纳米氧化镍浓度对磁性准固态染料敏化太阳能电池的影响

以琼脂糖为聚合物基质,N-甲基-2-吡咯烷酮(NMP)为溶剂,磁性纳米氧化镍颗粒作为添加剂用于制备染料敏化太阳能电池(DSSC)的磁性聚合物电解质。通过SEM与离子电导率测试研究不同纳米氧化镍掺杂浓度对磁性聚合物电解质的影响,并对相应的染料敏化太阳能电池进行光电性能测试与电化学交流组抗谱(EIS)测试,结果表明:1.0wt%的纳米氧化镍掺杂浓度为最优掺杂浓度,在此浓度下聚合物电解质的表面形貌较为平整,同时电解质具备最高离子电导率(2.43×10-3S.cm-1);染料敏化太阳能电池的光电效率与电子寿命均随着纳米氧化镍掺杂浓度的增加而先增加后降低,并都在纳米氧化镍掺杂浓度为1.0wt%达到最大,此时电池的光电效率为1.63%、开路电压为0.57 V、短路电流密度为5.8 mA.cm-2、填充因子为0.53。     

新型梳状共聚物在准固态染料敏化太阳能电池中的应用及其对电子复合的影响

合成了乙烯基咪唑碘盐(VImI)和聚乙二醇单甲醚甲基丙烯酸酯(PEGMA)的梳状共聚物.利用VImI/PEGMA共聚物制备了准固态聚合物电解质.通过光电流密度-电压(J-V)曲线和电导率测定以及电化学阻抗分析,探讨了基于此电解质的染料敏化太阳能电池的电荷传输与界面电子转移机制.结果表明,VImI/PEGMA共聚物可以有效抑制TiO2/电解质界面电子复合并提高TiO2导带能级,敏化电池的光伏性能并不完全取决于电解质的电导率.通过考察共聚物中VImI与PEGMA单元的摩尔比与开路电压的关系,发现共聚物对电子复合的抑制作用主要源于VImI链段.此外,开路电压衰减(OCVD)和瞬态光电流测试结果说明,共聚物能够提高TiO2薄膜的电子寿命,而且对陷阱电子能级的分布具有调节作用.当共聚物在电解质中的质量分数为50%,VImI与PEGMA的摩尔比为5.0时,准固态染料敏化太阳能电池于100mW·cm-2光强下获得了4.10%的光电转换效率.     

有机染料敏化网状二氧化钛纳米纤维微孔膜太阳能电池研究

利用静电纺丝技术, 在TiO₂纳米粒子上电纺一层网状TiO₂纳米纤维微孔膜作为光散射层, 并在TiO₂纳米粒子中掺杂少量MgO以抑制电子和空穴的复合, 得到TiO₂纳米纤维/纳米粒子复合光阳极用于染料敏化太阳能电池. 将这种光阳极分别与有机三苯胺染料SD2, SD3或钌染料N719及鹅脱氧胆酸(CDCA)共敏化时, 在AM 1.5 (100 mW/cm²)的模拟太阳光照射下, 染料敏化太阳能电池的光电转换效率达到6.35%～8.85%. 同时, 使用半固态电解质可以达到液态电解质90%的光电转换效率.     

准固态染料敏化太阳能电池中电解质体系的研究进展

染料敏化太阳能电池(Dye Sensitized Solar Cells)是新一代将光能转化为电能的重要能源转换装置。它具有低廉的材料和器件制作成本、较高的光电转换效率以及电池制作过程简单等诸多优点,拥有广阔的应用空间和巨大的潜在商业价值,因而吸引了广泛的研究关注。染料敏化太阳能电池主要由染料敏化的光阳极、电解质和对电极三个部分组成。其中,电解质作为染料敏化太阳能电池的重要组成部分,其对离子的传导和扩散,以及促进染料再生的能力极大地影响着染料敏化太阳能电池的电荷传输和光电性能。本文聚焦于染料敏化太阳能电池准固态电解质体系,主要从聚合物凝胶电解质、有机小分子凝胶电解质和无机纳米粒子凝胶电解质三大方面综述讨论了该研究领域当前最新研究进展,并对其未来研究趋势进行了展望。     

聚合物/TiO2杂化纳米纤维微孔膜的制备及其在染料敏化太阳能电池中的应用

利用静电纺丝技术,制备了不同的聚合物/TiO2杂化纳米纤维微孔膜,吸附液体电解质后形成聚合物/TiO2杂化纳米纤维微孔膜准固态电解质,应用于制备准固态染料敏化太阳能电池(DSSCs).测试了电纺聚合物纳米纤维微孔膜电解质的吸液率、孔隙率、离子电导率等参数,研究了纳米纤维微孔膜准固态电解质DSSCs的光伏性能.结果显示,TiO2的掺入可提高聚合物/TiO2杂化纳米纤维微孔膜对液态电解质的浸润扩散性能,从而提高纳米纤维微孔膜对液态电解质的吸附能力.组装的DSSCs的光电转换效率可达液态电解质的90%以上,并具有较好的长期工作稳定性.     

染料敏化纳米晶体TiO2太阳能电池的对电极结构

通过对染料敏化纳米晶体TiO₂太阳能电池的对电极的结构进行改进,设计了一种可大容量储存电解质和补充电解质的新型对电极结构.当染料敏化纳米晶体TiO₂太阳能电池因液态电解质挥发泄漏而失效时,可以对其进行液态电解质的及时补充,从而使失效的染料敏化纳米晶体TiO₂太阳能电池重新恢复工作.该新型对电极结构为解决染料敏化纳米晶体TiO₂太阳能电池由于液态电解质泄漏导致的寿命降低问题提供了一种新的解决方法.     

纳米复合全固态聚膦腈电解质

为了进一步提高聚合物电解质的室温离子电导率和锂离子的迁移数,通过对纳米二氧化硅的表面修饰,并采用可聚合的带氧化乙烯-氧化丙烯共聚侧链取代的聚膦腈大单体制备了纳米复合的全固态电解质.通过X射线光电子能谱,扫描电镜,差热扫描分析对纳米复合电解质的性能和形貌进行了分析,并通过交流阻抗考察了电解质与电极间的界面稳定性,用循环伏安表征了电解质的电化学稳定窗口,考察了锂盐含量对电解质离子电导率的影响,测试了电解质的离子电导率随温度的关系,并对锂离子的迁移数进行了测定.研究结果表明,通过纳米复合的方法,提高了聚合物电解质的离子电导率,降低了界面电阻,提高了锂离子迁移率.     

纳米阻燃氢氧化镁/聚氧化乙烯复合聚合物电解质

合成了纳米氢氧化镁作为聚氧化乙烯(PEO)基聚合物电解质的增塑剂和阻燃剂,并对其进行X射线衍射(XRD)、透射电子显微镜(TEM)和热重(TG)分析研究.制得的氢氧化镁为片状六方晶体,尺寸在50-80nm之间,纳米氢氧化镁在340℃时开始热分解.对纳米氢氧化镁/PEO复合聚合物电解质的电化学研究结果显示:纳米氢氧化镁/PEO复合聚合物电解质的离子电导率随着添加纳米氢氧化镁的质量分数的增加先增大后减小,其在5%-10%之间时,复合聚合物电解质的离子电导率达到最大值.纳米氢氧化镁的添加使复合聚合物电解质的阳极氧化电位有一定程度的提高,纳米氢氧化镁具有改善PEO阳极抗氧化能力的作用.     

N3敏化Ho3+离子修饰TiO2纳米晶电极的光电化学性质

研究了Ho3+离子表面修饰对TiO2纳米晶电极光电性能的影响. TiO2表面氧化钬的存在一方面降低了染料和TiO2之间的电子注入速率, 而另一方面它也能够抑制电荷复合. 结果表明, 在TiO2纳米晶薄膜表面修饰一定厚度的Ho3+离子层, 在电极表面就形成了一个势垒, 能够有效抑制电极表面的电荷复合, 从而提高了染料敏化太阳能电池的光电压和光电转化效率. 在93.1 mW·cm-2白光照射下, TiO2/Ho-0.1 和TiO2/Ho-0.2(0.1 和0.2分别是修饰TiO2电极的Ho3+溶液的浓度, 单位是mol·L-1)两个电极的光电转化效率分别达到8.3%和7.6%, 与TiO2电极(7.2%)比较, 分别增大了15%和5%.     

N3敏化Ho~（3＋）离子修饰TiO2纳米晶电极的光电化学性质

研究了Ho3+离子表面修饰对TiO2纳米晶电极光电性能的影响.TiO2表面氧化钬的存在一方而降低了染料和TiO2之间的电子注入速率,而另一方面它也能够抑制电荷复合.结果表明,在TiO2纳米晶薄膜表面修饰一定厚度的HO3+离子层,在电极表面就形成了一个势垒,能够有效抑制电极表面的电荷复合,从而提高了染料敏化太阳能电池的光电压和光电转化效率.在93.1 mW·cm-2白光照射下,TiO2/Ho-0.1和TiO2/Ho-0.2(0.1和0.2分别是修饰TjO2电极的Ho3+液的浓度,单位是mol·L-1)两个电极的光电转化效率分别达到8.3%和7.6%,与TiO2电极(7.2%)比较,分别增大了15%和5%.     

染料敏化太阳电池用聚合物电解质

综述了本研究小组近年来用于染料敏化太阳电池中聚合物电解质的研究概况.设计合成了几类性能优良的聚合物电解质,较好地改进了液体电解质染料敏化太阳电池(DSSC)的使用稳定性,研究结果具有实际应用的价值,并提出了此领域研究今后的发展方向.     

The effects of polymer gel electrolyte composition on performance of quasi-solid-state dye-sensitized solar cells

Polymer gel electrolytes based on poly(acrylic acid)-poly(ethylene glycol) (PAA–PEG) hybrid have been prepared and applied to developed quasi-solid-state dye-sensitized solar cells (DSCs). PAA–PEG hybrid was synthesized by polymerization reaction. Quasi-solid-state DSCs were fabricated with synthesized PAA–PEG electrolyte. The effects of alkali iodides LiI, KI, and I₂ concentrations on liquid electrolyte absorbency and ionic conductivity of PAA–PEG were investigated. The evolution of the solar cell parameters with polymer gel electrolyte compositions was revealed. DSCs based on PAA–PEG with optimized KI/I₂ concentrations showed better performances than those with optimized LiI/I₂ concentrations. The electrochemical impedance spectroscopy technique was employed to examine the electron lifetime in the TiO₂ electrode and quantify charge transfer resistances at the TiO₂/dye/electrolyte interface and the counter electrode in the solar cells based on the PAA–PEG hybrid gels. A maximum conversion efficiency of 4.96% was obtained for DSCs using KI based quasi-solid electrolyte under 100 mW cm⁻². Our work suggests that KI can be the promising alkali metal iodide for improving the performance of PAA–PEG hybrid gel DSCs.     

Low molecular mass organogelator based gel electrolyte with effective charge transport property for long-term stable quasi-solid-state dye-sensitized solar cells

Stable quasi-solid-state dye-sensitized solar cells (DSC) were fabricated using 12-hydroxystearic acid as a low molecular mass organogelator (LMOG) to form gel electrolyte. TEM image of the gel exhibited the self-assembled network constructed by the LMOG, which hindered flow and volatilization of the liquid. The formation of less-mobile polyiodide ions such as I 3 (-) and I 5 (-) confirmed by Raman spectroscopy increased the conductivity of the gel electrolytes by electronic conduction process, which should be rationalized by the Grotthuss-type electron exchange mechanism caused by rather packed polyiodide species in the electrolytes. The results of the accelerated aging tests showed that the gel electrolyte based dye-sensitized solar cell could retain over 97% of its initial photoelectric conversion efficiency value after successive heating at 60 degrees C for 1000 h and device degradation was also negligible after one sun light soaking with UV cutoff filter for 1000 h.     

Quasi-solid-state dye-sensitized solar cells assembled by in-situ chemical cross-linking at ambient temperature

Cross-linked gel polymer electrolytes containing aluminum oxide nanoparticles are successfully prepared using in-situ chemical cross-linking at room temperature after injection of the gel precursor into a dye-sensitized solar cell (DSSC). This makes it possible to directly solidify the electrolyte in the cell without leakage of solvent and to maintain close interfacial contact with the porous TiO₂ electrode. The quasi-solid-state DSSC assembled with gel polymer electrolyte containing 20 wt.% Al₂O₃ particles yields an overall conversion efficiency of 5.25% under AM 1.5 illumination at 100 mW cm^{− 2}.     

A novel composite polymer electrolyte containing room-temperature ionic liquids and heteropolyacids for dye-sensitized solar cells

A novel composite polymeric gel comprising room-temperature ionic liquids (1-butyl-3-methyl-imidazolium-hexafluorophosphate, BMImPF₆) and heteropolyacids (phosphotungstic acid, PWA) in poly(2-hydroxyethyl methacrylate) matrix was successfully prepared and employed as a quasi-solid state electrolyte in dye-sensitized solar cells (DSSCs). These composite polymer electrolytes offered specific benefits over the ionic liquids and heteropolyacids, which effectively enhanced the ionic conductivity of the composite polymer electrolyte. Unsealed devices employing the composite polymer electrolyte with the 3% content of PWA achieved the solar to electrical energy conversion efficiency of 1.68% under irradiation of 50 mW cm⁻² light intensity, increasing by a factor of more than three compared to a DSSC with the blank BMImPF₆-based polymer electrolyte without PWA. It is expected that these composite polymer electrolytes are an attractive alternative to previously reported hole transporting materials for the fabrication of the long-term stable quasi-solid state or solid state DSSCs.     

Dye-sensitized solar cells employing amphiphilic poly(ethylene glycol) electrolytes

Poly(ethylene glycol) (PEG) was modified with a long alkyl acid to produce a self-organized amphiphilic polymer (amPEG). FT-IR and NMR spectroscopies confirmed the amPEG synthesis. This polymer was complexed with lithium iodide (LiI) and 1-methyl-3-propylimidazolium iodide (MPII) to prepare polymer electrolytes to be applied to dye-sensitized solar cells (DSSC). FT-IR studies showed that upon the addition of litium salt the free ether and ester carbonyl bands shifted towards lower wavenumbers, indicating the complexation of Li ions with oxygens on the amPEG. Alkylation and salt introduction reduced PEG crystallinity, as characterized by wide angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC). The ionic conductivities of the polymer electrolytes increased with increasing salt concentrations, and the energy conversion efficiency of DSSC reached 2.6% at 100 mW cm^?2 for amPEG/MPII system which is higher than amPEG/LiI. This may be due to the higher mobility of MPII ion than the lithium ion in the polymer electrolyte. The interfacial properties between electrolytes and electrodes were investigated using field-emission scanning electron microscopy (FE-SEM) and electrochemical impedance spectroscopy (EIS).     

添加剂对染料敏化太阳电池电解质性能的影响

以N-甲基咪唑、苯并咪唑、叔丁基吡啶和离子液体1-甲基-3-乙基咪唑三氟乙酸盐(EMITA)作为染料敏化太阳电池(DSCs)电解质溶液中的添加剂, 使用超微电极通过循环伏安法研究其对液体电解质中I-3和I-氧化还原行为的影响, 通过电化学阻抗谱研究了上述四种添加剂对Pt电极电解质界面的影响. 结果表明, 添加剂EMITA的加入使I-3在电解质中的扩散系数减小, Pt电极电解质界面上的界面传输电阻Rct增大, 电解质的电阻降低; 光伏性能测试表明, EMITA的添加提高了DSCs的开路电压和填充因子, 其DSCs的光电转换效率达到了5.72%.     

基于新型交联聚合物电解质的准固态染料敏化太阳能电池

采用柠檬酸(CA)交联聚乙二醇(oligo-PEG, 平均分子量M_w=200, 400, 1000, 2000), 合成具有可生物降解性能的聚柠檬酸-乙二醇(PCE)交联聚酯, 并以此为基体材料制备得到准固态的三维交联型PCE/LiI/I₂聚合物电解质. 采用红外吸收光谱(IR)、核磁共振氢谱(¹H-NMR)、扫描电镜(SEM)和Raman光谱分别对PCE基体的分子结构、聚合物电解质的微观形貌以及导电离子对的存在形式进行表征; 通过线性扫描伏安法(LSV)研究了聚合物电解质的离子扩散系数、电导率以及电池的输出电流-电压(I-V)性能. 结果表明, PEG的分子量影响PCE基体膜的微观形貌及其吸液性能, 从而影响聚合物电解质的离子导电性能及电池的光电性能: 随着PEG分子量M_w从200, 400, 1000增大到2000, PCE基体膜的结构变得疏松, 吸液率增加, 吸液溶胀后的基体中I-3的跃迁活化能降低, 导致电解质的电导率和电池的短路光电流密度随之增加; 在60 mW·cm^-2的入射光强下, 四种电解质对应电池的光电转化效率依次为3.26%、3.34%、4.26%和4.89%.     

Dependence of solar cell performance on the nature of alkaline counterion in gel polymer electrolytes containing binary iodides

Performance of dye-sensitized nano-crystalline TiO₂ thin film-based photo-electrochemical solar cells (PECSCs) containing gel polymer electrolytes is largely governed by the nature of the cation in the electrolyte. Dependence of the photovoltaic performance in these quasi-solid state PECSCs on the alkaline cation size has already been investigated for single cation iodide salt-based electrolytes. The present study reports the ionic conductivity dependence on the nature of alkaline cations (counterion) in a gel polymer electrolyte based on binary iodides. Polyacrylonitrile-based gel polymer electrolyte series containing binary iodide salts is prepared using one of the alkaline iodides (LiI, NaI, KI, RbI, and CsI) and tetrapropylammonium iodide (Pr₄NI). All the electrolytes based on binary salts have shown conductivity enhancement compared to their single cation counterparts. When combined with Pr₄NI, each of the Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺ cation containing iodide salts incorporated in the gel electrolytes has shown a room temperature conductivity enhancement of 85.59, 12.03, 12.71, 20.77, and 15.36%, respectively. The conductivities of gel electrolytes containing binary iodide systems with Pr₄NI and KI/RbI/CsI are higher and have shown values of 3.28, 3.43, and 3.23 mS cm⁻¹, respectively at room temperature. The influence of the nature of counterions on the performance of quasi-solid state dye-sensitized solar cells is investigated by assembling two series of cells. All the binary cationic solar cells have shown more or less enhancements of open circuit voltage, short circuit current density, fill factor, and efficiency compared to their single cation counterparts. This work highlights the importance of employing binary cations (a large and a small) in electrolytes intended for quasi-solid state solar cells. The percentage of energy conversion efficiency enhancement shown for the PECSCs made with electrolytes containing Pr₄NI along with Li⁺, Na⁺, K⁺, Rb⁺, and Cs⁺ iodides is 260.27, 133.65, 65.27, 25.32, and 8.36%, respectively. The highest efficiency of 4.93% is shown by the solar cell containing KI and Pr₄NI. However, the highest enhancements of ionic conductivity as well as the energy conversion efficiency were exhibited by the PECSC made with Li⁺-containing binary cationic electrolyte.