Disposable Immunosensor for Escherichia Coli O157:H7 Based on a Multi-Walled Carbon Nanotube-Sodium Alginate Nanocomposite Film Modified Screen-Printed Carbon Electrode

A disposable immunosensor for the detection of Escherichia coli O157:H7 based on a multiwalled carbon nanotube–sodium alginate nanocomposite film was constructed. The nanocomposite was placed on a screen-printed carbon electrode, and horseradish peroxidase-labeled antibodies were immobilized to E. coli O157:H7 on the modified electrode to construct the immunosensor. The modification procedure was characterized by atomic force microscopy and cyclic voltammetry. Under optimal conditions, the proposed immunosensor exhibited good electrochemical sensitivity to E. coli O157:H7 in a concentration range of 10³–10¹⁰ cfu/mL, with a relatively low detection limit of 2.94 × 10² cfu/mL (S/N = 3). This immunosensor exhibited satisfactory specificity, reproducibility, stability, and accuracy, making it a potential alternative tool for early assessment of E. coli O157:H7.     

Determination of L‐Vesamicol in Serum Samples Using Enantioselective,Potentiometric Membrane Electrodes Based on Antibiotics

Abstract

Enantioselective, potentiometric membrane electrodes (EPMEs) based on antibiotics are proposed for the enantioanalysis of L‐vesamicol. A carbon paste was modified with antibiotics (vancomycin, teicoplanin, and teicoplanin modified with acetonitrile), as chiral selectors. The EPMEs based on antibiotics were reliably used for enantiopurity tests of L‐vesamicol using the direct potentiometric technique. The following linear concentration ranges: 1.0×10^?6–1.0×10^?4, 1.0×10^?6–1×10^?3 and 1×10^?7?1×10^?2 mol/L; and detection limits: 1.1×10^?7, 9.6×10^?8, and 3.6×10^?8 mol/L were determine for vancomycin, teicoplanin, and teicoplanin modified with acetonitrile–based EPMEs, respectively. The proposed EPMEs were applied for the enantioanalysis of L‐vesamicol in urine samples.     

Flow injection determination of hydrogen peroxide using diperiodatoargentate- and diperiodatonickelate-luminol chemiluminescence

A novel chemiluminescence (CL) method for the determination of hydrogen peroxide is described. Method is based on the transition metals in highest oxidation state complex, which include diperiodatoargentate (DPA) and diperiodatonickelate (DPN) and show excellent sensitisation on the luminol-H₂O₂ CL reaction with low luminol concentration in alkaline medium. In particular, the sensitiser which was previously reported (such as Co²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Fe³⁺, Cr³⁺, KIO₄, K₃Fe(CN)₆ etc.) to be unobserved CL due to poor sensitisation with such low concentration of luminol which makes the method hold high selectivity. Based on this observation, the detection limits were 6.5?×?10^?9?mol?L^?1 and 1.1?×?10^?8?mol?L^?1 hydrogen peroxide for the DPN- and DPA-luminol CL systems, respectively. The relative CL intensity was linear with the hydrogen peroxide concentration in the range of 2.0?×?10^?8–6.0?×?10^?6?mol?L^?1 and 4.0?×?10^?8–4.0?×?10^?6?mol?L^?1 for the DPN- and DPA-luminol CL systems, respectively. The proposed method had good reproducibility with a relative standard deviation of 3.4% (8.0?×?10^?7?mol?L^?1, n?=?7) and 1.0% (2.0?×?10^?6?mol?L^?1, n?=?7) for the DPN- and DPA-luminol CL systems, respectively. A satisfactory result has been gained for the determination of H₂O₂ in rainwater and artificial lake water by use of the proposed method.     

Electrochemical determination of norepinephrine on the membrane of silver nanoparticles doped poly-glycine eliminating the interference of ascorbic acid

The silver nanoparticles doped poly-glycine composite membrane was prepared by cyclic voltammetry on the surface of the glassy carbon electrode (GCE). The morphology and electrochemical properties were characterized by scanning electron microscopy and cyclic voltammetry, respectively, and in detail, the electrochemical behaviors of the norepinephrine (NE) on this membrane were studied. The results showed that the membrane had good catalytic properties for the oxidative–reductive reaction of NE. NE had a couple of sensitive oxidative-reductive current peaks. The reductive peak currents were linearly with its concentration in the range of 1.90?×?10^?7 to 7.00?×?10^?6 and 7.00?×?10^?6 to 1.00?×?10^?4?mol l^?1, and the linear regressive equations were i _pc (A)?=?3.73?×?10^?6?+?0.70C (mol l^?1), i _pc (A)?=?9.83?×?10^?5?+?0.12C (mol l^?1), respectively, with the relate coefficient (r) of 0.9926 and 0.9944. The detection limit was 1.2?×?10^?7?mol l^?1 (S/N?=?3), which could be used to determine the content of NE and at the same time, eliminate the interference of the ascorbic acid (AA). The proposed method had high sensitivity, good selectivity and stability.     

Label-free capacitive immunosensor based on quartz crystal Au electrode for rapid and sensitive detection of Escherichia coli O157:H7

A label-free capacitive immunosensor based on quartz crystal Au electrode was developed for rapid and sensitive detection of Escherichia coli O157:H7. The immunosensor was fabricated by immobilizing affinity-purified anti-E. coli O157:H7 antibodies onto self-assembled monolayers (SAMs) of 3-mercaptopropionic acid (MPA) on the surface of a quartz crystal Au electrode. Bacteria suspended in solution became attached to the immobilized antibodies when the immunosensor was tested in liquid samples. The change in capacitance caused by the bacteria was directly measured by an electrochemical detector. An equivalent circuit was introduced to simulate the capacitive immunosensor. The immunosensor was evaluated for E. coli O157:H7 detection in pure culture and inoculated food samples. The experimental results indicated that the capacitance change was linearly correlated with the cell concentration of E. coli O157:H7. The immunosensor was able to discriminate between cellular concentrations of 10²–10⁵ cfu mL⁻¹ and has applications in detecting pathogens in food samples. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were also employed to characterize the stepwise assembly of the immunosensor.     

Magnetic Nanohybrids Loaded with Bimetal Core–Shell–Shell Nanorods for Bacteria Capture,Separation, and Near‐Infrared Photothermal Treatment

A novel antimicrobial nanohybrid based on near‐infrared (NIR) photothermal conversion is designed for bacteria capture, separation, and sterilization (killing). Positively charged magnetic reduced graphene oxide with modification by polyethylenimine (rGO–Fe₃O₄–PEI) is prepared and then loaded with core–shell–shell Au–Ag–Au nanorods to construct the nanohybrid rGO–Fe₃O₄–Au–Ag–Au. NIR laser irradiation melts the outer Au shell and exposes the inner Ag shell, which facilitates controlled release of the silver shell. The nanohybrids combine physical photothermal sterilization as a result of the outer Au shell with the antibacterial effect of the inner Ag shell. In addition, the nanohybrid exhibits high heat conductivity because of the rGO and rapid magnetic‐separation capability that is attributable to Fe₃O₄. The nanohybrid provides a significant improvement of bactericidal efficiency with respect to bare Au–Ag–Au nanorods and facilitates the isolation of bacteria from sample matrixes. A concentration of 25 μg mL^?1 of nanohybrid causes 100 % capture and separation of Escherichia coli O157:H7 (1×10⁸ cfu mL^?1) from an aqueous medium in 10 min. In addition, it causes a 22 °C temperature rise for the surrounding solution under NIR irradiation (785 nm, 50 mW cm^?2) for 10 min. With magnetic separation, 30 μg mL^?1 of nanohybrid results in a 100 % killing rate for E. coli O157:H7 cells. The facile bacteria separation and photothermal sterilization is potentially feasible for environmental and/or clinical treatment.     

Non-Newtonian flow curves including lower and upper Newtonian regions for dilute and moderately concentrated polystyrene solutions

The non-Newtonian viscosity in steady flow was measured for solutions of polystyrene (M?_w/M?_n = 1.1) in diethyl phthalate at 30.0°C. In the moderately concentrated solutions, from 6.03 × 10^?2 to 5.62 × 10^?1g/cm³, the viscosity data modified by frictional parameters fit the Graessley theoretical curve for a narrow distribution polymer. The dilute solutions, from 3.26 × 10^?3 to 1.57 × 10^?2 g/cm³, were nonentangled systems whose non-Newtonian properties could be explained by the excluded volume effect as proposed by Fixman. On the basis of the non-Newtonian data, it was concluded that the solution of 3.30 × 10^?2 g/cm³ was a lower critical entanglement concentration, which was distinguished from the usual higher critical concentration for entanglement. This lower critical concentration was also found in the concentration dependence of the activation energy of flow and the absorbance at 310 nm.     

基于酞菁铜衍生物为载体的电极对水杨酸根的选择性电位响应

本文以2,9,16,23-四硝基酞菁铜(II) (Cu(II)TNPc) 和2,9,16,23-四氨基酞菁铜(II) (Cu(II)TAPc) 为载体制备PVC聚合膜,构建了水杨酸根选择性电极,并探讨了该电极的选择性响应性能。研究了增塑剂的性质、载体的含量及阴、阳离子添加剂对电极电位响应的影响。结果表明,基于Cu(II)TNPc为载体的PVC膜电极对水杨酸根 (Sal－) 呈现出优先选择性电位响应。具有最佳电位响应的电极的膜组成是：(w/w) 3.0% Cu(II)TNPc,67.0% o-NPOE,29.5% PVC和0.5% NaTPB。基于该组成的电极的线性响应范围为1.0×10－1－9.0×10－7 mol·L－1,检测下限为7.2×10－7 mol·L-1,斜率为－59.8±0.5 mV/decade;其响应快速,稳定性好,适宜的pH范围是3.0－7.0。并成功运用于了实际样品中水杨酸含量的测定,获得令人满意的结果。     

Dual gold nanoparticle lateflow immunoassay for sensitive detection of Escherichia coli O157:H7

Two patterns of signal amplification lateral flow immunoassay (LFIA), which used anti-mouse secondary antibody-linked gold nanoparticle (AuNP) for dual AuNP-LFIA were developed. Escherichia coli O157:H7 was selected as the model analyte. In the signal amplification direct LFIA method, anti-mouse secondary antibody-linked AuNP (anti-mouse-Ab-AuNP) was mixed with sample solution in an ELISA well, after which it was added to LFIA, which already contained anti-E. coli O157:H7 monoclonal antibody-AuNP (anti-E. coli O157:H7-mAb-AuNP) dispersed in the conjugate pad. Polyclonal antibody was the test line, and anti-mouse secondary antibody was the control line in nitrocellulose (NC) membrane. In the signal amplification indirect LFIA method, anti-mouse-Ab-AuNP was mixed with sample solution and anti-E. coli O157:H7-mAb-AuNP complex in ELISA well, creating a dual AuNP complex. This complex was added to LFIA, which had a polyclonal antibody as the test line and secondary antibody as the control line in NC membrane. The detection sensitivity of both LFIAs improved 100-fold and reached 1.14 × 10³ CFU mL⁻¹. The 28 nm and 45 nm AuNPs were demonstrated to be the optimal dual AuNP pairs. Signal amplification LFIA was perfectly applied to the detection of milk samples with E. coli O157:H7 via naked eye observation.     

银（III）配合物-鲁米诺流动注射化学发光新体系测定肾上腺素

儿茶酚胺是一类非常重要的神经递质,在人体的心血管系统、神经系统、内分泌腺、肾脏、平滑肌等组织系统的生理活动中起着广泛的调节作用。肾上腺素为儿茶酚胺的一种,建立灵敏、高效的肾上腺素检测技术具有重要的临床意义。本文将银（Ⅲ）配合物与鲁米诺组成新的流动注射化学发光体系,利用碱性介质中肾上腺素对三价银配合物－鲁米诺化学发光体系有明显的增强效应来测定肾上腺素的含量,并据此建立了高效测定肾上腺素的流动注射化学发光新方法。在优化的条件下,该方法测定肾上腺素的线型范围为1.0×10－9～1.0×10－7 mol L-1,检出限为8.0×10－10 mol L-1,对1.5×10－8 mol L-1肾上腺素11次平行测定,其相对标偏差为2.9％。利用建立的分析方法测定了药物肾上腺素,并对三价银－鲁米诺化学发光新体系测定肾上腺素的反应机理进行了讨论。     

Determination of carbaryl by flow injection with luminol chemiluminescence inhibition detection

A flow-injection procedure is described for the determination of carbaryl based on its inhibition effect on luminol-cobalt(II) chemiluminescence reaction in alkaline medium in the presence of hydrogen peroxide. The calibration data over the range 5.0?×?10^?7 to 20?×?10^?6?M give a correlation coefficient (r ²) of 0.9972 with relative standard deviations (RSD; n?=?4) in the range of 1.0–2.1% with a limit of detection (3?×?blank noise) of 2.37?×?10^?7?M for carbaryl. The sample throughput was 120?h^?1. The effects of some carbamates, anions, and cations were studied on luminol CL system for carbaryl determination. The proposed method has been applied to determine carbaryl in natural waters.     

Thiocyanate-selective membrane electrode based on cobalt(III) Schiff base as a charge carrier

A highly selective polyvinylchloride (PVC) membrane electrode based on Schiff base complex i.e. [Cobalt (Salpen) (PBu₃)] ClO4 · H2O (Salpen = bis(salycilaldehyde)propylene diamine) is reported as new carrier for thiocyanate selective electrode by incorporating the membrane ingredients on the surface of graphite electrodes. The proposed electrode possesses a very wide Nernestian linear range to thiocyanate from 1.0 × 10^?6 to 1.0 × 10^?1 M with slope of ?59.05 ± 0.91 mV per decade of thiocyanate concentration, very low detection limit (8.0 × 10^?7 M) and good thiocyanate selectivity over the wide variety of other anions. Fast and stable response, good reproducibility, long-term stability, applicability over a wide pH range (2.8–9.8) are advantages of the reported electrode. The sensor has a response time of <5 s and can be used for at least 14 weeks without any considerable change in respective potential response. The proposed electrode was used for the determination of thiocyanate in saliva, wastewater and human urine with satisfactory results and good agreement with colorimetric as reference method.     

Development of a multichannel flow-through chemiluminescence microarray chip for parallel calibration and detection of pathogenic bacteria

Pathogen detection is important for health and safety reasons. Several outbreaks all over the world have shown the need for rapid, qualitative, quantitative, and, particularly, multianalyte detection systems. Hence, a multichannel flow-through chemiluminescence microarray chip for parallel detection of pathogenic bacteria was developed. The disposable chip made of acrylonitrile–butadiene–styrene (ABS) copolymer was devised as a support for a multiplexed sandwich immunoassay. Calibration and measurement was possible in one experiment, because the developed chip contains six parallel flow-through microchannels. Polyclonal antibodies against the pathogenic bacteria Escherichia coli O157:H7, Salmonella typhimurium, and Legionella pneumophila were immobilized on the chip by microcontact printing in order to use them as specific receptors. Detection of the captured bacteria was carried out by use of specific detection antibodies labelled with biotin and horseradish peroxidase (HRP)–streptavidine conjugates. The enzyme HRP generates chemiluminescence after adding luminol and hydrogen peroxide. This signal was observed by use of a sensitive CCD camera. The limits of detection are 1.8 × 10⁴ cells mL⁻¹ for E. coli O157:H7, 7.9 × 10⁴ cells mL⁻¹ for L. pneumophila, and 2.0 × 10⁷ cells mL⁻¹ for S. typhimurium. The overall assay time for measurement and calibration is 18 min, enabling very fast analysis.      

Determination of Hydrogen Peroxide by Electrochemiluminescence Using a Chitosan–graphene Composite Film Doped Cadmium-Tellurium Quantum Dot Modified Glassy Carbon Electrode

Here is reported the novel determination of hydrogen peroxide by electrochemiluminescence using a chitosan–graphene composite film doped cadmium-tellurium quantum dot modified glassy carbon electrode. The cadmium-tellurium quantum dots were studied by absorption and fluorescence spectroscopy. Scanning electron microscopy and electrochemical impedance spectroscopy were used to characterize the structure morphology of the composite matrix. The electrochemiluminescence emission was linear with the concentration of hydrogen peroxide in the range of 3.5?×?10^?7 to 1.1?×?10^?5?M with a determination limit of 2.1?×?10^?7?M. Furthermore, the modified electrode showed excellent reproducibility and stability.     

Electrochemical oxidation determination and voltammetric behaviour of 4-nitrophenol based on Cu2O nanoparticles modified glassy carbon electrode

Cu₂O nanoparticles (nano-Cu₂O) modified glassy carbon electrode (GCE) was fabricated and used to investigate the electrochemical behaviour of 4-nitrophenol (4-NP) by cyclic voltammetry (CV), chronoamperometry (CA), chronocoulometry (CC) and differential pulse voltammetry (DPV). Compared with GCE, a remarkable increase in oxidation peak current was observed. It indicates that nano-Cu₂O exhibits remarkable enhancement effect on the electrochemical oxidation of 4-NP. Under the optimised experimental conditions, the oxidation peak currents were propotional to 4-NP concentration in the range from 1.0?×?10^?6 to 4.0?×?10^?4?mol?L^?1 with a detection limit of 5.0?×?10^?7?mol?L^?1 (S/N?=?3). The fabricated electrode presented good repeatability, stability and anti-interference. Finally, the proposed method was applied to determine 4-NP in water samples. The recoveries for these samples were from 94.60% to 105.5%.     

HTFFR kinetics studies: A chemiluminescence titration method for the determination of absolutes Sn concentrations

Absolute gas phase Sn concentrations in the range 1 × 10¹³ ? [Sn] ? 1 × 10¹⁴ ml^?1 have been determined utilizing a technique based on the rapid (at T ? 900 K) titration reaction Sn + NO₂ → SnO + NO (k(900–1100 K) ≈ 1 × 10^?10 ml molecule^?1 s^?1) and the chemiluminescent indicator reaction Sn + N₂O → SnO + N₂ + hv(SnO a³ Σ-X¹Σ).     

Adsorptive stripping voltammetry of nickel at a bare glassy carbon electrode

A bare glassy carbon electrode is applied to nickel determination by adsorptive stripping voltammetry in the presence of dimethylglyoxime as a complexing agent. A procedure of nickel determination and electrode regeneration was proposed. The calibration graph for Ni(II) for an accumulation time of 120?s was linear from 2?×?10^?9 to 1?×?10^?7?mol?L^?1. The detection limit was 8.2?×?10^?10?mol?L^?1. The relative standard deviation for a solution containing 2?×?10^?8?mol?L^?1 of Ni(II) was 4.1%. The proposed procedure was applied for Ni(II) determination in certified water reference materials.     

Development of a Novel Automatic Potentiometric System for Determination of Selenium and Its Application in Pharmaceutical Formulations and Anodic Slime

Poly(vinyl chloride) polymeric membrane sensors containing Sn(IV) phthalocyanine dichloride (SnPC) and Co(II) phthalocyanine (CoPC) as novel electroactive materials dispersed in o‐nitrophenyl octylether (o‐NPOE) as a plasticizer are examined potentiometrically with respect to their response toward selenite (SeO₃^2?) ions. Fast Nernstian response for SeO₃^2? ions over the concentration ranges 7.0×10^?6–1.0×10^?3 and 8.0×10^?6–1.0×10^?3 mol L^?l at pH 3.5–8.5 with lower detection limit of 5.0×10^?6 and 8.0×10^?6 mol L^?1 and calibration slopes of ?25.4 and ?29.7 mV decade^?1 are obtained with SnPC and CoPC based membrane sensors, respectively. The proposed sensors reveals by the modified separate solution method (MSSM) a good selectivity over different anions which differ significantly from the classical Hofmeister series. A segmented sandwich membrane method is used to determine complex formation constants of the ionophores in situe in the solvent polymeric sensing membranes. Membrane incorporating CoPC in a tubular flow detector is used in a two channels flow injection set up for continuous monitoring of selenite at a frequency of ca. 50 samples h^?1. Direct determination of selenium in pharmaceutical formulations and anodic slime gives results in good agreement with data obtained using standard ICP method.     

Synthesis and biological activities of substituted dihydrobenzo[h]-pyrimido[4,5-b]quinolines as tetracyclic 5-deaza nonclassical folates

Novel tetracyclic compounds 1–4 have been synthesized via a regiospecific cyclocondensation reaction between substituted 6-aminopyrimidines 5– 7 and chlorovinyl aldehydes 13 and 14 . The linear structures of these compounds were established by ¹H nmr and ¹³C nmr spectral data and also by synthesis of the compounds via an unambiguous route. The growth of Manca human lymphoma cells was inhibited 50% by 1 and 4 at 4.5 × 10^?6 M and 1.2 × 10^?6 M respectively. These compounds also inhibited human dihydrofolate reductase (DHFR)by 50% at 4.4 × 10^?6 M and 1.4 × 10^?6 irrespectively and L. casei DHFR at 1.9 × 10^?5 M and 1.1 × 10^?5 M respectively. Compound 16 , a positional isomer of 1 , was the most potent of the compounds studied, it inhibited the growth of Manca human lymphoma cells by 50% at 9 × 10^?8 M. The IC₅₀ values of 16 for the inhibition of human DHFR and L. casei DHFR were 8 × 10^?8 M and 1.9 × 10^?5 M respectively.     

Cobalt(II)-selective membrane electrode based on N,N′-di(thiazol-2-yl)formimidamide

A new PVC-membrane electrode for Co²⁺ ions based on N,N′-di(thiazol-2-yl)formimidamide (TF) as membrane carrier has been developed. The electrode resulted in Nernstian response (29.5?±?0.4?mV decade^?1) for Co²⁺ ion over a wide concentration range (2.5?×?10^?7 ?1.0?×?10^?1?M) with a detection limit of 6.1?×?10^?8?M. The sensor has a response time of about 10?s, and can be used for at least 2 months without observing any deviation from the Nernstain response. The electrode revealed good selectivity towards cobalt(II) ion over a wide variety of alkali, alkaline earth, transition, and heavy metal ions and could be used in the pH range 2.0–7.0. The electrode was used for determination of Co²⁺ in real samples.