Gas-phase reactions of halogenated radical carbene anions with sulfur and oxygen containing species

The reactivities of mono- and dihalocarbene anions (CHCl⁻, CHBr⁻, CF₂⁻, CCl₂⁻, and CBrCl⁻) were studied using a tandem flowing afterglow-selected ion flow tube instrument. Reaction rate constants and product branching ratios are reported for the reactions of these carbene anions with six neutral reagents (CS₂, COS, CO₂, O₂, CO, and N₂O). These anions were found to demonstrate diverse chemistry as illustrated by formation of multiple product ions and by the observed reaction trends. The reactions of CHCl⁻ and CHBr⁻ occur with similar efficiencies and reactivity patterns. Substitution of a Cl atom for an H atom to form CCl₂⁻ and CBrCl⁻ decreases the rate constants; these two anions react with similar efficiencies and reactivity trends. The CF₂⁻ anion displays remarkably different reactivity; these differences are discussed in terms of its lower electron binding energy and the effect of the electronegative fluorine substituents. The results presented here are compared to the reactivity of the CH₂⁻ anion, which has previously been reported.     

Scavenging of and OH radicals in concentrated HCl and NaCl aqueous solutions

In neutral and acidic aqueous solutions containing 2 mol L⁻¹ of Cl⁻, the decay of the solvated electron and the formation of ClOH⁻ and were studied by picosecond pulse radiolysis experiment. The rate constant for the reaction of and H₃O⁺ is 1.3 × 10¹⁰ L mol⁻¹ s⁻¹. The yield of the OH radical at 100 ps is estimated to be 5.0 × 10⁻⁷  mol  J⁻¹.     

Effects of hydroxyl radicals and oxygen species on the 4-chlorophenol degradation by photoelectrocatalytic reactions with TiO2-film electrodes

The supported nano-TiO₂ electrode was prepared by sol–gel and hydrothermal method, and the photoelectrocatalytic degradation of 4-chlorophenol (4-CP) under UV irradiation has been investigated to reveal the roles of hydroxyl radicals and dissolved oxygen species for TiO₂-assisted photocatalytic reactions. The degradation kinetics, the formation and decay of intermediates, the isotopic tracer experiments with H₂O¹⁸, the removal yield of total organic carbon and the formation of active radical species in the presence of oxygen or not were examined by HPLC, GC–MS, TOC and spin-trap ESR spectrometry. It was found that most of OH radicals in the primary hydroxylated intermediates derived from the oxidation of adsorbed H₂O or HO⁻ by photo-holes in the electrochemically assisted TiO₂ photocatalytic system. It also indicates that the enhancement in the separation efficiency of photogenerated charges by applying a positive bias (+0.5 V vs SCE) has little role in the following decomposition and mineralization of these hydroxylated intermediates in the absence of oxygen. According to above experimental results, the pathway of 4-CP photocatalytic degradation was deduced initially. Due to the combined effect of OH radicals and dissolved oxygen species, the hydroxylated 4-chlorphenol, via cis, cis-3-chloromuconic acid, was decomposed into low molecular weight acid and CO₂.     

Formation characteristics of calcium phosphate deposits on a metal surface by H2O2-electrolysis reaction under various conditions

The cathodic electrolysis of H₂O₂ (H₂O₂ + e⁻ → OH⁻ + OH) on a metal surface in the presence of calcium and phosphate ions results in the formation of calcium phosphate deposits on the metal surface. In this study, the deposits formed under various treatment conditions (pHs, concentrations and ratios of calcium/phosphate ions, and so on) were characterized by scanning electron spectroscopy (SEM), and X-ray diffractometry. The exclusive formation of hydroxyapatite, HAP, was observed under comparatively narrow conditions (pH 3–4, [Ca+]/[PO₄³⁻] = 25 mM/15 mM), which is clearly different from the reported conditions for the deposition of HAP on titanium substrates. HAP was deposited in the form of a layer, comprised of morphologically amorphous HAP flakes that were less than 20 nm thick. SEM and FTIR analyses of the deposit at different stages of H₂O₂-electrolysis revealed that a few dozen nanometer-sized spheres of amorphous calcium phosphate were formed in the first step and then fused with each other to form ribbon-like flakes of HAP or broken glass-like brushite, depending on the pH. The pH for HAP formation on a stainless steel surface was markedly lower than that used for titanium, and the observed process by which amorphous calcium phosphate is converted to HAP was markedly different from that for the electrochemical deposition (electrolysis of water) of HAP on a titanium substrate.     

Reactions of CO2 with H, H2 and deuterated analogues

Combining a temperature variable 22-pole ion trap with a cold effusive beam of neutrals, rate coefficients k(T) have been measured for reactions of CO₂⁺ ions with H, H₂ and deuterated analogues. The neutral beam which is cooled in an accommodator to T_ACC, penetrates the trapped ion cloud with a well-characterized velocity distribution. The temperature of the ions, T_22PT, has been set to values between 15 and 300 K. Thermalization is accelerated by using helium buffer gas. For reference, some experiments have been performed with thermal target gas. For this purpose hydrogen is leaked directly into the box surrounding the trap. While collisions of CO₂⁺ with H₂ lead exclusively to the protonated product HCO₂⁺, collisions with H atoms form mainly HCO⁺. The electron transfer channel H⁺ + CO₂ could not be detected (<20%). Equivalent studies have been performed for deuterium. The rate coefficients for reactions with atoms are rather small. Within our relative errors of less than 15%, they do not depend on the temperature of the CO₂⁺ ions nor on the velocity of the atoms (k(T) lays between 4.5 and 4.7 × 10⁻¹⁰ cm³ s⁻¹ with H as target, and 2.2 × 10⁻¹⁰ cm³ s⁻¹ with D). For collisions with molecules, the reactivity increases significantly with falling temperature, reaching the Langevin values at 15 K. These results are reported as k = α (T/300 K)^β with α = 9.5 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.15 for H₂ and α = 4.9 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.30 for D₂.     

Olefin epoxidation catalyzed by [Ru(TDL)(tmeda)H2O] complexes (TDL = tridentate Schiff-base ligand; tmeda = tetramethylethylenediamine)

Mixed-chelate complexes of ruthenium have been synthesized using tridentate Schiff-base ligands (TDLs) derived from condensation of 2-aminophenol or 2-aminobenzoic acid with aldehydes (salicyldehyde, 2-pyridinecarboxaldehyde), and tmeda (tetramethylethylenediamine). [Ru^III(hpsd)(tmeda)(H₂O)]⁺ (1), [Ru^III(hppc)(tmeda)(H₂O)]²⁺ (2), [Ru^III(cpsd)(tmeda)(H₂O)]⁺ (3) and [Ru^III(cppc)(tmeda)(H₂O)]²⁺ (4) complexes (where hpsd²⁻ = N-(hydroxyphenyl)salicylaldiminato); hppc⁻ = N-(2-hydroxyphenylpyridine-2-carboxaldiminato); cpsd²⁻ = (N-(2-carboxyphenyl)salicylaldiminato); cppc⁻ = N-2-carboxyphenylpyridine-2-carboxaldiminato) were characterized by microanalysis, spectral (IR and UV–vis), conductance, magnetic moment and electrochemical studies. Complexes 1–4 catalyzed the epoxidation of cyclohexene, styrene, 4-chlorostyrene, 4-methylstyrene, 4-methoxystyrene, 4-nitrostyrene, cis- and trans-stilbenes effectively at ambient temperature using tert-butylhydroperoxide (t-BuOOH) as terminal oxidant. On the basis of Hammett correlation (log k_rel vs. σ⁺) and product analysis, a mechanism involving intermediacy of a [Ru–O–OBu^t] radicaloid species is proposed for the catalytic epoxidation process.     

Photocycle dynamics of the E149A mutant of cryptochrome 3 from Arabidopsis thaliana

The E149A mutant of the cryDASH member cryptochrome 3 (cry3) from Arabidopsis thaliana was characterized in vitro by optical absorption and emission spectroscopic studies. The mutant protein non-covalently binds the chromophore flavin adenine dinucleotide (FAD). In contrast to the wild-type protein it does not bind N5,N10-methenyl-5,6,7,8-tetrahydrofolate (MTHF). Thus, the photo-dynamics caused by FAD is accessible without the intervening coupling with MTHF. In dark adapted cry3-E149A, FAD is present in the oxidized form (FAD_ox), semiquinone form (FADH), and anionic hydroquinone form (FAD_redH⁻). Blue-light photo-excitation of previously unexposed cry3-E149A transfers FAD_ox to the anionic semiquinone form (FAD⁻) with a quantum efficiency of about 2% and a back recovery time of about 10 s (photocycle I). Prolonged photo-excitation leads to an irreversible protein re-conformation with structure modification of the U-shaped FAD and enabling proton transfer. Thus, a change in the photocycle dynamics occurs with photo-conversion of FAD_ox to FADH, FADH to FAD_redH⁻, and thermal back equilibration in the dark (photocycle II). The photocycle dynamics of cry3-E149A is compared with the photocycle behaviour of wild-type cry3 and other photo-sensory cryptochromes.     

Synthesis and characterization of MnO2 colloids

This work addresses the issue of radiation chemical synthesis of MnO₂ nanoparticles and also illustrates the ease of formation of nanorods and sheets by adroit manipulation of experimental conditions. The radiation chemical yield (G-value) for reduction of Mn (VII) by the hydrated electron was found to be 0.27 μmol J⁻¹ and 0.17 μmol J⁻¹ respectively, when tert. butanol and isopropanol were used as scavengers in nitrogen-saturated solutions. The colloids formed upon irradiation of air-saturated solution and N₂-purged solution with tert. butanol as scavenger were found to be most stable. Irradiation of air-saturated solution containing 4×10⁻⁴ M KMnO₄ at a dose of 1692 Gy resulted in the formation of nanorods of the dimension 100–150 nm and nanospheres in the range 10–20 nm. Irradiation of N₂-purged solution containing tert. butanol as scavenger for OH-produced reticulated structure of nanorods with length varying from 50 to 100 nm at a dose of 1692 Gy. Elemental analysis was performed using scanning electron microscope on MnO₂ formed by reduction and oxidation and the purity was found to be 98% of elemental Mn content.     

Solid–liquid metastable equilibria in the quaternary system (NaCl–KCl–CaCl2–H2O) at 288.15 K

The solubilities and the physicochemical properties (densities, viscosities, refractive indices, conductivities, and pH) in the liquid–solid metastable system (NaCl–KCl–CaCl₂–H₂O) at 288.15 K have been studied using the isothermal evaporation method. Based on the experimental data, the dry-salt phase diagram, water-phase diagram and the diagram of physicochemical properties vs. composition in the system were plotted. The dry-salt phase diagram of the system includes one three-salt co-saturated point, three metastable solubility isotherm curves, and three crystallization regions corresponding to sodium chloride, potassium chloride and calcium chloride hexahydrate. Neither solid solution nor double salts were found. Based on the extended Harvie–Weare (HW) model and its temperature-dependent equation, the values of the Pitzer parameters β⁽⁰⁾, β⁽¹⁾, C for NaCl, KCl and CaCl₂, the mixed ion-interaction parameters θ_Na,K, θ_Na,Ca, θ_K,Ca, Ψ_Na,K,Cl, Ψ_Na,Ca,Cl, Ψ_K,Ca,Cl, the Debye–Hückel parameter A and the standard chemical potentials of the minerals in the quaternary system at 288.15 K were obtained. In addition, the average equilibrium constants of metastable equilibrium solids at the same temperature were obtained using a method derived from the activity product constant for the metastable system. Using the standard chemical potentials of the minerals and the average equilibrium constants of solids at equilibrium, the solubility predictions for the quaternary system are presented. A comparison between the calculated and experimental results shows that the predicted solubilities obtained with the extended HW model using the average equilibrium constants agree well with experimental data.     

Competitive sorption of Cu(II), Eu(III) and U(VI) ions on TiO2 in aqueous solutions—A potentiometric study

The competitive sorption of Cu(II), Eu(III) and U(VI) ions in aqueous solutions by TiO₂, has been investigated by potentiometry at I = 0.1 M NaClO₄, 25 °C and under atmospheric conditions. For Cu(II) ions the investigation was performed directly by means of a Cu²⁺ ion selective electrode, whereas for the Eu(III) and U(VI) ions indirectly based on competition reactions between the Cu(II) ion and the Eu(III) and U(VI) ions. Numerical analysis of the experimental data supports the formation of inner-sphere surface complexes and allows the evaluation of the formation constant of the (TiO)₂Cu, which is found to amount to log β* = 4.3 ± 0.4. Addition of competing Eu(III) and U(VI) ions in the aqueous system leads to replacement of the Cu(II) by the competitor metal ion. Evaluation of the potentiometric data obtained from competition experiments indicates on an ion exchange mechanism. The formation constant of the Eu(III) and U(VI) species adsorbed on TiO₂ is found to be log β* = 4.4 ± 0.7 and 4.8 ± 0.8, respectively. The relative affinity of the TiO₂ surface for the metal ions under investigation is U(VI) > Eu(III) > Cu(II).     

Formal chromium–chromium triple bonds and bent rings in the binuclear cycloheptatrienylchromium carbonyls (C7H7)2Cr2(CO)n (n = 6, 5, 4, 3, 2, 1, 0): A density functional theory study

Binuclear cycloheptatrienylchromium carbonyls of the type (C₇H₇)₂Cr₂(CO)_n (n = 6, 5, 4, 3, 2, 1, 0) have been investigated by density functional theory. Energetically competitive structures with fully bonded heptahapto η⁷-C₇H₇ rings are not found for (C₇H₇)₂Cr₂(CO)_n structures having two or more carbonyl groups. This result stands in contrast to the related (C_nH_n)₂M₂(CO)_n (M = Mn, n = 6; M = Fe, n = 5; M = Co, n = 4) systems. Most of the predicted (C₇H₇)₂Cr₂(CO)_n structures have bent trihapto or pentahapto C₇H₇ rings and CrCr distances in the range 2.4–2.5 Å suggesting formal triple bonds. In some cases rearrangement of the heptagonal C₇H₇ ring to a tridentate cyclopropyldivinyl or tridentate bis(carbene)alkyl ligand is observed. In addition structures with CO insertion into the C₇H₇–Cr bond are predicted for (C₇H₇)₂Cr₂(CO)_n (n = 6, 4, 2). The global minima found for the (C₇H₇)₂Cr₂(CO)_n derivatives for n = 6, 5, and 4 are (η⁵-C₇H₇)(OC)₂CrCr(CO)₄(η¹-C₇H₇), (η³-C₇H₇)(OC)₂CrCr(CO)₃(η^2,1- C₇H₇), and (η⁵-C₇H₇)₂Cr₂(CO)₄, respectively. The global minima for (C₇H₇)₂Cr₂(CO)_n (n = 3, 2) have rearranged C₇H₇ groups. Singlet and triplet structures with heptahapto η⁷-C₇H₇ rings are found for the dimetallocenes (η⁷-C₇H₇)₂Cr₂(CO) and (η⁷-C₇H₇)₂Cr₂, with the singlet structures being of much lower energies in both cases.     

Photoactivity of mechanochemically prepared nanoparticulate titanium dioxide investigated by EPR spectroscopy

Titanium dioxide nanopowders were prepared by mechanochemical synthesis in a high-energy ball mill using TiOSO₄·xH₂O and Na₂CO₃ followed by annealing in the temperature range 200–800 °C. The UVA photonic efficiency of radical processes on synthesized TiO₂ powders was determined by in situ EPR spectroscopy, using, as indicators, the N-oxide spin trapping agents (5,5-dimethyl-1-pyrroline N-oxide and 5-(diisopropoxy-phosphoryl)-5-methyl-1-pyrroline N-oxide) or the radical cation of 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate, ABTS⁺). The results obtained by monitoring the photoinduced generation of hydroxyl radical spin adducts correlated with those found by the investigation of the photoreduction of ABTS⁺. The presence of iron and chromium ions, which were evidenced in samples milled in steel, decreased the photonic efficiency of radical processes. The presence of a sulfate salt matrix during the annealing process distinctly inhibits the transformation of anatase to rutile. The highest photocatalytic activity was shown by anatase samples which were prepared by milling in corundum and annealed at 700 °C. They were composed of crystallites with a mean size of 25–30 nm and well developed crystal faces.     

Study on dynamic interfacial tension of 3-dodecyloxy-2-hydroxypropyl trimethyl ammonium bromide at liquid/liquid interface

Dynamic interfacial tension between aqueous solutions of 3-dodecyloxy-2-hydroxypropyl trimethyl ammonium bromide (R₁₂HTAB) and n-hexane were measured using the spinning drop method. The effects of the R₁₂HTAB concentration (the concentration below the CMC) and temperature on the dynamic interfacial tension have been investigated; the reason of the change of dynamic interfacial tension with time has been discussed. The effective diffusion coefficient, D_a, and the adsorption barrier, _a, have been obtained from the experimental data using the extended Word–Tordai equation. The results show that the dynamic interfacial tension becomes smaller while _a becomes higher with increasing R₁₂HTAB concentration in the bulk aqueous phase. D_a decreases from 5.56 × 10⁻¹² m⁻² s⁻¹ to 0.87 × 10⁻¹² m⁻² s⁻¹ while _a increases from 5.41 kJ mol⁻¹ to 7.74 kJ mol⁻¹ with the increase of concentration in the bulk solution of R₁₂HTAB from 0.5 × 10⁻³ mol dm⁻³ to 4 × 10⁻³ mol dm⁻³. Change of temperature affects the adsorption rate through altering D_a and _a. The value of D_a increases from 5.56 × 10⁻¹² m⁻² s⁻¹ to 13.98 × 10⁻¹² m⁻² s⁻¹ while that of _a decreases from 5.41 kJ mol⁻¹ to 5.07 kJ mol⁻¹ with temperature ascending from 303 K to 323 K. The adsorption of surfactant from the bulk phase into the interface follows a mixed diffusion–activation mechanism, which has been discussed in the light of interaction between surfactant molecules, diffusion and thermo-motion of molecules.     

Production of reactive oxygen species induced by a new [60]fullerene derivative bearing a tetrazole unit and its possible biological applications

The wide range of physical and chemical properties of modified fullerenes has drawn increasing attention in the past few years. As part of this research, this paper describes the preparation, characterization, and photophysical properties of a new fullerene derivative chemically modified with a tetrazole. The photophysical properties were studied by EPR radical spin-trapping technique and showed that reactive oxygen species (ROS) can be produced through UVA photosensitization. EPR spin-trapping experiments with singlet oxygen (¹O₂) and superoxide (O₂⁻) inhibitors (β-carotene and superoxide dismutase, respectively) revealed also that: (i) the main ROS produced is ¹O₂ and (ii) ¹O₂ is being partially dismutated to O₂⁻. The results suggest that this derivative can be used in biological applications, as for example, in topic photodynamic therapy (PDT) as a photosensitizer.     

EPR and optical absorption studies of Cr ions in d-gluconic acid monohydrate

EPR studies are carried out on Cr³⁺ ions doped in d-gluconic acid monohydrate (C₆H₁₂O₇·H₂O) single crystals at 77 K. From the observed EPR spectra, the spin Hamiltonian parameters g, |D| and |E| are measured to be 1.9919, 349 (×10⁻⁴) cm⁻¹ and 113 (×10⁻⁴) cm⁻¹, respectively. The optical absorption of the crystal is also studied at room temperature. From the observed band positions, the cubic crystal field splitting parameter Dq (2052 cm⁻¹) and the Racah interelectronic repulsion parameter B (653 cm⁻¹) are evaluated. From the correlation of EPR and optical data the nature of bonding of Cr³⁺ ion with its ligands is discussed.     

Isolation of p-tricyanovinylphenyldicyanomethide ion via a [2+2] cycloaddition of 7,7,8,8-tetracyanoquinodimethane (TCNQ) molecules

In the presence of CoCl₂·6H₂O and dppm (bis(diphenylphosphino) methane), the reaction of TCNQ (7,7,8,8-tetracyanoquinodimethane) molecules by [2+2] cycloaddition forms a p-tricyanovinylphenyldicyanomethide ion (PCQ⁻), which has been obtained as one anion unit in one new compound [Co(dppmdo)₃][PCQ⁻]₂·H₂O 1 (dppmdo = bis(diphylphospine oxide) methane). Its structure was determined by X-ray crystallography: 1 crystallizes in with a = 14.174(3) Å, b = 19.553(4) Å, c = 19.776(4) Å, α = 112.72(3)°, β = 95.43(3)°, γ = 110.79(3)°, and Z = 2. It was characterized by IR spectra, UV–Vis spectra, and cyclic voltammogram. Magnetic properties indicate that no magnetic coupling between PCQ⁻ and [Co(dppmdo)₃]²⁺ unit.     

Effect of inorganic ions on the photocatalytic degradation of humic acid

The article studies on the effects of six inorganic ions (Ca²⁺, Mg²⁺, Cl^?, SO ₄ ^2? , H₂PO ₄ ^? , and HCO ₃ ^? ) on titanium dioxide (TiO₂)-based photocatalytic degradation of humic acid (HA). We focus on the effects of the inorganic ions on HA characters, adsorption of HA on TiO₂ and photocatalytic degradation of HA. The results indicate that Ca²⁺ and Mg²⁺ with HA can form complexes which can decrease the solubility of HA, and then increase the HA adsorbed on TiO₂. However, the complex is more difficult to be degraded than HA. The effects of Cl^? and SO ₄ ^2? are closely related to their influences on HA solubility. The solubility changes of HA to some extent can enhance the adsorption of HA on TiO₂, and promote the photocatalytic degradation. Nevertheless, great solubility decreasing of HA can weaken the photocatalytic degradation. HCO ₃ ^? and H₂PO ₄ ^? can inhibit the photocatalytic degradation process seriously, because HCO ₃ ^? and H₂PO ₄ ^? are the strong scavengers of hydroxyl radicals, and can weaken the adsorption of HA on TiO₂ due to adsorption competition.     

Etude des propriétés de conduction électrique des polyphosphates: Li3Ba2(PO3)7, LiPb2(PO3)5, LiCs(PO3)2, et αLiK(PO3)2

The electrical conductivity of the crystallized polyphosphates Li₃Ba₂(PO₃)₇, LiPb₂(PO₃)₅, LiCs(PO₃)₂, and αLiK(PO₃)₂ has been determined at different temperatures by impedance spectroscopy. The conductivity, σ, spreads within a range of 1.59 × 10⁻⁸ to 1.79 × 10⁻⁷ S cm⁻¹ at 573 K, and from 1.71 × 10⁻⁵ to 9.86 × 10⁻⁴ S cm⁻¹ at 773 K. The transport should be assumed in the majority by the lithium ions with regard to the structural characteristics of these polyphosphates. The results are discussed and compared to the conductivity properties of other lithium ion conductors.     

Ternary [Al2O3–electrolyte–Cu] species: EPR spectroscopy and surface complexation modeling

Cu²⁺ binding on γ-Al₂O₃ is modulated by common electrolyte ions such as Mg²⁺, , and in a complex manner: (a) At high concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ is inhibited. This is partially due to bulk ionic strength effects and, mostly, due to direct competition between Mg²⁺ and Cu²⁺ ions for the SO⁻ surface sites of γ-Al₂O₃. (b) At low concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ can be enhanced. This is due to synergistic coadsorption of Cu²⁺ and electrolyte anions, and _. This results in the formation of ternary surface species (SOH₂SO₄Cu)⁺, (SOH₂PO₄Cu), and (SOH₂HPO₄Cu)⁺ which enhance Cu²⁺ uptake at pH < 6. The effect of phosphate ions may be particularly strong resulting in a 100% Cu uptake by the oxide surface. (c) EPR spectroscopy shows that at pH  pH_PZC, Cu²⁺ coordinates to one SO⁻ group. Phosphate anions form stronger, binary or ternary, surface species than sulfate anions. At pH  pH_PZC Cu²⁺ may coordinate to two SO⁻ groups. At pH  pH_PZC electrolyte ions and are bridging one O-atom from the γ-Al₂O₃ surface and one Cu²⁺ ion forming ternary [γ-Al₂O₃/elecrolyte/Cu²⁺] species.     

Nonadiabatic dissociation dynamics of ClHD van der Waals complex initiated by electron detachment of Cl–HD

Nuclear dynamics following the electron detachment of the Cl⁻–HD anion is investigated by a time-dependent wave packet propagation approach. Photodetachment of Cl⁻–HD promotes it to the van der Waals well region of the reactive ClHD potential energy surface. The latter is a manifold of three electronic states coupled by the electronic and (relativistic) spin-orbit coupling. Among the three surfaces, the electronic ground one is of ²Σ_1/2 type and yields products in their electronic ground state. The remaining two, ²Π_3/2 and ²Π_1/2, on the other hand, yield products in their excited electronic states. However, these two can yield products in their electronic ground state via nonadiabatic transitions to the ²Σ_1/2 state. The channel specific, HCl + D or DCl + H or Cl + HD, dissociation probabilities on this latter state are calculated both in the uncoupled and coupled surface situations. Separate initial transitions (via, photodetachment) to the ²Σ_1/2, ²Π_3/2 and ²Π_1/2 adiabatic electronic states of ClHD are considered in order to elucidate the nonadiabatic coupling effects on this important class of chemical reactions initiated by an electron detachment.