Extractive Determination of Vanadium in Fungi Samples

A new reagent system has been reported for the extractive separation and simultaneous spectrophotometric de termination of vanadium (V). The method is based on the formation of a water in soluble blue‐violet V(V) complex with N‐hydroxy‐N‐m‐tolyl‐N′‐phenylbenzamidine (HTPBA), and neutral surfactant Triton X‐100 into chloroform over an acidity range of 1.0–10.0 M acetic acid. The complex shows a broad absorption maximum at 570 nm, when measured against a chloroform blank. The λ_max (570 nm) of the complex and that of re agent (313 nm) are well separated, hence the excess of the reagent does not interfere in the spectrophotometric de termination of the metal. The molar absorptivity (?) of the complex is (4.74) × 10³ 1 mol^?1 cm^?1. The linearity of the calibration curve is followed between 0.5–12.0 μg mL^?1 with slope, intercept and correlation coefficient of 9.16× 10^?2, 4.5 × 10^?3 and 0.999, respectively. The detection limit of the method is 45 μgl^?1. The proposed re agent system provides significantly higher tolerance limit for iron (500 μg mL^?1) and also various metalions commonly associated with vanadium did not interfere. The method was applied for the deter mi nation of vanadium content of three samples i.e. Spirogyra, Puccinia and Riccia.     

Extraction Spectrophotometric Determination of Vanadium in Industrial Waste Water

A new and simple extraction spectrophotometric method for the determination of vanadium(V) with KIO₄, N‐phenylbenzohydroxamic acid (PBHA) and crystal violet (CV), in industrial waste water samples is described. It is based on the extraction of mixed‐ligand complex V(V)‐IO₄^? ‐PBHA‐CV⁺ into chloroform solution over 2‐7 MHC1. The molar absorptivity of the complex is (7.20) × 10³1 mol^?1 cm^?1 at λ_max 535 nm. The detection limit of the method is 44 μg 1^?1 V. The linearity of the calibration curve is followed up to 6 μgmL^?1 in the organic solution with slope, intercept and correlation coefficient of 1.34 × 10^?1, 6.7 × 10^?3 and +0.99, respectively. This method enhances the sensitivity of the conventional PBHA method for the determination of vanadium, and is free from interferences of other metal ions commonly associated with vanadium. The method has been successfully tested for the determination of V in the industrial waste water samples.     

Spectrophotometric determination of vanadium(V) as a mixed thiocyanate-4-pyridone complex

The spectrophotometric determination of vanadium(V) as a mixed thiocyanate-3-hydroxy-2-methyl-1-phenyl-4-pyridone (HX) complex and as a mixed thiocyanate-3-hydroxy-2-methyl-1-(4-tolyl)-4-pyridone (HY) complex is described. The extracted complexes in chloroform have a maximum absorbance at 450 and 650 nm. The optimal conditions for the extraction and spectrophotometric determination of vanadium(V) are determined. The solutions of the V-SCN-HX and V-SCN-HY complexes in chloroform obey Beer's law in the range 1–10 ppm of vanadium, and are stable for at least 24 hr. The molar absorptivity of the method is 6.8 × 10³ liters mol^?1 cm^?1. The molar ratio V:SCN:HX (HY) of the extracted complex is 1:1:2.     

Trace Analysis of Vanadium in Environment as its Ternary Complex with N-p Methoxyphenyl-2-Furylacrylohydroxamic Acid and 3-(o-Carboxyphenyl)-1-Phenyltriazine-N-Oxide

Abstract

A method is presented for the highly sensitive, selective, and rapid determination of vanadium (V) at sub-microgram levels in rocks, animal tissues, plant tissues and natural waters. The method is based on the selective extraction of vanadium (V) from strongly acidic (3-8 M hydrochloric acid) medium with solution of N-p-methoxyphenyl-2-furylacrylohydroxamic acid (MFHA) in chloroform. The reddish-violet extract (molar absorbance 8.6x10³ 1 mole^?1 cm^?1 at λ max 545 nm) is then equilibrated with 3-(o-carboxyphenyl)-1-phenyltriazine-N-oxide (CPPTNO) at pH = 1.5. The resulting ternary complex has enhanced colour (molar absorbance 1.4 × 10⁴ 1 mole^?1 cm^?1 at Λ max 450 nm). The ternary system obeys Beer's Law at 450 nm over the range 0-18 μ g/ml of vanadium. The extraction system achieves 20-fold enrichment of vanadium and enables the determination of the metal down to parts per billion (ng 1^?1) levels. The method tolerates the presence of a large number of anions and cations which are normally present with vanadium in rocks, plant tissues, animal tissues and natural waters. The applicability of the method was tested by the analysis of vanadium in these matrices. MFHA was selected from nine hydroxamic acids as it provided maximum sensitivity and selectivity.     

Determination of Vanadium with Chlorosubstituted Hydroxamic Acids for Photometric and Atomic Absorption Spectrophotometric Determination

Abstract

The eight newly synthesized chlorosubstituted hydroxamic acids are described for the extraction and spectrophotometric determination of vanadium. The sensitive and selective reagent, N-m-Chlorophenylpalmito hydroxamic acid, (m-CPPHA), which gives violet coloured vanadium complex was extracted with chloroform from 6M HCl. The violet coloured complex thus obtained has a maximum absorbance at 520 nm and molar absorptivity 4.9 ± 10³1mol^?1cm^?1. The Beer's law obeyed in the region 0.50-12.0ppm. Effects of acidity, reagent concentration, diverse ions have also been investigated. A comparison has been made with atomic absorption spectrophotometric method. Vanadium has been determined in the environment, e.g. plant, soil, rock, etc.     

Indirect Spectrophotometric Determination of Vanadium(IV) by Flow Injection Analysis Based on the Redox Reaction with Copper(II) in the Presence of Neocuproine

Abstract

An indirect photometric method with a continuous-flow analysis is presented for the determination of trace amounts of vanadium(IV). It is based on the redox reaction of copper(II) with vanadium(1V) in the presence of neocuproine. In the presence of neocuproine, copper(I1) is reduced easily by vanadium(I V) to a copper(1)-neocuproine complex, which shows a n absorption maximum at 454 nm. By measuring t h e absorbance of the complex at this wavelength, vanadium(1V) in t h e range 2×10^?6 - 8 × mol dm^?5 mol dm^?3 can be determined at a rate of 120 samples h^?1. The fractional determination of vanadium(1V) and iron(I1) is also studied.     

The spectrophotometric determination of vanadium after extraction as vanadium(III) ferronate by tribenzylamine

Vanadium(III) obtained by dithionite reduction of vanadium(V) can be extracted as its ferron complex with tribenzylamine in chloroform from 0.05 M sulphuric acid. Vanadium (0–5 μg ml^-1) is determined spectrophotometrically at 430 nm with a sensitivity of 0.0028 μg V cm^-2. Al(III), Co(II), Ni(II), Fe(II, III), Hg(II), Si(IV), Be(II), Mg(II), Ca(II), Sr(II), Ba(II), Cr(VI, III), W(VI), Zn(II), U(VI), Mn(II). Pb(II), Cu(II), Cd(II) and Th(IV) do not interfere; only Mo(VI), Ti(IV), Zr(IV). Bi(V) and Sn(II) interfere. A single determination takes only 7 min. The extracted complex is V^III (R-3H.TBA)₃ where R = C₉H₄O₄NSI. The method is satisfactory for the determination of vanadium in steels, alum and other samples without preliminary separations.     

Analysis of Metal Ions in Environmental Samples - III Synergistic Determination of Vanadium (V) As its Mixed Complex with N-0-Methoxyphenyl-2-Thenohydroxamic Acid and 3-(0-Carboxyphenyl)-1-Phenyltriazine-N-0Xide

Abstract

A highly sensitive, selective, and rapid method for the spectrophotometry determination of vanadium(V) at trace levels is described. The method is based on the selective extraction of vanadium(v) from strongly acidic (3–6 M hydrochloric acid) met ium with solution of N-0-methoxyphenyl-2- thenohydroxamic acid (0MTHA) in chloroform. The extract is then equilibrated with 3-(0-carboxyohenyl)-1-phenyltriazine-N-oxide(CPPTNO) at pH ? 1.5 and the resulting colour is measured at 445 nm. The colour system obeys Beer's law over the range 0–20 -μg/ml of vanadium; the molar absorptivityat the wavelength of maximum absorption (445 nm), and the Sandell sensitivity of the method are 1.1 × 10⁴1. mole^?1 cm^?1 and 0.005 μg/ml respectively.     

Extractive Spectrqphotometric Determination of Vanadium Liith o-Aminobenzo-Hydroxamic Acid

Abstract

A new spectrophotometric method for vanadium determination is proposed. The method is based on the extraction in Adogen-toluene solution of the complex formed between V(V) and o-Aminobenzohydraxámic acid

The method allows determination of 50 to 110 μg of V(V). The error and the apparent molar absorptivity are 1.2% and 5.2 ± 10³ l.mol^?1. cm^?1 respectively. The interferences caused by foreign ions have been established. The method is applied with success to determination of vanadium in petroleum crudes.     

Mixed Ligand Complexes of Vanadium(V): Extraction With Some New Hydroxamic Acids and Application in Steel.,Rock and Environmental Anaysis

Abstract

Five new substitued hydroxamic acids are used for extraction and spectrophotometric determination of vanadium(V) in trace amounts. the binary complex of vanadium (V) with H-p-ciloropheny 1-3,4,5-trimethoxycinnamohdroxamic acid (PTCHA) and the mixed ligand complex of vanadium (V) with N-p-cinlorpheny-p-chlorophenoxyisobutyrohydroxamic acid (PP3HA) and thiocyanete were studied. The molar absorbtivities of the bluish violet vanadium(V) hydroxamate and mixed ligand complexes are 6.9 × 10³ and 1.1 × 10⁴ cm³ mol^?3 cm^?1, respectively. The vanadium is also determined with AAs and the method is applied for its determination in steel. alloy, rock and environmental samples.     

Solvent Extraction of Vanadium(V) as a Ternary Complex with N-Hydroxy-N-p-Chlorophenyl-N′-(2-Methyl-5-Chloro)-Phenyl-p-Toluamidine Hydrochloride and p-Chlorophenol

N-Hydroxy-N-p-chlorophenyl-N′-(2-methyl-5-chloro)-phenyl-p-toluamidine hydrochloride (HCPMCPTH) reacts with vanadium(V) to form a 1:2 (metal:reagent) blue-violet complex which can be quantitatively extracted into chloroform from acetic acid solutions. The deep blue adduct having 1:2:1 (V:HCPMCPTH:PCP) stoichiometry gets quantitatively extracted into chloroform from 0–2.5 M acetic acid media. The formation of the ternary complex has been made the basis for the development of a simple, rapid, sensitive and selective extractive-photometric method for the determination of microamounts of vanadium(V). The method has been applied to the determination of vanadium in steels.     

N-p-tolyl-2-furohydroxamic Acid as the Extracting and Spectrophotometric Reagent for Vanadium(V)

Abstract

A simple and rapid spectrophotometric determination of vanadium(V) is described. The vanadium-N-p-tolyl-2-furohydroxamic acid complex is extracted into chloroform form 6–8 molar hydrochloric acid solution. Maximum absorbance occurs at 540 nm and Beer's Law is obeyed over the range of 0–15 μg of vanadium in the organic phase. The molar absorptivity is 3.0 × 10³ mole^?1 cm^?1 at 540 nm.

Vanadium could be determined in high purity niobium and tantalum metals, cast iron, steel, non ferrous alloys and silicates. Vanadium could be determined in the presence of several commonly occurring cations.     

Kinetic Spectrophotometric Determination of Vanadium (V) Based on its Inhibitory Effect on the Thionine – Ascorbic Acid Reaction

ABSTRACT

A simple and sensitive kinetic method for the determination of vanadium(V) based on its inhibitory effect on the reduction of thionine by ascorbic acid at pH=5 is described. The reaction rate is monitored spectrophotometrically by measuring the decrease in absorbance of thionine at 598 nm after a fixed time (10 min). The calibration graph is linear in the range of 10 ? 120 ng ml^?1 of vanadium(V) and the detection limit is 6 ng ml^?1. The relative standard deviation (RSD) for 80 ng ml^?1 of V(V) was 0.96% (n=10). The method was successfully applied to the determination of vanadium in a certified reference sample.     

Solvent Extraction of Vanadium with α-Benzoin Oxime

The solvent extraction of vanadium by a chloroform solution of α-benzoin oxime was investigated. The most favorable condition for the extraction has been found in the pH rang of 1.8 to 3.0 in sulfate or chloride buffer solutions, but with better extraction efficiency when sulfate was used. A solution of 2×10^?2 M α-benzoin oxime in chloroform was used, and 1×10^?4 to 2×10^?2 M vanadium(V) was extracted favorably in about 89% yield by a single extraction, and in about 97% yield by a double extraction. The effects of shaking time, concentration of α-benzoin oxime, and diverse ions have also been investigated. Vanadium(V) can be readily extracted without interference in the presence of copper(II), aluminum(III), iron(III), silver(I), zirconium(IV), and chromium(III).     

N-hydroxy-N,N'-diphenylcinnamamidine (HDPCA) as a new reagent for extractive separation and photometric determination of vanadium(V)

N-hydroxy-N,N′-diphenylcinnamamidine (HDPCA) forms a blue-violet coloured 1:2 complex (metal:ligand) with vanadium(V), which can be quantitatively extracted into chloroform from 1.0–9.5M acetic acid medium. Based on this colour reaction, a sensitive and highly selective method for the spectrophotometric determination of microgram quantities of vanadium(V) has been developed. The complex shows maximum absorption at 570 nm and obeys Beer's law in the vanadium concentration range 0.6–12.5 μg/ml. The method has been applied to alloy steels.     

A Spectrophotometric Study of the Molybdenum(VI)-1-Pyrrolidinecarbodithioate System

Abstract

A spectrophotometric study of the molybdenum-1-pyrrolidinecarbodithioate complex has shown that the meta1:ligand ratio is 1;2. Both molybdenum(VI) and molybdenum(V) form complexes with almost identical absorption spectra. The conditional extraction constant for the molybdenum(VI)-1-pyrrolidinecarbodithioate in chloroform system has been evaluated as 6.3 × 10¹⁶.     

Speciation analysis of inorganic vanadium (V(IV)/V(V)) by graphite furnace atomic absorption spectrometry following ion-exchange separation

A sensitive and simple method of ion-exchange resin separation and graphite-furnace atomic absorption spectrometry (GFAAS) detection was proposed for the determination of inorganic vanadium species. Methylene Blue (MB) was used as a chelating agent of V(V) for ion-exchange separation. The complex of V(V) and MB could be trapped by ion-exchange resin at pH 3.0 and eluted by 1.0?mol?L^?1 NaOH. The vanadium species was determined subsequently by GFAAS. The concentration of V(IV) was calculated by subtracting the V(V) concentration from the total concentration of vanadium. Under the optimized experimental conditions, the detection limit of V(V) is 0.48?µg?L^?1 with RSD of 2.6% (n?=?5, c?=?2.0?µg?L^?1). In order to verify the accuracy of the method, a certified reference soil sample was analyzed, and the results obtained were in good agreement with the certified values. The range of recovery for V(IV) and V(V) was 97.8–99.3% and 101.7–103.6%, respectively. The proposed method was applied to the speciation analysis of vanadium in lake-water samples.     

A Rapid,Simple, and Sensitive Spectrophotometric Determination of Traces of Vanadium (V) in Foodstuffs,Alloy Steels,and Pharmaceutical,Water, Soil,and Urine Samples

Abstract

A rapid, simple, sensitive, and selective spectrophotometric method is investigated for the determination of traces of vanadium (V) in foodstuffs, alloy steels, and pharmaceutical, water, soil, and urine samples in aqueous DMF medium. The metal ion forms a green colored complex with 2-hydroxy-3-methoxy benzaldehyde thiosemicarbazone (HMBATSC) in an acidic buffer of pH 6.0. The green colored solution, having an absorbance maximum at 380 nm, is stable for more than 72 hours. Beer's law is obeyed in the range of 0.051–2.037 µg ml^?1. The molar absorptivity and Sandell's sensitivity of the method are found as 2.75 × 10⁴ l mol^?1 cm^?1 and 0.0018 µg cm^?2, respectively. The green colored complex has 1:2 [V(V)-HMBATSC] stoichiometry. The stability constant of the complex is determined as 3.267 × 10¹¹ by Job's method. The optimum reaction conditions and other analytical parameters are studied. A sensitive and selective second-order derivative spectrophotometry has also been proposed for the determination of V(V). The interference of various cations and anions are studied. The present method is successfully applied to the determination of vanadium (V) in foodstuffs, alloy steels, and pharmaceutical, water, soil, and urine samples.     

Extractive photometric determination of vanadium(V) as thiocyanato and azido mixed-ligand complexes with N-hydroxy-N-p-chlorophenyl-N'-(2-methyl-4-chlorophenyl) benzamidine hydrochloride

Ternary systems involving thiocyanate or azide (X) and N-hydroxy-N-p-chlorophenyl-N'-(2-methyl-4-chlorophenyl)benzamidine hydrochloride (HOAm) are used for the extraction-photometric determination of vanadium(V) as a VOX(2)(OAm)HOAm complex. A strong synergistic effect is observed. Mn(II), Cr(III), Ti(IV), Zr(IV), Mo(VI) and W(VI) do not interfere. The method has been applied to standard steel samples.     

Extract-Photometric Determination of Vanadium with Isophthaldihydroxamic Acid

Abstract

The spectrophotometric study of violet complex isophthaldihydroxamic acid-vanadium extracted into solution of trioctylmethylammonium chloride in ethylacetate was made (λ_max = 380 nm, ? = 7500 l.mol^?1.cm^?1; λ_max = 510 nm, ? = 5510 l.mol^?1 .cm^?1; stoichiometries, 1:1 and 1:2, V:reagent). A new method for the extract-spectrophotometric determination of V(V) in the range 14–80 μg of vanadium is proposed.