Thermochemistry of the mixed calcium phosphate Ca8P2O7(PO4)4

The calcium mixed phosphate Ca₈P₂O₇(PO₄)₄ has been synthesized by thermal decomposition of octacalcium phosphate previously prepared by precipitation in ammoniacal phosphate solution. The enthalpy of formation at 298.15 K referenced to β-tricalcium phosphate and calcium pyrophosphate is determined. β-Tricalcium phosphate was prepared by two methods: precipitation in ammoniacal aqueous medium and high temperature solid-state reaction. Calcium pyrophosphate was prepared by high temperature solid-state reaction. All the compounds are characterized by chemical analysis, X-rays diffraction and IR spectroscopy. The enthalpy of formation +10.83 ± 0.63 kJ mol⁻¹ is obtained by solution calorimetry at 298.15 K in nitric acid.     

Heat capacity, enthalpy and entropy of strontium niobate Sr2Nb2O7 and calcium niobate Ca2Nb2O7

The heat capacity and the enthalpy increments of strontium niobate Sr₂Nb₂O₇ and calcium niobate Ca₂Nb₂O₇ were measured by the relaxation time method (2–300 K), DSC (260–360 K) and drop calorimetry (720–1370 K). Temperature dependencies of the molar heat capacity in the form C_pm = 248.0 + 0.04350T − 3.948 × 10⁶/T² J K⁻¹ mol⁻¹ for Sr₂Nb₂O₇ and C_pm = 257.2 + 0.03621T − 4.434 × 10⁶/T² J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇ were derived by the least-square method from the experimental data. The molar entropies at 298.15 K, S_m°(298.15 K) = 238.5 ± 1.3 J K⁻¹ mol⁻¹ for Sr₂Nb₂O₇ and S_m°(298.15 K) = 212.4 ± 1.2 J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇, were evaluated from the low-temperature heat capacity measurements.     

Energetics of copper diphosphates – Cu2P2O7 and Cu3(P2O6OH)2

Differential scanning calorimetry and high temperature oxide melt solution calorimetry are used to study enthalpy of phase transition and enthalpies of formation of Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂. α-Cu₂P₂O₇ is reversibly transformed to β-Cu₂P₂O₇ at 338–363 K with an enthalpy of phase transition of 0.15 ± 0.03 kJ mol⁻¹. Enthalpies of formation from oxides of α-Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂ are −279.0 ± 1.4 kJ mol⁻¹ and −538.8 ± 2.7 kJ mol⁻¹, and their standard enthalpies of formation (enthalpy of formation from elements) are −2096.1 ± 4.3 kJ mol⁻¹ and −4302.7 ± 6.7 kJ mol⁻¹, respectively. The presence of hydrogen in diphosphate groups changes the geometry of Cu(II) and decreases acid–base interaction between oxide components in Cu₃(P₂O₆OH)₂, thus decreasing its thermodynamic stability.     

Vibrational spectroscopic study of the antimonate mineral bindheimite Pb2Sb2O6(O,OH)

Raman spectroscopy complimented with infrared spectroscopy has been used to characterise the antimonate mineral bindheimite Pb₂Sb₂O₆(O,OH). The mineral is characterised by an intense Raman band at 656 cm⁻¹ assigned to SbO stretching vibrations. Other lower intensity bands at 664, 749 and 814 cm⁻¹ are also assigned to stretching vibrations. This observation suggests the non-equivalence of SbO units in the structure. Low intensity Raman bands at 293, 312 and 328 cm⁻¹ are assigned to the OSbO bending vibrations. Infrared bands at 979, 1008, 1037 and 1058 cm⁻¹ may be assigned to δOH deformation modes of SbOH units. Infrared bands at 1603 and 1640 cm⁻¹ are assigned to water bending vibrations, suggesting that water is involved in the bindheimite structure. Broad infrared bands centred upon 3250 cm⁻¹ supports this concept. Thus the true formula of bindheimite is questioned and probably should be written as Pb₂Sb₂O₆(O,OH,H₂O).     

C60 trianion-mediated electrocatalysis and amperometric sensing of hydrogen peroxide

Heterogeneous electrocatalytic reduction of hydrogen peroxide (H₂O₂) by C₆₀ is reported for the first time. C₆₀ is embedded in tetraoctylammonium bromide (TOAB) film and is characterized by scanning electron microscopy and cyclic voltammetry. Electrocatalytic studies show that the trianion of C₆₀ mediates the electrocatalytic reduction of H₂O₂ in aqueous solution containing 0.1 M KCl. Application of such film modified electrode as an amperometric sensor for H₂O₂ determination is also examined. The sensor shows a fast response within 1 s and a linear response is obtained (R = 0.9986) in the concentration range from 3.33 × 10⁻⁵ to 2.05 × 10⁻³ mol L⁻¹ for H₂O₂, with the detection limit of 2 × 10⁻⁵ mol L⁻¹ and the sensitivity of 1.65 μA mM⁻¹. A good repeatability and stability is shown for the sensor during the experiment.     

Sr2NiMoO6−δ as anode material for LaGaO3-based solid oxide fuel cell

The double-perovskite Sr₂NiMoO_6−δ (SNMO) was investigated as an anode material of a solid oxide fuel cell (SOFC). With a 300 μm thick La_0.9Sr_0.1Ga_0.8Mg_0.2O_3−σ (LSGM) disk as electrolyte and Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ as the cathode, the SNMO anode showed power densities of 819 mW cm⁻² in hydrogen at 1123 K. Moreover, there was no buffer layer between anode and electrolyte, which would reduce design techniques and save design cost. After test no chemical reaction was discovered between anode and electrolyte. The anode exhibited good conductivity and the value was around 60 S cm⁻¹ in H₂. Also it had almost linear thermal expansion from room temperature to 1253 K and the average thermal expansion coefficient was about 12.14 × 10⁻⁶ K⁻¹, which was quite close to that of La_0.9Sr_0.lGa_0.8Mg_0.2O₃ (12.17 × 10⁻⁶ K⁻¹) electrolyte.     

Facile hydrosilylation of norbornadiene by silanes R3SiH and R2SiH2 with molybdenum catalysts

Photochemically activated [Mo(CO)₆] and [Mo(CO)₄(η⁴-nbd)] have been demonstrated to be very effective catalysts for hydrosilylation of norbornadiene (nbd) by tertiary (Et₃SiH, Cl₃SiH) and secondary (Et₂SiH₂ and Ph₂SiH₂) silanes to give 5-silyl-2-norbornene, which under the same reaction conditions transform in ring-opening metathesis polymerization (ROMP) to unsaturated polymers and to a double hydrosilylation product, 2,6-bis(silyl)norbornane. The yield of a particular reaction depends very strongly on the kind of silane involved. The reaction products were identified by means of chromatography (GC–MS) and ¹H and ¹³C NMR spectroscopy. In photochemical reaction of [Mo(CO)₄(η⁴-nbd)] and Ph₂SiH₂ in cyclohexane-d₁₂, η²-coordination of the SiH bond to the molybdenum atom is supported by ¹H NMR spectroscopy due to the detection of two equal-intensity doublets with ²J_HH = 5.4 Hz at δ 6.12 and −5.86 ppm.     

Solubility of (UO2)3(PO4)2?4H2O in H+-Na+-OH?-H2PO?4-HPO2?4-PO3?4-H2O and Its Comparison to the Analogous PuO2 +2 System

The objectives of this study were to address uncertainties in the solubility product of (UO₂)₃(PO₄)₂⋅4H₂O(c) and in the phosphate complexes of U(VI), and more importantly to develop needed thermodynamic data for the Pu(VI)-phosphate system in order to ascertain the extent to which U(VI) and Pu(VI) behave in an analogous fashion. Thus studies were conducted on (UO₂)₃(PO₄)₂⋅4H₂O(c) and (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubilities for long-equilibration periods (up to 870 days) in a wide range of pH values (2.5 to 10.5) at fixed phosphate concentrations of 0.001 and 0.01 M, and in a range of phosphate concentrations (0.0001–1.0 M) at fixed pH values of about 3.5. A combination of techniques (XRD, DTA/TG, XAS, and thermodynamic analyses) was used to characterize the reaction products. The U(VI)-phosphate data for the most part agree closely with thermodynamic data presented in Guillaumont et al.,⁽¹⁾ although we cannot verify the existence of several U(VI) hydrolyses and phosphate species and we find the reported value for formation constant of UO₂PO⁻₄ is in error by more than two orders of magnitude. A comprehensive thermodynamic model for (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubility in the H⁺-Na⁺-OH⁻-Cl⁻-H₂PO⁻₄-HPO²⁻₄-PO³⁻₄-H₂O system, previously unavailable, is presented and the data shows that the U(VI)-phosphate system is an excellent analog for the Pu(VI)-phosphate system.     

Influence de certains ions inorganiques, de l'éthanol et du peroxyde d'hydrogène sur la photominéralisation du β-naphtol en présence de TiO2

TiO₂ photocatalytic mineralization of β-naphthol: influence of some inorganic ions, ethanol, and hydrogen peroxide. In this work, the photocatalytic oxidation of β-naphthol in aqueous suspensions of TiO₂ was investigated at room temperature, by following the formation of CO₂. The disappearance of β-naphthol fits a Langmuir-Hinshelwood kinetic model. The activation energy for the degradation reaction of β-naphthol is estimated at 10.2 kJ/mol. The effects of some additives such as ethanol, H₂O₂, and inorganic ions (Cl⁻, SO₄²⁻, HCO₃⁻, NO₃⁻, Fe³⁺, Cu^2+, and Cr³⁺) on the photomineralization of β-naphthol were examined. The inhibition of the anions for this reaction was in the order : NO₃⁻ < HCO₃⁻ < SO₄²⁻ < Cl⁻. This can be due to a partial blockage of catalyst active sites by these ions or their reaction with an oxidizing radical such as OH. The most photoactive systems for β-naphthol degradation were found in the presence of ferric ions, while the addition of Cr³⁺ strongly inhibited the photocatalytic decomposition of β-naphthol.     

Effect of chelating agent on the oxidation rate of PCP in the magnetite/H2O2 system at neutral pH

The complex [Rh(CO)₂Cl]₂ reacts with two molar equivalent of pyridine carboxylic acids ligands Py-2-COOH(a), Py-3-COOH(b) and Py-4-COOH(c) to yield rhodium(I) dicarbonyl chelate complex [Rh(CO)₂(L^/)](1a) {L^/ = η²-(N,O) coordinated Py-2-COO⁻(a^/)} and non-chelate complexes [Rh(CO)₂ClL^//](1b,c) {L^// = η¹-(N) coordinated Py-3-COOH(b), Py-4-COOH(c)}. The complexes 1 undergo oxidative addition (OA) reactions with different electrophiles such as CH₃I, C₂H₅I, C₆H₅CH₂Cl and I₂ to give penta coordinated Rh(III) complexes of the types [Rh(CO)(CORⁿ)XL^/], {n = 1,2,3; R¹ = CH₃(2a); R² = C₂H₅(3a); X = I and R³ = CH₂C₆H₅ (4a); X = Cl}, [Rh(CO)I₂L^/](5a), [Rh(CO)(CORⁿ)ClXL^//] {R¹ = CH₃(6b,c); R² = C₂H₅(7b,c); X = I and R³ = CH₂C₆H₅ (8b,c); X = Cl} and [Rh(CO)ClI₂L^//](9b,c). The complexes have been characterized by elemental analysis, IR and ¹H NMR spectroscopy. Kinetic data for the reaction of 1a–b with CH₃I indicate a first order reaction. The catalytic activity of 1a–c for the carbonylation of methanol to acetic acid and its ester is evaluated and a higher turn over number (TON = 810–1094) is obtained compared with that of the well-known commercial species [Rh(CO)₂I₂]⁻ (TON = 653) at mild reaction conditions (temperature 130 ± 5 °C, pressure 35 ± 5 bar).     

Investigation on double perovskite Ba4Ca2Ta2O11

The structure, conductivity and water uptake of the oxygen-deficient perovskite-type compound Ba₄Ca₂Ta₂O₁₁ have been investigated. Ba₄Ca₂Ta₂O₁₁ crystallizes in the cryolite structure (cubic, Fm3m SG) with a = 8.4508(2) Å, under dry air. The compound can be partially hydrated up to a maximum water content of approximately 0.52 mol H₂O per mol Ba₄Ca₂Ta₂O₁₁. In moist air, the structure symmetry becomes monoclinic (C2/m) and the temperature dependence of total conductivity shows a different behavior because of changes in transport mechanism. Three regions can be observed as a function of temperature. For the low temperature range 200–400 °C, the protonic conduction is prevailing with an activation energy E_A = 0.85 eV. In the intermediate temperature range (400–600 °C), O²⁻ anionic and protonic conductions are mixed with an activation energy E_A = 0.45 eV and in the third region, for temperatures above 600 °C, O²⁻conduction is prevailing with an activation energy E_A = 0.85 eV.     

Reactions of CO2 with H, H2 and deuterated analogues

Combining a temperature variable 22-pole ion trap with a cold effusive beam of neutrals, rate coefficients k(T) have been measured for reactions of CO₂⁺ ions with H, H₂ and deuterated analogues. The neutral beam which is cooled in an accommodator to T_ACC, penetrates the trapped ion cloud with a well-characterized velocity distribution. The temperature of the ions, T_22PT, has been set to values between 15 and 300 K. Thermalization is accelerated by using helium buffer gas. For reference, some experiments have been performed with thermal target gas. For this purpose hydrogen is leaked directly into the box surrounding the trap. While collisions of CO₂⁺ with H₂ lead exclusively to the protonated product HCO₂⁺, collisions with H atoms form mainly HCO⁺. The electron transfer channel H⁺ + CO₂ could not be detected (<20%). Equivalent studies have been performed for deuterium. The rate coefficients for reactions with atoms are rather small. Within our relative errors of less than 15%, they do not depend on the temperature of the CO₂⁺ ions nor on the velocity of the atoms (k(T) lays between 4.5 and 4.7 × 10⁻¹⁰ cm³ s⁻¹ with H as target, and 2.2 × 10⁻¹⁰ cm³ s⁻¹ with D). For collisions with molecules, the reactivity increases significantly with falling temperature, reaching the Langevin values at 15 K. These results are reported as k = α (T/300 K)^β with α = 9.5 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.15 for H₂ and α = 4.9 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.30 for D₂.     

Electrochemical kinetics and cycling performance of nano Li[Li0.23Co0.3Mn0.47]O2 cathode material for lithium ion batteries

Li[Li_0.23Co_0.3Mn_0.47]O₂ cathode material was prepared by a sol–gel method. The material had a primary particle size of about 100 nm, covered by a 30 Å of Li₂CO₃ layer. The material showed promising electrochemical performance when cycled up to 3C rate. The electrochemical kinetics of the first charge was much slower than that of the second charge, due to the complex electrochemical process which involved not only Li⁺ diffusion but also release of oxygen. By taking account of this, the material was pre-charged very slowly (C/50) in the first cycle. This led to excellent electrochemical performance in the following cycles. For instance, the 1C-rate capacity increased to 168 mA h g⁻¹ after 50 cycles, comparing with the 145 mA h g⁻¹ obtained without pre-charging.     

Nanocrystalline ZnMn2O4 as a novel lithium-storage material

Nanocrystalline ZnMn₂O₄ is prepared by a polymer-pyrolysis route and used as a novel anode for lithium ion batteries. XRD and HRTEM studies reveal that the products are highly phase-pure and 30–60 nm in size. Galvanostatic cycling of ZnMn₂O₄ electrode at 100 mA g⁻¹ (about 0.52 mA cm⁻²) between 0.01 and 3.0 V up to 50 cycles exhibits almost stable cycling performance between 10 and 50 cycles with only an average capacity fade of 0.20% per cycle and the electrode still maintains a capacity of 569 mAh g⁻¹ after 50 cycles.     

Double electropolymer modified platinum electrode to follow the kinetic process H2O2 + ascorbic acid. Influence of the reaction on amperometric biosensor applications

A Pt electrode modified by a polypyrrole/poly(orthophenylenediamine) bilayer membrane able to entrap large molecules such as glucose oxidase was used to investigate (at 27°C and pH 7) the kinetics of ascorbic acid (AA) oxidation by hydrogen peroxide (H₂O₂ + AA → 2H₂O + DAA) by following the H₂O₂ concentration as a function of time. The largely unmatched rejection characteristics of this device towards AA permitted it to operate even in the presence of high AA/H₂O₂ ratios, e.g. 1000: 1. Under these conditions, pseudo-first-order kinetic constant values ranging from 3.26 × 10⁻³ to 4.10 × 10⁻³ s⁻¹ were obtained at [AA] = 2 mM and initial [H₂O₂] = 2 μM. The potential influence of the above reaction on sensitivity and reliability of H₂O₂-detecting biosensors in the presence of AA is discussed critically, taking into account also the recent, and sometimes conflicting, literature views on the problem.     

Preparation and characterization of spherical V2O3 nanopowder

V₂O₃ nanopowder with spherical particles was prepared by reducing pyrolysis of the precursor, (NH₄)₅[(VO)₆(CO₃)₄(OH)₉]·10H₂O, in H₂ atmosphere. The thermolysis process of the precursor in a H₂ flow was investigated by thermogravimetric analysis and differential thermal analysis. The results indicate that pure V₂O₃ forms at 620°C and crystallizes at 730°C. The effects of various reductive pyrolysis conditions on compositions of V₂O₃ products were studied. Scanning electron micrographs show that the particles of the V₂O₃ powder obtained at 650°C for 1 h are spherical about 30 nm in size with more homogeneous distribution. Experiments show that nanopowder has larger adsorption capacity to gases and is more easily reoxidized by air at room temperature than micropowder. Differential scanning calorimetry experiment indicates that the temperature of phase transition of nano-V₂O₃ powder is −119.5°C on cooling or −99.2°C on heating. The transition heats are −12.55 J g⁻¹ on cooling and 11.42 J g⁻¹ on heating, respectively.     

Reactions of small negative ions with O2(a Δg) and O2(X Σg)

The rate constants and product ion branching ratios were measured for the reactions of various small negative ions with O₂(X ³Σ_g⁻) and O₂(a ¹Δ_g) in a selected ion flow tube (SIFT). Only NH₂⁻ and CH₃O⁻ were found to react with O₂(X) and both reactions were slow. CH₃O⁻ reacted by hydride transfer, both with and without electron detachment. NH₂⁻ formed both OH⁻, as observed previously, and O₂⁻, the latter via endothermic charge transfer. A temperature study revealed a negative temperature dependence for the former channel and Arrhenius behavior for the endothermic channel, resulting in an overall rate constant with a minimum at 500 K. SF₆⁻, SF₄⁻, SO₃⁻ and CO₃⁻ were found to react with O₂(a ¹Δ_g) with rate constants less than 10⁻¹¹ cm³ s⁻¹. NH₂⁻ reacted rapidly with O₂(a ¹Δ_g) by charge transfer. The reactions of HO₂⁻ and SO₂⁻ proceeded moderately with competition between Penning detachment and charge transfer. SO₂⁻ produced a SO₄⁻ cluster product in 2% of reactions and HO₂⁻ produced O₃⁻ in 13% of the reactions. CH₃O⁻ proceeded essentially at the collision rate by hydride transfer, again both with and without electron detachment. These results show that charge transfer to O₂(a ¹Δ_g) occurs readily if the there are no restrictions on the ion beyond the reaction thermodynamics. The SO₂⁻ and HO₂⁻ reactions with O₂(a) are the only known reactions involving Penning detachment besides the reaction with O₂⁻ studied previously [R.S. Berry, Phys. Chem. Chem. Phys., 7 (2005) 289–290].     

Fabrication of mesoporous SiO2–C–Fe3O4/γ–Fe2O3 and SiO2–C–Fe magnetic composites

A synthetic method for the fabrication of silica-based mesoporous magnetic (Fe or iron oxide spinel) nanocomposites with enhanced adsorption and magnetic capabilities is presented. The successful in situ synthesis of magnetic nanoparticles is a consequence of the incorporation of a small amount of carbon into the pores of the silica, this step being essential for the generation of relatively large iron oxide magnetic nanocrystals (10 ± 3 nm) and for the formation of iron nanoparticles. These composites combine good magnetic properties (superparamagnetic behaviour in the case of SiO₂–C–Fe₃O₄/γ–Fe₂O₃ samples) with a large and accessible porosity made up of wide mesopores (>9 nm). In the present work, we have demonstrated the usefulness of this kind of composite for the adsorption of a globular protein (hemoglobin). The results obtained show that a significant amount of hemoglobin can be immobilized within the pores of these materials (up to 180 mg g⁻¹ for some of the samples). Moreover, we have proved that the composite loaded with hemoglobin can be easily manipulated by means of an external magnetic field.     

Photoelectrochemistry of TiO2 particles: efficient electron transfer from the TiO2 particles to a redox enzyme

Electron transfer from photoexcited TiO₂ particles to dissolve oxygen (O₂), and then to an active center of superoxide dismutase (SOD), was investigated by a slurry electrode technique. As a result of electron transfer, the superoxide anion (O₂⁻) was formed initially, and was then further converted effectively into H₂O₂ by SOD catalysis. At a constant applied potential of 0.6 V (vs. SCE), an increase in photocurrent resulting from oxidation of O₂⁻ and H₂O₂ on a SnO₂ working electrode was observed. However, such an increase in photocurrent decreased rapidly on the addition of catalase, which is a scavenger of H₂O₂.     

Synthesis and characterization of MnO2 colloids

This work addresses the issue of radiation chemical synthesis of MnO₂ nanoparticles and also illustrates the ease of formation of nanorods and sheets by adroit manipulation of experimental conditions. The radiation chemical yield (G-value) for reduction of Mn (VII) by the hydrated electron was found to be 0.27 μmol J⁻¹ and 0.17 μmol J⁻¹ respectively, when tert. butanol and isopropanol were used as scavengers in nitrogen-saturated solutions. The colloids formed upon irradiation of air-saturated solution and N₂-purged solution with tert. butanol as scavenger were found to be most stable. Irradiation of air-saturated solution containing 4×10⁻⁴ M KMnO₄ at a dose of 1692 Gy resulted in the formation of nanorods of the dimension 100–150 nm and nanospheres in the range 10–20 nm. Irradiation of N₂-purged solution containing tert. butanol as scavenger for OH-produced reticulated structure of nanorods with length varying from 50 to 100 nm at a dose of 1692 Gy. Elemental analysis was performed using scanning electron microscope on MnO₂ formed by reduction and oxidation and the purity was found to be 98% of elemental Mn content.