柱体流激振动能量俘获理论与技术研究若干进展

潮流能分布广泛,且储量巨大,具备巨大的规模化开发利用价值.流激振动是一种常见的流固耦合现象,通过柱体流激振动能够在流速较低时实现有效的能量转换,基于柱体流激振动的能量俘获技术在未来具备广阔的工程应用前景.近年来,针对柱体结构流激振动特性和能量俘获性能,出现了大量的实验和数值仿真研究工作.文章全面阐述了多种截面形式的单个柱体、柱群结构流激振动能量俘获理论与技术方面的研究进展:对于单个圆柱流激振动能量俘获,目前已基本揭示了被动湍流控制器参数、系统阻尼、雷诺数和边界条件等因素对能量俘获性能的影响规律,基本完成了理论和技术积累;对于非圆截面柱体流激振动能量俘获,已初步明确特定来流攻角、系统质量比、系统阻尼、系统刚度和雷诺数条件下三角形、四边形、多边形与异形等多种截面形式柱体的流激振动作用机理和能量俘获能力;对于柱群的流激振动能量俘获,各柱体振子之间存在流场干涉,需要合理设计柱体排布形式、柱体间距和系统阻尼等参数,实现流体能量俘获最大化.通过综述国内外流激振动能量俘获理论和技术方面的研究进展,对今后该问题的研究进行了力所能及的展望,期望促进流激振动能量俘获理论的发展和流激振动能量转换装置的工程应...     

倾斜圆柱结构涡激振动研究进展

圆柱结构涡激振动现象在生活中十分常见, 如海洋工程中的管道、土木工程中的高耸建筑、桥梁斜拉索, 核工程中的热交换器等频繁受到涡激振动影响, 诱发结构的疲劳损伤, 甚至破坏失效. 现阶段, 人们对垂直来流作用下圆柱结构涡激振动机理已有较为全面的认识. 然而, 当圆柱倾斜置于流场中, 结构后缘的尾流形态与垂直放置差异显著, 结构与流体的耦合作用机理更为复杂. 为简化倾斜圆柱涡激振动问题, 提出了不相关原则, 来流速度被分解为垂直圆柱结构轴向和平行圆柱结构轴向的两个速度分量, 仅考虑垂直结构轴向速度分量的影响, 忽略平行结构轴向速度分量的影响. 近年来, 针对倾斜圆柱涡激振动及不相关原则的适用性, 出现了大量实验和数值模拟研究成果. 为了深化对倾斜圆柱结构涡激振动相关机理的认知, 本文全面阐述了倾斜圆柱结构涡激振动响应规律、尾迹流场模式和流体力特性等方面的研究进展, 分析了不相关原则的适用范围, 探讨了倾斜圆柱结构涡激振动抑制措施, 并对今后该领域的研究进行了力所能及的展望.      

柔性圆柱涡激振动流体力系数识别及其特性

涡激振动是诱发海洋立管、浮式平台系泊缆和海底悬跨管道等柔性圆柱结构疲劳损伤的重要因素.目前,海洋工程中用于柔性圆柱涡激振动预报的流体力系数主要来源刚性圆柱横流向受迫振动的实验数据,存在一定缺陷和误差.本文综合考虑横流向与顺流向振动耦合作用,建立了柔性圆柱涡激振动流体力模型,运用有限元法和最小二乘法确定升力系数、脉动阻力系数和附加质量系数.为了准确识别柔性圆柱涡激振动流体力系数,设计并开展了拖曳水池模型实验,实验用柔性圆柱模型的质量比为1.82,长径比为195.5.通过与刚性圆柱流体力系数对比,深入分析了柔性圆柱流体力系数的特性.结果表明:柔性圆柱在一阶模态控制区,流体力系数随约化速度变化趋势与刚性圆柱大致相似;二阶模态控制区,升力系数和脉动阻力系数显著增大;附加质量系数在响应频率较低时与振动位移的相关性增强;当响应频率较低时,振动位移较大区域为能量耗散区,当响应频率较高时,振动位移较大区域为能量输入区.     

海洋柔性结构涡激振动的流固耦合机理和响应

对近几十年来国内外在涡激振动的基础研究包括机理认识和动响应分析等方面的进展进行了论述,尤其针对海洋油气平台中的立管、隔水管等细长柔性结构的涡激振动.描述了涡激振动这种典型的非线性流固耦合现象所具有的特征,包括自激、自限制、展向相关、尾迹水动力与结构动力的流固耦合等及其主要影响参数.介绍了目前常用的结构响应预测方法和相关实验.通过讨论当前理论研究和实际工程中的热点问题,诸如多模态宽带振动、浮体运动与水下立管的耦合、响应抑制措施、双向振动、高雷诺数下的大尺度物理实验等,对今后该领域的研究方向进行了力所能及的展望.     

不同控制角下附加圆柱对圆柱涡激振动影响

在弹性支撑的圆柱周围布置直径更小圆柱会影响剪切层发展以及旋涡脱落,进而改变其涡激振动状态.通过不同的布置形式和附加小圆柱个数可以实现对圆柱涡激振动的促进或抑制.激励更大幅值的振动可以更好地将水流动能转化为可利用的机械能或电能,抑制其振动则可以实现对海洋平台等结构物的保护.采用基于迭代的嵌入式浸入边界法对前侧对称布置两个小圆柱的圆柱涡激振动进行数值模拟研究,系统仅做横向振动,其中基于主圆柱直径的雷诺数为100,质量比为2.0,折合流速为3~11.小圆柱与主圆柱的直径比为0.125,间隙比为0.125.结果表明,在研究的控制角范围内(30°~90°),附加小圆柱可以很大程度上改变圆柱涡激振动的状态.当控制角较小(30°)时,附加小圆柱对主圆柱的振动起抑制作用;当控制角为45°~60°时,圆柱的振动分为涡振和弛振两个阶段,在弛振阶段,圆柱振幅随折合流速增加而持续增加;当控制角较大(75°~90°)时,附加小圆柱的促进作用随着控制角增加而减小.进一步地,结合一个周期内不同时刻旋涡脱落以及圆周压强分布,解释了附加小圆柱对主圆柱涡激振动的作用机制.应用能量系数对圆柱系统的进一步分析发现,弛振阶段由流体传递到主圆柱的能量系数随折合流速的增加逐渐下降,旋涡结构的改变是产生这种变化的直接原因.      

不同控制角下附加圆柱对圆柱涡激振动影响

在弹性支撑的圆柱周围布置直径更小圆柱会影响剪切层发展以及旋涡脱落,进而改变其涡激振动状态.通过不同的布置形式和附加小圆柱个数可以实现对圆柱涡激振动的促进或抑制.激励更大幅值的振动可以更好地将水流动能转化为可利用的机械能或电能,抑制其振动则可以实现对海洋平台等结构物的保护.采用基于迭代的嵌入式浸入边界法对前侧对称布置两个小圆柱的圆柱涡激振动进行数值模拟研究,系统仅做横向振动,其中基于主圆柱直径的雷诺数为100,质量比为2.0,折合流速为3～11.小圆柱与主圆柱的直径比为0.125,间隙比为0.125.结果表明,在研究的控制角范围内(30°～90°),附加小圆柱可以很大程度上改变圆柱涡激振动的状态.当控制角较小(30°)时,附加小圆柱对主圆柱的振动起抑制作用;当控制角为45°～60°时,圆柱的振动分为涡振和弛振两个阶段,在弛振阶段,圆柱振幅随折合流速增加而持续增加;当控制角较大(75°～90°)时,附加小圆柱的促进作用随着控制角增加而减小.进一步地,结合一个周期内不同时刻旋涡脱落以及圆周压强分布,解释了附加小圆柱对主圆柱涡激振动的作用机制.应用能量系数对圆柱系统的进一步分析发现,弛振阶段由流体传递到主圆柱的能量系数随折合流速的增加逐渐下降,旋涡结构的改变是产生这种变化的直接原因.     

海洋柔性结构涡激振动的流固耦合机理和响应

对近几十年来国内外在涡激振动的基础研究包括机理认识和动响应分析等方面的进展进行了论述,尤其针对海洋油气平台中的立管、隔水管等细长柔性结构的涡激振动.描述了涡激振动这种典型的非线性流固耦合现象所具有的特征,包括自激、自限制、展向相关、尾迹水动力与结构动力的流固耦合等及其主要影响参数.介绍了目前常用的结构响应预测方法和相关实验.通过讨论当前理论研究和实际工程中的热点问题,诸如多模态宽带振动、浮体运动与水下立管的耦合、响应抑制措施、双向振动、高雷诺数下的大尺度物理实验等,对今后该领域的研究方向进行了力所能及的展望.     

Fluid-solid coupling and dynamic response of vortex-induced vibration of slender ocean cylinders

对近几十年来国内外在涡激振动的基础研究包括机理认识和动响应分析等方面的进展进行了论述,尤其针对海洋油气平台中的立管、隔水管等细长柔性结构的涡激振动.描述了涡激振动这种典型的非线性流固耦合现象所具有的特征,包括自激、自限制、展向相关、尾迹水动力与结构动力的流固耦合等及其主要影响参数.介绍了目前常用的结构响应预测方法和相关实验.通过讨论当前理论研究和实际工程中的热点问题,诸如多模态宽带振动、浮体运动与水下立管的耦合、响应抑制措施、双向振动、高雷诺数下的大尺度物理实验等,对今后该领域的研究方向进行了力所能及的展望.     

深海细长柔性立管涡激振动数值分析方法研究进展

深海细长柔性立管的涡激振动与刚性圆柱的涡激振动问题相比,既有联系又有区别.当立管的长细比(L/D)较大时,会展现出一些刚性圆柱涡激振动没有的现象.本文介绍了近几十年来深海开发的细长柔性立管涡激振动的研究进展,主要侧重于数值计算分析研究领域,对目前常用的数值分析方法进行了归纳和总结.在此基础之上,详细介绍了目前理论研究和实际工程中的热点问题,诸如流场剖面的影响、立管顶端浮体运动的耦合、涡激振动抑制措施、振动多模态特性等.     

低雷诺数下串列布置双圆柱涡激振动特性研究

基于四步半隐式特征线分裂算子有限元方法,对串列布置双圆柱双自由度涡激振动问题进行了数值模拟计算,并分析了间距比、剪切率、频率比以及折减速度4个参数对圆柱结构动力响应的影响.研究发现:不同固有频率比与剪切率对下游圆柱振动幅值影响较大,然而对上游圆柱振动幅值影响较小.上游圆柱在两个自由度方向达到最大值的折减速度不同,然而下...     

低雷诺数下弹性圆柱体涡激振动及影响参数分析

利用Fluent软件数值求解不可压缩粘性流体的N-S方程,研究均匀来流Re=200时弹性圆柱体的涡激振动.圆柱体运动简化为质量-弹簧-阻尼系统,将Newmark-β方法代码写入用户自定义函数(UDF)求解运动方程,柱体与流体间的非线性耦合作用通过动网格技术实现.详细分析了涡激力系数、柱体位移特征值和尾流涡结构随频率比的变化关系,获得"相位开关"、"拍"等现象.考虑流向振动对横向振动影响时,圆柱体最大横向振幅为0.65倍直径.当固定频率比,而质量比或折合阻尼增大时,圆柱体流向与横向振动均呈非线性衰减趋势,但增大质量比对流向平均位移的偏离起到更好的控制效果.     

Theoretical and experimental studies on the aerodynamic instability of a two-dimensional circular cylinder with a moving attachment

Rain–wind induced vibration of cables in cable-stayed bridges is a worldwide problem of great concern. The effect of the motion of water rivulets on the instability of stay cables has been recognized as one of the mechanisms of this complex phenomenon. In order to investigate how the motion of rivulets affects the unstable vibration of cables without considering the effects of axial flow and axial vortex, a real three-dimensional cable was modeled as a two-dimensional circular cylinder, around which an attachment representing the rivulet can move. This could also be regarded as a new kind of two-dimensional 2-dof dynamic system. This paper studies the aerodynamic instability of the system theoretically and experimentally. Equations governing the motions of the cylinder and the attachment are first established. The Lyapunov stability criterion is applied to the equations of motion to derive the criterion for the unstable balance angle of the attachment. Moreover, a new two-dimensional 2-dof cable model system with a movable attachment is designed and tested in a wind tunnel. Parametric studies are carried out to investigate the effects of major factors such as wind speed, frequency and damping of the dynamic system on the unstable balance angle of the rivulet attachment. Theoretical and experimental results match well. These results may be valuable in elucidating the mechanism of rain–wind induced vibration of stay cables.     

圆柱体双自由度涡激振动轨迹的模型试验

对水平放置的直径 5cm,长120cm的圆柱体开展了双自由度涡激振动模型试验研究. 试验中发现,圆柱体在顺流向上的振动频率表现为"多频"的现象,即不光有2倍横向振动的频率,在某些振动固有频率和约化速度的条件下,还出现了单倍横向振动的频率,从而使圆柱体的轨迹呈现出"卵"形以及"雨滴"形等明显异于传统"8"字形与"新月"形的运动轨迹. 此外,通过研究初步得到了各种其他形式的振动轨迹向"8"字形变化的趋势,并认为不同的横向、顺流向振动固有频率以及流速是导致圆柱体涡激振动轨迹产生多种形式的主要原因.      

Implementation of active control on flexibly mounted pipe exposed to vortex induced vibration using rotating rod

This paper presents the experimental works on the active control implementation of a flexibly mounted cylinder exhibiting vortex induced vibration phenomena. The dynamic response of the system was initially studied by fixing single and double passive control rods to the main cylinder. It was found that the fixed control rod could not suppress the vibration for both cases. In fact, the vibration was amplified as compared with the bare cylinder response. By retaining the same position, an active open loop control strategy was introduced to the vibrating system by rotating the single control rod in clockwise and counter clockwise directions. The results indicated that the counter clockwise direction has suppressed the vibration up to 29.81 dB. Further investigation was made by studying the performance of the control rod at several speeds in a single reduced speed of 4.29. It was found that the maximum attenuation level of 19.56 dB was attained based on 1676 RPM of control rod rotating speed. In addition, an overview of attenuation level trends at both varying control speed and reduced speed were presented in this study. Through the experimental implementation of control strategies conducted in this research, it was found that the active control strategy has performed well as suppression strategy at ineffective fixed control rod position.     

The ‘void’ structure in the wake of a self-oscillating flexible circular cylinder

We discuss the experimental vortex wake of a flexible circular cylinder undergoing vortex-induced vibration at low Reynolds number and a large cylinder aspect ratio. Hydrogen bubbles formed on the cylinder track the von Karman vortex cores. They show a characteristic ‘void’ structure. We propose a vortex skeleton model that includes a pinch-off of opposite-signed cores. Voids occurred at a node in streamwise vibration when close to an antinode in transverse cylinder vibration. A vibration model predicts the ratio of shedding frequency to natural cylinder vibration frequency necessary for void formation at specific spanwise locations.     

基于非线性吸能机理的涡激振动减振理论与实验研究

流致振动现象广泛存在于机械、航空、土木和石油等重要工程领域, 为防止工程结构因流致振动行为而造成疲劳破坏, 有必要对稳定性、动力学响应及其振动控制做深入研究. 本文提出了一种由弹簧和质量块构成的非线性吸能器(nonlinear targeted energy transfer, NTET), 研究了该非线性吸能器对弹性支承圆柱体涡激振动的被动控制影响机制. 基于能量法推导了圆柱体涡激振动非线性被动控制的耦合动力学方程, 通过设计非线性弹簧?质量块构型的NTET, 进一步开展了涡激振动控制的实验研究, 并与理论预测结果进行了较好的对比, 获得提升涡激振动控制效果的最佳参数值. 研究发现, NTET的质量、弹簧刚度以及弹簧预应力等参数会对涡激振动控制效果产生显著的影响. 本文研究结果表明, 该耦合系统中圆柱体和NTET均表现出周期性的稳态振动响应, NTET质量的改变会显著影响系统的耦合频率. 在无预应力状态下, NTET质量越大、刚度越小时, 有更好的减振效果. 当弹簧预应力逐渐增大时, NTET的非线性刚度逐渐变弱, 会降低涡激振动控制性能. 参数分析表明: 随着涡激振动控制性能的提升, 圆柱体的振幅逐渐较小, NTET的振幅逐渐增大, 能量传递效率逐渐提高. 研究结果可为工程中涡激振动控制策略的高效设计提供有用的理论支撑和实验数据.      

Passive control of vortex induced vibration in internal flow using body shape

We present a concept for passive control of vortex induced vibration (VIV) that uses the body shape of a prismatic body as the control parameter in 2D internal flow. We consider that the Reynolds number based on the prism cross section height is 200 and that the blockage ratio of the channel is 2.5. The working fluid is water and the solid-to-fluid density ratio is 1, so that the prism presents neutral buoyancy and the body shape parameter γ acts as the only control parameter. Two very different fluid dynamics regimes are observed depending on γ with an abrupt transition between them for γ=γ_c, where γ_c represents a critical value obtained numerically. For γ<γ_c the cylinder oscillation is controlled by vortex shedding and represents a typical case of vortex induced vibration. For γ>γ_c the oscillation is a mixture of galloping and vortex induced vibration that causes the prism motion to shift from a stable periodic motion to a highly irregular pattern. The physical explanation for the change of regime is given based on the cylinder equation of motion.     

Roughness and turbulence intensity effects on the induced flow oscillation of a single cylinder

The effects of the surface roughness and the turbulence intensity on the dynamic characteristics of the flow induced oscillations of an elastically supported single circular cylinder in a cross flow in the vortex shedding and fluid elastic regions were experimentally investigated. The results of these experiments indicate that, for the vortex shedding region, increasing the surface roughness results in a reduction of the amplitude of oscillation, while in the fluid elastic region, increasing the surface roughness tends to enhance the oscillations. A similar trend for the dynamic response of the cylinder in the vortex shedding region was also observed when the free stream turbulence intensity was varied, while in the fluid elastic region variations in the free stream turbulence intensity were observed to have no drastic effect on the dynamic response of the cylinder.     

Roughness and turbulence intensity effects on the induced flow oscillation of a single cylinder

The effects of the surface roughness and the turbulence intensity on the dynamic characteristics of the flow induced oscillations of an elastically supported single circular cylinder in a cross flow in the vortex shedding and fluid elastic regions were experimentally investigated. The results of these experiments indicate that, for the vortex shedding region, increasing the surface roughness results in a reduction of the amplitude of oscillation, while in the fluid elastic region, increasing the surface roughness tends to enhance the oscillations. A similar trend for the dynamic response of the cylinder in the vortex shedding region was also observed when the free stream turbulence intensity was varied, while in the fluid elastic region variations in the free stream turbulence intensity were observed to have no drastic effect on the dynamic response of the cylinder.