Spectroscopic properties of trapped electrons on the surface of MgO nanoparticles.

To characterise electron-trapping sites on the surface of MgO nanoparticles, surface colour centres were generated using UV light in conjunction with selected hydrogen-based electron sources. Four different colour-centre species, including the characteristic (e-)(H+) or F(S)+(H) centre, were identified due to the distinct shape of the respective electron paramagnetic resonance (EPR) signals. The analysis of the EPR saturation behaviour down to microwave powers of 5 x 10(-3) mW reveals an enhanced spin-relaxation probability of the (e-)(H+) centre compared to all other F(S)+ centres that do not exhibit significant magnetic interactions with hydroxylic protons. Beside the dipolar magnetic interaction in the (e-)(H+) centre observed by EPR, the electronic interaction between the unpaired electron and the proton of a closely spaced OH group produces a redshift of the OH stretching band by about 70 to 170 cm(-1), as observed by infrared spectroscopy. EPR and IR spectroscopic data obtained after the selective address of individual reaction channels for surface colour-centre formation point to the fact that (e-)(H+) centres are formed by trapping electrons from H atoms. Consequently, the underlying surface defect does not belong to the sites of the MgO surface, which chemisorb hydrogen via a heterolytic splitting process.     

Effect of protons on the optical properties of oxide nanostructures

Site-specific functionalization of oxide nanostructures gives rise to novel optical and chemical surface properties. In addition, it can provide deeper insights into the electronic surface structure of the associated materials. We applied chemisorption of molecular hydrogen, induced by ultraviolet (UV) light, followed by vacuum annealing to MgO nanocubes to selectively decorate three-coordinated oxygen ions (oxygen corner sites, for simplicity) with protons. Fully dehydroxylated nanocubes exhibit 3.2 +/- 0.1 eV photoluminescence induced by 4.6 eV light, where both emission and absorption are associated with three-coordinated oxygen sites. We find that partially hydroxylated nanocubes show an additional photoluminescence feature at 2.9 +/- 0.1 eV. Interestingly, the excitation spectra of the 2.9 and 3.2 eV emission bands, associated with protonated and nonprotonated oxygen corner sites, respectively, nearly coincide and show well-pronounced maxima at 4.6 eV in spite of a significant difference in their local atomic and electronic structures. These observations are explained with the help of ab initio calculations, which reveal that (i) the absorption band at 4.6 eV involves four-coordinated O and Mg ions in the immediate vicinity of the corner sites and (ii) protonation of the three-coordinated oxygen ions eliminates the optical transitions associated with them and strongly red-shifts other optical transitions associated with neighboring atoms. These results demonstrate that the optical absorption bands assigned to topological surface defects are not simply determined by the ions of lowest coordination number but involve contributions due to the neighboring atoms of higher coordination. Thus, we suggest that the absorption band at 4.6 eV should not be regarded as merely a signature of the three-coordinated O2- ions but ought to be assigned to corners as multiatomic topological features. Our results also suggest that optical absorption signatures of protonated and nonprotonated sites of oxide surfaces can be remarkably similar.     

Optical surface properties and morphology of MgO and CaO nanocrystals

Optical absorption and photoluminescence emission properties of dehydroxylated MgO and CaO nanocrystals are discussed with respect to particle morphology and size. On MgO nanocubes with pronounced corner and edge features two emission bands at 3.4 and 3.3 eV result from the excitation of 4-coordinated surface O(4C)(2-) anions in edges at 5.4 eV and of regular oxygen-terminated corners at 4.6 eV, respectively. Morphologically ill-defined CaO particles are a factor of 5 larger, do not display regular corner features, and show only one photoluminescence emission band at 3.0 eV. The associated excitation spectrum indicates electronic excitations above the energy required to excite regular oxygen-terminated CaO corners. It is concluded that in the case of morphologically well-defined MgO nanocubes variations in the next coordination of oxygen-terminated corners can effectively be probed by photoluminescence spectroscopy and thus allows for discrimination between 3-coordinated surface O(2-) in regular corner sites and kinks.     

Paramagnetic defect centers at the MgO surface. An alternative model to oxygen vacancies

On the basis of embedded cluster calculations, we propose a new model for the structure of paramagnetic color centers at the MgO surface usually denoted as F(S)(H)(+) (an electron trapped near an adsorbed proton). These centers are produced by exposing the surface of polycrystalline MgO to H(2) followed by UV irradiation. We demonstrate that properties of H atom absorbed at surface sites such as step edges (MgO(step)) and reverse corner sites (MgO(RC)), formed at the intersection of two step edges, are compatible with a number of features observed for F(S)(H)(+). Our calculations suggest that (i) H(2) dissociates at the reverse corner site heterolytically and that there is no barrier for this exothermic reaction; (ii) the calculated vibrations of the resulting MgO(RC)(H(+))(H(-)) complex are fully consistent with the measured ones; (iii) desorption of a neutral H atom from the diamagnetic precursor requires UV light and leads to the formation of stable neutral paramagnetic centers at the surface, MgO(step)(H(+))(e(-))(trapped) and MgO(RC)(H(+))(e(-))(trapped). The computed isotropic hyperfine coupling constants and optical transitions of these centers are in broad agreement with the existing experimental data. We argue that these centers, which do not belong to the class of "oxygen vacancies", are two of the many possible forms of the F(S)(H)(+) defect center.     

Energy transfer on the MgO surface,monitored by UV-induced H2 chemisorption

Surface anions on edges (4-coordinated = 4C) and on corners (3-coordinated = 3C) of cubic MgO nanoparticles exhibit UV resonance absorptions around 5.5 and 4.6 eV, respectively. After monochromatic excitation of either site the electron paramagnetic resonance (EPR) spectrum exhibits exclusively signal components related to 3-coordinated O- radicals (O-(3C), electron hole centers), which are perfectly bleached by H(2) addition. The disappearance of the O-(3C) EPR signal components is paralleled by a depletion of the UV resonance absorption of the 3-coordinated O(2-) only and the appearance of one single band in the OH stretching region of the IR spectrum. Obviously the sites of UV excitation and subsequent UV induced surface reaction with H(2) are not the same. This may coherently be explained in terms of mobility of the exciton (O(2-)(4C)* or--after ionization--of the corresponding electron hole O-(4C) along the edge where it was created. Finally the mobile state is trapped at a corner site where the O(3C)H group is formed.     

Molecular, supramolecular and solution structures of peroxovanadium complexes with ON and O3N donor set ligands: two new types of cationic-anionic peroxovanadium(V) peroxovanadates(V)

The complexes, [VO(O(2))(pa)(2)]ClO(4).3H(2)O (1), [VO(O(2))(pa)(2)][VO(O(2))(2)(pa)].3H(2)O (2), [VO(O(2))(pa)(2)][VO(O(2))(ada)].2H(2)O (3) and [VO(O(2))(pa)(pca)].H(2)O (4)[pa = picolinamide, ada = carbamoylmethyliminodiacetate(2-) and pca = 2-pyrazinecarboxylate(1-)], were synthesized. 2 and 3 are new types of peroxovanadium complexes: monoperoxovanadium diperoxovanadate (2) and monoperoxovanadium monoperoxovanadate (3). The complexes were characterized by chemical analysis and IR spectroscopy, and 1, 3 and 4 also by X-ray analysis. The structure of 1 is disordered, with alternating positions of the oxo and peroxo ligands. The peroxo oxygen atoms, O(p), in 1 are involved in weak hydrogen bonds with water molecules and close intramolecular C-HO...(p) bonds [d(HO(p)) approximately 2.0 A]. The supramolecular structure of 1 is formed by a network of hydrogen bonds and strong attractive intermolecular pi-pi interactions between the pyridine rings. The supramolecular architecture in 4 is constructed by (N,O)-H...O hydrogen bonds between the neutral complex molecules and water of crystallization. The peroxo oxygen atoms in 4 form intramolecular C-H...O(p) bonds [d(H...O(p))= 2.303 A]. The pa and pca ligands are ON coordinated via the oxygen atoms of the C(NH(2))=O and COO(-) groups, respectively, and nitrogen atoms of the heterocyclic rings, and ada as a tetradentate O(3)N ligand. The thermal analysis of 4 showed that the loss of water of crystallization and the active oxygen release (T(min)/ degrees C 82, T(max)/degrees C 165) are, under given conditions, individual processes separated by the temperature interval 90-132 degrees C. The solution structures and stability were studied by UV-VIS and (51)V NMR spectroscopies.     

Comparative ab initio study of the structures and stabilities of the ethane dication C2H6(2+) and its silicon analogues Si2H6(2+) and CSiH6(2+)

Ab initio MP2/6-311G and QCISD(T)/6-311G levels as well as Gaussian-2 theory were used to perform a comparative study of the structures and stabilities of the ethane dication C(2)H(6)(2+) and its silicon analogues Si(2)H(6)(2+) and CSiH(6)(2+). Similar to previous HF/6-31G results, our present calculations also indicate that the two-electron three-center (2e-3c) bonded carbonium-carbenium structure 1 is more stable than the doubly hydrogen bridged diborane-type structure 2 by about 12 kcal/mol. For the silicon analogue Si(2)H(6)(2+) the calculations, however, indicate that the 2e-3c bonded siliconium-silicenium structure 8 is about 9 kcal/mol less stable than doubly hydrogen bridged structure 9. Similar results were also computed for carbon-silicon mixed CSiH(6)(2+) dication structures. These studies are in agreement with the more electropositive character of silicon compared to carbon. Possible dissociation paths of the minimum structures were also calculated.     

Structure, bonding, electronic and energy aspects of a new family of early lanthanide (La, Ce and Nd) complexes with phosphoric triamides: insights from experimental and DFT studies

A new family of isostructural early lanthanide(III) complexes (LnXPA) of the general formula Ln(XPA)(2)Cl(3)(solv)(2), where Ln = La, Ce and Nd, XPA = (4-X-C(6)H(4)NH)P(O)(NC(4)H(8)O)(2), X = H, F, Cl and Br, and solv = H(2)O and CH(3)OH, is introduced. X-ray crystallography shows that the replacement of the coordinated water by a methanol molecule may reduce the symmetry level of the unit cell from the orthorhombic crystal system and the space group Fdd2 to monoclinic and C2/c. DFT calculations, at B3LYP, PBE and B3PW91 levels, have been carried out to get a better insight into the structural, electronic and energy aspects of the compounds. The large cation attraction energy (-ΔE) values in the range 269-273 kcal mol(-1), at the B3PW91/ECP/6-311+G** level for the model complexes XPA-La(3+) with stoichiometry 1 : 1, represent new ligands XPA as efficient complexant agents for lanthanides. The electronic nature of para substituent X has no significant effect on the Ln-ligand bonding and cation affinity of the ligands XPA. The results of atoms in molecules (AIM) analysis reveal a partial covalent contribution of the Ln-ligand interaction for the models XPA-La(3+) in the absence of counterions and coordinated solvents. In the real complexes LnXPA, a closed-shell Ln-ligand interaction is established. Increasing the charge difference between nitrogen and phosphorus atoms (by ~0.06 e) associated with a weakening of the Lp(O(P))→σ*(P-N) electronic delocalization (Lp(O(P)) being the lone pair of the phosphoryl oxygen atom) may lead to an increase in partial multiple bond character of the P-N bonds in coordinated ligands, agreeing with the increase in ν(P-N) and (2)J(PH) coupling constant values. The changes in electron density (ρ) and electronic energy density (H(r)) values confirm these structural reorganizations upon complexation.     

Probing defect sites on TiO2 with [Re3(CO)12H3]: spectroscopic characterization of the surface species

Samples of the anatase phase of titania were treated under vacuum to create Ti(3+) surface-defect sites and surface O(-) and O(2) (-) species (indicated by electron paramagnetic resonance (EPR) spectra), accompanied by the disappearance of bridging surface OH groups and the formation of terminal Ti(3+)-OH groups (indicated by IR spectra). EPR spectra showed that the probe molecule [Re(3)(CO)(12)H(3)] reacted preferentially with the Ti(3+) sites, forming Ti(4+) sites with OH groups as the [Re(3)(CO)(12)H(3)] was adsorbed. Extended X-ray absorption fine structure (EXAFS) spectra showed that these clusters were deprotonated upon adsorption, with the triangular metal frame remaining intact; EPR spectra demonstrated the simultaneous removal of surface O(-) and O(2) (-) species. The data determined by the three complementary techniques form the basis of a schematic representation of the surface chemistry. According to this picture, during evacuation at 773 K, defect sites are formed on hydroxylated titania as a bridging OH group is removed, forming two neighboring Ti(3+) sites, or, when a Ti(4+)-O bond is cleaved, forming a Ti(3+) site and an O(-) species, with the Ti(4+)-OH group being converted into a Ti(3+)-OH group. When the probe molecule [Re(3)(CO)(12)H(3)] is adsorbed on a titania surface with Ti(3+) defect sites, it reacts preferentially with these sites, becoming deprotonated, removing most of the oxygen radicals, and healing the defect sites.     

Cluster and periodic DFT calculations of MgO/Pd(CO) and MgO/Pd(CO)(2) surface complexes

The bonding and vibrational properties of Pd(CO) and Pd(CO)(2) complexes formed at the (100) surface of MgO have been investigated using the gradient-corrected DFT approach and have been compared to the results of infrared and thermal desorption experiments performed on ultrathin MgO films. Two complementary approaches have been used for the calculation of the electronic properties: the embedded cluster method using localized atomic orbital basis sets and supercell periodic calculations using plane waves. The results show that the two methods provide very similar answers, provided that sufficiently large supercells are used. Various regular and defect adsorption sites for the Pd(CO) and Pd(CO)(2) have been considered: terraces, steps, neutral and charged oxygen vacancies (F and F(+) centers), and divacancies. From the comparison of the computed and experimental results, it is concluded that the most likely site where the Pd atoms are stabilized and where carbonyl complexes are formed are the F(+) centers, paramagnetic defects consisting of a single electron trapped in an anion vacancy.     

Microsolvation of formamide: a rotational study

Microsolvated formamide clusters have been generated in a supersonic jet expansion and characterized using Fourier transform microwave spectroscopy. Three conformers of the monohydrated cluster and one of the dihydrated complex have been observed. Seven monosubstituted isotopic species have been measured for the most stable conformer of formamide...H(2)O, which adopts a closed planar ring structure stabilized by two intermolecular hydrogen bonds (N-H...O(H)-H...O=C). The two higher energy forms of formamide...H(2)O have been observed for the first time. The second most stable conformer is stabilized by a O-H...O=C and a weak C-H...O hydrogen bond, while, in the less stable form, water accepts a hydrogen bond from the anti hydrogen of the amino group. For formamide...(H(2)O)(2), the parent and nine monosubstituted isotopic species have been observed. In this cluster the two water molecules close a cycle with the amide group through three intermolecular hydrogen bonds (N-H...O(H)-H...O(H)-H...O=C), the nonbonded hydrogen atoms of water adopting an up-down configuration. Substitution (r(s)) and effective (r(0)) structures have been determined for formamide, the most stable form of formamide...H(2)O and formamide...(H(2)O)(2). The results on monohydrated formamide clusters can help to explain the observed preferences of bound water in proteins. Clear evidence of sigma-bond cooperativity effects emerges when comparing the structures of the mono- and dihydrated formamide clusters. No detectable structural changes due to pi-bond cooperativity are observed on formamide upon hydration.     

Cyclo- and carbophosphazene-supported ligands for the assembly of heterometallic (Cu2+/Ca2+, Cu2+/Dy3+, Cu2+/Tb3+) complexes: synthesis, structure, and magnetism

The carbophosphazene and cyclophosphazene hydrazides, [{NC(N(CH(3))(2))}(2){NP{N(CH(3))NH(2)}(2)}] (1) and [N(3)P(3)(O(2)C(12)H(8))(2){N(CH(3))NH(2)}(2)] were condensed with o-vanillin to afford the multisite coordination ligands [{NC(N(CH(3))(2))}(2){NP{N(CH(3))N═CH-C(6)H(3)-(o-OH)(m-OCH(3))}(2)}] (2) and [{N(2)P(2)(O(2)C(12)H(8))(2)}{NP{N(CH(3))N═CH-C (6)H(3)-(o-OH)(m-OCH(3))}(2)}] (3), respectively. These ligands were used for the preparation of heterometallic complexes [{NC(N(CH(3))(2))}(2){NP{N(CH(3))N═CH-C(6)H(3)-(o-O)(m-OCH(3))}(2)}{CuCa(NO(3))(2)}] (4), [{NC(N(CH(3))(2))}(2){NP{N(CH(3))N═CH-C(6)H(3)-(o-O)(m-OCH(3))}(2)}{Cu(2)Ca(2)(NO(3))(4)}]·4H(2)O (5), [{NC(N(CH(3))(2))}(2){NP{N(CH(3))N═CH-C(6)H(3)-(o-O)(m-OCH(3))}(2)}{CuDy(NO(3))(4)}]·CH(3)COCH(3) (6), [{NP(O(2)C(12)H(8))}(2){NP{N(CH(3))N═CH-C(6)H(3)-(o-O)(m-OCH(3))}(2)}{CuDy(NO(3))(3)}] (7), and [{NP(O(2)C(12)H(8))}(2){NP{N(CH(3))N═CH-C(6)H(3)-(o-O)(m-OCH(3))}(2)}{CuTb(NO(3))(3)}] (8). The molecular structures of these compounds reveals that the ligands 2 and 3 possess dual coordination pockets which are used to specifically bind the transition metal ion and the alkaline earth/lanthanide metal ion; the Cu(2+)/Ca(2+), Cu(2+)/Tb(3+), and Cu(2+)/Dy(3+) pairs in these compounds are brought together by phenoxide and methoxy oxygen atoms. While 4, 6, 7, and 8 are dinuclear complexes, 5 is a tetranuclear complex. Detailed magnetic properties on 6-8 reveal that these compounds show weak couplings between the magnetic centers and magnetic anisotropy. However, the ac susceptibility experiments did not reveal any out of phase signal suggesting that in these compounds slow relaxation of magnetization is absent above 1.8 K.     

Nanocatalysis on tailored shape supports: Au and Pd nanoparticles supported on MgO nanocubes and ZnO nanobelts

Active gold and palladium nanoparticles supported on MgO nanocubes and ZnO nanobelts and transition-metal-containing MgO nanobelts were synthesized by combining evaporation and deposition-precipitation techniques. The high activity and stability of the Au/CeO2 and Pd/CeO2 nanoparticle catalysts deposited on the MgO cubes are remarkable and imply that a variety of efficient catalysts can be designed and tested using this approach. The significant increase in the concentration of corner and edge sites in MgO nanocubes make them well-defined supports to study the detailed mechanism of the catalytic activity enhancement.     

A double arene hydroxylation mediated by dicopper(II)-hydroperoxide species

The dicopper(II) complex [Cu(2)(L)](4+) (L = alpha,alpha'-bis[bis[2-(1'-methyl-2'-benzimidazolyl)ethyl]amino]-m-xylene) reacts with hydrogen peroxide to give the dicopper(II)-hydroquinone complex in which the xylyl ring of the ligand has undergone a double hydroxylation reaction at ring positions 2 and 5. The dihydroxylated ligand 2,6-bis([bis[2-(3-methyl-1H-benzimidazol-2-yl)ethyl]amino]methyl)benzene-1,4-diol was isolated by decomposition of the product complex. The incorporation of two oxygen atoms from H(2)O(2) into the ligand was confirmed by isotope labeling studies using H(2)(18)O(2). The pathway of the unusual double hydroxylation was investigated by preparing the two isomeric phenolic derivatives of L, namely 3,5-bis([bis[2-(1-methyl-1H-benzimidazol-2-yl)ethyl]amino]methyl)phenol (6) and 2,6-bis([bis[2-(1-methyl-1H-benzimidazol-2-yl)ethyl]amino]methyl)phenol (7), carrying the hydroxyl group in one of the two positions where L is hydroxylated. The dicopper(II) complexes prepared with the new ligands 6 and 7 and containing bridging micro-phenoxo moieties are inactive in the hydroxylation. Though, the dicopper(II) complex 3 derived from 6 and containing a protonated phenol is rapidly hydroxylated by H(2)O(2) and represents the first product formed in the hydroxylation of [Cu(2)(L)](4+). Kinetic studies performed on the reactions of [Cu(2)(L)](4+) and 3 with H(2)O(2) show that the second hydroxylation is faster than the first one at room temperature (0.13 +/- 0.05 s(-1) vs 5.0(+/-0.1) x 10(-3) s(-1)) and both are intramolecular processes. However, the two reactions exhibit different activation parameters (Delta H++ = 39.1 +/- 0.9 kJ mol(-1) and Delta S++ = -115.7 +/- 2.4 J K(-1) mol(-1) for the first hydroxylation; Delta H++ = 77.8 +/- 1.6 kJ mol(-1) and Delta S++ = -14.0 +/- 0.4 J K(-1) mol(-1) for the second hydroxylation). By studying the reaction between [Cu(2)(L)](4+) and H(2)O(2) at low temperature, we were able to characterize the intermediate eta(1):eta(1)-hydroperoxodicopper(II) adduct active in the first hydroxylation step, [Cu(2)(L)(OOH)](3+) [lambda(max) = 342 (epsilon 12,000), 444 (epsilon 1200), and 610 nm (epsilon 800 M(-1)cm(-1)); broad EPR signal in frozen solution indicative of magnetically coupled Cu(II) centers].     

Further evidence for the tetraoxoiodate(V) anion,IO(4)(3-): hydrothermal syntheses and structures of Ba[(MoO(2))(6)(IO(4))(2)O(4)] x H(2)O and Ba(3)[(MoO(2))(2)(IO(6))(2)] x 2H(2)O

The hydrothermal reaction of MoO(3) with BaH(3)IO(6) at 180 degrees C for 3 days results in the formation of Ba[(MoO(2))(6)(IO(4))(2)O(4)] x H(2)O (1). Under similar conditions, the reaction of Ba(OH)(2) x 8H(2)O with MoO(3) and Ba(IO(4))(2) x 6H(2)O yields Ba(3)[(MoO(2))(2)(IO(6))(2)] x 2H(2)O (2). The structure of 1, determined by single-crystal X-ray diffraction, consists of corner- and edge-sharing distorted MoO(6) octahedra that create two-dimensional slabs. Contained within this molybdenum oxide framework are approximately C(2v) tetraoxoiodate(V) anions, IO(4)(3-), that are involved in bonding with five Mo(VI) centers. The two equatorial oxygen atoms of the IO(4)(3-) anion chelate a single Mo(VI) center, whereas the axial atoms are mu(3)-oxo groups and complete the octahedra of four MoO(6) units. The coordination of the tetraoxoiodate(V) anion to these five highly electropositive centers is probably responsible for stabilizing the substantial anionic charge of this anion. The Ba(2+) cations separate the layers from one another and form long ionic contacts with neighboring oxygen atoms and a water molecule. Compound 2 also contains distorted MoO(6) octahedra. However, these solely edge-share with octahedral hexaoxoiodate(VII), IO(6)(5-), anions to form zigzagging one-dimensional, (1)(infinity)[(MoO(2))(IO(6))](3-), chains that are polar. These chains are separated from one another by Ba(2+) cations that are coordinated by additional water molecules. Bond valence sums for the iodine atoms in 1 and 2 are 5.01 and 7.03, respectively. Crystallographic data: 1, monoclinic, space group C2/c, a = 13.584(1) A, b = 7.3977(7) A, c = 20.736(2) A, beta = 108.244(2) degrees, Z = 4; 2, orthorhombic, space group Fdd2, a = 13.356(7) A, b = 45.54(2) A, c = 4.867(3) A, Z = 8.     

Rhenium chemistry of azooximes: oxygen atom transfer, azoimine chelation, and imine-oxime contrast

The concerned azooximes (L1OH, 1) are of type p-X-C6H4C(N2Ph)(NOH) (X = H, Me, Cl). The reaction of [Re(MeCN)Cl3(PPh3)2] with [Ag(L1OH)(L1O)] in cold dichloromethane-acetonitrile solvent has furnished the green colored ionized azoimine complex [ReV(O)Cl(PPh3)2(L1)](PF6), 2. In effect L1O- has undergone oxidative addition, the oxygen atom being transferred to the metal site. Upon treatment of [ReV(NPh)Cl3(PPh3)2] with L1OH in solution, the neutral azoimine complex [ReV(NPh)Cl3(L1H)], 3, resulted due to the spontaneous transfer of the oxime oxygen atom to a PPh3 ligand, which is eliminated as OPPh3. In contrast, the oxime of 2-acetylpyridine (L2OH, 4) did not undergo oxygen atom transfer and simply afforded the imine-oxime complex [ReV(NC6H4Y)Cl2(PPh3)(L2O)], 5, upon reacting with [ReV(NC6H4Y)Cl3(PPh3)2] (Y = H, Me, Cl). The spectral and electrochemical properties of 2, 3, and 5 and the structures of three representative compounds are reported. In the cation of 2 (X = H) the two PPh3 ligands lie trans to each other and the equatorial plane is defined by the five-membered azoimine chelate ring and the oxo and chloro ligands. The oxo ligand which forms a model triple bond (Re-O length 1.616(6) A) lies cis to the imine-N atom. In 3 (X = Cl) the ReCl3 fragment has meridional geometry and the imido nitrogen lies trans to the imine nitrogen of the planar azoimine chelate ring. In 5 x H2O (Y = Me), the Cl, oximato-N, and P atoms define an equatorial plane and the pyridine-N lies trans to the imido-N. The water of crystallization is hydrogen bonded to the oximato oxygen atom (O...O, 2.829(5) A). Reaction models in which chelation of the azooxime precedes oxygen atom transfer are proposed on the basis of oxophilicity of trivalent rhenium, Lewis acid activity of pentavalent rhenium, electron withdrawal by the azo group, and observed relative disposition of ligands in products.     

Thermodynamic, kinetic and solid-state study of divalent metal complexes of 1,4,8,11-tetraazacyclotetradecane (cyclam) bearing two trans (1,8-)methylphosphonic acid pendant arms

Divalent metal complexes of macrocyclic ligand 1,4,8,11-tetraazacyclotetradecane-1,8-bis(methylphosphonic acid)) (1,8-H4te2p, H4L) were investigated in solution and in the solid state. The majority of transition-metal ions form thermodynamically very stable complexes as a consequence of high affinity for the nitrogen atoms of the ring. On the other hand, complexes with Mn2+, Pb2+ and alkaline earth ions interacting mainly with phosphonate oxygen atoms are much weaker than those of transition-metal ions and are formed only at higher pH. The same tendency is seen in the solid state. Zinc(II) ion in the octahedral trans-O,O-[Zn(H2L)] complex is fully encapsulated within the macrocycle (N4O2 coordination mode with protonated phosphonate oxygen atoms). The polymeric {[Pb(H2L)(H2O)2].6H2O}n complex has double-protonated secondary amino groups and the central atom is bound only to the phosphonate oxygen atoms. The phosphonate moieties bridge lead atoms creating a 3D-polymeric network. The [{(H2O)5Mn}2(micro-H2L)](H2L).21H2O complex contains two pentaaquamanganese(II) moieties bridged by a ligand molecule protonated on two nitrogen atoms. In the complex cation, oxygen atoms of the phosphonate groups on the opposite sites of the ring occupy one coordination site of each metal ion. The second ligand molecule is diprotonated and balances the positive charge of the complex cation. Complexation of zinc(II) and cadmium(II) by the ligand shows large differences in reactivity of differently protonated ligand species similarly to other cyclam-like complexes. Acid-assisted dissociations of metal(II) complexes occur predominantly through triprotonated species [M(H3L)]+ and take place at pH < 5 (Zn2+) and pH < 6 (Cd2+).     

MgO缺陷和不规则表面吸附Cl2的电子结构研究

采用从头算程序对MgO表面 3种不同配位位置吸附Cl2 的构型进行优化 ,并用扩展休克尔紧束缚 (EHT)晶体轨道方法对MgO的缺陷和不规则表面吸附Cl2的可能构型进行能带计算 ,讨论了吸附前后能带组成和成键性质的变化。研究表明 :MgO表面吸附Cl2 将更趋向于吸附在O原子上而非Mg原子上 ,而且在 3种配位中MgO表面三配位氧最有利于吸附Cl2 ;吸附时 ,电子从O原子转移到Cl2 分子的反键轨道 ,但是各种吸附构型的MgO表面对Cl2 的吸附作用均比较微弱 ,是典型的物理吸附。     

Density-functional model cluster studies of EPR g tensors of Fs+ centers on the surface of MgO

We report g tensors of surface color centers, so-called F(s) (+) centers, of MgO calculated with two density-functional approaches using accurately embedded cluster models. In line with recent UHV measurements on single-crystalline MgO film, we determined only small g-tensor anisotropies and negative shifts Deltag identical with g-g(e) for all F(s) (+) sites considered, namely, (001)-terrace, step, edge, and corner sites. The g values are very sensitive to the local structure of the defect: relaxation reverses the sign of Deltag. However, accounting for the spin-orbit interaction either self-consistently or perturbatively yields very similar results. In addition to the values of the tensor components, their direction with respect to the surface was determined. In contrast to edges, significant deviations from ideal C(2v) symmetry were found for F(s) (+) centers at steps. Recent data on single-crystalline thin films are reevaluated in the light of these results.     

Steric effects on uranyl complexation: synthetic, structural, and theoretical studies of carbamoyl pyrazole compounds of the uranyl(VI) ion

New bifunctional pyrazole based ligands of the type [C(3)HR(2)N(2)CONR'] (where R = H or CH(3); R' = CH(3), C(2)H(5), or (i)C(3)H(7)) were prepared and characterized. The coordination chemistry of these ligands with uranyl nitrate and uranyl bis(dibenzoyl methanate) was studied with infrared (IR), (1)H NMR, electrospray-mass spectrometry (ES-MS), elemental analysis, and single crystal X-ray diffraction methods. The structure of compound [UO(2)(NO(3))(2)(C(3)H(3)N(2)CON{C(2)H(5)}(2))] (2) shows that the uranium(VI) ion is surrounded by one nitrogen atom and seven oxygen atoms in a hexagonal bipyramidal geometry with the ligand acting as a bidentate chelating ligand and bonds through both the carbamoyl oxygen and pyrazolyl nitrogen atoms. In the structure of [UO(2)(NO(3))(2)(H(2)O)(2)(C(5)H(7)N(2)CON {C(2)H(5)}(2))(2)], (5) the pyrazole ligand acts as a second sphere ligand and hydrogen bonds to the water molecules through carbamoyl oxygen and pyrazolyl nitrogen atoms. The structure of [UO(2)(DBM)(2)C(3)H(3)N(2)CON{C(2)H(5)}(2)] (8) (where DBM = C(6)H(5)COCHCOC(6)H(5)) shows that the pyrazole ligand acts as a monodentate ligand and bonds through the carbamoyl oxygen to the uranyl group. The ES-MS spectra of 2 and 8 show that the ligand is similarly bonded to the metal ion in solution. Ab initio quantum chemical studies show that the steric effect plays the key role in complexation behavior.