Study on mechanism for oxidation of <Emphasis Type="Italic">N,N</Emphasis>-dimethylhydroxylamine by nitrous acid

The oxidation of N,N-dimethylhydroxylamine (DMHAN) by nitrous acid is investigated in perchloric acid and nitric acid medium, respectively. The effects of H⁺, DMHAN, ionic strength and temperature on the reaction are studied. The rate equation in perchloric acid medium has been determined to be −d[HNO₂]/dt = k[DMHAN][HNO₂], where k = 12.8 ± 1.0 (mol/L)⁻¹ min⁻¹ when the temperature is 18.5 °C and the ionic strength is 0.73 mol/L with an activation energy about 41.5 kJ mol⁻¹. The reaction becomes complicated when it is performed in nitric acid medium. When the molarity of HNO₃ is higher than 1.0 mol/L, nitrous acid will be produced via the reaction between nitric acid and DMHAN. The reaction products are analyzed and the reaction mechanism is discussed in this paper.     

Catalytic and Thermodynamic Characterization of Endoglucanase (CMCase) from <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> cmc-1

Monomeric extracellular endoglucanase (25 kDa) of transgenic koji (Aspergillus oryzae cmc-1) produced under submerged growth condition (7.5 U mg⁻¹ protein) was purified to homogeneity level by ammonium sulfate precipitation and various column chromatography on fast protein liquid chromatography system. Activation energy for carboxymethylcellulose (CMC) hydrolysis was 3.32 kJ mol⁻¹ at optimum temperature (55 °C), and its temperature quotient (Q ₁₀) was 1.0. The enzyme was stable over a pH range of 4.1–5.3 and gave maximum activity at pH 4.4. V _max for CMC hydrolysis was 854 U mg⁻¹ protein and K _m was 20 mg CMC ml⁻¹. The turnover (k _cat) was 356 s⁻¹. The pK _a1 and pK _a2 of ionisable groups of active site controlling V _max were 3.9 and 6.25, respectively. Thermodynamic parameters for CMC hydrolysis were as follows: ΔH* = 0.59 kJ mol⁻¹, ΔG* = 64.57 kJ mol⁻¹ and ΔS* = −195.05 J mol⁻¹ K⁻¹, respectively. Activation energy for irreversible inactivation ‘E _a(d)’ of the endoglucanase was 378 kJ mol⁻¹, whereas enthalpy (ΔH*), Gibbs free energy (ΔG*) and entropy (ΔS*) of activation at 44 °C were 375.36 kJ mol⁻¹, 111.36 kJ mol⁻¹ and 833.06 J mol⁻¹ K⁻¹, respectively.     

Low-temperature thermodynamic properties of <Emphasis Type="Italic">L</Emphasis>-cysteine

Heat capacity C _p(T) of the orthorhombic polymorph of L-cysteine was measured in the temperature range 6–300 K by adiabatic calorimetry; thermodynamic functions were calculated based on these measurements. At 298.15 K the values of heat capacity, C _p; entropy, S _m⁰(T)-S _m⁰(0); difference in the enthalpy, H _m⁰(T)-H _m⁰(0), are equal, respectively, to 144.6±0.3 J K⁻¹ mol⁻¹, 169.0±0.4 J K⁻¹ mol⁻¹ and 24960±50 J mol⁻¹. An anomaly of heat capacity near 70 K was registered as a small, 3–5% height, diffuse ‘jump’ accompanied by the substantial increase in the thermal relaxation time. The shape of the anomaly is sensitive to thermal pre-history of the sample.     

Influence of cerium(IV) and manganese(II) on the oxidation of <Emphasis Type="Italic">D</Emphasis>-galactose by chromium(VI) in the presence of HClO<Subscript>4</Subscript>

The kinetics and mechanism of the oxidation of D-galactose by chromium(VI) in the absence and presence of cerium(IV) and manganese(II) were studied spectrophotometrically in aqueous perchloric acid media. The reaction is first order in both [D-galactose] and [H⁺]. The cerium(IV) inhibits the oxidation path, whereas manganese(II) catalyzes the reactions. The observed inhibitory role of cerium(IV) suggests the formation of chromium(IV) as an intermediate. In the manganese(II) catalyzed path, the D-galactose-manganese(II) complex was considered to be an active oxidant. In this path, the complex forms a ternary chromate ester with chromium(IV) which subsequently undergoes acid catalyzed redox decomposition (one-step three-electron transfer: Indian J. Chem., 2004, vol. 42A, p. 1060; Colloids and Surfaces, 2001, vol. 193, p. 1) in the rate determining step. On the basis of kinetic data, the mechanism of D-galactose oxidation is proposed for parent, the manganese(II) catalyzed and cerium(IV) — inhibited reactions. The activation parameters E _a = 59 kJ ΔH ^# = 57 kJ mol⁻¹, and ΔS ^# = −119 J K⁻¹ mol⁻¹ are calculated and discussed. Reaction products are also examined. Published in Russian in Kinetika i Kataliz, 2009, Vol. 50, No. 1, pp. 90–95. This article was submitted by the authors in English.     

Thermodynamic investigation of room temperature ionic liquid

The molar heat capacities of the room temperature ionic liquid 1-butylpyridinium tetrafluoroborate (BPBF₄) were measured by an adiabatic calorimeter in temperature range from 80 to 390 K. The dependence of the molar heat capacity on temperature is given as a function of the reduced temperature X by polynomial equations, C _p,m [J K⁻¹ mol⁻¹]=181.43+51.297X −4.7816X ²−1.9734X ³+8.1048X ⁴+11.108X ⁵ [X=(T−135)/55] for the solid phase (80–190 K), C _p,m [J K⁻¹ mol⁻¹]= 349.96+25.106X+9.1320X ²+19.368X ³+2.23X ⁴−8.8201X ⁵ [X=(T−225)/27] for the glass state (198–252 K), and C _p,m[J K⁻¹ mol⁻¹]= 402.40+21.982X−3.0304X ²+3.6514X ³+3.4585X ⁴ [X=(T−338)/52] for the liquid phase (286–390 K), respectively. According to the polynomial equations and thermodynamic relationship, the values of thermodynamic function of the BPBF₄ relative to 298.15 K were calculated in temperature range from 80 to 390 K with an interval of 5 K. The glass transition of BPBF₄ was observed at 194.09 K, the enthalpy and entropy of the glass transition were determined to be ΔH _g=2.157 kJ mol⁻¹ and ΔS _g=11.12 J K⁻¹ mol⁻¹, respectively. The result showed that the melting point of the BPBF₄ is 279.79 K, the enthalpy and entropy of phase transition were calculated to be ΔH _m = 8.453 kJ mol⁻¹ and ΔS _m=30.21 J K⁻¹ mol⁻¹. Using oxygen-bomb combustion calorimeter, the molar enthalpy of combustion of BPBF₄ was determined to be Δ_c H _m⁰ = −5451±3 kJ mol⁻¹. The standard molar enthalpy of formation of BPBF₄ was evaluated to be Δ_f H _m⁰ = −1356.3±0.8 kJ mol⁻¹ at T=298.150±0.001 K.     

Thermodynamic properties of strontium metaniobate SrNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

The heat capacity and the enthalpy increments of strontium metaniobate SrNb₂O₆ were measured by the relaxation method (2-276 K), micro DSC calorimetry (260-320 K) and drop calorimetry (723-1472 K). Temperature dependence of the molar heat capacity in the form C _pm=(200.47±5.51)+(0.02937±0.0760)T-(3.4728±0.3115)·10⁶/T ² J K⁻¹ mol⁻¹ (298-1500 K) was derived by the least-squares method from the experimental data. Furthermore, the standard molar entropy at 298.15 K S _m⁰ (298.15 K)=173.88±0.39 J K⁻¹ mol⁻¹ was evaluated from the low temperature heat capacity measurements. The standard enthalpy of formation Δ_f H ⁰ (298.15 K)=-2826.78 kJ mol⁻¹ was derived from total energies obtained by full potential LAPW electronic structure calculations within density functional theory.     

Study on the thermodynamic properties of cholesterol

The standard molar enthalpy of combustion of cholesterol was measured at constant volume. According to value of Δ_r U _m^θ(−14358.4±20.65 kJ mol⁻¹), Δ_r H _m^θ(−14385.7 kJ mol⁻¹) of combustion reaction and Δ_f H _m^θ(2812.9 kJ mol⁻¹) of cholesterol were obtained from the reaction equation. The enthalpy of combustion reaction of cholesterol was also estimated by the average bond enthalpies. By design of a thermo-chemical recycle, the enthalpy of combustion of cholesterol were calculated between 283.15∼373.15 K. Besides, molar enthalpy and entropy of fusion of cholesterol was obtained by DSC technique.     

Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.     

Transitions among five polymorphs of chlorpropamide near the melting point

Five polymorphs of chlorpropamide (α, β, δ, γ, and ε) were investigated near the melting point by using DSC. Structure of samples was tested by X-ray powder diffraction. Four first polymorphs were found to transform into ε-polymorph, which melts at T _m=128°C, Δ_m H=24 kJ mol⁻¹. Enthalpy of the polymorph transitions ranges from +3 kJ mol⁻¹ for α→ε to −0.8 kJ mol⁻¹ for β→ε. Structure of three first polymorphs was published elsewhere, and the structure of δ-polymorph is published for the first time. XRPD patterns for all polymorphs are reported, together with the atomic coordinates for the δ-polymorph.     

Thermochemical study on ternary complex of dysprosium <Emphasis Type="Italic">m</Emphasis>-nitrobenzoic acid with <Emphasis Type="Italic">o</Emphasis>-phenanthroline

A ternary binuclear complex of dysprosium chloride hexahydrate with m-nitrobenzoic acid and 1,10-phenanthroline, [Dy(m-NBA)₃phen]₂·4H₂O (m-NBA: m-nitrobenzoate; phen: 1,10-phenanthroline) was synthesized. The dissolution enthalpies of [2phen·H₂O(s)], [6m-HNBA(s)], [2DyCl₃·6H₂O(s)], and [Dy(m-NBA)₃phen]₂·4H₂O(s) in the calorimetric solvent (V_DMSO:V_MeOH = 3:2) were determined by the solution–reaction isoperibol calorimeter at 298.15 K to be \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2phen·H₂O(s), 298.15 K] = 21.7367 ± 0.3150 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [6m-HNBA(s), 298.15 K] = 15.3635 ± 0.2235 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2DyCl₃·6H₂O(s), 298.15 K] = −203.5331 ± 0.2200 kJ·mol⁻¹, and \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = 53.5965 ± 0.2367 kJ·mol⁻¹, respectively. The enthalpy change of the reaction was determined to be \Updelta_\textr H_\textm^q = 3 6 9. 4 9 ±0. 5 6   \textkJ·\textmol ^{- 1} . \Updelta_{\text{r}} H_{\text{m}}^{\theta } = 3 6 9. 4 9 \pm 0. 5 6 \;{\text{kJ}}\cdot {\text{mol}}^{ - 1} . According to the above results and the relevant data in the literature, through Hess’ law, the standard molar enthalpy of formation of [Dy(m-NBA)₃phen]₂·4H₂O(s) was estimated to be \Updelta_\textf H_\textm^q \Updelta_{\text{f}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = −5525 ± 6 kJ·mol⁻¹.     

Calculations of thermodynamic stability of CpCoC<Subscript>2</Subscript>B<Subscript>9</Subscript>H<Subscript>11</Subscript> cobaltacarborane isomers

Quantum-chemical calculations of the geometry and energies of nine possible isomers of 12-vertex cobaltacarborane CpCoC₂B₉H₁₁ (1) were carried out by the DFT method (PBEPBE/DGDZVP/DGA1). Thermodynamic stability of the isomers increases with increasing distance between the carbon atoms in the cage and is virtually independent of the position of the CpCo vertex. The relative stabilities of the 1,2,3-(17.57 kcal mol⁻¹), 1,2,4-(3.72 kcal mol⁻¹), and 1,2,9-isomers of 1 (0 kcal mol⁻¹) are similar to the corresponding values for the ortho (17.61 kcal mol⁻¹), meta (3.21 kcal mol⁻¹), and para isomers (0 kcal mol⁻¹) of carborane C₂B₁₀H₁₂. The results of the present study confirm a close similarity of the CpCo and BH fragments in metallacarborane chemistry. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1557–1559, July, 2005.     

Thermal behavior and thermal safety on 3,3-dinitroazetidinium salt of perchloric acid

3,3-Dinitroazetidinium (DNAZ) salt of perchloric acid (DNAZ·HClO₄) was prepared, it was characterized by the elemental analysis, IR, NMR, and a X-ray diffractometer. The thermal behavior and decomposition reaction kinetics of DNAZ·HClO₄ were investigated under a non-isothermal condition by DSC and TG/DTG techniques. The results show that the thermal decomposition process of DNAZ·HClO₄ has two mass loss stages. The kinetic model function in differential form, the value of apparent activation energy (E _a) and pre-exponential factor (A) of the exothermic decomposition reaction of DNAZ·HClO₄ are f(α) = (1 − α)⁻¹/2, 156.47 kJ mol⁻¹, and 10^15.12 s⁻¹, respectively. The critical temperature of thermal explosion is 188.5 °C. The values of ΔS ^≠, ΔH ^≠, and ΔG ^≠of this reaction are 42.26 J mol⁻¹ K⁻¹, 154.44 kJ mol⁻¹, and 135.42 kJ mol⁻¹, respectively. The specific heat capacity of DNAZ·HClO₄ was determined with a continuous C _p mode of microcalorimeter. Using the relationship between C _p and T and the thermal decomposition parameters, the time of the thermal decomposition from initiation to thermal explosion (adiabatic time-to-explosion) was evaluated as 14.2 s.     

Effects of Light Intensity on the Growth and Lipid Accumulation of Microalga <Emphasis Type="Italic">Scenedesmus</Emphasis> sp. 11-1 Under Nitrogen Limitation

Scenedesmus spp. have been reported as potential microalgal species used for the lipid production. This study investigated the effects of light intensity (at three levels: 50, 250, and 400 μmol photons m⁻² s⁻¹) on the growth and lipid production of Scenedesmus sp. 11-1 under N-limited condition. Carotenoid to chlorophyll ratio was higher when algae 11-1 grew under 250 and 400 μmol photons m⁻² s⁻¹ than that under 50 μmol photons m⁻² s⁻¹, while protein contents was lower. Highest biomass yield (3.88 g L⁻¹), lipid content (41.1 %), and neutral lipid content (32.9 %) were achieved when algae 11-1 grew at 400 μmol photons m⁻² s⁻¹. Lipid production was slight lower at 250 μmol photons m⁻² s⁻¹ level compared to 400 μmol photons m⁻² s⁻¹. The major fatty acids in the neutral lipid of 11-1 were oleic acid (43–52 %), palmitic acid (24–27 %), and linoleic acid (7–11 %). In addition, polyunsaturated fatty acids had a positive correlation with total lipid production, and monounsaturated fatty acids had a negative one.     

The molar formation enthalpy of nano-SiO<Subscript>2</Subscript> with different surface area

Three samples of silicon dioxide were syhthesized and their surface areas were measured. A thermo-chemical cycle was designed to calculate the molar formation enthalpy. The molar formation enthalpy, Δ_f H _m^Φ, for three amorphous silica with the Langmuir surface area 198.0854, 25.1108 and 11.9821 m² g⁻¹ gave −895.52, −910.86 and −915.67 kJ mol⁻¹, respectively. With the increasing surface area, the values of Δ_f H _m^Φ increased accordingly. The results suggest that the silica with larger surface area is more unstable. The wetting heat was also measured by adding the silica powder into water. With the rehydration of the more SiOH groups on the surface, the larger surface areas of silica lead to the more wetting heat. A smaller particle has the more unstable hydroxyl groups and surface energy.     

Low-temperature heat capacities and thermodynamic properties of 2,2-dimethyl-1,3-propanediol

The molar heat capacities C _p,m of 2,2-dimethyl-1,3-propanediol were measured in the temperature range from 78 to 410 K by means of a small sample automated adiabatic calorimeter. A solid-solid and a solid-liquid phase transitions were found at T-314.304 and 402.402 K, respectively, from the experimental C _p-T curve. The molar enthalpies and entropies of these transitions were determined to be 14.78 kJ mol⁻¹, 47.01 J K⁻¹ mol⁻ for the solid-solid transition and 7.518 kJ mol⁻¹, 18.68 J K⁻¹ mol⁻¹ for the solid-liquid transition, respectively. The dependence of heat capacity on the temperature was fitted to the following polynomial equations with least square method. In the temperature range of 80 to 310 K, C _p,m/(J K⁻¹ mol⁻¹)=117.72+58.8022x+3.0964x ²+6.87363x ³−13.922x ⁴+9.8889x ⁵+16.195x ⁶; x=[(T/K)−195]/115. In the temperature range of 325 to 395 K, C _p,m/(J K⁻¹ mol⁻¹)=290.74+22.767x−0.6247x ²−0.8716x ³−4.0159x ⁴−0.2878x ⁵+1.7244x ⁶; x=[(T/K)−360]/35. The thermodynamic functions H _T−H _298.15 and S _T−S _298.15, were derived from the heat capacity data in the temperature range of 80 to 410 K with an interval of 5 K. The thermostability of the compound was further tested by DSC and TG measurements. The results were in agreement with those obtained by adiabatic calorimetry.     

Heat capacity at constant pressure and thermodynamic properties of phase transitions in PbMO<Subscript>3</Subscript> (<Emphasis Type="Italic">M</Emphasis>=Ti,Zr and Hf)

The heat capacity of PbMO₃ (M=Ti, Zr and Hf) at constant pressure was measured using a differential scanning calorimeter (DSC) from room temperature up to 870 K. Large anomalies were found in the heat capacity curves, corresponding to the ferroelectricparaelectric phase transition in PbTiO₃ (PT), the antiferroelectric-paraelectric phase transitions in PbZrO₃ (PZ) and PbHfO₃ (PH). The transition entropies were estimated as 7.3 J K⁻¹ mol⁻¹ (PT), 9.9 J K⁻¹ mol⁻¹ (PZ) and 9.3 J K⁻¹ mol⁻¹ (PH). These values of transition entropies are much larger than that of a typical displacive-type phase transition.     

Kinetics of reactions of chlorine atom/arene complexes withn-heptane

Room temperature rate constants have been determined for reactions ofn-hepatane with Cl/benzene (k=6×10⁷ dm³ mol⁻¹ s⁻¹), Cl/toluene (k=1×10⁷ dm³ mol⁻¹ s⁻¹) and Cl/m-xylene (k=1.7×10⁶ dm³ mol⁻¹ s⁻¹) complexes, respectively, in carbon tetrachloride, using the laser flash photolysis of nitrogen trichloride as a chlorine atom source.     

Thermodynamic properties of Ni-Ga melts

The partial mixing enthalpies of the components (Δ_m $ \bar H $ \bar H _i ) of the Ni-Ga melts were measured using the high-temperature isoperibolic calorimetry at 1770 ± 5 K in wide concentration interval. The limiting partial mixing enthalpy of gallium in a liquid nickel (Δ_m $ \bar H $ \bar H _Ga^∞) is −95.5 ± 19.8 kJ mol⁻¹, and similar function of nickel in liquid gallium (Δ_m $ \bar H $ \bar H _Ni^∞) is −74.5 ± 16.4 kJ mol⁻¹. The integral mixing enthalpy of liquid alloys of this system was calculated from partial enthalpies for the whole concentration area (Δ_m H _min = −32.1 ± 2.7 kJ mol⁻¹ at x _Ni = 0.5). The Δ_m H value of liquid nickel-gallium alloys independence of the temperature is confirmed. Enthalpies of formation of liquid (Δ_m H) phases of Ni-Ga system were compared with ones for solid (Δ_f H) phases of this system. An analysis of d-metals influence on formation energy of Ga-d-Me melts was made using the values of Δ_f H for intermediate phases of these systems. The article was translated by the authors.     

Thermochemistry of copper complex of 6-benzylaminopurine

The copper(II) complex of 6-benzylaminopurine (6-BAP) has been prepared with dihydrated cupric chloride and 6-benzylaminopurine. Infrared spectrum and thermal stabilities of the solid complex have been discussed. The constant-volume combustion energy, Δ_c U, has been determined as −12566.92±6.44 kJ mol⁻¹ by a precise rotating-bomb calorimeter at 298.15 K. From the results and other auxiliary quantities, the standard molar enthalpy of combustion, Δ_c H _m ^θ, and the standard molar of formation of the complex, Δ_f H _m ^θ, were calculated as −12558.24±6.44 and −842.50±6.47 kJ mol⁻¹, respectively.