锂空气电池高容量长寿命Co3O4纳米空心球阴极催化剂

以六水合硝酸钴（Co(NO₃)₂·6H₂O）、六次甲基四胺（HMT）、蔗糖、柠檬酸钠（Na₃C₆H₅O₇）为原料,140 ^oC下水热碳化处理即得反应前驱物,经煅烧处理后,可得多孔Co₃O₄纳米空心球. 锂空气电池Co₃O₄/SP阴极催化剂具有优异的循环寿命性能,这归因于Co₃O₄空心球的纳米颗粒构成、较高比表面积的多孔结构,为电池反应提供了大量的反应位点,为充放电产物提供了足够的存储空间.     

(3,3)-Connected Three-dimentional Supramolecular Metal Organic Polyhedral Based on Nanometresized Ligand with Magnetism Properties

A three-dimentinal metal organic framework[Co₂(L)Cl(DMF)₂(H₂O)](DMF)₃(H₂O)₃ based on the nanometresized ligand 4,4',4"-[1,3,5-benzenetriyltris(carbonylimino)]trisbenzoic acid was synthesized, and characterized by means of single-crystal X-ray diffraction, elemental analysis, infrared spectroscopy, thermogravimetry analysis and magnetism. This obtained structure can be considered to be constructed from 2D layer, which displays the topology of hbc based on Co₂(COO)₃ secondary building unit, and further to be linked into a 3D supramolecular architecture by N-H…O hydrogen bonds. The magnetism of the complex was carried out, which shows ferromagnetic exchange interactions.     

基于磺酰基杯[4]芳烃的Co16笼簇的合成、结构及电化学性质

以氯化钴、 对叔丁基磺酰杯[4]芳烃(H₄TC4A-SO₂)和非对称性3-(1H-四唑-5-基)苯甲酸(H₂L)为原料, 通过溶剂热法合成了一个具有四面体配位笼结构的16核化合物[Co₁₆(TC4A-SO₂)₄(OH)₄(L)₈]·[(C₈H₂₀N)(C₄H₁₂N)₂(C₂H₈N)]·solvent(Co₁₆-TC4A-SO₂). 采用X射线单晶衍射、 X射线粉末衍射、 热重分析、 红外光谱方法对配合物进行了表征. 将Co₁₆-TC4A-SO₂笼簇直接负载到碳纸上(Co₁₆-TC4A-SO₂/CP)用作工作电极, 其对析氧反应(OER)展现出较好的催化性能. 在1 mol/L KOH中, Co₁₆-TC4A-SO₂/CP在343.8 mV的过电位下达到10.0 mA/cm ²电流密度, Tafel斜率为79.31 mV/dec, 并且在20.0 mA/cm ²电流密度下表现出长达48 h的催化稳定性.     

Two-dimensional cobalt metal-organic frameworks for efficient C3H6/CH4 and C3H8/CH4 hydrocarbon separation

A Co-based two-dimensional (2D) microporous metal-organic frameworks (UPC-32) with narrow distance between layers and layers (3.8 Å) exhibits high selectivity of C₃H₆/CH₄ (31.46) and C₃H₈/CH₄ (28.04) at 298 K and 1 bar. It is the first 2D Co-MOF that showed selective separation of C3 hydrocarbon from CH₄.     

A new approach to the synthesis of carbon chains capped by metal clusters

Reactions of Co₃(μ₃-CBr)(μ-dppm)(CO)₇ with {Au[P(tol)₃]}₂{μ-(CC)_n} (n=2–4) have given {Co₃(μ-dppm)(CO)₇}{μ₃:μ₃-C(CC)_nC} [n=2 (1), 3 (2), 4 (3)] containing carbon chains capped by the cobalt clusters. Tetracyanoethene reacts with 2 to give {Co₃(μ-dppm)(CO)₇}₂{μ₃:μ₃-C(CC)₂C[=C(CN)₂]C[=C(CN)₂]C} (4). X-ray structural characterisation of 1, 3 and 4 are reported, that for 3 being the first of a cluster-capped C₁₀ chain.     

Polyoxometalate-based high-nuclear cobalt-vanadium-oxo cluster as efficient catalyst for visible light-driven CO2 reduction

A high-nuclear {Co₁₆-V₄} cluster was firstly isolated by pure inorganic lacunary POM units, which exhibits excellent photocatalytic activity for CO₂-to-CO conversion under visible light irradiation.     

Synthesis and X-ray crystal structures of bis(bis(μ2-2-aminoethanolato–N,O,O)–cobalt(III))–cobalt(II) hydrate, tris(biscyclohexylammonium)μ-hydroxo–bis(μ2-nitro–N,O)–hexanitro–dicobaltate(III) and biscyclohexylammonium nitrate(III)

Two new cobalt complexes: Co₃(NO₂)₄(NH₂CH₂CH₂O)₄·H₂O (1) and (NH₂(C₆H₁₁)₂)₃[Co₂(NO₂)₈OH]·3H₂O (2) and the compound (NH₂(C₆H₁₁)₂)NO₂ (3) were synthesised and their structures have been determined using single-crystal X-ray diffraction. Compound 1 consists of two centrosymmetrical trinuclear complexes and a water molecule of crystallization. Ligands coordinated to Co atoms are nitro and aminoethanolato groups. Structure 2 is built up of biscyclohexylammonium cations, dinuclear anions with hydroxo and nitro groups coordinated to Co atoms and water molecules. The coordination of Co atoms in both structures is roughly octahedral.     

Surface characterization of silica-supported cobalt oxide catalysts

Silica supported cobalt oxides were prepared by the impregnation method, using an aqueous solution of cobalt nitrate hexahydrate (Co(NO₃)₂ · 6H₂O), then calcined at different temperatures (510, 620 and 870 K). Characterization of the samples was carried out by X-ray diffraction, N₂-adsorption at −196°C, UV–Vis diffuse reflectance spectroscopy and KBr-IR spectroscopy of the calcination products. The surface acidity was studied by IR spectroscopy of adsorbed pyridine at different temperatures (300, 370, 470 and 570 K). Results indicated that Co₃O₄ is the stable phase on silica, however, dispersion of minor amount of cobalt oxide could not be ruled out. Results also indicated that the crystallinity of the formed Co₃O₄ increased by increasing the loading level and/or the calcination temperature. Furthermore, the surface area of the support was decreased by increasing the loading level and the calcination temperatures. It has been also found that the surface of the supported catalysts exposed strong different Lewis acid sites.     

Dinuclear transition metal compounds of a decadentate pyrazole-containing chelating ligand. X-ray crystal structure of Co2(tthd)(ClO4)4(H2O)2(MeOH)1.75

A potentially decadentate ligand, 1,1,4,7,10,10-hexakis(3,5-dimethyl-1-pyrazolylmethyl)-1,4,7,10-tetraazadecane (tthd), has been synthesized from the reaction of tri-ethylenetetramine with six equivalents of N-hydroxymethyl-3,5-dimethylpyrazole. The tthd ligand forms coordination compounds, M₂(tthd)(ClO₄)₄(H₂O)_x, when M is Co, Ni, Cu, Zn and Cd and x = 4–8; and M₂(tthd)(A)₂(ClO₄)₂(H₂O)_x when M is Co and Ni, A is NCS or Cl, and x = 4–8. The cobalt compound, Co₂(tthd)(ClO₄)₂(H₂O)₂(MeOH)_1.75, crystallizes in the triclinic space group P1, a = 1.959(2), b = 1.5657(3), c = 2.1244(3) nm, = 105.5(1), β = 96.9(1), γ = 112.1(1). Due to severe disorder of the anions the structure could only be refined to an R_w, value of 0.099. The ligand acts as a decadentate, dinucleating ligand. The cobalt ions are distorted octahedrally surrounded by five N-atoms of the tthd ligand and an O-atom of water occupying the sixth coordination place. The other perchlorate compounds have very similar structures, as can be concluded from spectroscopic data.

In the thiocyanate and chloride compounds the anions have replaced the coordinated water molecules, resulting in octahedral Ni compounds. With Co thiocyanate, however, tthd acts as an octadentate ligand, resulting only in five-coordinated compounds.     

Homochiral cobalt(II) and strontium(II) amino-carboxylate–phosphonate hybrids

Two homochiral metal amino-carboxylate–phosphonate hybrids, namely, [Co₂Cl(S-HL)(H₂O)₅]Cl · H₂O 1 and Sr₂(S-HL)(NO₃)₂(H₂O) · H₂O 2 (S-H₃L = S-HO₂CC₄H₇NCH₂PO₃H₂) have been synthesized by the reaction of the enantiopure S-H₃L ligand with cobalt(II) chloride or strontium nitrate under acidic condition at room temperature. The structure of compound 1 features a novel 3D framework with helical chains and channels. Compound 2 has a layered structure in which the 1D chains of edge-sharing SrO₈ and SrO₉ polyhedra are interconnected by phosphonate ligands.     

Ruthenium nanoclusters anchored on cobalt phosphide hollow microspheres by green phosphating process for full water splitting in acidic electrolyte

Transition metal phosphide(TMP) based electrocatalysts possessing special crystal and electronic structures attract broad attention in the field of electrocatalysis.Immense effort is made to optimize TMP catalysts aiming to satisfy the electrochemical catalysis performance.In this work,an environmentally friendly in situ green phosphating strategy and spatial limiting effect of the RuCo precursor is employed to fabricate the ruthenium nanoclusters anchored on cobalt phosphide hollow microspheres(Ru NCs/Co₂P HMs).The obtained Ru NCs/Co₂P HMs electrocatalysts exhibit high hydrogen evolution reaction(HER) activity at wide pH ranges,which require an overpotential of 77 mV to achieve the current density of 10 mA/cm² in 0.5 mol/L H₂SO₄ and 118 mV in 1.0 mol/L KOH.Besides,the multifunctional Ru NCs/Co₂P HMs exhibit good oxygen evolution reaction(OER) activity with an overpotential of 197 mV to reach the current density of 10 mA/cm² in 0.5 mol/L H₂SO₄,which is below that of the commercial RuO₂ electrocatalyst(248 mV).A two-electrode electrolyzer is assembled as well,in acid electrolyte,it achieves a current density of 10 mA/cm² at a voltage of 1.53 V,which is superior to that of the benchmark of precious metal-based electrolyzer(1.58 V).     

系列Ln(Ⅲ)配聚物的合成、结构及近红外发光性能

通过水热反应合成5种结构新颖的配聚物:{[Ln_2(1,3-bdc)_3(H_2O)_4](DMF(H_2O}_n[Ln=Pr(1),Nd(2),Gd(3)]和{[Ln_4(1,3-bdc)_6(H_2O)_4(DMF)](DMF(2H_2O}_n[Ln=Er(4),Ho(5)](1,3-bdc:间苯二甲酸,DMF:N,N-二甲基酰胺)。通过单晶X射线衍射、红外光谱、紫外-可见-近红外(UV-Vis-NIR)光谱、荧光光谱等技术手段对产物的结构和性能进行了表征。结果表明,配聚物1~3是同构的,属单斜晶系,P2(1)/n空间群;配聚物4、5是同构的,属三斜晶系,P-1空间群。在晶体中,间苯二甲酸根采用多样的配位模式,使配聚物呈现多维的结构。除配聚物4,其余均呈现Ln(Ⅲ)的特征NIR发光,并与其UV-Vis-NIR吸收光谱相关联。     

Two Pentavanadate-based Organic-inorganic Materials with Third-order NLO Properties

Two isolated organic-inorganic pentavanadate-based hybrids,[H2N(CH3)2]6.34[V^V(μ3-O)4V4^IVO5(SO4)4]·(SO4)0.67·(DMF)·[HN(CH3)2]1.66(1)and [(HN)2(CH2)2(CH3)4][V^V(μ3-O)4V4^IVO5(SO4)4][H2N(CH3)2]3@(DMF)@ [HN(CH3)2]0.5(2)(DMF=N,N-dimethylformamide)have been synthesized under solvothermal conditions and structurally characterized.In compound 1,three adjacent basic units form a triangle type cluster.The symmetric double-layer exists in compound 2.The study of the third-order nonlinear optical(NLO)properties for the two compounds demonstrates that the two-photon absorption(TPA)cross-section σ values of compounds 1 and 2 are 1372 and 1228 GM,respectively,indicating that both compounds may have potential application in optical field.     

Characterization and crystal structures of copper(II), cobalt(II), and nickel(II) complexes with two kinds of piperidine carboxylic acids

Copper(II) complex with -piperidine-3-carboxylic acid ( -Hpipe-3):[Cu( -pipe-3)₂(H₂O)] and cobalt(II) and nickel(II) complexes with piperidine-4-carboxylic acid (Hpipe-4):[M(Hpipe-4)₂(H₂O)₄]Cl₂ (M: Co, Ni) have been prepared and characterized by means of IR and powder diffuse reflection spectra, thermal analysis, and magnetic susceptibility. The crystal structures of these complexes have been determined by X-ray diffraction. The crystal of [Cu( -pipe-3)₂(H₂O)] is orthorhombic with the space group Pbcn. The copper atom is in a square pyramidal geometry, ligated by two carboxylato oxygen atoms, two nitrogen atoms, and a water molecule. One molecule of this complex consists of either -piperidine-3-carboxylic acid or -piperidine-3-carboxylic acid. The crystals of [M(Hpipe-4)₂(H₂O)₄]Cl₂ are monoclinic with space group P2₁/n. In these complexes the metal atom is in an octahedral geometry ligated by two carboxylato oxygen atoms and four water molecules.     

乙二醇促进制备高分散的Co/SiO2催化剂及其催化乳酸乙酯转化为1,2-丙二醇的气相加氢活性

研究了利用乙二醇共浸渍方法制备高分散的二氧化硅负载钴催化剂,该催化剂有效地提高了乳酸乙酯的气相加氢反应活性。系统地考察了钴金属负载量、乙二醇与硝酸钴摩尔比、醇种类和焙烧温度等制备参数对四氧化三钴纳米粒子物性的影响。乙二醇与硝酸钴摩尔比和醇种类对二氧化硅负载的四氧化三钴纳米粒子大小有显著影响。与常规的浸渍方法相比较,共浸渍过程中的乙二醇增强了二价钴粒子和载体二氧化硅之间的相互作用力,从而引起金属钴分散度的提高以及四氧化三钴纳米粒子粒径从16 nm降到5 nm以下;金属钴的高分散与无定型硅酸钴的形成密切相关;同时显著地提高了乳酸乙酯的加氢活性,在反应条件下(2.5MPa、160 ℃和10%(w,质量分数)Co/SiO₂)乳酸乙酯的转化率从69.5%提高到98.6%,1,2-丙二醇的选择性达到98.0%。利用X射线衍射(XRD)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、N₂吸脱附实验、H₂程序升温还原(H₂-TPR)等表征手段对共浸渍制备的Co/SiO₂催化剂结构和形貌进行了表征分析。     

Four Coordination Polymers Assembled with a New Biscarboxyl-functionalized Schiff Base Ligand

Based on a new biscarboxyl-functionalized Schiff base ligand 1,2-cyclohexanediamino-N,N'-bis[3-methoxyl-5-(p-carboxyl-phenylazo)] salicylidene(H₄L), four polymers,[(CH₃)₂NH₂]₂·[Mn₃(L)₂(H₂O)₄]·2DMF(CP1),[Fe₂(L)(H₂O)(DMF)](CP2),[(CH₃)₂NH₂]·[Cu(HL)]·H₂O(CP3) and[Ni₂(L)(teta)]·2DMF·H₂O(CP4), have been synthesized(teta=5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane). In CP1, both of the internal[N₂O₂] pocket and the external carboxylate groups of L^4- anion are ligated by Mn²⁺ ions, and the structure displays a layer. In CP2, the Fe²⁺ cations are linked by L^4- anions to form a binuclear double chain. CP3 displays a[Cu₂(HL)₂] dimer. In CP4, the Ni²⁺ ions are connected by L^4- anions to form a chain. The structures are further linked by hydrogen bonds to form 2D or 3D supramolecular architectures, respectively. CP1 exhibits adsorption ability to three organic dyes.     

Zn(Ⅱ)与5-氨基四氮唑和1,4-对苯二甲酸配位聚合物的溶剂可控合成

以5-氨基四氮唑（HATz）、1,4-对苯二甲酸（H₂BDC）和Zn（NO₃）₂为反应物,在水热条件下得到了1个二维层结构的Zn（Ⅱ）配位聚合物{[Zn₂（ATz）₂（BDC）（H₂O）₂] ·H₂O}_n（1）,而在N,N’-二甲基甲酰胺（DMF）溶剂热条件下得到了1个三维结构的Zn（Ⅱ）配位聚合物{[Zn₂（ATz）₂（BDC）（DMF）₂] }_n（2）. 通过元素分析、红外光谱、单晶X射线衍射和粉末X射线衍射等对它们的组成和结构进行了表征. 单晶结构分析结果表明,配合物1是以Zn（Ⅱ）离子作连接点、μ₂-ATz^-和μ₂-BDC^2-作连接子形成的3-连接（6,3）蜂窝型二维层结构,二维层之间再通过氢键作用形成三维超分子结构. 配合物2是以两羧基桥连的双核Zn（Ⅱ）单元[Zn₂（CO）₂] 作连接点、μ₂-ATz^-和μ₄-BDC^2-作连接子形成的6-连接简单立方格子的三维金属-有机框架结构. 室温固体荧光实验表明,在350 nm的光激发下,配合物1和2分别在451和466 nm处出现强烈的荧光发射.     

An anionic In(III)-based metal-organic framework with Lewis basic sites for the selective adsorption and separation of organic cationic dyes

An In(Ⅲ)-based metal-organic framework (BUT-29) can selectively absorb cationic dyes in DMF even in the presence of other organic dyes, and has the higher adsorption capacity.     

Synthesis, crystal structure and magnetic behavior of two cobalt coordination polymers with 1,2-bis(1,2,4-triazol-1-yl)ethane and dicyanamide

Two cobalt(II) coordination polymers formed from bte (bte = 1,2-bis(1,2,4-triazol-1-yl)ethane), namely [Co(bte)₂(dca)₂]_n (1) and {[Co(bte)(dca)₂] · H₂O}_n (2), have been synthesized and characterized by elementary analyses, IR, thermogravimetric analyses, X-ray diffraction analyses and magnetic measurements. Compound 1 is a double-chain with Co(II) centers bridged by bte, containing metallocycles of [Co₂(bte)₂] and trans dca as termination ligands. In 2, each Co(II) center is bonded by two bridging bte ligands and four dca as μ-1,5-dca in different orientations in the 3D network.     

Crystal structure and luminescence property of ternary terbium p-aminobenzoic acid complexes with different second ligands

Ternary terbium complexes with p-aminobenzoic acid (HL), [TbL₃(DMSO)(H₂O)]₂ (1), [TbL₃(DMF)(H₂O)]₂ (2) and [TbL₃(Bpy)(H₂O)]₂·2H₂O (3) (DMSO=dimethyl sulfoxide, DMF=N, N- dimethylformamide, Bpy=2, 2′- bipyridyl) have been synthesized, and their crystal structures determined. The luminescence properties of these complexes, including both the emission quantum yield and the fluorescence lifetime, have been investigated. The effect of a second ligand on the crystal structure and luminescence property of the ternary terbium p-aminobenzoic acid complexes, and the relationship between luminescence properties and crystal structure, including coordination mode of the L⁻ ligand and the characteristics of a second ligand, are discussed.