted with electrophiles after treatment with alkyllithium. For example, the reaction with benzaldehyde after treatment with methyllithium to give a nucleophilic addition product of a dienyl moiety to aldehyde, dienylcarbinol, in a moderate yield. Similar reaction of a zirconacyclopentadiene using butyllithium with methyl methacrylate afforded a Michael addition product in a good yield. Treatment of zirconacyclopentadienes with n-BuLi followed by 1-bromo-2-butyne gave a mono-propargylated diene derivative in 95% yield after hydrolysis. When propargyl chloride was treated with n-BuLi first and then added to zirconacyclopentadienes, penta-substituted benzene derivatives were formed in high yields.     

分子动力学模拟研究纳米碳管中甲醇-水混合溶液的结构与输运性质

利用分子动力学模拟方法,对比考察了平衡条件、外压作用、梯度电场作用下,摩尔比为1：1 的甲醇-水混合溶液在纳米碳管（CNT）中的静态结构以及输运行为. 研究发现：在平衡体系与外压作用下,纳米碳管内甲醇与水呈现出明显的不混溶现象,甲醇主要分布于管壁附近,水分子主要分布于纳米碳管轴心附近;而在梯度电场作用下,纳米碳管由疏水性向亲水性转变,更多的水分子分布于管壁,导致纳米碳管内甲醇-水的不混溶现象消失. 另一方面,在外压作用下,纳米碳管内甲醇与水呈现单向移动;而在梯度电场下,甲醇与水呈现快速的双向移动,其流通量较相应外压作用体系高出近一个数量级,但由于双向的流通量大小相近,导致净流通量与外压作用下的净流通量差异不大.     

Halogenation of carbon substrates for increased reactivity with alkenes

Carbon substrates are readily functionalized with alkene-containing molecules via an ultraviolet-light-catalyzed reaction, resulting in the formation of a carbon-carbon bond with the surface. This reaction is typically performed on hydrogen-terminated carbon substrates, limiting its utility as alkene molecules with low electron affinities do not readily attach to this surface. Recently, a wet-chemical method for preparing bromine- and chlorine-terminated carbon substrates has been developed. Replacing the terminal hydrogen atoms with a halogen analog increases the surface's reactivity with alkene-containing molecules, affording a means of modifying the carbon substrate with the alkene molecules that do not readily attach to the hydrogen-terminated surface and with a greatly reduced reaction time.