Use of Side‐Chain Incompatibility for Tailoring Long‐Range p/n Heterojunctions: Photoconductive Nanofibers Formed by Self‐Assembly of an Amphiphilic Donor–Acceptor Dyad Consisting of Oligothiophene and Perylenediimide

To tailor organic p/n heterojunctions with molecular‐level precision, a rational design strategy using side‐chain incompatibility of a covalently connected donor–acceptor (D–A) dyad has been successfully carried out. An oligothiophene–perylenediimide dyad, when modified with triethylene glycol side chains at one terminus and dodecyl side chains at the other ( 2 Amphi ), self‐assembles into nanofibers with a long‐range D/A heterojunction. In contrast, when the dyad is modified with dodecyl side chains at both termini ( 2 Lipo ), ill‐defined microfibers result. In steady‐state measurements using microgap electrodes, a cast film of the nanofiber of 2 Amphi displays far better photoconducting properties than that of the microfiber of 2 Lipo . Flash‐photolysis time‐resolved microwave conductivity measurements, in conjunction with transient absorption spectroscopy, clearly indicate that the nanofiber of 2 Amphi intrinsically allows for better carrier generation and transport properties than the microfibrous assembly of 2 Lipo .     

Synthesis and optical properties of triphenylene-based dendritic donor perylene diimide acceptor systems

A donor-acceptor charge transfer system based on two discotic mesogens has been synthesized. The donor is either a triphenylene (POG0) or a triphenylene-based conjugated dendron (POG1), while the acceptor is a perylene diimide (PDI) core. The donors are covalently linked to the bay positions of the PDI core through an ether linkage. In chloroform, due to the short donor-acceptor distance and the matching frontier orbital levels, photoinduced charge transfer from either the donor excitation or the acceptor excitation are both thermodynamically and kinetically favored, resulting in efficient quenching of both donor and acceptor fluorescence. In a less polar solvent, hexane, while charge transfer is still the dominant mechanism for decay of the excited electronic state of POG1, photoinduced charge transfer is no longer energetically favorable for POG0 when the acceptor PDI core is excited, making the PDI core of POG0 weakly fluorescent in chloroform but strongly so in hexane. In solid film, POG0 is highly aggregated through both PDI-PDI and triphenylene-triphenylene homotopic stacking. POG1, on the other hand, aggregates through triphenylene dendrons with limited PDI-PDI core stacking, presumably due to the steric hindrance caused by bulky triphenylene moieties which block the access to the PDI core. The efficient photoinduced charge transfer, coupled with the homotopic stacking that forms separated electron-transporting PDI-stacked columns and hole transporting triphenylene-stacked columns, suggests that the reported donor-acceptor systems based on dual-discotic mesogens are potentially new efficient photovoltaic materials.     

Diketopyrrolopyrrole‐based acceptor–acceptor conjugated polymers: The importance of comonomer on their charge transportation nature

Besides the donor–acceptor (D–A) type, acceptor–acceptor (A–A) polymers are another class of important alternative conjugated copolymers, but have been less studied in the past. In this study, two kinds of A–A polymers, P1 and P2 , have been designed and synthesized based on diketopyrrolopyrrole in combination with the second electron‐deficient unit, perylenediimide or thieno[3,4‐c]pyrrole‐4,6‐dione. UV–vis absorption spectroscopy revealed that these two kinds of polymers have a band gap of 1.28–1.33 eV. Their highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels are around ?5.6 and ?4.0 eV for P1 polymers, whereas ?5.4 and ?3.7 eV for P2 polymers, respectively. Density functional theory study disclosed that P1 backbone is in a vastly twisting state, whereas that of P2 is completely planar. Furthermore, organic field‐effect transistor devices were fabricated using these two kinds of polymers as the active material. Of interest, the devices based on P1 polymers displayed n‐channel behaviors with an electron mobility in the order of 10^?4 cm² V^?1 s^?1. In contrast, the P2 ‐based devices exhibited only p‐channel charge transportation characteristics with a hole mobility in the order of 10^?3 cm² V^?1 s^?1. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2356–2366     

Tetrathiafulvalene‐Based Mixed‐Valence Acceptor–Donor–Acceptor Triads: A Joint Theoretical and Experimental Approach

This work presents a joint theoretical and experimental characterisation of the structural and electronic properties of two tetrathiafulvalene (TTF)‐based acceptor–donor–acceptor triads (BQ–TTF–BQ and BTCNQ–TTF—BTCNQ; BQ is naphthoquinone and BTCNQ is benzotetracyano‐p‐quinodimethane) in their neutral and reduced states. The study is performed with the use of electrochemical, electron paramagnetic resonance (EPR), and UV/Vis/NIR spectroelectrochemical techniques guided by quantum‐chemical calculations. Emphasis is placed on the mixed‐valence properties of both triads in their radical anion states. The electrochemical and EPR results reveal that both BQ–TTF–BQ and BTCNQ–TTF–BTCNQ triads in their radical anion states behave as class‐II mixed‐valence compounds with significant electronic communication between the acceptor moieties. Density functional theory calculations (BLYP35/cc‐pVTZ), taking into account the solvent effects, predict charge‐localised species (BQ ^{. ?}–TTF–BQ and BTCNQ ^{. ?}–TTF–BTCNQ) as the most stable structures for the radical anion states of both triads. A stronger localisation is found both experimentally and theoretically for the BTCNQ–TTF–BTCNQ anion, in accordance with the more electron‐withdrawing character of the BTCNQ acceptor. CASSCF/CASPT2 calculations suggest that the low‐energy, broad absorption bands observed experimentally for the BQ–TTF–BQ and BTCNQ–TTF–BTCNQ radical anions are associated with the intervalence charge transfer (IV‐CT) electronic transition and two nearby donor‐to‐acceptor CT excitations. The study highlights the molecular efficiency of the electron‐donor TTF unit as a molecular wire connecting two acceptor redox centres.     

Metastable Chiral Azobenzenes Stabilized in a Double Racemate

The self‐assembly of chiral organic chromophores is gaining huge significance due to the abundance of supramolecular chirality found in natural systems. We report an interdigitated molecular assembly involving axially chiral octabrominated perylenediimide (OBPDI) which transfers chiral information to achiral aromatic moieties. The crystalline two‐component assemblies of OBPDI and electron‐rich aromatic units were facilitated through π‐hole???π donor–acceptor interactions, and the charge‐transfer characteristics in the ground and excited states of the OBPDI cocrystals were established through spectroscopic and theoretical techniques. The OBPDI cocrystals entail a remarkable homochiral segregation of P and M enantiomers of both molecular entities in the same crystal system, leading to twisted double‐racemic arrangements. Synergistically engendered cavities with the stored chiral information of the twisted OBPDI stabilize higher‐energy P/M enantiomers of trans‐azobenzene through non‐covalent interactions.     

P4VP and oligo(phenylenevinylene)‐perylenebisimide mixed donor‐acceptor supramolecular comb polymer complexes with improved charge carrier mobility

Random donor‐acceptor (D‐A) supramolecular comb polymers were formed when hydroxyl functionalized donor and acceptor small molecules based on Oligo(phenylenevinylene) (named OPVCN‐OH ) and Perylenebisimide (named UPBI‐PDP ), respectively, were complexed with Poly(4‐vinyl pyridine) (P4VP). A series of random D‐A supramolecular comb polymers were formed by varying the ratios of UPBI‐PDP and OPVCN‐OH with P4VP. A 100% P4VP‐donor polymer complex [ P4VP(OPV_1.00 )] and a 100% P4VP‐acceptor polymer complex [ P4VP(UPBI_1.00 )] were also synthesized and characterized. Complex formation was confirmed by FT‐IR and ¹H NMR spectroscopy. Solid state structural studies carried out using small angle X‐ray scattering and wide angle X‐ray diffraction experiments revealed altered packing of the D and A molecules in the complexes. Transmission electron microscopy images showed lamellar structures in the < 10 nm scale for the P4VP(OPV_1.00 ), P4VP(UPBI_1.00 ), and mixed P4VP (D‐A) complexes. The effect of the nanoscopic D‐A self‐assembly on the bulk mobility of the materials was probed using SCLC measurements. The mixed D‐A random complexes exhibited ambipolar charge transport characteristics with higher values for the average bulk hole mobility estimate. P4VP(OPV_0.25 + UPBI_0.75) exhibited an average hole mobility in the order of 10^?2cm² V^?1 s^?1 and electron mobility 10^?5cm² V^?1 s^?1. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2403–2412     

Photoconductive Core–Shell Liquid‐Crystals of a Perylene Bisimide J‐Aggregate Donor–Acceptor Dyad

A novel core–shell structured columnar liquid crystal composed of a donor‐acceptor dyad of tetraphenoxy perylene bisimide (PBI), decorated with four bithiophene units on the periphery, was synthesized. This molecule self‐assembles in solution into helical J‐aggregates guided by π–π interactions and hydrogen bonds which organize into a liquid‐crystalline (LC) columnar hexagonal domain in the solid state. Donor and acceptor moieties exhibit contrasting exciton coupling behavior with the PBIs’ (J‐type) transition dipole moment parallel and the bithiophene side arms’ (H‐type) perpendicular to the columnar axis. The dyad shows efficient energy and electron transfer in solution as well as in the solid state. The synergy of photoinduced electron transfer (PET) and charge transport along the narcissistically self‐assembled core–shell structure enables the implementation of the dye in two‐contact photoconductivity devices giving rise to a 20‐fold increased photoresponse compared to a reference dye without bithiophene donor moieties.     

Long‐Lived Charge Separation in Novel Axial Donor–Porphyrin–Acceptor Triads Based on Tetrathiafulvalene,Aluminum(III) Porphyrin and Naphthalenediimide

Two self‐assembled supramolecular donor–acceptor triads consisting of Al^III porphyrin (AlPor) with axially bound naphthalenediimide (NDI) as an acceptor and tetrathiafulvalene (TTF) as a secondary donor are reported. In the triads, the NDI and TTF units are attached to Al^III on opposite faces of the porphyrin, through covalent and coordination bonds, respectively. Fluorescence studies show that the lowest excited singlet state of the porphyrin is quenched through electron transfer to NDI and hole transfer to TTF. In dichloromethane hole transfer to TTF dominates, whereas in benzonitrile (BN) electron transfer to NDI is the main quenching pathway. In the nematic phase of the liquid crystalline solvent 4‐(n‐pentyl)‐4′‐cyanobiphenyl (5CB), a spin‐polarized transient EPR spectrum that is readily assigned to the weakly coupled radical pair TTF^.+NDI^.? is obtained. The initial polarization pattern indicates that the charge separation occurs through the singlet channel and that singlet–triplet mixing occurs in the primary radical pair. At later time the polarization pattern inverts as a result of depopulation of the states with singlet character by recombination to the ground state. The singlet lifetime of TTF^.+NDI^.? is estimated to be 200–300 ns, whereas the triplet lifetime in the approximately 350 mT magnetic field of the X‐band EPR spectrometer is about 10 μs. In contrast, in dichloromethane and BN the lifetime of the charge separation is <10 ns.     

OLED and PLED Devices Employing Electrogenerated,Intramolecular Charge‐Transfer Fluorescence

The light generating mechanism of a series of light emitting diodes with electron donor–bridge–acceptor systems (D–b–A) as the emitting species was examined by constructing model diodes based on small organic molecules (OLEDs) as well as on molecularly doped electroactive (poly‐N‐vinylcarbazole, PVK) and insulating (polystyrene, PS) polymers (PLEDs). The direct electrogeneration of an intramolecular charge‐transfer (CT) fluorescence of the donor–bridge–acceptor systems occurred readily in OLED devices with a D–b–A system as the emissive layer. In diodes with PS as the host matrix, hole‐injection and electron‐injection occurred directly in the D–b–A molecules residing close to the anode and the cathode, respectively. In the PVK diodes, hole‐injection occurred primarily into PVK and the positive charge carrier was subsequently trapped on the D–b–A molecule, whereas electron‐injection at the cathode side occurred directly into the D–b–A molecules. Charge‐hopping between neighboring molecules then occurred until a hole and electron resided on the same molecule, which is equivalent to the formation of the CT excited state, and which finally relaxed by intramolecular charge recombination under the emission of CT fluorescence.     

Dithienosilole–phenylquinoxaline‐based copolymers with A‐D‐A‐D and A‐D structures for polymer solar cells

Two copolymers having D‐A‐D‐A ( P1 ) and D‐A ( P2 ) structures with quinoxaline acceptor unit and dithienosilole donor unit were synthesized and their optical and electrochemical (both experimental and theoretical) properties were investigated. The optical properties showed that these copolymers P1 and P2 exhibit optical bandgaps of 1.54 and 1.62 eV, respectively, with broader absorption profiles extending up to 800 nm and 770 nm, respectively. The electrochemical investigation of these two copolymers indicates that they exhibit suitable highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels for efficient exciton dissociation and high open circuit voltage in the resultant polymer solar cells (PSCs). These copolymers were used as donors along with the PC₇₁BM as acceptor for the fabrication of solution processed bulk heterojunction PSCs. The optimized P1 :PC₇₁BM and P2 :PC₇₁BM active layers treated with solvent vapor treatment showed overall power conversion efficiency (PCE) of 7.16% and 6.57%, respectively. The higher PCE of P1 ‐based device as compared to P2 might be attributed to higher crystallinity of P1 and good hole mobility resulting more balanced charge transport. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 376–386     

meso‐Tritolylcorrole‐Functionalized Single‐walled Carbon Nanotube Donor?Acceptor Nanocomposites for NO2 Detection

meso‐Tritolylcorrole‐functionalized single‐walled carbon nanotubes (TTC‐SWNT) donor‐acceptor (D–A) heterojunction nanocomposite film was fabricated on a polycarbonate membrane through filtration and non‐covalent functionalization, providing an excellent sensing platform with low‐cost, high flexibility and good gas accessibility. The TTC‐SWNTs nanocomposite displays a fast and sensitive response to nitrogen dioxide with a limit of detection of 10 ppb (S/N=3). The sensing response was significantly amplified compared to the unmodified one, which was ascribed to a D–A heterojunction at the interface between electron donor TTC and electron acceptor SWNTs. This study provides a simple route to fabricate low‐cost and highly sensitive donor‐acceptor nanocomposite‐based gas sensors.     

Synthesis and characterization of thieno[3,2‐b]thiophene‐isoindigo‐based copolymers as electron donor and hole transport materials for bulk‐heterojunction polymer solar cells

A novel class of thieno[3,2‐b]thiophene (TT) and isoindigo based copolymers were synthesized and evaluated as electron donor and hole transport materials in bulk‐heterojunction polymer solar cells (BHJ PSCs). These π‐conjugated donor‐acceptor polymers were derived from fused TT and isoindigo structures bridged by thiophene units. The band‐gaps and the highest occupied molecular orbital (HOMO) levels of the polymers were tuned using different conjugating lengths of thiophene units on the main chains, providing band‐gaps from 1.55 to 1.91 eV and HOMO levels from ?5.34 to ?5.71 eV, respectively. The corresponding lowest unoccupied molecular orbital (LUMO) levels were appropriately adjusted with the isoindigo units. Conventional BHJ PSCs (ITO/PEDOT:PSS/active layer/interlayer/Al) with an active layer composed of the polymer and PC₇₁BM were fabricated for evaluation. Power conversion efficiency from a low of 1.25% to a high of 4.69% were achieved with the best performing device provided by the D?π?A polymer with a relatively board absorption spectrum, high absorption coefficient, and more uniform blend morphology. These results demonstrate the potential of this class of thieno[3,2‐b]thiophene‐isoindigo‐based polymers as efficient electron donor and hole transport polymers for BHJ PSCs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Alternating copolymers of electron‐rich arylamine and electron‐deficient 2,1,3‐benzothiadiazole: Synthesis,characterization and photovoltaic properties

A series of alternating copolymers of electron‐rich arylamine and electron‐deficient 2,1,3‐benzothiadiazole (BT), PV‐BT, DP‐BT, and TP‐BT, were synthesized by Heck coupling reaction. UV–vis absorption and fluorescence spectra show that the copolymerization of electron‐rich diphenylamine (DP), triphenylamine (TP), MEH‐PV (PV), and electron‐deficient BT results in low‐bandgap conjugated polymers. Within the three copolymers of PV‐BT, DP‐BT, and TP‐BT, TP‐BT possesses the highest hole mobility of 4.68 × 10^{? 5} cm²/V, as determined from the space charge limited current (SCLC) model. The bulk heterojunction‐typed polymer solar cells (PSCs) were fabricated with the blend of the copolymers and PCBM as the photosensitive layer. The power conversion efficiencies (PCE) of the PSCs based on PV‐BT, DP‐BT, and TP‐BT reached 0.26%, 0.39%, and 0.52%, respectively, under the illumination of AM 1.5, 100 mW/cm². The results indicate that TP‐BT is a promising photovoltaic polymer for PSCs. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3861–3871, 2007     

Curved Oligophenylenes as Donors in Shape‐Persistent Donor–Acceptor Macrocycles with Solvatofluorochromic Properties

Many optoelectronic organic materials are based on donor–acceptor (D–A) systems with heteroatom‐containing electron donors. Herein, we introduce a new molecular design for all‐carbon curved oligoparaphenylenes as donors, which results in the generation of unique shape‐persistent D–A macrocycles. Two types of acceptor‐inserted cycloparaphenylenes were synthesized. These macrocycles display positive solvatofluorochromic properties owing to their D–A characteristics, which were confirmed by theoretical and electrochemical studies.     

Band gap tuning of narrow‐polydispersity two‐dimensional conductive polymers with electroactive side‐chains

A series of two‐dimensional donor–acceptor–donor (D1–A(D2)) type of conducting polymers (CPs) all with electroactive bulky side chain structure has been designed, synthesized, and investigated by introducing the donor–acceptor (D1–A) thiophene–quinoxaline moiety in the main chain alongside and additional donor and hole transporting units in the side chain. All the UV‐vis spectra of the 2D polymers, PTPQT, PFPQT, and PCPQT, each with triphenylamine, fluorene, and carbazole units as the D2 side chain, possess strong intramolecular charge transfer absorption, thus resulting in better light harvesting. Their optical and electronic properties were thoroughly explored experimentally and computationally. The effect of molecular weight of the narrow polydispersity polymers on their optoelectronic property was studied in detail. In summary, the 2‐D CPs show potential for use as an active material in optoelectronic devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1217–1227     

Influence of Perfluoroarene–Arene Interactions on the Phase Behavior of Liquid Crystalline and Polymeric Materials

A stabilization of the liquid-crystalline mesophase and thus an enlarged temperature range of the mesogenic phase is achieved by adding perfluorotriphenylene to a chiral liquid-crystalline triphenylene. This mesophase is based on 1:1 perfluoroarene–arene interactions (see picture). In a polymer with triphenylenes as mesogens in the side chains, the addition of perfluorotriphenylene led to crystallization.     

Diketopyrrolopyrrole‐based liquid crystalline conjugated donor–acceptor copolymers with reduced band gap for polymer solar cells

A new liquid crystalline (LC) acceptor monomer 2,5‐bis[4‐(4′‐cyanobiphenyloxy)dodecyl]‐3,6‐dithiophen‐2‐yl‐pyrrolo[3,4‐c]pyrrole‐1,4‐dione (TDPPcbp) was synthesized by incorporating cyanobiphenyl mesogens into diketopyrrolopyrrole (DPP). The monomer was copolymerized with bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′] dithiophene (BDT) and N‐9′‐heptadecanylcarbazole (CB) donors to obtain donor–acceptor alternating copolymers poly[4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene‐alt‐3,6‐bis(thiophen‐5‐yl)‐2,5‐bis[4‐(4′‐cyanobiphenyloxy)dodecyl]‐2,5‐dihydropyrrolo[3,4‐c]pyrrole‐1,4‐dione] (PBDTDPPcbp) and poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐3,6‐bis(thiophen‐5‐yl)‐2,5‐bis[4‐(4′‐cyano‐biphenyloxy)dodecyl]‐2,5‐dihydropyrrolo[3, 4‐c]pyrrole‐1,4‐dione] (PCBTDPPcpb) with reduced band gap, respectively. The LC properties of the copolymers, the effects of main chain variation on molecular packing, optical properties, and energy levels were analyzed. Incorporating the mesogen cyanobiphenyl units not only help polymer donors to pack well through mesogen self‐organization but also push the fullerene acceptor to form optimized phase separation. The bulk heterojunction photovoltaicdevicesshow enhanced performance of 1.3% for PBDTDPPcbp and 1.2% for PCBTDPPcbp after thermal annealing. The results indicate that mesogen‐controlled self‐organization is an efficient approach to develop well‐defined morphology and to improve the device performance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Slow geminate‐charge‐pair recombination dynamics at polymer: Fullerene heterojunctions in efficient organic solar cells

We explore charge recombination dynamics at electron donor‐acceptor heterojunctions, formed between a semiconductor polymer (PCDTBT) and a fullerene derivative (PC₇₀BM), by means of combined time‐resolved photoluminescence and transient absorption spectroscopies. Following prompt exciton dissociation across the heterojunction, a subset of bound electron‐hole pairs recombines with a temperature‐independent rate distribution spanning submicrosecond timescales to produce luminescent charge‐transfer excitons (CTX). At 14 K, this slow mechanism is the dominant geminate charge recombination pathway, whereas we also observe CTX emission on subnanosecond timescales at 293 K. We thus find that at these temperatures, a fraction of the initial charge‐pair population is trapped deeply such that they only recombine slowly over a broad distribution of timescales by quantum tunneling. We identify geminate polaron pairs (GPP) as a reservoir of long‐lived localized states that repopulate the CTX up to microsecond timescales. The observation of such distributed geminate‐charge recombination highlights the importance of the molecular nature of specific donor–acceptor electronic interactions in defining the relaxation pathways of trapped GPP. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Acceptor–acceptor conjugated copolymers based on perylenediimide and benzothiadiazole for all‐polymer solar cells

Donor–acceptor (D–A) conjugated copolymers are one of known classes of organic optoelectronic materials and have been well developed. However, less attention has been paid on acceptor–acceptor (A–A) conjugated analogs. In this work, two types of A–A conjugated copolymers, namely P1‐Cn and P2‐Cn (n is the carbon number of their alkyl side chains), were designed and synthesized based on perylenediimide ( PDI ) and 2,1,3‐benzothiadiazole ( BT ). Different from P1‐Cn , P2‐Cn polymers have additional acetylene π‐spacers between PDI and BT and thus hold a more planar backbone configuration. Property studies revealed that P2‐Cn polymers possess a much red‐extended UV–vis absorption spectrum, stronger π–π interchain interactions, and one‐order larger electron mobility in their neat film state than P1‐Cn . However, all‐polymer solar cells using P1‐Cn as acceptor component and poly(3‐hexyl thiophene) or poly(2,7‐(9,9‐didodecyl‐fluoene)‐alt?5,5′‐(4,7‐dithienyl‐2‐yl‐2,1,3‐benzothiadiazole) as donor component exhibited much better performance than those based on P2‐Cn . Apart from their backbone chemical structure, the side chains were found to have little influence on the photophysical, electrochemical, and photovoltaic properties for both P1‐Cn and P2‐Cn polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1200–1215     

Solution‐Grown Organic Single‐Crystalline Donor–Acceptor Heterojunctions for Photovoltaics

Organic single crystals are ideal candidates for high‐performance photovoltaics due to their high charge mobility and long exciton diffusion length; however, they have not been largely considered for photovoltaics due to the practical difficulty in making a heterojunction between donor and acceptor single crystals. Here, we demonstrate that extended single‐crystalline heterojunctions with a consistent donor‐top and acceptor‐bottom structure throughout the substrate can be simply obtained from a mixed solution of C₆₀ (acceptor) and 3,6‐bis(5‐(4‐n‐butylphenyl)thiophene‐2‐yl)‐2,5‐bis(2‐ethylhexyl)pyrrolo[3,4‐c]pyrrole‐1,4‐dione (donor). 46 photovoltaic devices were studied with the power conversion efficiency of (0.255±0.095) % under 1 sun, which is significantly higher than the previously reported value for a vapor‐grown organic single‐crystalline donor–acceptor heterojunction (0.007 %). As such, this work opens a practical avenue for the study of organic photovoltaics based on single crystals.