由5-取代基间苯二甲酸和二咪唑衍生物构筑的两个二维钴(II)的配合物的合成、结构及性质

通过溶剂热法合成了2个二维钴配位聚合物[Co_2(1,4-bib)_2(5-hipa)_2]_n(1)(5-H_2hipa=5-hydroxyisophthalic acid,1,4-bib=1,4-bis(1-imidazolyl)benzene),[Co(Hbpt)(4,4′-bidpe)]_n(2)(H_3bpt=biphenyl-4,4′,5-tricarboxylic acid,4,4′-bidpe=4,4′-bis(imidazol-1-yl)diphenyl ether)。X射线单晶衍射实验测定和结构解析结果表明,配合物1、2中5-hipa~(2-)、Hbpt~(2-)配体的2个相间羧基将相邻的Co~(2+)连接形成含有Co_2O_4C_2八元环和Co_2O_4C_(10)十六元环的一维链状结构。一维链之间通过1,4-bib,4,4′-bidpe配体上的咪唑基N原子与相邻Co(Ⅱ)离子配位连结形成二维层状结构。配合物1层与层之间通过相邻层中的5-hipa~(2-)配体的羟基与羧基的分子间氢键连结形成三维超分子网络结构。配合物2中,Hbpt配体的羧基氢与层内的相邻链上参与弱配位羧基氧形成层内氢键。电化学性能测试结果表明,配合物1对氧还原反应具有电催化活性。     

以5-(3-吡啶基)-1H-吡唑-3-羧酸为配体的钴共晶配合物的合成、晶体结构及电化学性质

采用溶剂热法合成了一种新型的钴（Ⅱ）基配合物,即{[Co（Hppc）₂][Co₂（4,4''-bipy）（H₂O）₄]（SO₄）₂·2H₂O}_n （1）,其中H₂ppc=5-（3-吡啶基）-1H-吡唑-3-羧酸,4,4''-bipy=4, 4''-联吡啶。配体H₂ppc是由吡啶环、吡唑环和羧基共同组成,同时兼具了刚性和柔性。通过单晶X射线衍射对配合物1进行了结构测定。结果显示所合成的配合物1结晶在单斜晶系C2/c空间群,包括2个晶体学独立部分：二维层状[Co（Hppc）₂]和一维链状[Co₂（4,4''-bipy）（H₂O）₄]^2-,并形成具有{4⁴·6²}{4}₂拓扑网络结构的共晶化合物。此外,配合物1呈现出良好的电化学发光（ECL）性能以及良好的超级电容器性能。     

基于3，3′，4，4′-四羧基偶氮苯构筑的三个金属配合物的合成、晶体结构及性质

在水热条件下利用H₄ddb配体合成了3个过渡金属配合物[Co₂（ddb）（phen）₂（H₂O）₆]·3H₂O（1）,[Co（ddb）_0.5（bpy）_0.5（H₂O）₃]_n（2）和{[Ag（dpe）]·0.5（H₂ddb）·H₂O}_n（3）（H₄ddb=3,3'',4,4''-四羧基偶氮苯,bpy=4,4''-联吡啶,dpe=1,2-二（4-吡啶基乙烯））,并用元素分析、红外光谱、X射线粉末衍射、X射线单晶衍射对其进行了表征。配合物1为双核结构,基于丰富的氢键作用扩展形成三维超分子网结构。配合物2为基于钴离子通过ddb^4-配体以μ₄：η¹,η¹,η¹,η¹的配位模式连接而成的二维网结构。配合物3是由Ag（Ⅰ）离子与dpe配体形成的直链结构,客体分子H₂ddb^2-通过氢键作用将其扩展为三维超分子结构。此外还研究了配合物1~3的荧光性质和热稳定性。     

以苯四甲酸和双(咪唑基甲基)苯为配体的三维Cd-MOF材料的合成、结构及荧光性质

选择刚性的1,2,4,5-均苯四甲酸（H₄L）为主配体,以1,3-双（1H-咪唑-1-基甲基）苯（1,3-bib）为辅助配体,在水热条件下,与过渡金属离子Cd²⁺配位合成了配合物[Cd（L）_0.5（1,3-bib）（H₂O）]·H₂O（1）。利用元素分析、红外光谱、X射线单晶衍射、热重和X射线粉末衍射对其结构进行了表征,并研究了化合物的荧光性质。结果表明：配合物1属正交晶系,空间群Pbca,a=0.857 08（4）nm,b=1.912 23（10）nm,c=2.451 60（12）nm。配合物1中Cd²⁺与L^4-配体的羧基通过双齿螯合配位,通过1,3-bib连接形成三维网状结构。配合物1具有较强的荧光,其对丙酮溶剂、MnO₄^-、Hg²⁺离子有一定的荧光猝灭。     

基于6-(3，5-二羧基苯基)烟酸金属有机配位聚合物的构筑及其荧光识别性能

利用混合配体设计、合成了2种新颖的金属有机配位聚合物：[Cd（HDCPN）（1,4-bib）_0.5（H₂O）₂]_n（1）和{[Zn（HDCPN）（1,2bimb）]·H₂O}_n（2）（H₃DCPN=6-（3,5-二羧基苯基）烟酸,1,4-bib=1,4-二（1-咪唑基）苯,1,2-bimb=1,2-二（咪唑-1-基甲基）苯）,并通过单晶X射线衍射、红外光谱（IR）、热重分析（TG）和粉末衍射对配合物1和2进行结构表征。结构分析表明1和2都显示一维链结构,并通过π…π作用堆积成三维网络空间结构。进一步研究了配合物1和2的荧光性能及1在水溶液中对阳离子和阴离子的识别。荧光检测显示,配合物1在水溶液中高灵敏识别Fe³⁺、Cr₂O₇^2-和CrO₄^2-离子。同时研究了配合物1对Fe³⁺、Cr₂O₇^2-和CrO₄^2-的荧光猝灭机理。     

基于二羧基二苄胺和二咪唑基联苯的钴(Ⅱ)配位聚合物的合成、结构及对水中Fe3+的检测

在水热条件下,合成了一例新Co（Ⅱ）基配位聚合物{[Co（H₃bcba）（bdmi）]·H₂O}_n（1）,其中H₃bcba为4,4''-二羧基N,N-二苄胺,bdmi为4,4''-二（2-甲基-1H-咪唑基）联苯。对它的结构进行了单晶X射线衍射、红外光谱、元素分析、热重分析和Hirshfeld表面分析。X射线衍射晶体学分析表明,部分去质子化的H₃bcba配体的2个羧基采取弯曲的双齿螯合模式配位2个钴（Ⅱ）离子,而中性配体bdmi在1中充当μ₂桥连配体,形成二维4-连接（4,4）聚合网格框架拓扑结构。在晶体结构中,由O-H…O和N-H…O氢键、C-H…O和C-H…N相互作用以及C-H…π堆积的共同作用进一步构筑形成了三维超分子结构。在常温下,1表现出强的固态荧光性能。在水溶液中,1通过荧光猝灭效应,展现出对Fe³⁺离子的高选择性和识别性能。     

3,5-二(2',5'-苯二羧酸)苯甲酸构筑的金属有机配合物的荧光识别及磁性

设计合成了3种新颖的金属有机配合物（MOCs）：{[Pb₂（HL）（phen）]·2H₂O}_n（1）,{[Ni（H₃L）（4,4''-bipy）_1.5（H₂O）₄]·6H₂O}_n（2）和{[Ni₂（HL）（1,4-bibb）（H₂O）]·（CH₃CN）·H₂O}_n（3）（H₅L=3,5-二（2'',5''-苯二羧酸）苯甲酸,phen=1,10-菲咯啉,4,4''-bipy=4,4''-联吡啶,1,4-bibb=1,4-二（苯并咪唑）苯）,并通过单晶X射线衍射、红外光谱（IR）、热重分析（TG）和粉末衍射对它们进行结构表征。结构分析表明1是基于[Pb₂（μ₂-COO）₂（μ₁-COO）₄]SBUs的一维链状结构;2是二维层状结构,其拓扑符号为{4.6²}₂{4².6².8²};3是一个3D网络结构,其拓扑符号为{6².8⁴}{6⁴.8²}₂。进一步研究了配合物荧光和磁性能。荧光检测显示,配合物1在水溶液中可以高灵敏识别Fe³⁺和Cr₂O₇^2-离子。同时研究了配合物1对Fe³⁺和Cr₂O₇^2-猝灭机理。磁性分析表明配合物3中的Ni（Ⅱ）离子之间存在反铁磁相互作用。     

以5-(3-吡啶基)-1H-吡唑-3-羧酸为配体的钴共晶配合物的合成、晶体结构及电化学性质

采用溶剂热法合成了一种新型的钴(Ⅱ)基配合物,即{[Co(Hppc)₂][Co₂(4,4''-bipy)(H₂O)₄](SO₄)₂·2H₂O}_n (1),其中H₂ppc=5-(3-吡啶基)-1H-吡唑-3-羧酸,4,4''-bipy=4,4''-联吡啶。配体H₂ppc是由吡啶环、吡唑环和羧基共同组成,同时兼具了刚性和柔性。通过单晶X射线衍射对配合物1进行了结构测定。结果显示所合成的配合物1结晶在单斜晶系C2/c空间群,包括2个晶体学独立部分：二维层状[Co(Hppc)₂]和一维链状[Co₂(4,4''-bipy)(H₂O)₄]^2-,并形成具有{4⁴·6²}{4}₂拓扑网络结构的共晶化合物。此外,配合物1呈现出良好的电化学发光(ECL)性能以及良好的超级电容器性能。     

三个基于1,5-二(2-乙基苯并咪唑基)-戊烷柔性配体的镉配合物

通过设计柔性配体1,5-二（2-乙基苯并咪唑基）戊烷（bep）,在二羧酸辅助配体的调控下成功制备了3个配位聚合物[Cd（bep）（sba）]_n（1）,[Cd（bep）（bda）]_n（2）,and{[Cd₂（bep）（ada）₂]·H₂O}_n（3）（H₂sba=4,4’-磺酰基二苯甲酸,H₂bda=4,4’-联苯二甲酸,H₂ada=1,3-金刚烷二乙酸）。配合物均呈现二维层状结构。配合物1由交替的Cd（Ⅱ）/bep/sba^2-螺旋链构成。配合物2由Cd/bda^2-单元构成二维结构,bep作为单齿配体与Cd（Ⅱ）配位。配合物3的二维层通过Cd/ada^2-/H₂O氢键螺旋链拓展成三维超分子。此外,对配合物1~3的粉末X射线衍射、热稳定性以及荧光性质进行了研究。     

三个基于1，5-二(2-乙基苯并咪唑基)-戊烷柔性配体的镉配合物

通过设计柔性配体1,5-二（2-乙基苯并咪唑基）戊烷（bep）,在二羧酸辅助配体的调控下成功制备了3个配位聚合物[Cd（bep）（sba）]_n（1）,[Cd（bep）（bda）]_n（2）,and{[Cd₂（bep）（ada）₂]·H₂O}_n（3）（H₂sba=4,4’-磺酰基二苯甲酸,H₂bda=4,4’-联苯二甲酸,H₂ada=1,3-金刚烷二乙酸）。配合物均呈现二维层状结构。配合物1由交替的Cd（Ⅱ）/bep/sba^2-螺旋链构成。配合物2由Cd/bda^2-单元构成二维结构,bep作为单齿配体与Cd（Ⅱ）配位。配合物3的二维层通过Cd/ada^2-/H₂O氢键螺旋链拓展成三维超分子。此外,对配合物1~3的粉末X射线衍射、热稳定性以及荧光性质进行了研究。     

Furyl- and thienyl-silatranes and germatranes

We review our research on the synthesis and study of the physical and biological properties of furyl- and thienylgermatranes and -silatranes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 725–732, June, 1992.     

Review and patents and literature

The use of the insect cell/baculovirus expression system for producing recombinant proteins of bacterial, plant, insect, and mammalian origin has become widespread. The popularity of this eukaryotic expression system is due to many factors, including (1) potentially high protein expression levels, (2) ease and speed of genetic engineering, (3) ability to accommodate large DNA inserts, (4) protein processing similar to higher eukaryotic cells (e.g., mammalian cells), and (5) ease of insect cell growth (e.g., suspension growth). The following review of the literature discusses two engineering aspects of recombinant protein synthesis by insect cell cultures: bioreactor scale-up and insect cell line selection. Following this review patent abstracts and additional literature pertaining to expression of recombinant proteins in insect cell culture are listed.     

Ground- and excited-state aromaticity and antiaromaticity in benzene and cyclobutadiene

The aromaticity and antiaromaticity of the ground state (S 0), lowest triplet state (T 1), and first singlet excited state (S 1) of benzene, and the ground states (S 0), lowest triplet states (T 1), and the first and second singlet excited states (S 1 and S 2) of square and rectangular cyclobutadiene are assessed using various magnetic criteria including nucleus-independent chemical shifts (NICS), proton shieldings, and magnetic susceptibilities calculated using complete-active-space self-consistent field (CASSCF) wave functions constructed from gauge-including atomic orbitals (GIAOs). These magnetic criteria strongly suggest that, in contrast to the well-known aromaticity of the S 0 state of benzene, the T 1 and S 1 states of this molecule are antiaromatic. In square cyclobutadiene, which is shown to be considerably more antiaromatic than rectangular cyclobutadiene, the magnetic properties of the T 1 and S 1 states allow these to be classified as aromatic. According to the computed magnetic criteria, the T 1 state of rectangular cyclobutadiene is still aromatic, but the S 1 state is antiaromatic, just as the S 2 state of square cyclobutadiene; the S 2 state of rectangular cyclobutadiene is nonaromatic. The results demonstrate that the well-known "triplet aromaticity" of cyclic conjugated hydrocarbons represents a particular case of a broader concept of excited-state aromaticity and antiaromaticity. It is shown that while electronic excitation may lead to increased nuclear shieldings in certain low-lying electronic states, in general its main effect can be expected to be nuclear deshielding, which can be substantial for heavier nuclei.     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

Syntheses and structures of P-anilino-P-chalcogeno- and P-anilino-P-iminodiazasilaphosphetidines and their group 12 and 13 metal compounds

The P-anilino-P-chalcogeno(imino)diazasilaphosphetidines [Me(2)Si(mu-N(t)Bu)(2)P=E(NHPh)] (E = O (3), S (4), Se (5), N-p-tolyl (6)) were synthesized by oxidizing the P-anilinodiazasilaphosphetidine [Me(2)Si(N(t)Bu)(2)P(NHPh)] (2) with cumene hydroperoxide, sulfur, selenium, and p-tolyl azide, respectively. The lithium salt of 4 reacted with thallium monochloride to produce ([Me(2)Si(mu-N(t)Bu)(2)P=S(NPh)-kappaN-kappaS]Tl)(7), which features a two-coordinate thallium atom. Treatment of 4-6 with AlMe(3) gave the monoligand dimethylaluminum complexes ([Me(2)Si(mu-N(t)Bu)(2)P=E(NPh)-kappaN-kappaE]AlMe(2)) (E = S (8), Se (9), N-p-tolyl (10)), respectively. In these complexes the aluminum atom is tetrahedrally coordinated by one chelating ligand and two methyl groups, as a single-crystal X-ray analysis of 8 showed. A 2 equiv amount of 4-6 reacted with diethylzinc to produce the homoleptic diligand complexes ([Me(2)Si(mu-N(t)Bu)(2)P=E(NPh)-kappaN-kappaE](2)Zn)(E = S (11), Se (12), N-p-tolyl (13)). A crystal-structure analysis of 11 revealed a linear tetraspirocycle with a tetrahedrally coordinated, central zinc atom.     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...