含氟不饱和酯的~(13)C核磁共振谱

本文报道了含氟不饱和酯的~(13)C化学位移和偶合常数。并根据碳上电荷转移、杂化程度以及邻接基团的电荷密度,解释了炔碳的化学位移和氟碳偶合常数。     

钯催化卤代芳烃Ullmann偶合反应

Ullmann偶合反应是有机合成中构建碳—碳键最重要的方法之一. 综述了钯催化卤代芳烃Ullmann偶合反应的研究进展, 其中包括钯催化还原Ullmann偶合反应和钯催化氧化Ullmann偶合反应等两部分.     

碳碳偶合反应中间体Li[Cp2Zr(C≡CPh)·(η2∶1,2-PhC2C≡CPh)]的合成和晶体结构

室温下, 用Cp2ZrCl2 与LiC≡CPh反应, 合成了碳碳偶合反应的Zr(Ⅱ)阴离子中间体Li[Cp2Zr(C≡CPh)(η2:1,2-PhC2C≡CPh)]. 用元素分析、核磁共振谱和红外光谱对配合物进行了表征, 配合物的晶体结构分析给出了两个炔烃之间碳碳偶合的证据. 用核磁共振谱初步探讨了合成反应机理.     

氨水介质中金属锌促进醛的呐偶联反应

传统的呐偶合反应必须在无水有机溶剂条件下, 由金属或金属化合物促进羰基化合物进行呐偶合反应. 曾经报道过金属锌在强碱介质或弱酸介质中, 促进羰基化合物进行水相呐偶合反应. 本文报道一种简便、有效的水相呐偶合反应, 它是在含有少量冠醚的稀氨水溶液中, 使用锌粉促进醛基化合物进行水相呐偶合反应, 其中加入少量的冠醚有助于提高反应的产率, 呐醇产率由63%提高到84%. 然而, 呐偶合反应的产率受到羰基周围环境的立体位阻影响较大, 在此条件下, 锌粉能有效地促进芳香族醛类化合物进行水相呐偶合反应, 得到的呐醇产率高, 但非对映异构体选择性差, 而脂肪族醛类化合物得到的呐醇产率较低, 在同样的条件下, 酮类化合物不能顺利进行呐偶合反应.     

蛋白质顺序测定技术(五)

(三)DABITC/PITC双偶合法~([1-13]) DABITC/PITC双偶合微量顺序测定法,是用有色试剂DABITC与多肽或蛋白质的氨基作第一次偶合,因该偶合反应产率只有25—50％左右,余下没有与DABITC偶合的氨基再用PITC作第二次偶合,由于PITC与多肽或蛋白质的偶合反应几乎是定量的,这样就保证了每个残基都反应完全,然后再裂解,转化、鉴定有色的DABTH-氨基酸。失去一个残基后的肽或蛋白质再偶合、裂解,转化,依次循环测定多肽和蛋白质顺序,其反应原理如下:     

脂肪酶催化C—C键形成反应研究新进展

脂肪酶是一类重要的生物催化剂,因其具有反应选择性高、条件温和、环境友好等特点,被广泛应用于有机合成中.综述了近年来脂肪酶催化Aldol缩合、Knoevenagel缩合、Michael加成、Henry反应等多种C—C键形成反应的新进展.     

氨水介质中金属锌促进醛的(口片)呐偶联反应

传统的(口片)呐偶合反应必须在无水有机溶剂条件下,由金属或金属化合物促进羰基化合物进行(口片)呐偶合反应.曾经报道过金属锌在强碱介质或弱酸介质中,促进羰基化合物进行水相(口片)呐偶合反应.本文报道一种简便、有效的水相(口片)呐偶合反应,它是在含有少量冠醚的稀氨水溶液中,使用锌粉促进醛基化合物进行水相(口片)呐偶合反应,其中加入少量的冠醚有助于提高反应的产率,(口片)呐醇产率由63%提高到84%.然而,(口片)呐偶合反应的产率受到羰基周围环境的立体位阻影响较大,在此条件下,锌粉能有效地促进芳香族醛类化合物进行水相(口片)呐偶合反应,得到的(口片)呐醇产率高,但非对映异构体选择性差,而脂肪族醛类化合物得到的(口片)呐醇产率较低,在同样的条件下,酮类化合物不能顺利进行(口片)呐偶合反应.     

金属锌促进羰基化合物水相嚬呐偶合反应

报道了一种简便、有效的水相嚬呐偶合反应。在含有少量季铵盐或季磷盐的氯化铵水溶液中,用金属锌促进羰基化合物进行水相嚬呐偶合反应,其中加入的少量季铵盐或季磷盐有助于显著提高反应产率,嚬呐醇产率由53%提高到87%。但嚬呐偶合反应的产率受羰基周围环境的立体位阻影响较大,在此条件下,金属锌可有效地促进芳香族醛化合物进行水相嚬呐偶合反应,得到产率较高的嚬呐醇,但非对映异构体选择性差,而脂肪族醛化合物得到的嚬呐醇产率较低,在同样条件下,酮类化合物不能顺利进行嚬呐偶合反应。     

甲醇／C4烃在Ga／HZSM—5催化剂上偶合反应过程的研究

甲醇／低碳烃偶合转化是基于热中和原理而提出的新反应过程，以碳四烯混合物作原料，考察了其与甲醇在Ｇａ／ＨＺＳＭ－５催化剂上偶合转化制备芳烃联产低碳烯烃的反应条件，并探讨了反应过程的作用机理。     

吡啶-N-氧化物的C—C键交叉偶联反应研究进展

吡啶-N-氧化物直接C—C键交叉偶联反应已成为一种功能化吡啶的重要手段,综述了吡啶-N-氧化物的C—C键交叉偶联反应的最新研究进展.     

Cobalt- and nickel-catalyzed regio- and stereoselective reductive coupling of alkynes, allenes, and alkenes with alkenes

Transition-metal-catalyzed coupling of two different C-C pi components through a metallacycle intermediate is a highly atom economical method to construct C-C bonds in organic synthesis. The metal-catalyzed coupling of an alkene and alkyne generally gives an Alder-ene or reductive coupling product. In this article, we focus on the cobalt- and nickel-catalyzed reductive coupling of alkynes, allenes, and alkenes with alkenes. These reductive coupling reactions provide convenient methods for the synthesis of various alkenes, dienes, functionalized alkanes, lactones, lactams, and cyclic alcohols in a highly regio- and stereoselective manner. A chemselective formation of metallacyclopentene intermediate from the two different C-C pi components and a low-valence metal species plays a key role for the high regio- and stereoselectivity of the catalytic reaction.     

Formation of naphthalene, indene, and benzene from cyclopentadiene pyrolysis: a DFT study

Four new reaction pathways for polycyclic aromatic hydrocarbon growth from cyclopentadiene pyrolysis are proposed and investigated using the B3LYP/6-31G(d,p) level of theory. These pathways allow for the production of indene, naphthalene, and benzene through intramolecular addition, C-H beta-scission, and C-C beta-scission reaction mechanisms, respectively. Results show that the intramolecular addition channel is favored at low temperatures, and the C-H beta-scission channel and the newly identified C-C beta-scission pathway become significant when the temperature increases. These results are in qualitative agreement with the experimental results previously obtained by this research group indicating that the main product at low temperature is indene, while benzene and naphthalene production dominate at the high-temperature end.     

NMR investigations on the proline-catalyzed aldehyde self-condensation: Mannich mechanism, dienamine detection, and erosion of the aldol addition selectivity

The proline-catalyzed self-condensation of aliphatic aldehydes in DMSO with varying amounts of catalyst was studied by in situ NMR spectroscopy. The reaction profiles and intermediates observed as well as deuteration studies reveal that the proline-catalyzed aldol addition and condensation are competing, but not consecutive, reaction pathways. In addition, the rate-determining step of the condensation is suggested to be the C-C bond formation. Our findings indicate the involvement of two catalyst molecules in the C-C bond formation of the aldol condensation, presumably by the activation of both the aldol acceptor and donor in a Mannich-type pathway. This mechanism is shown to be operative also in the oligomerization of acetaldehyde with high proline amounts, for which the first in situ detection of a proline-derived dienamine was accomplished. In addition, the diastereoselectivity of the aldol addition is evidenced to be time-dependent since it is undermined by the retro-aldolization and the competing irreversible aldol condensation; here NMR reaction profiles can be used as a tool for reaction optimization.     

AlCl3-mediated direct carbon-carbon bond-forming reaction of alpha-hydroxyketene-S,S-acetals with arenes and synthesis of 3,4-disubstituted dihydrocoumarin derivatives

A simple and efficient AlCl(3)-mediated C-C coupling reaction between readily available alpha-hydroxyketene-S,S-acetals and various arenes via direct substitution of the hydroxy group in alcohols has been developed. On the basis of this C-C coupling reaction, a series of bio- and pharmacologically important 3,4-disubstituted dihydrocoumarins, difficult to obtain by other methods, were prepared in high yields by a sequential Friedel-Crafts alkylation and intramolecular annulation reaction of alpha-hydroxyketene acyclic-S,S-acetals with phenols under mild conditions.     

Competition between C-C and C-H Activation in Reactions of Neutral Nickel Atom with Cycloalkanes （n = 3-7）

A theoretical investigation of the reaction mechanisms for C-H and C-C bond activation processes in the reaction of Ni with cycloalkanes C,,H2. （n = 3-7） is carried out. For the Ni ＋ CnH2, （n = 3, 4） reactions, the major and minor reaction channels involve C-C and C-H bond activations, respectively, whereas Ni atom prefers the attacking of C-H bond over the C-C bond in CnH2n （n = 5=7）. The results are in good agreement with the experimental study. In all cases, intermediates and transition states along the reaction paths of interest are characterized, It is found that both the C-H and C-C bond activation processes are proposed to proceed in a one-step manner via one transition state. The overall C-H and C-C bond activation processes are exothermic and involve low energy barriers, thus transition metal atom Ni is a good mediator for the activity of cycloalkanes CnH2n （n = 3 -7）.     

Ni-catalyzed, ZnCl(2)-assisted domino coupling of enones, alkynes, and alkenes

A Ni(0)/ZnCl(2) system effectively promotes the coupling of enones and alkene-tethered alkynes. In the reaction with 1,6-enynes, the oxidative cyclization of Ni(0) species on enones across the alkyne part followed by ZnCl(2)-promoted cleavage generates alkenylnickel intermediates. Subsequent migratory insertion of the tethered alkene occurs with 5-exo-cyclization. When the resulting sigma-alkylnickel intermediates have beta-hydrogen atoms, the reaction terminates by beta-hydrogen elimination to provide cyclopentane derivatives. On the other hand, a sigma-alkylnickel intermediate that does not have beta-hydrogen atoms undergoes the insertion of a second alkene unit to cause a domino effect via a three-fold C-C bond formation process with and without the cleavage of one C-C bond.     

A simple, short, and flexible synthesis of viridiofungin derivatives

Described herein is a simple, flexible, and efficient synthesis of the skeleton of the viridiofungins, a family of microbial secondary metabolites. The synthesis utilizes an asymmetric aldol reaction of a chiral oxazolidinone, a diastereoselective alkylation of a chiral 1,3-dioxolan-2-one, and a geometrically selective alkene cross-metathesis reaction as the key C-C bond-forming steps.     

Di-2-pyridylmethylamine-based palladium complexes as new catalysts for Heck,Suzuki, and Sonogashira reactions in organic and aqueous solvents

A new palladium-dipyridylmethylamine complex is an excellent catalyst for C-C bond-forming processes such as the Heck, Suzuki, and Sonogashira reactions in organic and aqueous solvents under homogeneous conditions. [reaction: see text]     

Palladium-catalyzed, stereoselective rearrangement of a tetracyclic allyl cyclopropane under arylation

The first example of a pi,sigma domino-Heck reaction under concomitant rearrangement of the tetracyclic allylcyclopropane endo,exo-bishomobarrelene (5) is reported; the stereoselective reaction proceeds via an intramolecular insertion of a primarily-formed carbopalladation intermediate into a strained cyclopropane C-C sigma-bond, giving 9.     

Structural studies on cycloadducts of furan, 2-methoxyfuran, and 5-trimethylsilylcyclopentadiene with maleic anhydride and N-methylmaleimide

The early stages of the retro-Diels-Alder reaction are clearly apparent in the structures of the cycloadducts formed between furan or 5-trimethylsilylcyclopentadiene with maleic anhydride and N-methylmaleimide. The degree of lengthening of the C-C bonds that break in this reaction is clearly related to the known reactivity of these cycloadducts toward this reaction. In the structures of the cycloadducts 21 and 22 derived from 2-methoxyfuran, the early stages of an alternative fragmentation reaction are apparent, consistent with the reactivity of these compounds in solution.