The Partial Molar Heat Capacities and Expansions of Inosine, 2′-Deoxyinosine and 2′-Deoxyguanosine in Aqueous Solution at 298.15 K

Solution densities over the temperature range 288.15 to 313.15 K have been measured for aqueous solutions of the nucleosides inosine, 2′-deoxyinosine, and 2′-deoxyguanosine, from which the partial molar volumes of the solutes at infinite dilution, V ₂^o, were obtained. The partial molar expansions for the nucleosides at infinite dilution and 298.15 K, E ₂^o {E ₂^o=(∂ V ₂^o/∂ T) _p }, were derived from the V ₂^o results. The V ₂^o values at 298.15 K for the two sugars D-ribose and 2-deoxyribose also have been determined. The partial molar heat capacities at infinite dilution for all the solutes, C _p,2^o, have been determined at 298.15 K. These V ₂^o,E ₂^o, and C _p,2^o results are critically compared with all of the results available from the literature, and the use of group additivity to evaluate these solution thermodynamic properties for the sparingly soluble nucleoside guanosine is explored.     

One-Pot Reduction of Sulfoxides with NaBH4, CoCl2 · 6H2O Catalyst,and Moist Alumina

Sulfoxides are reduced by a combination of sodium borohydride, a catalytic amount of cobalt(II) chloride hexahydrate, and chromatographic neutral alumina preloaded with a small amount of water (moist alumina) in hexane to produce the corresponding sulfides in good to excellent yields under mild conditions. An interesting structural influence of sulfoxides on their reactivity is observed.

Ultrasonic Velocities,Densities, and Refractive Indices of Binary Mixtures of Polyethylene Glycol 250 Dimethyl Ether with 1-Propanol and with 1-Butanol

Measurements of the ultrasonic velocity (u), density (ρ) and refractive index (n) for binary mixtures of polyethylene glycol 250 dimethyl ether with 1-propanol and 1-butanol have been made at three temperatures (T=293, 303 and 31 K) over the entire composition range in order to investigate the nature of intermolecular interactions between the components of these liquid mixtures. Various excess thermodynamic properties such as the excess ultrasonic velocity (Δu), deviation in isentropic compressibility (Δk _S ), excess intermolecular free length (L_f^E)(L_{\mathrm{f}}^{\mathrm{E}}), excess acoustic impedance (Z ^E), excess pseudo-Grüneisen parameter (Γ ^E), and molar refraction deviation (ΔR _m) were calculated using experimental values of the ultrasonic velocity, density and refractive index and were then represented with the Redlich-Kister polynomial equation. The observed excess deviation parameter values were explained on the basis of the strength of intermolecular interactions between the components of the mixtures. Estimations of the refractive index and ultrasonic velocity have also been made using various empirical relations and are discussed in terms of the average percentage deviations (APD).     

Adsorption properties and photocatalytic activity of TiO2 and La-doped TiO2

Photocatalysts of TiO₂ and La-doped TiO₂ were prepared by calcining the pure TiO₂ sols and the sols mixed with La(NO₃)₃⋅6H₂O at 873 K, respectively. These photocatalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and N₂ adsorption-desorption isotherms measurement. As results, the BET surface area, pore diameter, mesopore volume and micropore volume slightly increased, while the crystallite size and the phase structure were little affected by lanthanum doping. The equilibrium adsorption of methylene blue (MB) on the photocatalysts were measured in a dark room. The adsorption isotherms were confirmed to fit to the Langmuir theory. Photocatalytic activities of the photocatalysts were studied by employing the photocatalytic degradation of MB in water and degradation of acetaldehyde in air under UV-irradiation using a black light. Kinetic analysis revealed that the rate controlling steps could be the surface reaction of the adsorbed MB on the catalyst surface for MB degradation and the reaction of adsorbed acetaldehyde with the gaseous acetaldehyde for degradation of acetaldehyde, respectively.     

Adsorption isotherms of CO2, CO,N2, CH4, Ar and H2 on activated carbon and zeolite LiX up to 1.0 MPa

The adsorption isotherms of CO₂, CO, N₂, CH₄, Ar, and H₂ on activated carbon and zeolite LiX were measured using a volumetric method. Equilibrium experiments were conducted at 293, 308, and 323 K and pressures up to 1.0 MPa. The adsorption isotherm and heat of adsorption were analyzed for two pressure regions of experimental data: pressures up to 0.1 MPa and up to 1.0 MPa. Each experimental isotherm was correlated by the Langmuir, Sips, Toth and temperature dependent Sips isotherm models, and the deviation of each model was evaluated. The Sips and Toth models showed smaller deviation from the experimental data of adsorbents than the Langmuir model. Isosteric heats of adsorption were calculated by the temperature dependent Sips model and are presented along with surface loading. From deviation analysis, it is recommended that the isotherm in the proper pressure range be used to appropriately design adsorptive processes.     

Stability and Coordination Mode of Complexes of Polyphosphates and Polymetaphosphates with Copper(II) Ions in Aqueous Solution—Potentiometric,Spectral and Theoretical Studies

Complexes of copper(II) with a number of polyphosphate and polymetaphosphate anions have been studied in aqueous solutions by potentiometric, spectroscopic and theoretical methods. Stability constants of the complexes have been determined as well as their coordination modes. Results of the equilibrium studies provided evidence for the formation of ML, MHL and ML(OH) _x type complexes with the ligands studied. The length of the polyphosphate chain was found to affect the oxygen atom charge that is reflected in the stability constants of the ML type complexes. Moreover, the stability of the complex is also influenced by the spatial arrangement of the phosphate groups in phosphates and metaphosphates. The spectral parameters observed for certain complexes have permitted us to deduce the inner coordination sphere of the studied complexes.     

Decomposition of Toluene in a Plasma Catalysis System with NiO, MnO2, CeO2, Fe2O3, and CuO Catalysts

The performance of NiO, MnO₂, CeO₂, Fe₂O₃, and CuO catalysts on alumina in removing toluene from a gas stream was studied in a plasma catalysis system. The NiO catalyst performed better than the other catalysts, generating more toluene-destroying oxygen species by decomposing ozone. The optimum nickel loading in the NiO/γ-Al₂O₃ catalyst was approximately 5 wt%, close to the monolayer dispersion threshold of NiO on γ-Al₂O₃. The presence of water vapor had a negative effect on catalytic performance due to its quenching of high speed electrons and its competition with toluene for adsorption sites. Water vapor also reduced the outlet ozone concentration by inhibiting the production of key intermediate in the ozone formation process.     

Synthesis, Solution Equilibria and Antibacterial Activity of Co(II) with 2-(Aminomethyl)-Benzimidazole and Dicarboxylic Acids

Formation equilibria of cobalt(II) complexes of 2-(aminomethyl)-benzimidazole (AMBI) and the ternary complexes Co(AMBI)L (L = aliphatic or aromatic dicarboxylic acids) were investigated in aqueous solutions at 25?°C and 0.1 mol?dm^?3 ionic strength. Stoichiometry and stability constants are reported for the complexes formed. The speciation of the complexes was resolved. Values of $\log_{10}\ (K_{\mathrm{Co(AMBI)L}}^{\mathrm{Co(AMBI)}})$ and Δlog?₁₀ K are calculated and discussed. The effect of chelate ring size of the dicarboxylic acid complexes on their stability constants was examined. The effect of temperature on the dissociation constant of AMBI, CBDCA, and the formation constant of Co(AMBI) and Co(AMBI)-CBDCA complexes was studied and the thermodynamic parameters were calculated. Formation of the metal complexes has been found to be spontaneous, exothermic and entropically favorable. The solid complexes of [Co(AMBI)L] (L = oxalic acid, 1,1-cyclobutanedicarboxylic acid (CBDCAH₂) and malonic acid) have been synthesized and characterized by elemental analysis, infrared, spectra, magnetic and conductance measurements. Electronic spectra and μ _eff values suggest a tetrahedral geometry for Co(II)-complexes. The isolated metal chelates have been screened for their antibacterial activities and the complexes show a significant antibacterial activity against Pseudomonas fluorescence (Gram ?ve) and Bacillus subtilis (Gram +ve). The activity increases at higher concentration of the compounds.     

Prednisone/Cyclodextrin Inclusion Complexation: Phase Solubility,Thermodynamic, Physicochemical and Computational Analysis

Guest–host interaction of prednisone (PN) with cyclodextrins (CDs) have been investigated using phase solubility diagrams (PSD), differential scanning calorimetry (DSC), X-ray powder diffractometry (XRPD), scanning electron microscopy (SEM) and molecular mechanical modeling (MM). Estimates of the complex formation constant (K ₁₁) show that the tendency of PN to complex with CDs follows the order: β-CD>γ-CD>HP-β-CD>α-CD. At the same pH of 7.0, β-CD forms soluble 1:1 and insoluble 1:2 PN/CD complexes (B_S-type PSDs). The thermodynamic functions for 1:1 PN/β-CD estimated at pH = 7.0 (ΔG ₁₁^o=−20.8 kJ⋅mol⁻¹) show that complexation is driven by enthalpy (−30.7 kJ⋅mol⁻¹) but retarded by entropy (ΔS ₁₁^o=−33.1 J⋅mol⁻¹⋅K⁻¹) changes. The MM modeling study indicates the formation of different isomeric 1:1 complexes with CDs. PSD, DSC, XRPD, SEM and MM studies established the formation of inclusion complexes in solution and the solid state.     

Densities and Excess Molar Volumes of Binary and Ternary Mixtures Containing Acetonitrile + Acetophenone + 1,2-Pentanediol: Experimental Data,Correlation and Prediction by PFP Theory and ERAS Model

Densities were determined experimentally over the entire range of composition at 298.15 K for the ternary system acetonitrile (1) + acetophenone (2) + 1,2-pentanediol (3) and for the three corresponding binary systems. Excess molar volumes were calculated for the binary and the ternary systems. These results were fitted to variable-degree polynomials. Further, the Prigogine-Flory-Patterson (PFP) theory and Extended Real Associated Solution (ERAS) model were applied to V_m^EV_{m}^{\mathrm{E}} for the binary mixtures of acetonitrile + acetophenone, acetonitrile + 1,2-pentanediol and acetophenone + 1,2-pentanediol, and the findings compared with the experimental results.     

Molecularly imprinted adsorbents for preconcentration and isolation of progesterone and testosterone by solid phase extraction combined with HPLC

The use of a novel procedure of solid-phase extraction with molecularly imprinted polymers (MISPE) has been described. A MISPE procedure relying on tailor-made, artificial-mimic materials capable of selectively rebinding target analytes (steroids) based on a combination of recognition mechanisms, such as size, shape and functionality, was custom designed for progesterone and testosterone. The combination of MISPE with LC/DAD is a simple and an efficient method for the determination and quality control of progesterone and testosterone in human urine samples.     

KHSO4 · H2O/SiO2‐Catalyzed,One‐Pot,Solvent‐Free Synthesis of Pyrazolines,Tetrahydrocarbozoles and Indoles using Microwave Irradiation

A new high‐yielding, operationally simple, solvent‐free, and mild method for preparation of pyrazolines, tetrahydrocarbazoles, and indoles has been developed using KHSO₄ · H₂O impregnated on SiO₂. The reactions have been probed under microwave irradiation (MWI), and ultrasonic and thermal conditions, employing different solid supports. The data revealed that KHSO₄ · H₂O impregnated on SiO₂ under MWI provides the best yields in a shorter time under solvent‐free reaction conditions.     

Interaction between Glyoxal-bis-(2-hydroxyanil) and Bovine Serum Albumin in Solution

The interaction between glyoxal-bis-(2-hydroxyanil) (GBH) and bovine serum albumin (BSA) was studied by spectroscopic methods including fluorescence spectroscopy, circular dichroism (CD) and UV–visible absorption spectra. The mechanism for quenching the fluorescence of BSA by GBH is discussed. The number of binding sites n and observed binding constant K _b were measured by the fluorescence quenching method. The thermodynamic parameters ΔH ^θ , ΔG ^θ , and ΔS ^θ were calculated at different temperatures and the results indicate that hydrogen bonding and van der Waals forces played major roles in the reaction. The distance r between the donor (BSA) and acceptor (GBH) molecules was obtained according to Förster’s theory of non-radiation energy transfer. Synchronous fluorescence and three-dimensional fluorescence spectra were used to investigate the structural change of BSA molecules that occur upon addition of GBH, and these results indicate that the secondary structure of BSA molecules is changed by the presence of GBH.     

Viscosity of Aqueous Solutions of Lithium,Sodium, Potassium,Rubidium and Caesium Cyclohexylsulfamates from 293.15 to 323.15 K

The viscosities of aqueous solutions of lithium, sodium, potassium, rubidium and caesium cyclohexylsulfamates were measured at 293.15, 298.15, 303.15, 313.15 and 323.15 K. The relative viscosity data were analyzed and interpreted in terms of the Kaminsky equation, η _r=1+Ac ^1/2+Bc+Dc ². The viscosity A-coefficient was calculated from the Falkenhagen-Dole theory. The viscosity B-coefficients are positive and relatively large. Their temperature coefficient ∂ B/∂ T is negative or near zero for lithium and sodium salts whereas for potassium, rubidium and caesium salts it is positive. The viscosity D-coefficient is positive. This was explained by the size of the ions, structural solute–solute interactions, hydrodynamic effect, and by higher terms of the long-range Debye-Hückel type of forces. From the viscosity B-coefficients the thermodynamic functions of activation of viscous flow were calculated. The limiting partial molar Gibbs energy of activation of viscous flow of the solute was divided into contributions due to solvent molecules and the solute in the transition state. The activation energy of the solvent molecules was calculated using the limiting Gibbs energy of activation for the conductance of the solute ions. The activation energy of the solvent molecules was then discussed in terms of the nature of the alkali-metal ions and their influence on the structure of water. The limiting activation entropy and enthalpy of the solute for activation of viscous flow were interpreted by ion-solvent bond formation or breaking in the transition state of the solvent. The hydration numbers of the investigated electrolytes were calculated from the specific viscosity of the solutions.     

Partial Molar Volumes of Uracil,Thymine, Adenine in Water and of Adenine in Aqueous Solutions of Uracil and Thymine

The partial molar volumes of uracil, thymine and adenine in water and adenine in aqueous solutions of uracil and thymine, at fixed composition, were determined over a range of temperatures. The partial molar volumes of adenine in aqueous uracil and thymine are less than in pure water.     

Volumetric Properties of Aqueous Solutions of L-Glutamic Acid and Magnesium-L-Glutamate

Densities of aqueous solutions of L-glutamic acid and magnesium-L-glutamate were determined from T=288.15 to 333.15 K at 5 K temperature intervals. The measured densities were used to evaluate the apparent molar volumes, V _2,φ (m,T), the cubic expansion coefficients, α(m,T), and the changes of isobaric heat capacities with respect to pressure, (∂ C _p /∂ p) _T,m . They were qualitatively correlated with changes in the structure of water that occur when L-glutamic acid or magnesium-L-glutamate are present.     

NH2SO3H and H6P2W18O62 · 18H2O-Catalyzed,Three-Component,One-Pot Synthesis of Benzo[c]acridine Derivatives

We report here two simple methods for the synthesis of benzo[c]acridine derivatives from three-component, one-pot condensation of 1-naphthylamine, dimedone, and a variety of substituted aldehydes in the presence of a catalytic amount of NH₂SO₃H or H₆P₂W₁₈O₆₂ · 18H₂O under solvent-free conditions at 120 °C or in refluxing ethanol.     

Synthesis, crystal structure, and optical properties of a novel rare-earth complex Nd(C2F5COO)3 · Phen

A novel neodymium pentafluoropropionate binuclear complex, Nd(C₂F₅COO)₃ · Phen (Phen: 1,10-phenanthroline), was synthesized and characterized by single-crystal X-ray diffraction, elemental analysis, FT-IR spectra, UV–Vis–NIR absorption, and PL spectra. Single-crystal data show that the complex bears centrosymmetric dinuclear structure with a planar ligand configuration. Four carboxylato groups act as η²-chelate-μ²-carboxylato-k¹O:k¹O′-bridge-ligands, the other two occupy the terminal position as monodentate ligands. At the same time, the C–O distances appear averaged which indicate the three atoms of carboxylato forming electron-conjugate system. Hydrogen bond and π–π-stacking link the binuclear to two-dimensional sheet. Optical spectra exhibit the complex possesses typical Nd(III) ion absorption and photoluminescence emission.     

Synthesis Characterization and Viscosity Studies of Homopolymer of Methyl Methacrylate and Copolymer of Methyl Methacrylate and Styrene

A homopolymer of methyl methacrylate (MMA) and its copolymer with styrene at different compositions were synthesized and characterized. Viscosity measurements of the synthesized homopolymer and the copolymers in toluene solutions were performed at 313 K. Different equations were used to calculate the intrinsic viscosity, viscometric constants values, and molecular weight of the synthesized polymers. The values of intrinsic viscosity and viscosity average molecular weight obtained by the two methods (single point determination and graphical extrapolation) were compared in order to verify the validity of the single point determination for the polymers. Viscometric properties derived included the specific viscosity (it determines the contribution of the solute to the viscosity of the solution), the reduced viscosity (that provides a measure of the polymer capacity for increasing the solution viscosity), and the intrinsic viscosity.