剪切流作用下层合梁非线性振动特性研究

针对剪切流中层合梁的大变形非线性振动问题, 采用高阶剪切变形锯齿理论和冯·卡门应变描述层合梁的变形模式和几何非线性效应, 构建了大变形层合梁非线性振动有限元数值模型; 采用基于任意拉格朗日?欧拉方法的有限体积法求解不可压缩黏性流体纳维-斯托克斯方程, 结合层合梁和流体的耦合界面条件建立了剪切流作用下层合梁流固耦合非线性动力学数值模型, 采用分区并行强耦合方法对层合梁的流致非线性振动响应进行了迭代计算. 研究了不同速度分布的剪切流作用下单层梁和多层复合材料梁的振动响应特性, 并验证了本文数值建模方法的有效性. 结果表明: 剪切流作用下单层梁的振动特性与均匀流作用下的情况不同, 梁的运动轨迹受剪切流影响向下偏斜, 随着速度分布系数增加, 尾部流场中的涡结构发生改变; 刚度比对剪切流作用下层合梁的振动特性有显著影响, 随着刚度比的增加, 层合梁振动的振幅增大, 主导频率下降, 运动轨迹由‘8’字形逐渐变得不对称; 发现了不同厚度比和铺层角度情况下, 层合梁存在定点稳定模式、周期极限环振动模式和非周期振动模式三种不同的振动模式, 改变层合梁铺层角度可实现层合梁周期极限环振动模式向非周期振动模式转变.      

Nonlinear dynamics of a viscoelastic beam traveling with pulsating speed,variable axial tension under two-frequency parametric excitations and internal resonance

This paper investigates nonlinear combined parametric transverse vibrations of a traveling viscoelastic beam. The combined parametric excitations originate from the time dependency of axial velocity as well as axial tension. Two parametric excitations are enforced into the system amid the internal resonance. Two-frequency parametric resonance is assumed to be comprised of combination parametric resonance of first two modes due to the time dependency of axial velocity, and the principal parametric resonance of first mode due to the variable tension in the axial direction in the presence of internal resonance for viscoelastic beam is considered for the first time. The higher-order integro-partial differential equation of motion is solved through direct method of multiple scales. Continuation algorithm is employed to explore the stability and various bifurcations of the nonlinear dynamic system. Focus has been made to study the effect of variations of fluctuating tension component, fluctuating velocity component independently and when combined, internal and parametric frequency detuning parameters and damping on the system response. Frequency response equilibrium curves are complex and unique in shapes which are embodied with various bifurcations. Such steady-state behavior is not seen in the existent literature. With variation in fluctuating velocity component, the number of steady-state nontrivial equilibrium curves increases to three and with variation in fluctuating axial tension, they become four. In this process, significant changes in stability, number and position of various bifurcations like supercritical and subcritical pitchfork, Hopf and saddle node are observed. Unlike the previous study, the shape, stability and bifurcations of equilibrium curves under the combined effect of axial velocity and tension closely match with the case of fluctuating axial tension component. The effect of variation in internal and parametric frequency detuning parameter is more realized for second mode compared to first mode. A comparison of the present work with a previous one where axial tension is variable reveals many qualitative and quantitative similarities and dissimilarities. But when compared with earlier work where axial velocity is constant, significant dissimilarities are surfaced. The system displays a wide ranging dynamic behavior including stable periodic, quasiperiodic and unstable chaotic behavior. The numerical computation depicts various nonlinear characteristics and oscillatory behaviors which are not found so far in the existent literature.     

Non-linear modal analysis of a rotating beam

The free non-linear vibration of a rotating beam has been considered in this paper. The von Karman strain-displacement relations are implemented. Non-linear equations of motion are obtained by Hamilton’s principle. Results are obtained by applying the method of multiple scales to a set of discretized ordinary differential equations which obtained by using the Galerkin discretization method. This set contains coupling between transverse and axial displacements as quadratic and cubic geometric non-linearities. Non-linear normal modes and non-linear natural frequencies with or without internal resonance are observed. In the internal resonance case, the internal resonance between two transverse modes and between one transverse and one axial mode are explored. Obtained results in this study are compared with those obtained from literature. The stability and some dynamic characteristics of the non-linear normal modes such as the phase portrait, Poincare section and power spectrum diagrams have been inspected. It is shown that, for the first internal resonance case, the beam has one stable or degenerate uncoupled mode and either: (a) one stable coupled mode, (b) one unstable coupled mode, (c) two stable and one unstable coupled modes, (d) three stable coupled modes, and (e) one stable coupled mode. On the other hand, for the second internal resonance case, the beam has one stable or unstable or degenerate uncoupled mode and either: (a) two stable coupled modes, (b) two unstable coupled modes, and (c) one stable coupled mode depending on the parameters.     

气流作用下同轴带电射流的不稳定性研究

通过对气体驱动同轴电流动聚焦的实验模型进行简化,开展了电场力和惯性力共同作用下同轴带电射流的不稳定性理论研究.在流动为无黏、不可压缩、无旋的假设下,建立了三层流体带电射流物理模型并得到了扰动在时间域内发展演化的解析形式色散关系,利用正则模方法求解色散方程发现了流动的不稳定模态,进而分析了主要控制参数对不稳定模态的影响.结果表明,在参考状态下轴对称模态的最不稳定增长率最大,因此轴对称扰动控制整个流场.外层气流速度越高,气体惯性力越大,射流的界面越容易失稳.内外层液-液同轴射流之间的速度差越大,射流越不稳定.表面张力对射流不稳定性起到促进作用.轴向电场对射流不稳定性具有双重影响:当加载电场强度较小时,射流不稳定性被抑制;当施加电压大于某一临界值时,轴向电场会促进射流失稳.临界电压的大小与界面上自由电荷密度和射流表面扰动发展关系密切.这些结果与已有的实验现象吻合,能够对实验的过程控制提供理论指导.     

Vibration and dynamic buckling of shear beam-columns on elastic foundation under moving harmonic loads

The vibration and buckling of an infinite shear beam-column, which considers the effects of shear and the axial compressive force, resting on an elastic foundation have been investigated when the system is subjected to moving loads of either constant amplitude or harmonic amplitude variation with a constant advance velocity. Damping of a linear hysteretic nature for the foundation was considered. Formulations in the transformed field domains of time and moving space were developed, and the response to moving loads of constant amplitude and the steady-state response to moving harmonic loads were obtained using a Fourier transform. Analyses were performed to examine how the shear deformation of the beam and the axial compression affect the stability and vibration of the system, and to investigate the effects of various parameters, such as the load velocity, load frequency, shear rigidity, and damping, on the deflected shape, maximum displacement, and critical values of the velocity, frequency, and axial compression. Expressions to predict the critical (resonance) velocity, critical frequency, and axial buckling force were proposed.     

端部受斜撞击作用悬臂梁的弹塑性动力响应模式

基于大变形动力控制方程并利用有限差分离散分析,研究了斜撞击作用下弹塑性悬臂梁的动力响应．通过对屈服函数以及弯矩、轴力在动力响应过程中分布规律的分析,阐明了斜撞击下恳臂梁的弹塑性动力响应模式和斜撞击的轴向分量对变形机制的影响．研究表明,弹塑性响应过程可划分为四个阶段,对应的变形模式为：“压缩塑性区扩展”模式,“广义移行塑性铰”和“压缩塑性区收缩”混合模式,“驻定塑性铰”模式,“弹性自由振动”模式．与刚塑性分析所假定的两相变形模式比较,弹塑性应响分析证实了响应早期的瞬态轴向压缩模式和梁根部“驻定塑性铰”模式的存在性,肯定了刚塑性分析所假定变形模式的主要特征．斜撞击的轴向分量在撞击发生的瞬时主导了梁的变形,使梁呈现同承受横向冲击明显小同的变形规律．随着响应的深入,轴向分量迅速衰减,其对截面屈服的贡献非常微弱,由横向分量引起的弯曲挠动在大部分时间内主导和控制梁的变形．数值计算结果表明,斜撞击载荷的质量、撞击速度和角度是影响梁动力响应的重要因素．     

Coupled bending and torsional vibration of nonsymmetrical axially loaded thin-walled Bernoulli–Euler beams

The dynamic transfer matrix is formulated for a straight uniform and axially loaded thin-walled Bernoulli–Euler beam element whose elastic and inertia axes are not coincident by directly solving the governing differential equations of motion of the beam element. Bernoulli–Euler beam theory is used, and the cross section of the beam does not have any symmetrical axes. The bending vibrations in two perpendicular directions are coupled with torsional vibration and the effect of warping stiffness is included. The dynamic transfer matrix method is used for calculation of exact natural frequencies and mode shapes of the nonsymmetrical thin-walled beams. Numerical results are given for a specific example of thin-walled beam under a variety of end conditions, and exact numerical solutions are tabulated for natural frequencies and solutions calculated by the other method are also tabulated for comparison. The effects of axial force and warping stiffness are also discussed.     

充满水的金属圆柱壳经受轴向撞击时屈曲过程的实验研究

本文报道了五种规格充满水的圆柱壳经受大质量低速度轴向撞击作用时屈曲过程的实验结果。研究表明由于液体的存在，圆柱壳的屈曲模态呈轴对称型的环带波纹，整个撞击过程可以明显地分为振荡的动力加载、平稳发展的后屈曲和迅速下降的弹性卸载三个阶段。并讨论了试件壁厚和高度等几何参数对其屈曲性能的影响。     

Cross-flow-induced instability and nonlinear dynamics of cylinder arrays with consideration of initial axial load

The instability and nonlinear dynamics of planar motions of a cylinder array subjected to cross-flow have been studied via a five-mode discretization of the governing partial differential equation, focusing on the effect of initial axial load externally imposed on the cylinder. Theoretical results based on a stability analysis have indicated that, with increasing initial axial load and flow velocity, the system may lose stability either via flutter or via buckling. The boundaries of these two forms of instability are predicted analytically. To explore the post-instability dynamics of the system, a Runge–Kutta scheme is used to solve the nonlinear governing equation of motion. Three typical behaviors, including limit cycle motions of the system, are obtained. It is shown that, for relatively low flow velocity, with increasing initial axial load, just beyond the pitchfork bifurcation the cylinder would settle in a buckled equilibrium position; and for high flow velocity, however, this phenomenon only occurs when the initial axial load becomes sufficiently large.     

Swelling effect on the dynamic behaviour of composite cylindrical shells conveying fluid

This paper presents a semi‐analytical investigation of a fluid–structure system. Both isotropic and composite cylindrical shells filled with or subjected to a flowing fluid have been considered in this study. The structure may be uniform or non‐uniform in the circumferential direction. The hybrid finite element approach, shearable shell theory and velocity potential flow theory have been combined to establish the dynamic equations of the coupled system. The set of matrices describing their relative contributions to equilibrium is determined by exact analytical integration of the equilibrium equations. The linear potential flow theory is applied to describe the fluid effects that lead to the inertial, centrifugal and Coriolis forces. The axisymmetric, beam‐like and shell modes of vibrations in both cases of uniform and non‐uniform cylindrical shells are investigated. Fluid elastic stability of a structure subjected to a flowing fluid is also studied. This theory yields the high and the low eigenvalues and eigenmodes with comparably high accuracy. Reasonable agreement is found with other theories and experiments. Copyright © 2005 John Wiley & Sons, Ltd.     

TEMPORAL STABILITY OF FLOW THROUGH VISCOELASTIC TUBES

The stability of the Hagen–Poiseuille flow of a Newtonian fluid in an incompressible, viscoelastic tube contained within a rigid, hollow cylinder is determined using linear stability analysis. The stability of the system subjected to infinitesimal axisymmetric or non-axisymmetric disturbances is considered. The fluid and wall inertia terms are retained in their respective equations of motion. A novel numerical strategy is introduced to study the stability of the coupled fluid–structure system. The strategy alleviates the need for aninitial guess and thus ensures that all the unstable modes within a given closed region in the complex eigenvalue plane will be found. It is found that the system is unstable to both axisymmetric and non-axisymmetric disturbances. Moreover, depending on the values of the control parameters, the first unstable mode can be either an axisymmetric mode with the azimuthal wavenumber n=0 or a non-axisymmetric mode withn =1. For a given azimuthal wavenumber, it is found that there are no more than two unstable modes within the closed region considered here in the complex plane. For both the axisymmetric and non-axisymmetric instabilities, one mode is a solid-based, flow-induced surface instability, while the other one is a fluid-based instability that asymptotes to the least-damped rigid-wall mode as the thickness of the compliant wall tends to zero. All four modes are stabilized, to different degrees, by the solid viscosity.     

Stability of fluid-conveying periodic shells on an elastic foundation with external loads

This paper presents the beam-mode stability of a fluid-conveying periodic shell on an elastic foundation subjected to external loading. A transfer matrix (TM) method was developed to investigate the characteristics of steady-state waves in the system and the dynamic response of the periodic shell system. When subjected to external perturbations, including either a moving load or a stationary one, the shell may be subjected to instability for flow velocities exceeding a certain critical velocity. The system can also become unstable when a travelling load exceeds a certain critical value. The coupled effects of the speed of a moving load and the flow velocity of a fluid on the stability of the shell system were also investigated. A periodic structure was designed for such a shell system to enhance its dynamic stability. The periodic shell system produces innumerable velocity band gaps (VBGs), which could raise the critical velocity and extend the stable range for both the moving load and the flowing fluid. Finally, the formation mechanism of the VBGs was studied, as well as the effects of the thickness, length of the shell cells, Young׳s modulus and stiffness of the elastic foundation on modulating the VBGs.     

大变形轴向运动梁的精确动力学模型

轴向运动梁的横向振动是具有实际工程背景的动力学问题.该文应用Cosserat弹性杆模型讨论圆截面轴向运动梁的动力学建模及其运动稳定性.以沿梁中心线的弧坐标代替方向固定的坐标轴,根据梁截面的姿态随弧坐标和时间的变化确定梁的变形过程.从欧拉的速度场概念出发,考虑梁截面转动的惯性效应和剪切变形,建立大变形轴向运动梁的动力学方程.其小变形特例为轴向运动的三维Timoshenko梁.基于该模型分析了轴向运动梁准稳态运动的静态和动态稳定性,导出可导致失稳的临界轴向速度.证明空间域内的欧拉稳定性条件是时间域内的Lyapunov稳定性的必要条件.      

Coupled bending-torsion vibration of a homogeneous beam with a single delamination subjected to axial loads and static end moments

Delaminations in structures may significantly reduce the stiffness and strength of the structures and may affect their vibration characteristics. As structural components, beams have been used for various purposes, in many of which beams are often subjected to axial loads and static end moments. In the present study, an analytical solution is developed to study the coupled bending-torsion vibration of a homogeneous beam with a single delamination subjected to axial loads and static end moments. Euler–Bernoulli beam theory and the "free mode" assumption in delamination vibration are adopted. This is the first study of the influences of static end moments upon the effects of delaminations on natural frequencies, critical buckling loads and critical moments for lateral instability. The results show that the effects of delamination on reducing natural frequencies, critical buckling load and critical moment for lateral instability are aggravated by the presence of static end moment. In turn, the effects of static end moments on vibration and instability characteristics are affected by the presence of delamination. The analytical results of this study can serve as a benchmark for finite element method and other numerical solutions.     

时变张力作用下轴向运动梁的分岔与混沌

轴向运动结构的横向参激振动一直是非线性动力学领域的研究热点之一. 目前研究较多的是轴向速度摄动的动力学模型,参数激励由速度的简谐波动产生. 但在工程应用中,存在轴向张力波动的运动结构较为广泛,而针对轴向张力摄动的模型研究较少. 本文研究了时变张力作用下轴向变速运动黏弹性梁的分岔与混沌. 考虑随着时间周期性变化的轴向张力,计入线性黏性阻尼,采用Kelvin模型的黏弹性本构关系,给出了梁横向非线性 振动的积分--偏微分控制方程. 首先应用四阶Galerkin截断方法将控制方程离散化,然后采用四阶Runge-Kutta方法计算系统的数值解,进而确定其动力学行为. 基于梁中点的横向位移和速度的数值结果,仿真了梁沿平均轴速、张力摄动幅值、张力摄动频率以及黏弹性系数变化的倍周期分岔与混 沌运动,并且通过计算系统的最大李雅普诺夫指数来识别其混沌行为. 结果表明:较小的平均轴速有助于梁的周期运动,梁在临界速度附近容易发生倍周期分岔与混沌行为. 随着张力摄动幅值的增大,梁的振动幅值的混沌区间不断增大. 较小的黏弹性系数和张力摄动频率更容易使梁发生混沌运动. 最后,给出时程图、频谱图、相图以及Poincaré 映射图来确定梁的混沌运动.      

ANCF索梁单元应变耦合问题与模型解耦

索粱结构在土木工程、航空航天等领域有着广泛的应用.在各类索梁动力学建模方法中,由于绝对节点坐标方法(absolute nodal coordinate formulation,ANCF)能够描述柔性体的大变形和大转动问题,因此非常适合大变形索梁结构的动力学建模.对绝对节点坐标索梁单元的应变进行分析可知,弯曲变形会引起单元内部轴向应变的不均匀分布,即单元轴向应变与弯曲应变相互耦合.这种应变耦合效应使单元产生伪应变能,导致单元刚度增大,造成单元失真.分析不同弯曲角下的单元应变及应变能可知,弯曲变形越大,单元失真越严重.通过构造等效一维杆单元重新描述轴向应变,实现了轴向应变与弯曲应变解耦.在此基础上推导广义弹性力,得到了绝对节点坐标索梁单元的应变解耦模型.对解耦前后的两种梁模型进行静力学和动力学仿真,结果表明;解耦模型消除了单元伪应变,相比原模型表现出更好的收敛性和曲率连续性,在相同单元数目下具有更高的精度.同时由于解耦模型降低了单元刚度,因此相比原模型,速度曲线中不再有高频振动.     

弹性连接旋转柔性梁动力学分析

采用Chebyshev 谱方法对考虑根部连接弹性的平面内旋转柔性梁动力学特性进行研究. 基于Gauss-Lobatto 节点与Chebyshev 多项式方法对柔性梁变形场进行离散,通过投影矩阵法施加固定及弹性连接边界条件. 利用Chebyshev 谱方法获得了系统固有频率和模态振型数值解,通过与有限元方法及加权残余法的比较,验证了方法的有效性. 分析了弹性连接刚度、角速度比率、系统径长比及梁的长细比等参数对系统固有频率及模态振型的影响. 研究发现:由于系统弯曲模态、拉伸模态的频率随各参数的变化规律不一致,将出现频率转向与振型转换现象;随着弹性连接刚度、角速度比率及系统径长比的增大,低阶弯曲模态频率增大并超过高阶拉伸模态频率,随着梁的长细比的增大,低阶拉伸模态频率增大并超过高阶弯曲模态频率.      

非对称混杂边界轴向运动Timoshenko梁橫向振动分析

研究两端带有扭转弹簧且弹簧系数均可任意变化的非对称混杂边界下的轴向运动Timoshenko梁的横向振动.利用非对称混杂边界条件推导对应任意弹簧系数的系统超越方程以及特征函数.运用数值方法计算系统的固有频率及其相应的模态函数,并研究确定梁的刚度、轴向速度以及边界处扭转弹簧的刚度的影响.通过数值算例,比较7imoshenko梁、瑞利梁、剪切梁和欧拉梁的固有频率随轴向速度的变化,分析转动惯量和剪切变形的影响.     

Dynamic response of elastic-plastic ideal sandwich beams

The dynamic response of elastic-plastic ideal sandwich beams is investigated. The plastic deformation is interpreted as a kind of general loads in the elastic beams, while the moving interfaces between elastic and plastic regions are treated as external restraint conditions. Particularly, the dynamic response of a cantilever beam is investigated using the classical method by means of the superposition of the vibration modes of elastic beams. The numerical results show that, compared with the rigid plastic solutions, the dynamic behavior of elastoplastic beam exhibits complex response modes. In some cases, elastic deformation has very important effects on the response mode of the beam, so it should not be ignored.     

Analysis of Coupled Vibration Characteristics of Wind Turbine Blade Based on Green's Functions

This paper presents the analysis of dynamic characteristics of horizontal axis wind turbine blade, where the mode coupling among axial extension, flap vibration(out-of-plane bending), lead/lag vibration(in-plane bending) and torsion is emphasized. By using the Bernoulli-Euler beam to describe the slender blade which is mounted on rigid hub and subjected to unsteady aerodynamic force, the governing equation and characteristic equation of the coupled vibration of the blade are obtained. Due to the combined influences of mode coupling, centrifugal effect, and the non-uniform distribution of mass and stiffness, the explicit solution of characteristic equation is impossible to obtain. An equivalent transformation based on Green's functions is taken for the characteristic equation, and then a system of integrodifferential equations is derived. The numerical difference methods are adopted to solve the integrodifferential equations to get natural frequencies and mode shapes. The influences of mode coupling, centrifugal effect, and rotational speed on natural frequencies and mode shapes are analyzed. Results show that:(1) the influence of bending-torsion coupling on natural frequency is tiny;(2) rotation has dramatic influence on bending frequency but little influence on torsion frequency;(3) the influence of bending-bending coupling on dynamic characteristics is notable at high rotational speed;(4) the effect of rotational speed on bending mode is tiny.